Orientador: Adalberto Bono Maurizio Sacchi Bassi / Tese (doutorado) - Universidade Estadual de Campinas, Instituto de Química / Made available in DSpace on 2018-08-25T02:48:09Z (GMT). No. of bitstreams: 1 Reis_MartinaCosta_D.pdf: 1200753 bytes, checksum: 9318dbbd02e3d4660c4a6806e68dad7d (MD5) Previous issue date: 2014 / Resumo: Este trabalho descreve a termodinâmica de sistemas eletroquímicos. Explorando os princípios da teoria constitutiva, algumas hipóteses ad hoc e, em especial, o princípio de entropia Müller-Liu, modelos termo-eletroquímicos são propostos para soluções eletrolíticas e para as regiões de bulk e dupla camada de um sistema eletroquímico. A influência das interações íon-íon e íon-solvente sobre a dinâmica da mistura é considerada através da termodinâmica de contínuos polares e as equações de balanço são apropriadamente postuladas. Além disso, equações fenomenológicas são apresentadas para uma solução eletrolítica diluída e isotrópica e as condições para o equilíbrio termodinâmico local do bulk e da dupla camada são investigadas. Comparando-se as desigualdades residuais de entropia obtidas para cada região, foi demonstrado que alguns processos, tais como os fenômenos de difusão térmica, termoeletricidade e eletroforese, desenvolvem-se somente na dupla camada. Consequentemente, o estado de equilíbrio termodinâmico local na dupla camada requer condições termodinâmicas mais severas do que no bulk. Apesar das equações constitutivas serem as mais simples possíveis, os modelos constitutivos propostos para as regiões de dupla camada e bulk são fisicamente consistentes e mais abrangentes do que os modelos eletroquímicos usuais, visto que as equações e relações termodinâmicas obtidas não se limitam às condições limites e nem de equilíbrio. Portanto, a descrição termodinâmica mostrada neste trabalho pode estimular químicos e engenheiros químicos a usar a abordagem contínua no estudo da mobilidade iônica em meios bio e geológicos, fluxos de íons e de outras espécies químicas através de membranas e processos cujas transferências de calor e massa são intensificadas por campos eletromagnéticos / Abstract: This work concerns the thermodynamics of electrochemical systems. Exploiting the principles of constitutive theory, few expedient assumptions, and, in special, the Müller-Liu entropy principle, a thermo-electrochemical continuum model is proposed for electrolyte solutions as well as for the bulk and double layer regions of an electrochemical system. The influence of ion-ion and ion-solvent interactions on the mixture dynamics is taken into account through the thermodynamics of polar materials and balance laws for an electrochemical system are accordingly stated. In addition, phenomenological equations are schemed for a dilute and isotropic electrolyte solution, and the conditions for local thermodynamic equilibrium of bulk and double layer regions are investigated. Comparing the residual entropy inequalities obtained for each region of an electrochemical system, it is shown that some mechanisms develop only in the double layer, such as the thermal diffusion, thermoelectricity and electrophoresis phenomena. As a consequence, the local thermodynamic equilibrium state in the double layer requires stricter conditions than in the bulk. Although the constitutive equations are the simplest possible, the constitutive models proposed for the double layer and bulk regions are physically consistent and more comprehensive than the usual models since the emerging equations do not constrain themselves to equilibrium neither limiting conditions. Therefore, the thermodynamic description provided in this work may stimulate chemists and chemical engineers to take advantage of it to study the flow of ions and other chemical species across cell membranes, ionic mobility in bio and geological media, and processes whose heat and mass transfers are enhanced by electromagnetic fields / Doutorado / Físico-Química / Doutora em Ciências

Bankruptcies have been a sensitive topic all around the world for over 50 years. From their research, the authors have found that only a few bankruptcy studies have been conducted in Sweden and even less on the topic of bankruptcy prediction models. This thesis investigates the performance of the Altman, Ohlson and Zmijewski bankruptcy prediction models. This research investigates all Swedish companies during the years 2017 and 2018.  This study has the intention to shed light on some of the most famous bankruptcy prediction models. It is interesting to explore the predictive abilities and usability of those three models in Sweden. The second purpose of this study is to create two models from the most significant variable out of the three models studied and to test its prediction power with the aim to create two models designed for Swedish companies.  We identified a research gap in terms of Sweden, where bankruptcy prediction models have been rather unexplored and especially with those three models. Furthermore, we have identified a second research gap regarding the time period of the research. Only a few studies have been conducted on the topic of bankruptcy prediction models post the financial crisis of 2007/08.  We have conducted a quantitative study in order to achieve the purpose of the study. The data used was secondary data gathered from the Serrano database. This research followed an abductive approach with a positive paradigm. This research has studied all active Swedish companies between the years 2017 and 2018. Finally, this contributed to the current field of knowledge on the topic through the analysis of the results of the models on Swedish companies, using the liquidity theory, solvency and insolvency theory, the pecking order theory, the profitability theory, the cash flow theory, and the contagion effect. The results aligned with the liquidity theory, the solvency and insolvency theory and the profitability theory. Moreover, from this research we have found that the Altman model has the lowest performance out of the three models, followed by the Ohlson model that shows some mixed results depending on the statistical analysis. Lastly, the Zmijewski model has the best performance out of the three models. Regarding the performance and the prediction power of the two new models were significantly higher than the three models studied.

Denna rapport beskriver projektet Managing education research data. Utförandet av projektet är en del av kursen TDDD96 - Kandidatprojekt i programvaruutveckling våren 2024. Beställaren av systemet är Lucija Batinovic, doktorand på FUSA (IBL) vid Linköpings universitet. Rapporten behandlar frågeställningarna hur en applikation som tillämpar konceptet Community-augmented meta-analysis (CAMA) kan utvecklas för att maximera kundvärdet, vilka lärdomar som kan dokumenteras från programvaruprojektet som är intressanta till framtida projekt, vilket stöd man kan få genom att skapa och följa upp en systemanatomi samt hur en databas kan utformas för att optimera söktid. Målet med applikationen är att ge en samlad plattform för delning av data från öppen vetenskap kopplad till lärande, en plattform för så kallad Community-augmented meta-analysis. Slutsatsen blev att värde skapades för kunden genom att analysera kundens krav och genom projektgruppens tekniska erfarenheter fylla på med fler krav för att möta kundens verkliga behov. De överförbara lärdomar som kunde dokumenteras var bland annat de processrelaterade erfarenheterna från den agila arbetsmetoden. Systemanatomins betydelse visade sig vara att den medför en förståelse för hur systemet ska fungera samt tydliggör beroenden inomsystemet. Slutligen konstaterades att en metod för att optimera söktiden i en databas kan vara normalisering.

Mon travail de création à la maîtrise s'est principalement développé autour de la question des relations interpersonnelles dans une pratique de la performance. J'y interroge la fragilité et l'instabilité des relations que nous entretenons avec les autres par le biais de propositions artistiques m'amenant à partager des expériences de rencontre avec les spectateurs. Ce texte présente le processus de création du travail artistique en retraçant le chemin de mes inspirations et l'émergence d'une conception personnelle de la relation à l'autre. J'y explique aussi le choix de la performance comme moyen d'expression artistique. Ce texte est divisé en trois parties qui permettent d'illustrer mes réflexions sur mon travail. Plus précisément, je spécifierai pourquoi et comment je réalise mon projet artistique sur ce thème subtil de la relation.

Diesel engines produce large amounts of nitrogen oxides (NOX) while running. Nitrogen oxides are highly toxic and also contribute towards the formation of tropospheric ozone. Increasingly stringent legislation regarding the amount of nitrogen oxides that are allowed to be emitted from diesel-powered vehicles has forced manufacturers of diesel-engines to develop after-treatment systems that reduce the amount of nitrogen oxides in the exhaust. One of the main components in such a system is selective catalytic reduction (SCR), where nitrogen oxides are reduced to diatomic nitrogen and water with the help of ammonia. A vital part of this process is the spraying of a urea-water-solution (UWS), which is needed in order to produce the reducing agent ammonia. UWS spraying introduces the risk of solid deposits (such as biuret, ammelide and ammeline) forming in the after-treatment system, should the flow conditions be unfavourable. Risk factors include high temperatures, but also low dynamics and high thickness of the resulting liquid film that forms as the UWS spray hits the surfaces of the after-treatment system. It is thus essential that manufacturers of SCR after-treatment systems have correct data on how much UWS that should be sprayed into the exhaust for any given flow condition. Experimental tests are thoroughly used to assess this but are very expensive and are thus limited to prototype testing during product development. When assessing a wider range of concepts and geometries early on in the product development stage, simulation tools such as computational fluid dynamics (CFD) are used instead. One of the most computationally heavy processes to simulate within a SCR after-treatment system is the UWS spray and its interaction with surfaces inside the after-treatment system, where correct prediction of the formation of solid deposits are of great importance. Most CFD models used for this purpose hold a relatively good level of accuracy and are utilized throughout the whole industry where SCR aftertreatment is applied. Despite this, these models are limited in the fact that they are only able to cover timescales in the scope of seconds to minutes while using a tolerable amount of computational power. However, the time spectrum for solid deposit formation is minutes to hours. Scania is one of Sweden’s biggest developers of SCR after-treatment, with the technology being incorporated directly into its silencers. AVL Fire is the main UWS spray simulation tool for engineers at Scania at the moment. One major drawback of using AVL Fire for UWS spray simulations is that it is deemed too time-consuming to set up new cases and too unstable during simulation, which makes it too costly in terms of expensive engineering hours. This project has investigated the potential of using STAR-CCM+ for UWS spray simulations at Scania instead. A standard method has been evaluated, as well as parameters that will prove useful in further investigations of a potential speedup method. The studied method in STAR-CCM+ is easy to setup and the simulation process is robust and stable. Various other perks come from using STAR-CCM+ as well, such as: a user-friendly interface, easy and powerful mesh-generation and great post-process capabilities. Several different parameters have been investigated for their impact on the studied method, such as mesh refinement of the spray injector area and the number of parcels injected every time-step through the spray injector (simply put the resolution of the spray). A possible speedup by freezing the momentum equations when allowed and lowering the amount of inner iterations has also been investigated. A handful of operating conditions have been studied for two different geometries. The attained simulation results display correlations with physical measurements, but further assessment for identifying the risk of solid deposit needs to be performed on the studied cases to assess the full accuracy of solid deposit prediction of the studied method. Recommendations for future work includes fully implementing and evaluating the speedup method available for spray simulations in STAR-CCM+ as well as directly comparing how the accuracy and performance of the method relates to that of the method used in AVL Fire for spray simulations. / Dieselmotorer producerar under körning stora mängder kväveoxider (NOx). Kväve-oxider är starkt giftiga föreningar som även bidrar till att öka mängden marknära ozon. Allt strängare lagstiftning gällande mängden kväveoxider som får släppas ut från fordon med dieselmotorer har lett till att tillverkare av dieselmotorer blivit tvingade att utveckla efterbehandlingssystem som renar avgasen från motorn. En av huvudkomponenterna i ett sådant system idag är selective catalytic reduction (SCR; på svenska selektiv katalytisk reduktion), där kväveoxider omvandlas till kvävgas och vatten med hjälp av ammoniak. För att producera ammoniak används en lösning av urea och vatten (t.ex. AdBlue®), som introduceras till efterbehandlingssystemet via spray. Denna process har dock en stor nackdel, då det under omvandlingsprocessen kan finnas risk för klumpbildning av ämnen som biuret, ammelid och ammelin ifall flödesförhållandena är ogynnsamma. Riskfaktorer för klumpbildning inkluderar höga temperaturer samt låg dynamik och hög tjocklek för den vätskefilm som bildas när sprayen med urea-lösning kommer i kontakt med ytor i efterbehandlingssystemet. Det är därför av stor vikt för tillverkare av efterbehandlingssystem som använder SCR att känna till hur mycket urealösning som kan sprayas in för varje givet flöde. Experimentella tester används till stor del för att utvärdera detta, men är väldigt dyra och kan endast göras för ett fåtal prototyper under en produkts utveckling. För att kunna utvärdera ett större antal koncept och geometrier tidigare i utvecklingsstadiet av en ny produkt används därför ofta datorkraft med simuleringsverktyg som CFD (Computational Fluid Dynamics). En av de mest beräkningstunga processerna att simulera i ett efterbehandlingssystem med SCR är sprayandet av urea-lösning och dess interaktion med ytor, där korrekta förutbestämmelser av huruvida det finns risk för klumpbildning eller inte är av stor betydelse. De flesta CFD modeller som används i detta syfte har förhållandevis god noggrannhet och används i stor utsträckning i den bransch där efterbehandling med SCR tillämpas. Däremot är dessa modeller begränsade i att de endast kan åstadkomma simuleringar (med en acceptabel mängd datorkraft) som sträcker sig i tidsintervallet sekunder till minuter. Bildningen av klump är dock en process som kan ta upp till flera timmar. Scania är en av Sveriges största tillämpare av SCR, då tekniken används i de efterbehandlingssystem som finns inbyggda i tillverkarens ljuddämpare. Scania använder främst AVL Fire för simulering av spray med urea. AVL Fire anses dock vara för tidskrävande vid skapelsen av nya simuleringsfall och för instabilt under simulering. Detta projekt har därför undersökt möjligheten att använda STAR-CCM+ för simulering av spray med urea hos Scania. Den metod i STAR-CCM+ som utvärderats är enkel att använda då nya simuleringsfall ska skapas, samtidigt som den är robust och stabil under simulering. Relevanta parametrar för en potentiell uppsnabbningsmetod har också undersökts. STAR-CCM+ i sin helhet är användarvänligt, där verktyget för att skapa och generera mesh är enkelt att använda såväl som kraftfullt när mer avancerade operationer krävs. Möjligheterna för postprocessing är väldigt smidiga för transienta förlopp, vilket är ett stort plus för simuleringar med urea-spray, vars injektion och resulterande processer är väldigt transienta skeenden i sig. Flera olika parametrar har undersökts, för att granska hur stor påverkan de har på prestandan och noggrannheten hos den studerade metoden. Två av dessa är tätheten av beräkningsnoder i den region där spray-munstycket är placerat samt antalet paket med urea-vatten lösning som injiceras varje tidssteg via spray-munstycket. En möjlig uppsnabbning av metoden, som går ut på att frysa ekvationerna för bevarelse av rörelsemängd (eng - momentum equations) när det är tillåtet och samtidigt minska antalet inre iterationer för varje tidssteg, har också undersökts. Ett flertal olika flödesförhållanden har också undersökts för två olika geometrier. De erhållna resultaten tyder på korrelation med data från fysiska experiment. Dock bör ytterligare hydrodynamiska utvärderingar tillämpas för att ordentligt kunna redogöra för hur väl STAR-CCM+ kan användas för att förutse risken för klump- bildning i en spray-process med urea-vatten lösning. Framtida arbete borde fokusera på att utvärdera den uppsnabbningsmetod som finns för spray-simuleringar i STAR-CCM+, samt direkt jämföra hur väl metodens noggrannhet och prestanda står sig gentemot den metod som används i AVL Fire för spray-simuleringar.

En Chine, à partir du XXe siècle, une tentative de modernisation dans la peinture chinoise ne cesse de la rapprocher de l‘Occident. Cette modernité, pour des artistes chinois, passe par l‘étude de la science et de la technique en Occident. Car l‘art en Occident est depuis longtemps lié à la science, fondé sur une technique et considéré comme une imitation du monde réel par la représentation de la perspective, de la couleur, de la lumière et de l‘ombre. En revanche, l‘art en Chine, de sa naissance à son autonomie, s‘est développé à partir d‘une interaction mutuelle, de l‘image de la nature : (la montagne, la forêt, la rivière...) et de la philosophie, la littérature, la poésie, la calligraphie… Du fait qu‘une expression due sentimentale aux artistes lettrés s‘attache à la fusion de l‘harmonie entre l‘homme et la nature. Mais, comment est-ce que ces deux notions, de l‘héritage traditionnel et de la modernité occidentale, s‘articulent-elles dans l‘art chinois lors de l‘introduction de la science et la technique de l‘art occidental ? La fréquentation de l‘occident par les artistes chinois le conduit-il à un rejet de ses propres valeurs au profit d‘une occidentalisation ? Ou bien une fusion s‘est-elle manifestée, fondant un art académique chinois ? Enfin, comment la synthèse chinoise de l‘art occidental et de la tradition traverse-t-elle les bouleversements politiques de la Chine au XXe siècle ? / In China, from the twentieth century, in an attempt to modernize Chinese painting isn't stopping to get closer to the West. This modernity, for Chinese artists, passes through the study of science and technology in the West. But how do these two concepts, the traditional legacy and Western modernity, have articulated in modern Chinese painting? A frequentation of the West by the Chinese Artistes has entrained a rejection of its own values in favour of Westernization? Or a merger has been manifested, founding a Chinese academic art? Finally, how the synthesis of Chinese and Western art tradition has crossed the political upheavals of the twentieth century in China?

Dans le cadre du projet LIU, vise à augmenter la puissance des injecteurs du LHC, le CERN PS Booster (PSB) sera mis à jour avec un système d'injection d'échange de charge H- et son énergie d'injection sera portée de 50 MeV à 160 MeV pour obtenir la luminosité du faisceau nécessaire pour le LHC High-Luminosity Upgrade. Effets de charge d'espace comme pertes de faisceau et incrément d’émittance transversale à l'injection vont être les principales limites vers la réalisation de la haute luminosité souhaitée. Des études sur la dynamique du faisceau en présence de charge d'espace afin d'évaluer les performances du PSB après la mise à niveau ont été effectuées. La première partie du travail consiste de mesures dans la présente machine, pour étudier les effets de charge d'espace et son interaction avec les résonances et d'avoir un ensemble de données pour le code benchmarking. Le code choisi pour le suivi du faisceau en présence de charge d'espace est PTC-Orbit (et PyOrbit). Les études de convergence numériques nécessaires sont présentées conjointement avec les études de la comparaison des simulations avec les mesures dans la machine. Une fois évalué le code et ses limites, les prévisions pour l'injection dans le PSB à 160 MeV avec des poutres de luminosité élevé sont livrés en termes de pertes de faisceau et incrément d’émittance. Ces études comprennent l'optimisation du point de fonctionnement, la compensation des résonances et/ou la correction de chromaticité en tenant compte des erreurs magnétiques attendus dans la machine. / As part of the LHC Injector Upgrade Project, the CERN PS Booster (PSB) will be upgraded with a H- charge exchange injection system and its injection energy will be raised from 50 MeV to 160 MeV to obtain the beam brightness required for the LHC High-Luminosity Upgrade. Space charge effects like beam losses and transverse emittance blow-up at injection are expected to be the main limitations towards the achievement of the required high brightness. Studies of beam dynamics in presence of space charge in order to evaluate the performances of the PSB after the Upgrade have been performed. The first part of the work consists of measurements in the present machine, to study the effects of space charge and its interplay with resonances and to have a good set of data for code benchmarking. The code chosen for the beam tracking in presence of space charge is PTC-Orbit (and PyOrbit). Necessary numerical convergence studies are presented together with a benchmark with the PSB measurements. Once assessed the code and its limitations, predictions for the 160 MeV injection with high- brightness beams are delivered in terms of beam losses and emittance blow-up. These studies include the optimization of the working-point, resonance compensation and/or chromaticity correction taking into account the expected magnetic errors in the machine.

研究目的 我國農地政策向以農地農有、農地農用，培養自耕農為主導。現行的農地政策，為保 護農業的生產條件，對農地有著嚴格的對人及對地的雙重管制。唯隨經濟環境改變， 近來屢有議者提出「小農經營制度，已不適於經濟原則，應由農企業公司購買農地， 實施企業化的大農經營，以促使農業升級」，則是否農地應該開放自由買賣？企業化 的大農經營是否適合當前台灣農業生產結構？開放農地買賣對農村社會又會造成什麼 影響？是為本文研究的目的。 主要參考文獻 現階段台灣農地問題之探討一劉泰英。經濟自由化與農地保護一陳明健。企業法人承 受農問題之探討一蘇志超。 研究方法 １•搜集次級資料探討當前農業問題與農業生產環境，以研究當前的農業問題之癥結 ，是否以開放農企業購買農地能有助於農業問題的舒解。 ２•以問卷調的方式，探討農家與農企業法人購地或售地意願，並進一步探討開放農 地買賣可能造成的影響。 研究內容 １•對於農業整體面，嘗試以農場經營規模，農業勞力結構轉換，農業機械化推行， 農產運銷、農業技術改良、作物、價格政策、土地管制等項目來分析。 ２•農家與企業家意願則以問卷內容為研究內容。

In this dissertation, the phrase 'Christian Citizen' refers to those Christians who possess a strong sense of identity, believing in Christianity and upholding the corresponding faith while fulfilling civic responsibility and loving one's country. Through gathering and investigating into the personal letters, works and reports and so on of Liu, this dissertation renders an in-depth exploration of Liu's analysis on national character, views on citizenship and his blueprint of the Civic Education Movement. More importantly, Liu did not resort to empty talk but walked the talk, integrating faith with daily life. Throughout his whole life, including, in the early days, the Career Guidance Movement and his work at the Y.M.C.A., his presidency at the University of Shanghai and fmally the righteous action in defending against Japanese invasion during the latter days, the quality of Liu, in being loyal to one's nation, displaying care and concern for the society, living out and walking one's faith whole-heartedly was evident. His life manifested the unification of the roles and functions of a Christian citizen of one's nation, with Christian citizenship vividly lived out. Special investigation would be made into a rarely noted work headed by Liu, Y.M.C.A.'s Civic Education Movement in the 1920s, under the slogan 'Saving Nation through Character'. The origins, effectiveness and characteristics of the Movement would be explored. This study concludes with revealing, through Liu's life, the characteristics of being a Christian citizen and examines the choice of the advocators of 'Saving Nation through Character'. / There is a saying: "One more Christian, one fewer Chinese". It implies a conflict between an Ascribed Identity (Chinese) and an Achieved Identity (Christian). The former is an inherited and irreversible blood relationship while the latter is acquired after birth, being a self-converted social role. Undeniably, conflict of identities brought about bewilderment and impact to Chinese Christians in late Qing and Early Republican eras, causing identity crisis. Role identification is a process of getting to know oneself in terms of cognition, attitude and behavior, affecting daily life and instilling meaning of life. Quite a number of researches in the past emphasized the mental struggle and torture suffered by Chinese Christians under the seemingly incompatibility of the two identities. However, identity crisis is by no means impossible to do away with or integrated. This research attempts to show that ascribed identity and achieved identity can be integrated harmoniously through identify negotiation. The case of Liu Zhan-en (1896--1938) clearly demonstrated roles of being a citizen on earth and that of heavenly kingdom need not be an either-or option. Christians are not only citizens of the eternal heavenly kingdom, but also contemporary citizens on earth. One can live in serving the Lord with piety while obeying legal requirements stipulated by the government. Devoted and sound citizenship could be harmoniously integrated to be 'Christian Citizen'. / 黃錦暉. / Adviser: Yuen Sang Leung. / Source: Dissertation Abstracts International, Volume: 73-03, Section: A, page: . / Thesis (Ph.D.)--Chinese University of Hong Kong, 2010. / Includes bibliographical references (p. 221-252). / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. [Ann Arbor, MI] : ProQuest Information and Learning, [201-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstracts in Chinese and English. / Huang Jinhui.

何翰庭 = The life and thought of Liu Liang-mo, a Pro-Communist Christian / Ho Hon-ting Johnson. / 論文(哲學碩士)--香港中文大學, 1998. / 參考文獻: leaves 105-119. / 中英文摘要. / He Hanting = The life and thought of Liu Liang-mo, a Pro-Communist Christian / Ho Hon-ting Johnson. / 論文撮要 --- p.ii / 鳴謝 --- p.iii / Chapter 第一章´Ø --- 前言 --- p.1 / Chapter 一´Ø --- 硏究動機 / Chapter 二´Ø --- 硏究回顧略述 / Chapter 三´Ø --- 參考資料與硏究方法 / Chapter 第二章´Ø --- 劉良模的生平略述 --- p.16 / Chapter 第三章´Ø --- 劉良模的救國思想 --- p.23 / Chapter 一´Ø --- 引言 / Chapter 二´Ø --- 劉良模早期的改良思想 / Chapter 三´Ø --- 對共產黨的認識和支持 / Chapter 四´Ø --- 留美九年的經歷 / Chapter 五´Ø --- 小結 / Chapter 第四章´Ø --- 劉良模的教會改造思想 --- p.57 / Chapter 一´Ø --- 引言 / Chapter 二´Ø --- 中共建國前中國基督徒對政治的態度 / Chapter 三´Ø --- 劉良模對新中國的認同 / Chapter 四´Ø --- 劉良模的三自改造思想 / Chapter 五´Ø --- 劉良模與基督教的改造 / Chapter 六´Ø --- 劉良模的「基督教思想」 / Chapter 七´Ø --- 小結 / Chapter 第五章´Ø --- 總結 --- p.99 / Chapter 一 ´Ø --- 「紅色基督徒」在新政權中的作用 / Chapter 二´Ø --- 宗教信仰對劉良模的意義 / 參考資料 --- p.105 / 附錄 --- p.120 / 劉良模的生平照片 / 民眾歌詠會情況 / 三十年代基督教青年會舊址現貌 / 美國賓夕凡尼亞大學圖書館檔案部回覆筆者信函：關於劉良模的檔案