Goal of the diploma thesis is to explain what does the term of controlled horizontal drilling mean and where it can be performed. Furthermore, it wants to show what to pay attention to during designing as well as during the actual pilot drill. Additionally, to show that pilot drill cannot be performed based on the project in all scenarios. Theoretical part of the thesis explains how the technology works and which auxiliaries are necessary to successfully perform controlled pressure. This technology is explained step by step in the practical part of the thesis to show how to proceed during the realization of controlled pressure.

Skanska Grundläggning in Region Special wishes to gain an increased understanding of the extent to which it differs in the wear of percussion hammers and pilot drill crowns, depending on which driving medium is used in down-the-hole drilling, as well as logistical and economic aspects depending on the chosen method. Down-the-hole drilling means that the hammer works down in the borehole and forms one of the components at the far end of the drill string together with a drill bit. The blow of the hammer is created by air or water at high pressure. The piling method that is examined is drilled steel pipe piles, which means that a steel pipe pile is driven into the ground in step with the hammer and the drill bit's advancement. Once the desired depth has been reached, the drill string with the drill bit is pulled out of the casing and then the steel pipe pile is filled with concrete. The study aims to examine the products' lifespans and repair intervals from several different perspectives and set them against reality, as well as what the different methods have for differences regarding logistics and establishment. This is to create a basis for future decisions on the most suitable method of down-the-hole drilling. The beginning of the study consisted of qualitative preliminary interviews to identify and create a problem formulation that was dealt with via a literature study, five semi-structured interviews, eleven questionnaires, internal data from drilling protocols and purchasing. The result shows that there is some difference in wear in the hammer depending on whether it is an air or water powered system, the wear appears in different places and can have an impact on the life of the hammer. The wear that occurs most frequently on drill bit is grinding on the buttons. Geotechnical differences for various projects are a significant factor in the service life of the equipment. An air hammer requires that the air constantly being mixed with lubricating oil and that an air compressor consumes more diesel compared to a high-pressure pump for the equivalent water hammer. The handling of water that is flushed out of the borehole is considered a concern. To reduce wear on water hammers and thus fewer replacements and more repairs, a drill bit intended for water powered down-the-hole hammer should be used. DTH-drilling with an air hammer is considered an industry standard and a certain skepticism towards a water powered system may indicate inexperience. / Skanska Grundläggning inom Region Special önskar att få en ökad förståelse hur vida det skiljer sig vid slitage av hammare och pilotborrkrona beroende på vilket drivande medium som nyttjas vid sänkhammarborrning, samt logistiska och ekonomiska aspekter beroende på vald metod. Sänkhammarborrning innebär att hammaren arbetar nere i borrhålet och utgör en av komponenterna längst ut på borrsträngen tillsammans med en borrkrona. Hammarens slag skapas av luft eller vatten i högt tryck. Pålningsmetoden som undersöks är borrade stålrörspålar, det betyder att ett foderrör drivs ned i marken i takt med hammaren och borrkronans framfart. Väl när önskat djup uppnåtts lyfts borrsträngen med hammaren och piloten upp ur foderröret för att sedan fyllas upp med betong. Studien syftar till att undersöka produkternas livslängder och reparationsintervall från flera olika perspektiv och ställa dem emot verkligheten, samt vad dem olika metoderna har för olikheter kring logistik och etablering. Detta är för att skapa underlag för framtida beslut om mest lämplig metod av sänkhammarborrning. Studiens begynnelse bestod av kvalitativa förintervjuer för att identifiera och skapa en problemformulering som avhandlades via en litteraturstudie, fem semistrukturerade intervjuer, elva frågeformulär, interna data från borrningsprotokoll och inköp. Resultatet visar att det förekommer viss skillnad i slitage i hammaren beroende på om det är en luft- eller vattenanläggning, slitaget visar sig på olika ställen och kan ha betydelse för hammarens livslängd. Det slitage som uppträder mest frekvent på piloter är nedslipning av stift. Geotekniska egenskaper för olika projekt utgör en betydande faktor för utrustningens livslängd. En lufthammare är i behov av att luften konstant beblandas smörjolja och att en luftkompressor förbrukar mer diesel jämfört med en högtryckspump för motsvarande vattenhammare. Efterhanteringen av vatten som spolas upp anses vara ett bekymmer. För att minska slitage på vattenhammare och därmed färre byten och mer reparationer bör en pilotborrkrona avsedd för vattendriven sänkhammarborrning nyttjas. Sänkhammarborrning med lufthammare anses som branschstandard och en viss skepticism mot en vattendriven anläggning kan tyda på oerfarenhet.

Driven by the need to use mineral resources more sustainably, and the increasing complexity of ore deposits still available for commercial exploitation, the acquisition of quantitative data on mineralogy and microfabric has become an important need in the execution of exploration and geometallurgical test programmes. Hyperspectral drill-core scanning has the potential to be an excellent tool for providing such data in a fast, non- destructive and reproducible manner. However, there is a distinct lack of integrated methodologies to make use of these data through-out the exploration and mining chain. This thesis presents a first framework for the use of hyperspectral drill-core scanning as a pillar in exploration and geometallurgical programmes. This is achieved through the development of methods for (1) the automated mapping of alteration minerals and assemblages, (2) the extraction of quantitative mineralogical data with high resolution over the drill-cores, (3) the evaluation of the suitability of hyperspectral sensors for the pre-concentration of ores and (4) the use of hyperspectral drill- core imaging as a basis for geometallurgical domain definition and the population of these domains with mineralogical and microfabric information.:Introduction Materials and methods Assessment of alteration mineralogy and vein types using hyperspectral data Hyperspectral imaging for quasi-quantitative mineralogical studies Hyperspectral sensors for ore beneficiation 3D integration of hyperspectral data for deposit modelling Concluding remarks References

Corrosion fatigue is a common failure mechanism in rock drilling components and many othermechanical parts subjected to cyclic loads in corrosive environments. A crucial part in the design ofsuch components resides in the selection of the right materials for the application, which ideallyinvolves testing and comparison of their performance under working conditions. The present work was performed with the purpose of designing a corrosion-fatigue testing methodthat would allow the designer to compare the performance of different materials exposed to corrosionfatigue, permitting also the comparison with results from dry fatigue testing. The method was designedfor rotating-bending machines. Two different steel grades were used during the work, one throughhardened and one case hardened. The effect of these heat treatments and of shot peening overcorrosion-fatigue behaviour were studied using the proposed method. It was proven that the testing speed has a strong impact on the fatigue life of steel. It was found that,at a fixed stress level, the case hardened and shot peened steel reached 3X10^6 cycles at 2300 rpm,while it failed at only 5X10^5 cycles with a testing speed of 500 rpm. A large beneficial influence of theshot peening was demonstrated. It was also observed that, at fixed testing speed, the shot peening onthe through hardened steel can increase its fatigue strength from 190 MPa to 600 MPa under corrosionfatigue. Many cracks were found at the surface of the shot peened parts, which are arrested near thesurface by the compressive stress layer from the shot peening. It was also found that, for the non-shotpeened parts, case hardening had a slightly higher corrosion-fatigue strength than the throughhardened. This might be a result of the compressive stresses from carburization, or due to the highercore toughness of this steel grade.

This master's thesis aims to establish a foundation for model-based engineering of drill rigs through the development, evaluation, and utilization of simulation models. Specifically, the project focused on creating a simulation model of the hydraulic tramming system in the SmartRoc D65 surface drill rig. The uncalibrated model was validated against physical tests conducted on the SmartRoc T35 drill rig, and the results provided accurate predictions with some room for improvement. The model sets a basis for identifying power losses and future potential optimization through electrification. A modeling methodology was developed to aid in the development of other simulation models representing a physical system. The thesis highlights the strengths and limitations of a quasi-static model when applied to dynamic systems. The findings suggest areas for future improvement and underscore the importance of continuous model refinement to enhance calculation accuracy.

Dans le contexte du développement d’une agriculture durable, il est nécessaire d’optimiser le coût énergétique des opérations agricoles tout en garantissant des temps de travaux courts ainsi que la qualité des opérations réalisées. Cette question concerne en particulier l’opération du semis qui est déterminante pour la qualité de la future récolte. Les semoirs de grande capacité et à haute productivité conçus aujourd’hui se doivent d’être compatibles avec cet ensemble de contraintes. L’enjeu essentiel de cette thèse est donc d’élaborer une méthodologie innovante et utilisant des outils de modélisation dans le but de réduire la consommation énergétique des matériels de semis. En suivant cette logique, nous avons étudié quatre aspects clef de la conception des semoirs pneumatiques : la manœuvrabilité des semoirs poly-articulés, l’établissement des conditions du transport pneumatique des semences et des engrais, l’optimisation des systèmes de répartition des semences ou des engrais, et enfin les aspects énergétiques du mode d’introduction des semences dans le circuit pneumatique. Chaque modélisation a été précédée par une phase expérimentale de détermination des phénomènes majoritaires influençant le processus étudié. Ensuite une modélisation du processus étudié, basée sur la simulation des effets du phénomène majoritaire identifié a pu être mise en œuvre et des conclusions, appuyées par des essais expérimentaux, proposées quant à la conception des semoirs pneumatiques. L’étude de la manœuvrabilité des ensembles poly articulés a démontré qu’il était possible de proposer et de tester un modèle explicatif de prédiction de trajectoires adapté aux engins agricoles. Cette approche ouvre la voie à l’optimisation et à de nouvelles méthodes d’automatisation de manœuvres complexes, notamment des demi-tours en bout de champ. Il est par ailleurs possible de démontrer qu’une trémie en position arrière permet de réaligner plus rapidement la barre de semis après une manœuvre. L’étude des conditions du transport pneumatique a montré notamment que l’établissement de conditions de transport correctes au niveau des sorties de la tête de distribution conditionne l’ensemble de la conception du circuit de distribution de la matière. L’étude des systèmes de répartition des semences a permis d’expliquer l’origine des principaux défauts de répartition observés et notamment l’importance de l’adéquation entre le coude et la conduite verticale qui précède la tête de répartition des semences. Ces résultats ont ouvert la voie à l’étude de la mise en place de systèmes d’anticipation et de correction de ces défauts. Enfin l’étude comparée de deux systèmes d’introduction de la matière dans un circuit pneumatique a montré que du point de vue énergétique les systèmes pressurisés sont plus intéressants que les systèmes injecteurs. / In the context of sustainable farming, the optimization of the energy costs of agricultural operations allows shorter working times and high quality of the agricultural operations. This question relates particularly to the seeding. This operation one is decisive for the quality of the future harvest. The modern high capacity seed drills must be compatible with all the constraints. The main goal of this PhD thesis is thus to develop an innovative methodology, integrating the modeling tools, in order to reduce the energy consumption of the heavy seeding equipment. Thus, we explored four key aspects concerning air seed drill design: maneuverability of poly-articulated seed drills; establishment of the pneumatic conveying conditions of seeds and fertilizers; seed distribution accuracy optimization, and finally the energy aspects of the air stream loading systems. Each modeling was preceded by a preliminary experimental phase, defying the majority phenomena influencing the studied process. The modeling of the studied process and the conclusions (supported by experimental trials) have been proposed for the design of air seed drills. The study of maneuverability of poly-articulated agricultural machines showed that it was possible to get and test an explanatory model of trajectory prediction adapted for agricultural machines. This approach opens the way for optimization and automation of complex operations, including U-turns on headlands. We showed that a towed behind storage hopper (air-cart) allows faster realignment of the coulter bar after maneuvers. The study of pneumatic conveying conditions showed that the establishment of the correct conveying conditions in the outlets after the dispensing head defines the entire design of the distribution system. The study of seed distribution systems explains that the origin of the low distribution accuracy is caused in particular by the elbow and the vertical pipe before the dispensing head. These results open the way for the development of anticipation systems and correction of these defects. Finally the comparative study of two air-stream loading systems has showed that from the energy point of view the pressurized systems are more interesting than the injectors systems. / В рамках концепции устойчивого развития, необходимо учитывать энергетический аспект, сохраняя при этом эффективность использования рабочего времени и качества выполнения сельскохозяйственных операций. Особенно, это касается операции посева, определяющей в наибольшей степени будущий урожай. Современные широкозахватные зерновые сеялки и посевные комплексы вписываются в рамки устойчивого сельского хозяйства. Главной целью данной диссертации является разработка действенной методики проектирования пневматических сеялок, применяя методы моделирования и оптимизации, с целью уменьшения энергопотребления. Таким образом, мы использовали причинно-следственный подход для энергетической оптимизации четырех определяющих параметров: маневренность многозвеньевых посевных машин, обоснования необходимых условий пневмотранспорта, оптимизация распределения посевного материала, и ввода материала в магистральный трубопровод. В дополнение, снижение энергопотребления не должно сказываться на качестве выполнения технологического процесса посева. Моделирование каждого процесса, является следствием длительной экспериментальной фазы, посвященной определению наиболее значимых факторов, для каждого отдельного явления. В результате моделирований, симуляций и анализа, были составлены практические рекомендации, для конструкторов пневматических сеялок. Изучение маневренных характеристик многозвеньевых агрегатов позволило предложить и испытать физическую модель, позволяющую предопределить траекторию движение каждого звена машинно-тракторного агрегата. Такой подход позволяет автоматизировать выполнение наиболее сложных маневров (например, разворотов в конце гона). Кроме всего было показано, что заднеприцепные бункера позволяют более быстрое выравнивание агрегата после разворота. Изучение условий пневмотранспорта, позволило установить оптимальные, с точки зрения энергосбережения, параметры пневмотранспорта на выходе из распределительной головки, что послужило исходными данными для расчета характеристик пневмотранспорта в целом. Исследование процесса распределения семян в распределительной головке вертикального типа, позволило определить причины неравномерного распределения семян между выходными трубопроводами, в частности влияние отвода и вертикального трубопровода. На основании полученных данных, было предложена система устройств, позволяющих избежать возникновения завалов в системе, при минимальных энергопотерях. Сравнительные исследования двух систем ввода материала в магистральный трубопровод, позволили заключить, что питатели с наддувом являются менее энергоемкими по сравнению с питателями эжекторного типа.

The need for energy and the associated economic benefits from the oil and gas deposits found mainly in the Niger Delta region of Nigeria necessitated the exploration and exploitation activities being carried out by the oil and gas Companies. However, these exploration and exploitation activities due to their unpredictable nature have a huge potential for environmental pollution as been experienced in the form of oil spills, gas flaring, irresponsible disposal of waste and several other activities that have resulted in the environmental degradation of the Niger Delta region. In the light of these, the Federal Government of Nigeria having experienced the consequences of pollution of the environment during the Koko Toxic Waste Dump incident in the then Bendel State in 1987 established a regulatory body tasked with the responsibility of harmonizing the economic interest from the oil and gas exploration and exploitation activities with the sustainability of the natural environment by developing well structured and articulated policies aimed at guiding the operations of the oil and gas operators, track their compliance and administer appropriate punitive measures for non compliance. However, this research work which is aimed at evaluating the impact of the environmental protection policies in upstream oil and gas activities in the Niger Delta region, involved the use of questionnaires and interviews. These questionnaires were completed by the management and staff of three major oil and gas companies operating within the area, the Department of Petroleum Resources and members of the Host communities. The interview was carried out to provide relevant feedback on their assessment of the impact made by the environmental protection policies on the upstream oil and gas activities in their operational areas/host communities. The study however concluded that “Although there is a regulatory body tasked with the responsibility to develop, implement and track compliance of the environmental protection policies in the upstream oil industry, the body is ineffective and as such the impact of the environmental protection policies is inadequate. Appropriate informed recommendations on the improvement strategies to the identified gaps that resulted in the unfavorable conditions were also provided. / Thesis (M.Ing. (Development and Management Engineering))--North-West University, Potchefstroom Campus, 2011

The need for energy and the associated economic benefits from the oil and gas deposits found mainly in the Niger Delta region of Nigeria necessitated the exploration and exploitation activities being carried out by the oil and gas Companies. However, these exploration and exploitation activities due to their unpredictable nature have a huge potential for environmental pollution as been experienced in the form of oil spills, gas flaring, irresponsible disposal of waste and several other activities that have resulted in the environmental degradation of the Niger Delta region. In the light of these, the Federal Government of Nigeria having experienced the consequences of pollution of the environment during the Koko Toxic Waste Dump incident in the then Bendel State in 1987 established a regulatory body tasked with the responsibility of harmonizing the economic interest from the oil and gas exploration and exploitation activities with the sustainability of the natural environment by developing well structured and articulated policies aimed at guiding the operations of the oil and gas operators, track their compliance and administer appropriate punitive measures for non compliance. However, this research work which is aimed at evaluating the impact of the environmental protection policies in upstream oil and gas activities in the Niger Delta region, involved the use of questionnaires and interviews. These questionnaires were completed by the management and staff of three major oil and gas companies operating within the area, the Department of Petroleum Resources and members of the Host communities. The interview was carried out to provide relevant feedback on their assessment of the impact made by the environmental protection policies on the upstream oil and gas activities in their operational areas/host communities. The study however concluded that “Although there is a regulatory body tasked with the responsibility to develop, implement and track compliance of the environmental protection policies in the upstream oil industry, the body is ineffective and as such the impact of the environmental protection policies is inadequate. Appropriate informed recommendations on the improvement strategies to the identified gaps that resulted in the unfavorable conditions were also provided. / Thesis (M.Ing. (Development and Management Engineering))--North-West University, Potchefstroom Campus, 2011

Mechanical vibrations are inevitable in drilling operations. Torsional stick-slip vibrations are vibrations that occur in drilling columns, which are produced by periodic variations of torque and characterized by large fluctuations in the speed of the drill bit. These vibrations are dangerous, primarily by the cyclical characteristic of the phenomenon that by the amplitude of the same, which can cause fatigue of the pipe, failures in the components of the drill string, deformations in the walls of the well, excessive wear of the drill, low rate of penetration, and collapse of the drilling process. The frequency of these unwanted oscillations can be reduced by the application of automatic control techniques. The objective of this study is to evaluate through numerical simulations, the application of conventional control techniques, such as proportional-integral control (PI), and nonlinear, as the sliding mode control (SMC) and the input-output linearization control (IOLC), to eliminate the presence of stick-slip oscillation in drilling columns. The controllers are designed primarily to maintain a constant speed of rotation system, by manipulating engine torque, thereby inferentially control the speed of the drill, thus providing optimum operation conditions, beyond preserving system stability. Results of simulations using drill string torsional models of two degrees of freedom (2-DOF) and four degrees of freedom (4-DOF) show the performance of the proposed control systems, which are analyzed and qualitatively compared. / Vibrações mecânicas são inevitáveis nas operações de perfuração. Vibrações torcionais stick-slip são vibrações que ocorrem em colunas de perfuração, as quais são produzidas pelas variações periódicas de torque e caracterizadas por grandes oscilações da velocidade da broca. Estas vibrações são prejudiciais, mais pela característica cíclica do fenômeno que pela amplitude da mesma, podendo originar fadiga da tubulação, falhas nos componentes da coluna de perfuração, deformações nas paredes do poço, desgaste excessivo da broca, baixa taxa de penetração e, inclusive, colapso do processo de perfuração. A frequência destas oscilações indesejadas pode ser reduzida pela aplicação de técnicas de controle automático. O objetivo deste trabalho é avaliar, mediante simulações numéricas, a aplicação de técnicas de controle convencional, como o controle proporcional-integral (PI), e não linear, como o controle por modos deslizantes (SMC) e o controle por linearização entrada-saída (IOLC) para eliminar a presença de oscilações stick-slip em colunas de perfuração. Os controladores são desenvolvidos principalmente para manter constante a velocidade do sistema de rotação, mediante a manipulação do torque do motor, para assim controlar inferencialmente a velocidade da broca, fornecendo desta maneira condições ótimas de operação, além de preservar a estabilidade do sistema. Resultados das simulações, usando modelos torcionais de uma coluna de perfuração de dois graus de liberdade (2-DOF) e de quatro graus de liberdade (4-DOF), mostram o desempenho dos sistemas de controle propostos, os quais são analisados e comparados qualitativamente.

The aim of this thesis is the structural design small drilling rigs for drilling wells. Drilling rig will be used for drilling wells up to 200 mm diameter rotary drilling technology with irrigation water. The first part is a literature search of small drilling rigs. In the second part, then custom design a small drilling rig.