No description available.

The use of cell transplantation to treat enzyme deficiency disorders is limited by the immune response targeted against foreign tissue or the use of life-long immunosuppressants. Hiding cells from the immune system in an encapsulation device is promising. Cells encapsulated within an anionic calcium alginate hydrogel bead are protected through a semi-permeable membrane formed by polycation, poly-L-lysine (PLL). A final layer of alginate is added to hide the cationic PLL surface but this has proved to be difficult creating capsules which are prone to fibrotic overgrowth, blocking exchange of nutrients, waste and therapeutic enzymes through the capsule. For long term applications these capsules need to be both biocompatible and mechanically robust. This thesis aims to address the biocompatibility issue of high cationic surface charge by synthesizing polycations of reduced charge using N-(3- aminopropyl)methacrylamide hydrochloride (APM) and N-(2- hydroxypropyl)methacrylamide (HPM) and study the associated mechanical properties of the capsules using micropipette aspiration. Micropipette aspiration was applied and validated for alginate based capsules (gel and liquid core) to quantify stiffness. Varying ratios of APM were used to control the overall charge of the polycations formed while HPM was incorporated as a neutral, hydrophilic, nonfouling comonomer. The molecular weight (MW) was controlled by using reversible addition-fragmentation chain transfer (RAFT) polymerization. The biocompatibility of these polymers was tested by cell adhesion and proliferation of 3T3 fibroblasts onto APM/HPM copolymer functionalized surfaces and by solution toxicity against C2C12 myoblasts. The ability for the APM/HPM copolymers to bind to alginate and form capsules was also assessed, along with the integrity and stiffness of the capsule membrane with or without additional covalent cross-linking by reactive polyanion, poly(methacrylic acid-co-2-vinyl-4,4- dimethylazlactone) (PMV60). Thermo-responsive block copolymers of N-isopropylacrylamide (NIPAM) and 2- hydroxyethylacrylamide (HEA) were also synthesized as potential drug delivery nanoparticles, showing control over micelle morphology with varying NIPAM to HEA ratios. / Thesis / Doctor of Science (PhD) / The treatment of enzyme deficiency disorders by cell transplantation is limited by the immune attack of foreign tissue in absence of immunosuppressants. Cells protected in an encapsulation device has shown promise. Poly-L-lysine, a widely used membrane material in these protective capsules, binds to the anionic gel entrapping living cells because it is highly cationic. The high cationic charge is difficult to hide causing the immune system to build tissue around the capsule, preventing the encapsulated cells from exchanging nutrients and therapeutic enzymes. This thesis aims to replace poly-L-lysine by synthesizing a series of more biocompatible materials of decreasing cationic charge. These materials were studied for the ability to support tissue growth and form stable capsules. The membrane strength was measured using an aspiration method validated for these types of capsules. Reducing the cationic charge of the materials increased the biocompatibility of the capsule membrane but also made for weaker membranes.

The convergence of supramolecular and polymer sciences has led to the construction of analogs of traditional covalently-constructed polymeric structures and architectures by supramolecular methods. Host-guest complexations of polymers are also possible through well-defined synthesis of polymeric building blocks, for novel supramolecular polymers. Monotopic polymeric building blocks were synthesized by controlled radical polymerizations with a crown or paraquat initiator. The combinations of terminal and central functionalities of host and guest polymeric building blocks provided chain-extended and tri-armed homopolymers, and diblock and tri-armed copolymers. A supramolecular graft copolymer was formed from a main-chain poly(ester crown ether) and a paraquat terminated polystyrene. This comb-like copolymer was characterized by a large viscosity increase. A four-armed polystyrene-b-poly(n-butyl methacrylate) was synthesized from a pseudorotaxane macroinitiator derived from a complex of a crown-centered polystyrene and a dufunctional paraquat compound. A single peak with higher molecular weight from size exclusion chromatography proved the copolymer formation. Supramolecular interactions enhance the ionic conductivity of semi-crystalline ionic polymers; the ionic conductivity of a C₆-polyviologen and dibenzo-30-crown-10 mixture was 100 times higher than the polyviologen itself. However, ionic conductivities of amorphous polyviologens with polyethers were influenced only by glass transition temperature changes. New imidazolium ionic liquid monomers and imidazolium based polymers were synthesized for potential applications in electroactive devices, such as actuators. Structure-property relationships for pendant imidazolium polyacrylates and main-chain imidazolium polyesters were investigated. Terminal ethyleneoxy moeties enhanced ionic conduction 2~3 times; however, the alkyl chain length effect was negligible. For the imidazoium polyesters, higher ion conductivities result from 1) mono-imidazolium over bis-imidazolium, and 2) bis(trifluoromethanesulfonyl)imide polymers over hexafluorophosphate analogs. A semi-crystalline hexafluorophosphate polyester with C₁₀-sebacate-C₁₀, displayed 400-fold higher ionic conductivity than the amorphous C₆-sebacate-C₆ analogue, suggesting the formation of a biphasic morphology in the former polyester. New dicationic imidazolium salts have interesting features. 1,2-Bis[N-(N'-alkylimidazoilum)]ethane salts stack well in the solid state and possess multiple solid-solid phase transitions. They complex with dibenzo-24-crown-8 and a dibenzo-24-crown-8 based pyridyl cryptand with <i>K_a</i> = ~30 and 360 M¹, respectively. Some of these dicationic imidazolium salts have low entropies of fusion, typical of plastic crystals. These newly discovered imidazolium homopolymers have ionic conductivities up to 10⁴ (S cm⁻¹); however, better properties are still required. Well-designed block copolymers should provide both good electrical and mechanical properties from bicontinuous morphologies, such ion channels. / Ph. D.

Notre équipe de recherche a récemment développé les premiers inhibiteurs d’une enzyme à DDE, la transposase MOS1, une enzyme analogue à l’intégrase du VIH-1. Ces molécules, de type bisfurylmaléimides, ont également montré une efficacité contre les activités enzymatiques de l’intégrase du VIH. En se basant sur ces résultats, nous avons entrepris la synthèse de nouveaux bisfurylmaléimides dans le but d’identifier de nouveaux inhibiteurs de l’intégrase et de proposer de nouvelles molécules dans la lutte contre le virus responsable du SIDA. L’originalité de notre démarche est l’utilisation de la transposase MOS1 comme modèle pour concevoir nos molécules. Les méthodologies utilisées pour accéder à ces molécules font essentiellement appel à la chimie catalysée par des métaux de transition mais aussi à des réactions de chimie hétérocyclique telles que des réactions de Mitsunobu, de Knoevenagel ou encore de Horner-Wadsworth-Emmons. L’ensemble des molécules synthétisées a fait l’objet d’une évaluation de leurs activités inhibitrices sur la transposase MOS1 et l’intégrase du VIH-1. Leurs propriétés antivirales contre le VIH ont également été évaluées. Parallèlement à ces travaux, nous nous sommes intéressés à la réactivité du noyau maléimide dans des réactions de couplage pallado-catalysées et plus particulièrement dans des couplages de Sonogashira. / Our research team has recently developed the first inhibitors of a DDE enzyme, MOS1 transposase, an enzyme similar to the HIV-1 integrase. These molecules, having a bisfurylmaleimide structure, also showed efficacy against enzymatic activities of HIV integrase. Based on these results, we undertook the synthesis of new bisfurylmaleimides in order to identify new integrase inhibitors and propose new molecules in the fight against the virus that causes AIDS. The originality of our approach is the use of MOS1 transposase as a model for designing our molecules. Methodologies used to access these molecules are essentially involving chemistry catalyzed by transition metals but also reactions of heterocyclic chemistry such as Mitsunobu, Knoevenagel or Horner-Wadsworth-Emmons reactions. All synthesized molecules has been evaluated for their inhibitory activities on the MOS1 transposase and HIV-1 integrase. Their antiviral properties against HIV were also evaluated. Parallel to this work, we investigated the reactivity of the maleimide core in palladium-catalyzed cross-coupling reactions especially in Sonogashira couplings.

Διερευνήθηκε η δέσμευση/αποδέσμευση ιόντων Cu(II) ή/και αντίθετα φορτισμένων επιφανειοδραστικών ενώσεων από συμπολυμερή τύπου κτένας. Ο κεντρικός σκελετός ήταν το πολυ(ακρυλικό νάτριο), PANa, ενώ οι πλευρικές αλυσίδες ήταν το Πολυ(Ν,Ν-διμεθυλακρυλαμίδιο) και το πολυ(Ν-Ισοπροπυλακρυλαμίδιο). Η συμπλοκοποίηση των συμπολυμερών με τα ιόντα Cu(II)σε υδατικό περιβάλλον διερευνήθηκε με θολομετρία, ιξωδομετρία, φασματοφωτομετρία UV-Vis, δυναμική σκέδαση φωτός, ιχνηθέτηση με φθορίζοντες ιχνηθέτες και προσδιορισμό του ζ-δυναμικού. Σε επόμενο στάδιο διερευνήθηκε η δυνατότητα σχηματισμού τριμερών συμπλόκων ΡAΝa/Cu(II)/επιφανειοδραστικής ένωσης σε υδατικό περιβάλλον. Από τη φυσικοχημική μελέτη των συστημάτων σε συνάρτηση του pΗ, ελήφθησαν σημαντικές πληροφορίες σχετικά με τον ανταγωνισμό των δύο ειδών (ιόντα Cu(II)ή ιόντα επιφανειοδραστικής ένωσης) να σχηματίσουν σύμπλοκα με το PANa. Ως τελικό στάδιο, παρασκευάστηκαν αδιάλυτα στο νερό υβριδικά υλικά πολυμερούς/Cu(II)ή πολυμερούς/Cu(II)/επιφανειοδραστικής ένωσης. Έπειτα από διερεύνηση της συμβατότητας/αναμιξιμότητάς τους με εμπορικές μήτρες που χρησιμοποιούνται συνήθως στη βιομηχανία χρωμάτων, ορισμένα από αυτά ενσωματώθηκαν σε πραγματικά χρώματα. / The binding/release of Cu(II) ions or/and surfactants from comb-type copolymers was studied. The backbone was poly(sodium acrylate), PANa, whereas the side chains were poly(N, N-Dimethylacrylamide) and Poly9N-Isopropylacrylamide). The complexation of these copolymers with Cu(II) ions in water, was studied by turbidimetry, viscometry, UV-Vis fasmatophotometry, dynamic light scattering, fluorescense probing and ζ-potential. As a next step, the possible formation of ternary PANa/Cu(II)/surfactant complexes in water was studied. From the physiocochemical studies with pH, important information was taken as far as the competition of the two species (Cu(II) ions and surfactant) to form complexes with PANa is concerned. As a next step, water-insoluble hybrid polymer/Cu(II) or polymer/Cu(II)/surfactant materials were produced. After studies upon the compatibility/mischibility of the hybrid materials with matrices that are usually used in paints, some of the materials were incorporated to paints.

Les phénomènes d’adsorption interviennent dans les processus géochimiques gouvernant ainsi le transport des contaminants. Par ailleurs, les variations de température sont susceptibles d’influencer significativement leur comportement vis-à-vis de la surface des minéraux. Aussi, l'influence de la température sur la sorption doit être étudiée afin de mieux appréhender le devenir des éléments dans l'environnement. Dans cette optique, l'interaction entre un ion modèle, l'uranyle et deux minéraux a été étudiée. Dans un premier temps, un composé méthodologique, la monazite, a été choisi afin de déterminer la démarche à suivre pour étudier l'influence de la température sur la sorption de l'uranyle dans trois milieux plus ou moins complexants. Puis, des tests préliminaires ont été réalisés pour étudier la sorption de l'uranyle sur un composé d'intérêt industriel, la magnétite, en appliquant la démarche mise en place. Le solide a d'abord été caractérisé d'un point de vue massif puis les caractéristiques acido-basiques de sa mise en suspension dans les trois électrolytes (NaClO4, NaNO3 et Na2SO4) ont été étudiées en fonction de la température. Les constantes d'équilibre associées aux réactions de déprotonation des sites de surface ont été déterminées entre 25°C et 95°C par modélisation de courbes de titrages potentiométriques. Les simulations ont été effectuées en limitant au maximum le nombre de degrés de liberté du système. Le modèle 1-pK a donc été préféré au modèle 2-pK en raison du nombre de paramètres ajustables plus limité dans ce modèle. Des contraintes expérimentales telles que le pH de point de charge nulle ou les enthalpies déterminées par mesure directe des chaleurs associées par microcalorimétrie de mélange ont été imposées pour déterminer les constantes d'équilibre acido-basiques. La sorption de l'uranyle en fonction du pH sur le même intervalle de température a été étudiée en alliant l'acquisition de données macroscopiques telles que les sauts de sorption et la spéciation en solution à une étude structurale menée par analyse par spectrofluorimétrie laser permettant l'identification des espèces sorbées. La simulation des sauts de sorption permettant d'accéder aux constantes associées aux réactions de sorption a été réalisée en imposant les caractéristiques acido-basiques préalablement déterminées. Des mesures directes, par microcalorimétrie de mélange, des chaleurs mises en jeu lors de la sorption de l'uranyle ont permis de tester la validité de la loi de Van't Hoff sur ce phénomène. La même démarche a été suivie pour étudier l'influence de la température sur la sorption de l'uranyle sur la magnétite en milieu NaClO4 et NaNO3. Cependant, l'étude structurale par spectrofluorimétrie laser n'a pu être réalisée en raison de la couloration noire de la magnétite. / The migration of radiotoxic elements in the geosphere is mainly regulated by chemical parameters which control the partitioning of the elements between mineral phases and aqueous solutions. Variation in temperature may affect the retention properties of a mineral surface and requires a careful investigation in order to understand the radionuclides behavior in the geosphere. In this way, the interaction mechanisms between uranium(VI) and two minerals (LaPO4 and Fe3O4) have been studied. In a first step, the monazite (LaPO4) has been chosen as methodological solid in order to clearly define all the different stages needed to completely characterize the influence of temperature on the sorption phenomena. To reach that goal, three media, more or less complexants towards aqueous uranyl and the mineral surface, have been considered. Physico-chemical as well as surface acid-base properties of the solid surface have been studied by considering three electrolytes (NaClO4, NaNO3 and Na2SO4) and temperatures ranged from 25°C to 95°C. The point of zero charge has been found to be identical for perchlorate and nitrate media (pHPZC=2.1) but it was found to be one pK unit higher for the sulfate medium indicating a sorption of the background electrolyte ions. The reaction heats associated to the hydration of the solid have been measured by using microcalorimetry and the nature of the reactive surface sites has been determined by carrying out Time-Resolved Laser-Induced Fluorescence Spectroscopy (TRLFS). On the basis of these experimental constraints, the titration curves obtained for the monazite suspensions were fitted by using the Constant Capacitance Model and the 1-pK model was preferred to characterize the surface charge evolution, due to the limited number of adjustable parameters. The surface protonation constants being determined, the behavior of U(VI) towards the monazite surface in the three electrolytes has been investigated. On the basis of both U(VI) speciation in solution and the results of a structural study carrying out by using TRLFS together with calorimetric measurements, the sorption edges have been modeled and the corresponding sorption constants determined. Since these values take into account a wide number of experimental results (both structural and thermodynamical ones) they appear to be accurate and could be extrapolated more confidently to other physico-chemical conditions. The experimental approach being validated with the methodological solid, preliminary tests have been carried out to study uranyl sorption onto a second substrate, the magnetite, more relevant than monazite in the field of radionuclides migration in the geosphere.

Corrosion of metallic materials is a natural process, and our study shows that even in an alkaline environment severe corrosion may occur on a carbon steel surface. While corrosion cannot be stopped it can be retarded. Many of the traditional anti-corrosion approaches such as the chromate process are effective but hazardous to the environment and human health. Mefp-1, a protein derived from blue mussel byssus, is well known for its extraordinary adhesion and film forming properties. Moreover, it has been reported that Mefp-1 confers a certain corrosion protection for stainless steel. All these facts indicate that this protein may be developed into corrosion inhibitors with ‘green’, ‘effective’ and ‘smart’ properties. In this study, a range of surface-sensitive techniques have been used to investigate adsorption kinetics, film forming and film compaction mechanisms of Mefp-1. In situ atomic force microscopy (AFM) enables the protein adsorption on substrates to be visualized, whereas the ex situ AFM facilitates the characterization of micro- and nano-structures of the protein films. In situ Peak Force AFM can be used to determine nano-mechanical properties of the surface layers. The quartz crystal microbalance with dissipation monitoring (QCM-D) was used to reveal the build-up of the Mefp-1 film on substrates and measure the viscoelastic properties of the adsorbed film. Analytical techniques and theoretical calculations were applied to gain insights into the formation and compaction processes such as oxidation and complexation of pre-formed Mefp-1 films. The electron probe micro analyzer (EPMA) and X-ray photoelectron spectroscopy (XPS) were utilized to obtain the chemical composition of the surface layer. Electrochemical impedance spectroscopy (EIS) measurements were performed to evaluate the corrosion inhibition efficiency of different forms of Mefp-1 on carbon steel substrates. The results demonstrate that Mefp-1 adsorbs on carbon steel surfaces across a broad pH interval, and it forms a continuous film covering the substrate providing a certain extent of corrosion protection. At a higher pH, the adsorption is faster and the formed film is more compact. At neutral pH, results on the iron substrate suggest an initially fast adsorption, with the molecules oriented preferentially parallel to the surface, followed by a structural change within the film leading to molecules extending towards solution. Both oxidation and complexation of the Mefp-1 can lead to the compaction of the protein films. Addition of Fe3+ induces a transition from an extended and soft protein layer to a denser and stiffer one by enhancing the formation of tri-Fe3+/catechol complexes in the surface film, leading to water removal and film compaction. Exposure to a NaIO4 solution results in the cross-linking of Mefp-1, which also results in a significant compaction of the pre-formed protein film. Mefp-1 is an effective corrosion inhibitor for carbon steel when added to an acidic solution, and the inhibition efficiency increases with time. As a film-forming corrosion inhibitor, the pre-formed Mefp-1 film provides a certain level of corrosion protection for short term applications, and the protection efficiency can be significantly enhanced by the film compaction processes. For the long term applications, a thin film composed of Mefp-1 and ceria nanoparticles was developed. The deposited Mefp-1/ceria composite film contains micro-sized aggregates of Mefp-1/Fe3+ complexes and CeO2 particles. The Mefp-1/ceria film may promote the further oxidation of ferrous oxides, and the corrosion resistance increases with time. Moreover, phosphate ions react with Fe ions released from the surface and form deposits preferentially at the surface defect sites. The deposits incorporate into the Mefp-1/ceria composite film and heal the surface defects, which result in a significantly improved corrosion inhibition effect for the Mefp-1/ceria composite film in both initial and prolonged exposure situations / <p>QC 20130610</p>

Iron-mediated oxidative cyclisation provides an efficient approach to pyrano[3,2-a]carbazole alkaloids. Thus, improved routes to girinimbine and murrayacine as well as the first total syntheses of O-methylmurrayamine A and 7-methoxymurrayacine are reported. Asymmetric epoxidation of girinimbine led to (−)-trans-dihydroxygirinimbine and the assignment of its absolute configuration. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

The object of this work is to obtain a fundamentalunderstanding of the principal issues concerning the handlingof an aqueous WC-Co powder suspension. The WO3 surface layer on the oxidised tungsten carbidepowder dissolves at pH&gt;3 with the tungsten concentrationincreasing linearly with time. Adding cobalt powder to thetungsten carbide suspension resulted in a significant reductionof the dissolution rate at pH&lt;10. Electrokinetic studiesindicated that the reduced dissolution rate may be related tothe formation of surface complexes; the experiments showed thatCo species in solution adsorb on the oxidised tungsten carbidepowder. The surface forces of oxidised tungsten and cobalt surfaceswere investigated using the atomic force microscope (AFM)colloidal probe technique. The interactions at various ionicstrengths and pH values are well described by DLVO theory. Theadsorption of cobalt ions to tungsten oxide surfaces resultedin an additional non-DLVO force and a reduced absolute value ofthe surface potential. It was shown that the adsorption ofpoly(ethylene imine) (PEI) to the WO3 surfaces induces anelectrosteric repulsion. The properties of spray-dried WC-Co granules were related tothe WC primary particle size, and the poly(ethylene glycol)(PEG) binder and PEI dispersant content in aqueous WC-Cosuspensions. The granule characterisation includes a new methodfor measuring the density of single granules. The increase inthe fracture strength of granules produced from suspensionsthat were stabilised with PEI was related to a more densepacking of the WC-Co particles. The AFM was used to study the friction and adhesion ofsingle spray-dried WC-Co granules containing various amounts ofPEG binder. The adhesion and friction force between two singlegranules (intergranular friction) and between a granule and ahard metal substrate (die-wall friction) have been determinedas a function of relative humidity. The granule-wall frictionincreases with binder content and relative humidity, whereasthe granule-granule friction is essentially independent of therelative humidity and substantially lower than the granule-wallfriction at all PEG contents. Key words:Hard Metal, Cemented Carbide, WC-Co, TungstenCarbide, Cobalt, Oxidation, Dissolution, Surface Complexation,XPS, AFM, Colloidal Probe, Hamaker Constant, Cauchy, WO3,CoOOH, ESCA, Zeta-Potential, Surface Potential, Poly(ethyleneimine), PEI, Suspension, van der Waals, Steric, Spray-Dried,Poly(ethylene glycol), Strength, Density, Friction, Adhesion,Granule, PEG, Pressing, FFM. / <p>QC 20161027</p>

L’albumine sérique humaine (HSA) est une protéine connue pour ses propriétés de transport exceptionnelles et son contenu élevé en ponts disulfure. L’étude de sa dynamique conformationnelle représente un défi important dans la compréhension de ses fonctions physiologiques. Le but de notre travail a été d’étudier cette dynamique conformationnelle et de comprendre le rôle des ponts disulfure dans le maintien de la structure native de la protéine. Notre analyse est basée sur des simulations de dynamique moléculaire couplées à des analyses par composantes principales. Outre la validation de la méthode de simulation les résultats fournissent de nouveaux éclairages sur les principaux effets de la réduction des ponts disulfure dans les albumines sériques. Les processus de dépliement/repliement protéique ont été détaillés. La prédiction de la structure réduite d’équilibre a également fait l’objet d’une attention particulière. Une étude détaillée de la dynamique conformationnelle globale de la protéine ainsi que celle des deux sites principaux de complexation a été effectuée. D’éventuels effets allostériques entre ces deux sites ont été recherchés. Les résultats théoriques obtenus ont été discutés avec les données expérimentales disponibles / Human serum albumin (HSA) is a protein known for its exceptional transport properties and its high content of disulfide bridges. The study of the conformational dynamics represents a major challenge in the comprehension of its physiological functions. The aim of our work was to study the conformational dynamics and to understand the roleof disulfide bonds in the stability of the native protein structure. Our analysis is based on simulations of molecular dynamics coupled with principal component analysis. Beyond the validation of the simulation method, the results provide new insights on the main effects of the disulfide bonds reduction in serum albumins. Protein unfolding/refolding processes were detailed. A special attention is paid to the prediction of the reduced structure at the equilibrium. A detailed study of the global protein conformational dynamics as well as the two main binding sites were performed. Possible allosteric effects between these two sites were researched. The theoretical results have been discussed with the available experimental data