231 |
Modification of polymeric particles via surface grafting for 3D scaffold designNugroho, Robertus Wahyu Nayan January 2015 (has links)
Surface modification techniques have played important roles in various aspects of modern technology. They have been employed to improve substrates by altering surface physicochemical properties. An ideal surface modifying technique would be a method that is applicable to any kind of materials prepared from a wide range of polymers and that can occur under mild reaction conditions. The work in this thesis has utilized four main concepts: I) the development of a ‘grafting-from’ technique by covalently growing polymer grafts from particle surfaces, II) the presence of steric and electrosteric forces due to long-range repulsive interactions between particles, III) a combined surface grafting and layer-by-layer approach to create polyelectrolyte multilayers (PEMs) on particle surfaces to fabricate strong and functional materials, and IV) the roles of hydrophilic polymer grafts and substrate geometry on surface degradation. A non-destructive surface grafting technique was developed and applied to polylactide (PLA) particle surfaces. Their successful modification was verified by observed changes to the surface chemistry, morphology and topography of the particles. To quantify the aggregation behavior of grafted and non-grafted particles, force interaction measurements were performed using colloidal probe atomic force microscopy (AFM). Long-range repulsive interactions were observed when symmetric systems, i.e., hydrophilic polymer grafts on two interacting surfaces, and asymmetric system were applied. Electrosteric forces were observed when the symmetric substrates interacted at pH 7.4. When PEMs were alternately assembled on the surface of poly(L-lactide) (PLLA) particles, the grafted surfaces played a dominated role in altering the surface chemistry and morphology of the particles. Three-dimensional scaffolds of surface grafted particle coated with PEMs demonstrated high mechanical performance that agreed well with the mechanical performance of cancellous bone. Nanomaterials were used to functionalize the scaffolds and further influence their physicochemical properties. For example, when magnetic nanoparticles were used to functionalize the scaffolds, a high electrical conductivity was imparted, which is important for bone tissue regeneration. Furthermore, the stability of the surface grafted particles was evaluated in phosphate buffered saline (PBS) solution. The nature of the hydrophilic polymer grafts and the geometry of the PLLA substrates played central roles in altering the surface properties of films and particles. After 10 days of PBS immersion, larger alterations in the surface morphology were observed on the film compared with microparticles grafted with poly(acrylic acid) (PAA). In contrast to the PAA-grafted substrates, the morphology of poly(acrylamide) (PAAm)-grafted substrates was not affected by PBS immersion. Additionally, PAAm-grafted microparticulate substrates encountered surface degradation more rapidly than PAAm-grafted film substrates. / <p>QC 20151002</p>
|
232 |
Verslo sistemų modelio analizė, panaudojant agregatinę schemą ir loginį programavimą / Analysis of business systems REA model using aggregate schema and logic programmingJanušauskaitė, Živilė 06 June 2006 (has links)
This work presents business process analysis methodology which consists of presentation of the business processes created on the ground of the Resource Event Agent model by means of Piece–Linear Aggregate approach. The aggregate specification is analyzing using first order predicate logic while checking correctness by resolution method using logic programming based language Prolog. The work is concluded with concrete example of analysis of Resource Event Agent model based business process using the aggregate approach.
The novelty of this work
PLA (Piece-Linear Aggregate) model and the software tools, created on the ground of PLA (Piece-Linear Aggregate), are used the first time for business processes analysis that is defined using REA formalism. The use of such integrated models allows performing the automated analysis of general and individual properties (completeness, deadlock freeness, termination or cyclic behavior, boundedness) of defined business processes.
The main results are achieved:
• The methodology, that consists of presentation of the business processes created on the ground of the Resource Event Agent model by means of Piece–Linear Aggregate approach.
• Verification and validation of general and individual properties by using PLA and PROLOG language approach designed system that executes the analysis of aggregate specification.
• Implementing internal accounting controls as constraints in relational algebra, SQL and PROLOG language.
• Concrete... [to full text]
|
233 |
冷戰後中共南海戰略之研究 / The study of PRC strategy in South China Sea after Cold War顏清城 Unknown Date (has links)
冷戰結束之後,亞太地區的情勢因蘇聯內部共黨勢力的瓦解,而美國也因內部經濟問題無法負擔龐大的軍事費用而逐漸退出亞太,造成亞太地區的權力真空。這段期間內,中共已從1979年後的改革開放中取得綜合國力的提升,使中共得以在亞太地區竄起,逐漸發展成為區域強權,到現在被視為是美國潛在對手的世界強權。
中共之所以能取得今天的地位,主要靠的就是經濟的持續成長,然成長的動力乃來自於對能源之需求。目前中共為僅次於美國的全球第二大石油消費國,不過,這背後卻是高度依賴進口石油,其中80 %是經印度洋、麻六甲海峽及南海運抵大陸。從安全及經濟戰略的角度切入,中共沒有不掌握南海控制權的理由。這也道出後冷戰時期國家戰略的轉變,逐漸從陸地轉為重視海上的主權與安全,由此,中共在南海戰略布局,建立海軍基地,正是為了維護在南海的利益。
然而這樣的利益卻因為南海議題至終仍僵持不下,影響中共在南海戰略的目標與規畫,例如1982年的海洋公約法各自宣布經濟海域之範圍,使得各國主權的行使上具有相互重疊的部分,加上南海區域所蘊含著可觀的石油資源和航線價值,導致各個當事國皆不願放棄其主權的擁有。更不用說是境外勢力的介入,都使得南海問題變得更加複雜,進而改變中共在南海的戰略。
由此,本文將從這個錯綜複雜的問題中,先探討南海爭議的源頭與脈絡,有助於了解中共制定南海政策的背景。其次再從政治、經濟以及軍事方面來分析中共在南海的意圖和戰略,包括了在海南設立海軍基地、加速發展潛艦和航母等,研究中共海軍建軍的進程與南海戰略之關係。最後,再評估中共的南海戰略對區域安全所造成的衝擊,以及如何影響周邊國家和區外國家的行為。 / After the Cold War, there is no strong power in the Asia Pacific region as a result of the collapse of the communist Soviet Union while the United States (U.S.) had the economic problem which also made it to withdraw forces from that region. During this timeframe, the People’s Republic of China (PRC) has improved its overall national power by reforms and transformations since 1979 which gave it opportunity to raise and become regional superpower and is being recognized as a potential global superpower and adversary to the U.S.
PRC gained today’s position mainly through its continued economic growth and its growing momentum is constructed upon the energy requirement. Currently, PRC is the second largest oil consumer besides the U.S. and is heavily dependent upon the imports in which 80 percent come from the Indian Ocean, Strait of Malacca and the South China Sea. From the security and economics point of view, there is no reason PRC should give up the control of the South China Sea which explains its national strategy has shifted from continent thinking to focusing on the maritime sovereignty and security. Thus, PRC’s strategy in South China Sea and the construction of naval bases are to protect its interest in that area.
However, the territorial disputes of the South China Sea have influenced PRC’s strategic goal and planning. For instance, the United Nations Convention on the Law of the Sea in 1982 has the clause to announce economic zone which would overlap with neighboring countries. Furthermore, the potential undiscovered oil underneath the South China Sea and the critical sea lanes made relevant nations unwilling to give up their claims, not to say the involvement of foreign powers. All these have made the South China Sea a complicated issue which also affected PRC to change its South China Sea strategy.
Thereby, this paper will examine the origin of this complicated South China Sea issue which will help readers to understand the background of the forming of PRC’s South China Sea policy. Next, we will analyze PRC’s intent and strategy from political, economical and military aspects, including its set up of naval bases in that area and the speedup of the development of aircraft carrier and submarine, and also the relationship between PLA Navy’s buildup and the South China Sea. Finally, we will analyze the security impact to that area by PRC’s South China Sea strategy and how it affects peripheral nations’ behavior and nations outside that area.
|
234 |
Visualizing Interacting Biomolecules In SituWeibrecht, Irene January 2011 (has links)
Intra- and intercellular information is communicated by posttranslational modifications (PTMs) and protein-protein interactions, transducing information over cell membranes and to the nucleus. A cells capability to respond to stimuli by several highly complex and dynamic signaling networks provides the basis for rapid responses and is fundamental for the cellular collaborations required in a multicellular organism. Having received diverse stimuli, being positioned at various stages of the cell cycle or, for the case of cancer, containing altered genetic background, each cell in a population is slightly different from its neighbor. However, bulk analyses of interactions will only reveal an average, but not the true variation within a population. Thus studies of interacting endogenous biomolecules in situ are essential to acquire a comprehensive view of cellular functions and communication. In situ proximity ligation assay (in situ PLA) was developed to investigate individual endogenous protein-protein interactions in fixed cells and tissues and was later applied for detection for PTMs. Progression of signals in a pathway can branch out in different directions and induce expression of different target genes. Hence simultaneous measurement of protein activity and gene expression provides a tool to determine the balance and progression of these signaling events. To obtain this in situ PLA was combined with padlock probes, providing an assay that can interrogate both PTMs and mRNA expression at a single cell level. Thereby different nodes of the signaling pathway as well as drug effects on different types of molecules could be investigated simultaneously. In addition to regulation of gene expression, protein-DNA interactions present a mechanism to manage accessibility of the genomic DNA in an inheritable manner, providing the basis for lineage commitment, via e.g. histone PTMs. To enable analyses of protein-DNA interactions in situ we developed a method that utilizes the proximity dependence of PLA and the sequence selectivity of padlock probes. This thesis presents new methods providing researchers with a set of tools to address cellular functions and communication in complex microenvironments, to improve disease diagnostics and to contribute to hopefully finding cures.
|
235 |
慢性疼痛に関与するLPA合成酵素の役割とその阻害薬探索に関する研究田中, 景吾 23 March 2022 (has links)
京都大学 / 新制・課程博士 / 博士(薬学) / 甲第23847号 / 薬博第854号 / 新制||薬||242(附属図書館) / 京都大学大学院薬学研究科薬学専攻 / (主査)教授 金子 周司, 教授 土居 雅夫, 教授 竹島 浩 / 学位規則第4条第1項該当 / Doctor of Pharmaceutical Sciences / Kyoto University / DFAM
|
236 |
Ανάπτυξη και αξιολόγηση συστημάτων χορήγησης πεπτιδικών αντιγόνων HER-2/neu συνδεδεμένων με PLA μικροσφαίρεςΝίκου, Κωνσταντίνα 20 April 2011 (has links)
Παρά τις προόδους των κλασικών θεραπευτικών στρατηγικών για τον καρκίνο, η μεγάλη πλειοψηφία των ασθενών υποτροπιάζει και καταλήγει. Η ανάγκη για την αντιμετώπιση της νόσου με εναλλακτικό τρόπο οδήγησε στην ανάπτυξη ανοσοθεραπευτικών μεθόδων. Η ιδέα της ανοσοθεραπείας του καρκίνου έγινε γνωστή στα τέλη του δέκατου ένατου αιώνα, όταν ο William Coley χρησιμοποίησε ζωντανά στελέχη του πυογενούς βακτηρίου Streptococcus erysipelas με σκοπό τη δημιουργία γενικευμένης ανοσολογικής απάντησης, μέρος της οποίας να κατευθυνθεί ενάντια σε όγκους σαρκώματος. Οι σποραδικές θετικές αποκρίσεις που παρατήρησε οφείλονταν κατά πάσα πιθανότητα σε ενίσχυση της ανοσολογικής απάντησης από τις φλεγμονώδεις αντιδράσεις που προκάλεσαν τα βακτήρια. Για να επαχθεί όμως ειδική ανοσολογική απάντηση ενάντια σε όγκους απαιτείται να χαρακτηριστούν στα καρκινικά κύτταρα συγκεκριμένα αντιγόνα, ώστε να δύναται το ανοσολογικό σύστημα να τα αναγνωρίσει ως στόχους. Συνεπώς, το πρώτο βήμα στην προσπάθεια για ανοσοθεραπεία του καρκίνου είναι η απομόνωση αντιγόνων που εκφράζουν τα καρκινικά κύτταρα, τα οποία κατά προτίμηση να μην εκφράζονται από τους φυσιολογικούς ιστούς ώστε να αποφευχθεί η αυτοάνοση απάντηση.
Η ταυτοποίηση ογκοειδικών αντιγόνων, τα οποία αναγνωρίζονται από τα Τ λεμφοκύτταρα, έδωσε ιδιαίτερη ώθηση στην ανάπτυξη της κατευθυνόμενης από τα Τ κύτταρα ανοσολογικής απάντησης, στο επίπεδο τόσο της έρευνας της ανοσολογίας του καρκίνου, όσο και της κλινικής ανοσοθεραπευτικής εφαρμογής και έθεσε τις βάσεις για τη χρησιμοποίηση πεπτιδικών εμβολίων στην ανοσοθεραπεία του καρκίνου. Από την πληθώρα των γνωστών καρκινικών αντιγόνων, έχουν ταυτοποιηθεί κατά κύριο λόγο επίτοποι ικανοί να συνδεθούν με μόρια του μείζονος συμπλέγματος ιστοσυμβατότητας (MHC) τάξης Ι και συνεπώς να επάγουν την ενεργοποίηση των CD8+ T κυττάρων, δεδομένου ότι οι περισσότεροι όγκοι είναι θετικοί ως προς τα μόρια MHC τάξης Ι, αλλά αρνητικοί ως προς τα μόρια MHC τάξης ΙΙ. Επιπρόσθετα, τα CD8+ Τ κύτταρα μπορούν να καταστρέφουν τα καρκινικά κύτταρα απευθείας, μέσω της αναγνώρισης του συμπλόκου MHC
τάξης Ι-πεπτιδίου που εκφράζεται στην επιφάνεια του όγκου.
Τα τελευταία χρόνια, δεδομένης της αναγνώρισης του κεντρικού ρόλου των CD4+ Τ λεμφοκυττάρων στην έναρξη, οργάνωση και διατήρηση της ανοσολογικής απάντησης, έχουν αναγνωριστεί και αρκετοί επίτοποι που αναγνωρίζονται από μόρια MHC τάξης ΙΙ. Πρόσφατες κλινικές μελέτες και προκλινικά μοντέλα έδειξαν ότι ο εμβολιασμός με επιτόπους που δύνανται να συνδεθούν με μόρια MHC τάξης ΙΙ, οι οποίοι εμπεριέχουν αλληλουχίες σύνδεσης για τα μόρια MHC τάξης Ι, είναι αποτελεσματικοί στην ταυτόχρονη ανάπτυξη βοηθητικών και κυτταροτοξικών Τ λεμφοκυττάρων με μακρά διάρκεια ζωής in vivo.
Από τα γνωστά καρκινικά αντιγόνα, η πρωτεΐνη HER-2/neu παρουσιάζει το πλεονέκτημα της υπερέκφρασης σε ποικίλους τύπους καρκίνου, ενώ οι ασθενείς των οποίων όγκοι την υπερεκφράζουν παρουσιάζουν προϋπάρχουσα ανοσία ενάντια σε πεπτίδια αυτής. Η αυξημένη έκφρασή της στα καρκινικά κύτταρα και το γεγονός ότι πρόκειται για διαμεμβρανική πρωτεΐνη την καθιστούν στόχο για ανοσοθεραπευτικές προσεγγίσεις που περιλαμβάνουν τόσο κυτταρική όσο και χυμική ανοσία. Κλινικές έρευνες με χρήση πεπτιδίων της HER-2/neu έχουν δείξει την πρόκληση ανοσολογικής απάντησης στην πλειονότητα των ασθενών. Παρόλα αυτά, οι μεταστατικοί τύποι καρκίνου που υπερεκφράζουν τη συγκεκριμένη πρωτεΐνη παραμένουν μη θεραπεύσιμοι. Συνεπώς, υπάρχει άμεση ανάγκη για νέες θεραπευτικές προσεγγίσεις και στο σημείο αυτό η διερεύνηση των πιο ανοσογονικών τμημάτων της αλληλουχίας της πρωτεΐνης HER-2/neu, καθώς και της αντίδρασης των ασθενών σε αυτά, αποτελούν στόχο για ειδικές νέες αντικαρκινικές θεραπείες.
O εγκλεισμός του αντιγόνου σε μικροσφαίρες πολυ-γαλακτικού-γλυκολικού οξέος (PLGA) έχει δειχθεί ότι επάγει ισχυρή και παρατεταμένη ανοσοαπόκριση. Μέχρι σήμερα, δεν φαίνεται να έχει αναφερθεί μελέτη στην οποία να αναλύεται η επίδραση των χαρακτηριστικών του PLGA συμπολυμερούς και του σχήματος ανοσοποίησης στον τύπο της λαμβανόμενης ανοσοαπόκρισης μετά την χορήγηση PLGA μικροσφαιρών του αντιγόνου in vivo.
Στην παρούσα μελέτη διερευνήθηκε ο τύπος της ανοσοαπόκρισης που λαμβάνεται in vivo μετά την χορήγηση πεπτιδίων της HER-2/neu (πρότυπα αντιγόνα) συνδεμένων σε πολυ-γαλακτικού οξέος (PLA) και PLGA μικροσφαίρες. Τα πρότυπα αντιγόνα ήταν δύο:
* το πεπτίδιο GSPYVSRLLGICLTSTVQLVQL, που αντιστοιχεί στην περιοχή 778-799 της ογκοπρωτεΐνης HER-2/neu. Η πεπτιδική αυτή ακολουθία περιλαμβάνει τον κυτταροτοξικό επίτοπο CLTSTVQLV (789-797) σε συνδυασμό με τον T βοηθητικό (Th) επίτοπο GSPYVSRLLGICL (778-790) της συγκεκριμένης ογκοπρωτεΐνης.
* καθώς και το πεπτίδιο CLTSTVQLV (789-797), δηλαδή μόνο ο κυτταροτοξικός (CTL) επίτοπος.
Ως πειραματόζωα στην συγκεκριμένη περίπτωση χρησιμοποιήθηκαν HHD διαγονιδιακοί μύες, οι οποίοι εκφράζουν ανθρώπινα HLA-A2.1 μόρια ιστοσυμβατότητας, δεδομένου ότι η ακολουθία του πεπτιδίου που έχει επιλεγεί προέρχεται από την ανθρώπινη HER-2/neu. Η μετατροπή της ανοσοαπόκρισης Th2 τύπου, εναντίον διαλυτών αντιγόνων που εκφράζονται σε καρκινικούς όγκους, σε Τh1 τύπο ανοσοαπόκρισης είναι σημαντική στην ανοσοθεραπεία του καρκίνου. Η δημιουργία αντιγονο-ειδικών CD8+ κυτταροτοξικών λεμφοκυττάρων, σε συνέργεια με τα αντίστοιχα βοηθητικά Τ (CD4+) λεμφοκύτταρα, πιστεύεται ότι θα οδηγήσουν στην απόρριψη του όγκου ή στην επιβράδυνση της ανάπτυξης αυτού.
Η ταυτοποίηση του τύπου της ανοσοαπόκρισης έγινε με την ανάπτυξη ανοσοαναλυτικών τεχνικών για την μέτρηση των ολικών ειδικών ανοσοσφαιρινών IgG, των ισοτύπων αυτών (IgG1 και IgG2a). Επίσης προσδιορίσθηκε ο τύπος της ανοσοαπόκρισης σε κυτταρικό επίπεδο με την ανάπτυξη τεχνικών μέτρησης της ικανότητας του πολλαπλασιασμού των λεμφοκυττάρων και με μέτρηση των κυτοκινών, κυρίως σε υπερκείμενα καλλιεργειών λεμφοκυττάρων, αλλά και στο αίμα.
Για την χορήγηση χρησιμοποιήθηκαν μικροσφαίρες PLA και PLGA με φορτωμένο το αντιγόνο με δύο διαφορετικούς τρόπους (προσροφημένο ή απλά αναμεμιγμένο).
Η in vivo χορήγηση του πεπτιδικού αντιγόνου που απλά και μόνο αναμίχθηκε με PLA μικροσφαίρες προκάλεσε μια ισχυρή ανοσολογική απόκριση που ήταν συγκρίσιμη με αυτήν που προκλήθηκε από το συνδυασμό του αντιγόνου με πλήρες ανοσοενισχυτικό του Freund (CFA). Επιπλέον, μετά από ανάλυση του προφίλ των κυτοκινών που εκκρίνονται από τα Τ λεμφοκύτταρα των ανοσοποιημένων μυών, αποδείχθηκε ότι ο συνδυασμός του αντιγόνου πεπτιδίων με τις PLA μικροσφαίρες προκάλεσε μια ισχυρή Th1 ανοσολογική απόκριση στο αντιγόνο. Ο χρόνος της επώασης πεπτιδίων με τις μικροσφαίρες πριν από τη χορήγηση δεν είχε επιπτώσεις στην ανοσολογική απόκριση, γεγονός που απλοποιεί περαιτέρω την παραγωγή σε ευρεία κλίμακα αυτού του τύπου εμβολίων. Τα αποτελέσματα που ελήφθησαν από αυτή τη μελέτη δικαιολογούν την περαιτέρω διερεύνηση σε in vivo πειραματικά μοντέλα καρκίνου της δυνατότητας επαγωγής ισχυρής κυτταρικής ανοσοαπόκρισης έναντι των καρκινικών κυττάρων που υπερεκφράζουν την HER-2/neu πρωτεΐνη με απλή ανάμιξη κατάλληλων πεπτιδικών αντιγόνων της HER-2/neu με PLA μικροσφαίρες. / Despite the progress of classic therapeutic strategies developed concerning cancer the greatest number of patients deteriorates and eventually dies. The need to confront this disease in an alternative way has led to the development of new immunotherapeutic methods. The novel idea of cancer immunotherapy was born in the 19th century when William Coley used live live species of bacteria Streptococcus erysipelas in order to induce an overall immune response targeted in part against sarcoma tumors. Occasional positive immune responses that were observed were possibly due to the enhancement of the immune response from the inflammatory reactions caused by the bacteria. In order to induce a special immune response against tumors it is necessary for some specific antigens to be identified at cancer cells. So the first step in the effort to induce immunotherapy is the isolation of antigens expressed by cancer cells that are preferably not expressed at healthy tissues, to prevent autoimmune response.
The identification of tumor-specific antigens that are identified by T cells gave a great boost to the development of T-cell-mediated specific immune response, both in research for tumor immunology as in its clinical appliance. That led to the beginning of peptide use in vaccines in cancer immunotherapy. From the plethora of already known cancer antigens, epitopes have been identified as capable of forming complex with MHC (Major Histocompatibility Complex) class I molecules, which consequently induce the activation of CD8+ T cells, given that most tumors are positive for the MHC class I molecules, but negative to MHC class II molecules. Moreover, CD8+ T cells can kill cancer cells directly, through identification of the MHC class I–peptide complex that is expressed on the tumor surface.
Recently many epitopes that are recognized by MHC class II molecules have been identified, since it is well known that the CD4+ T cells play an important role in the initiation, organization and maintenance of the immune response. Recent clinical studies and preclinical models have shown that immunization with epitopes that are eminent to form a complex with MHC class II molecules, which comprise amino acid sequences that can connect with MHC class I molecules, are effective in the simultaneous induction of helper and cytotoxic long life T-cell in vivo.
Among all known cancer antigens, the HER-2/neu protein demonstrates the advantage of being overexpressed in various types of cancer, while patients whose tumors overexpress the protein exhibit preexisting immunity against its peptides. HER-2/neu is a transmembrane protein that is overexpressed in cancer cells and therefore the perfect target for immunotherapy concerning both cellular and humoral immunity. Clinical studies using
HER-2/neu peptides have shown induction of immune response in the majority of patients. However, metastatic tumors overexpressing HER-2/neu protein still remain incurable. As a result, there is ample need for respective new therapeutic strategies and at this point more potent immunogenic sequences of the protein are under investigation, as is the response of patients to those sequences, in hope of creating more specific anticancer therapies.
Encapsulation of antigen into poly (lactic-co-glycolic) acid (PLGA) microspheres has proven to induce potent and long lasting immune response. Up to date, there is no study analyzing the influence of PLGA polymer characteristics or the immunization scheme, regarding the type of the immune response following the administration of PLGA antigen microspheres in vivo.
In the current study, the type of the immune response after in vivo administration of HER-2/neu peptide adsorbed on poly-lactic acid (PLA) and PLGA microspheres is investigated. The model antigens used were the following two:
• GSPYVSRLLGICLTSTVQLVQL peptide corresponds to the 779-799 amino acid sequence of the HER-2/neu protein. This amino acid sequence contains the cytotoxic epitope CLTSTVQLV (789-797) in combination with the Th epitope GSPYVSRLLGICL (778-790) of the HER-2/neu protein.
• CLTSTVQLV (789-797) peptide, which corresponds to merely the cytotoxic epitope.
HHD transgenic mice expressing human HLA-A2.1 histocompatibility molecules were used as subjects, given the fact that the amino acid sequence chosen has derived from the human HER-2/neu protein. Converting the preexisting Th2 type of immune response, against soluble antigens expressed in tumors, to the Th1 type is extremely important in curing cancer. The production of antigen-specific CD8+ cytotoxic lymphocytes with the relevant helper T (CD4+) lymphocytes is believed to trigger the rejection of the tumor or the delay of its development.
The type of the immune response was identified with immuno-analytic techniques developed for measuring the total amount of IgG immunoglobulins, and their isotypes (IgG1 and IgG2a). Moreover the type of the immune response has been determined at cellular level using proliferation assay and cytokine measurement assay, usually at cell culture supernatants but also in blood samples.
For the peptide administration, PLA and PLGA microspheres were used. The antigen was administered in two different ways, either absorbed or adsorbed (just mixed).
The in vivo administration of the peptide antigen just admixed with PLA microspheres induced potent immune response, comparable to that caused by the antigen administration using complete Freund’s adjuvant (CFA). Moreover, upon the analysis of the cytokine profile secreted from T lymphocytes of immunized mice, the PLA admixed peptide proved to induce a specific and potent Th1 immune response. The incubation time of the peptide with PLA microspheres had no implications to the immune response, therefore further simplifying future mass production of such vaccine types. The results extracted by this study justify further investigation of the in vivo experimental cancer models for inducing potent cellular immune response against cancer cells that overexpress the HER-2/neu protein by simply mixing the appropriate HER-2/neu peptide antigens with PLA microspheres.
|
237 |
Technické aspekty použití 3D tisku ve výuce na ZŠ / Technical aspects of the use of 3D printing in the education at elementary schoolCVRČEK, Tomáš January 2016 (has links)
This thesis in the beginning deals with the history of 3D printing and its development. For better understanding the nature of 3D printing are the significant technologies that includes. Professional part includes work with the printer MakerBot Replicator 2X. Mechanical parts of the device are analyzed together with the operating software MakerBot DesktopThe following chapter is dealing with the limits and restrictions when it is printed on said 3D printer, except that describes important aspects when working on the printer. For the creation of electronic models are suggested appropriate programs for use in elementary school. A significant milestone is forming the problems of 3D printing, which can serve as a guide for the elimination of print quality problems, malfunctioning of 3D printers and others. Interesting models are designed for teaching physics and working activities that the students facilitate understanding of the substance of the response and act as activating element within lesson. It was created a list of important sites where you can find models suitable not only for teaching in elementary schools, but also for other purposes. The last chapter deals with the economic aspect of 3D printing.
|
238 |
Desenvolvimento e avaliação de nanocompósitos à base de polietileno de alta densidade (hdpe-vERDE)/poli(ácido lático) (pla) e nanocarbonato de cálcio para fabricação de embalagens / Production of nanocomposites based on PLA / HDPE-g-MA / HDPE-green/ n-CaCO3 for application in the packaging sectorAmanda Gerhardt de Oliveira 24 March 2015 (has links)
Este trabalho traz como proposta a obtenção de nanocompósitos (PLA/HDPE-g-AM/HDPE-Verde/n-CaCO3) com propriedades mecânicas e de fluxo adequadas para aplicação no setor de embalagens. A produção desses nanocompósitos ocorreu por meio de uma mistura de PLA e polietileno proveniente de fonte renovável (HDPE-Verde), viabilizada pela ação do agente compatibilizante polietileno enxertado com anidrido maleico (HDPE-g-AM) e do aditivo carbonato de cálcio nanoparticulado (n-CaCO3), através do estudo das condições ótimas de processamento e composição, realizado por meio do Planejamento Fatorial Delineamento Composto Central Rotacional (DCCR). A obtenção deste balanço ótimo se deu ao se avaliar a influência dos fatores de estudo velocidade de rotação (100-400rpm), teor da fase dispersa PLA 2003D (0-35%) e teor da nanocarga mineral - n-CaCO3 (1-4%) sobre as propriedades mecânicas, térmicas, morfológicas e de fluxo dos nanocompósitos, através das variáveis de resposta - módulo de Young, resistência ao impacto, grau de cristalinidade (c) e índice de fluidez (MFI).Avaliações preliminares conduziram à escolha do PLA como fase dispersa dos compósitos. As variáveis de resposta do planejamento indicaram que a viscosidade dessas amostras é diretamente proporcional à concentração de n-CaCO3 e a velocidade de processamento, por promoverem, respectivamente, maior resistência ao escoamento e dispersão da carga. As composições apresentaram como característica resistência ao impacto similar ao comportamento do PLA puro e em contrapartida, módulo de Young similar a matriz de HDPE-Verde. A cristalinidade dos polímeros foi melhorada, observando-se uma ação mútua do HDPE-Verde e do PLA para este aumento, havendo ainda colaboração do n-CaCO3 e da velocidade de mistura. A morfologia dos compósitos foi função da velocidade que favoreceu maior dispersão e distribuição da fase dispersa e ainda por maiores teores de n-CaCO3 que ocasionaram a formação de gotas de PLA de menores dimensões, favorecendo uma estrutura mais homogênea. Maiores teores de PLA alteraram a morfologia dos compósitos, ocasionando a formação de grandes domínios dessa fase na forma de gota que atribuíram ao material maior rigidez. A avaliação individual do efeito do n-CaCO3 sobre o PLA e o HDPE-Verde individualmente apontaram que a ação da carga mineral em geral é benéfica para a melhoria das propriedades, com exceção da resistência ao impacto. Além disso, os resultados mostram que a compatibilizante HDPE-g-AM também minimiza a atuação da carga. Em relação à influência do HDPE-g-AM sobre a mistura HDPE-Verde/PLA é possível observar que a compatibilização da mistura tende a ocorrer, porém não de forma eficiente como o esperado
|
239 |
Desenvolvimento e avaliação de nanocompósitos à base de polietileno de alta densidade (hdpe-vERDE)/poli(ácido lático) (pla) e nanocarbonato de cálcio para fabricação de embalagens / Production of nanocomposites based on PLA / HDPE-g-MA / HDPE-green/ n-CaCO3 for application in the packaging sectorAmanda Gerhardt de Oliveira 24 March 2015 (has links)
Este trabalho traz como proposta a obtenção de nanocompósitos (PLA/HDPE-g-AM/HDPE-Verde/n-CaCO3) com propriedades mecânicas e de fluxo adequadas para aplicação no setor de embalagens. A produção desses nanocompósitos ocorreu por meio de uma mistura de PLA e polietileno proveniente de fonte renovável (HDPE-Verde), viabilizada pela ação do agente compatibilizante polietileno enxertado com anidrido maleico (HDPE-g-AM) e do aditivo carbonato de cálcio nanoparticulado (n-CaCO3), através do estudo das condições ótimas de processamento e composição, realizado por meio do Planejamento Fatorial Delineamento Composto Central Rotacional (DCCR). A obtenção deste balanço ótimo se deu ao se avaliar a influência dos fatores de estudo velocidade de rotação (100-400rpm), teor da fase dispersa PLA 2003D (0-35%) e teor da nanocarga mineral - n-CaCO3 (1-4%) sobre as propriedades mecânicas, térmicas, morfológicas e de fluxo dos nanocompósitos, através das variáveis de resposta - módulo de Young, resistência ao impacto, grau de cristalinidade (c) e índice de fluidez (MFI).Avaliações preliminares conduziram à escolha do PLA como fase dispersa dos compósitos. As variáveis de resposta do planejamento indicaram que a viscosidade dessas amostras é diretamente proporcional à concentração de n-CaCO3 e a velocidade de processamento, por promoverem, respectivamente, maior resistência ao escoamento e dispersão da carga. As composições apresentaram como característica resistência ao impacto similar ao comportamento do PLA puro e em contrapartida, módulo de Young similar a matriz de HDPE-Verde. A cristalinidade dos polímeros foi melhorada, observando-se uma ação mútua do HDPE-Verde e do PLA para este aumento, havendo ainda colaboração do n-CaCO3 e da velocidade de mistura. A morfologia dos compósitos foi função da velocidade que favoreceu maior dispersão e distribuição da fase dispersa e ainda por maiores teores de n-CaCO3 que ocasionaram a formação de gotas de PLA de menores dimensões, favorecendo uma estrutura mais homogênea. Maiores teores de PLA alteraram a morfologia dos compósitos, ocasionando a formação de grandes domínios dessa fase na forma de gota que atribuíram ao material maior rigidez. A avaliação individual do efeito do n-CaCO3 sobre o PLA e o HDPE-Verde individualmente apontaram que a ação da carga mineral em geral é benéfica para a melhoria das propriedades, com exceção da resistência ao impacto. Além disso, os resultados mostram que a compatibilizante HDPE-g-AM também minimiza a atuação da carga. Em relação à influência do HDPE-g-AM sobre a mistura HDPE-Verde/PLA é possível observar que a compatibilização da mistura tende a ocorrer, porém não de forma eficiente como o esperado
|
240 |
Efeitos do extensor de cadeia na morfologia, propriedades reológicas e mecânicas de filme tubular de blendas de poli(ácido) láctico) PLA com poli(butileno-adipato-co-tereftlalato) PBATArruda, Liliane Cardoso 27 March 2015 (has links)
This study investigated the effect of chain extender epoxy based additive, Joncryl ADR 4368, on the rheological, thermal and mechanical properties of poly(lactic acid) with poly(butylene adipate-co-terephthalate) (PLA/PBAT) blends in the blown films form. Compositions with 40% and 60% by weight PLA were selected for production of such blown films. These dispersed phase content was chosen because the literature does not present mechanical behavior studies of tubular film blends with high concentration of the dispersed phase. Rheological analysis in dynamic oscillatory regime showed the reaction of epoxy group with end chain in both polymers, and a higher reactivity of the chain extender with PLA. The films produced exhibited different morphologies according to the blend composition and chain extender content. Films containing 40% PLA presented the dispersed phase morphology in a fibrillar form; however in the presence of chain extender, the dispersed phase is presented as ellipsoids. This change in morphology resulted in a reduction in the mechanical properties of these films in tensile tests. Films containing 60% PLA had a coarse morphology with dispersed phase in the ribbons-like form. The addition of extender yielded a refinement of the dispersed phase morphology from ribbon to elongated fibril form, which is responsible for the mechanical properties improvement of these films. Despite the low adhesion between matrix and dispersed phase, the proper setting of the morphology of the blends as a function of additive content, allowed to produce films with mechanical properties quite different from each other. / Neste trabalho foi estudado o efeito do aditivo extensor de cadeia à base de epóxi, Joncryl ADR 4368, nas propriedades reológicas, térmicas e mecânicas de filmes tubulares de blendas de poli(ácido láctico) com poli(butileno adipato-co-tereftalato) (PLA/PBAT). Composições com 40% e 60% em peso de PLA foram selecionadas para produção destes filmes tubulares. Estes teores de fase dispersa foram escolhidos pelo fato da literatura não apresentar estudos de comportamento mecânico de filmes tubulares de blendas com alta concentração da fase dispersa. Análises reológicas em regime dinâmico oscilatório evidenciaram a reação do grupo epóxi com finais de cadeia de ambos os polímeros, e evidenciaram uma maior reatividade do extensor com o PLA. Os filmes produzidos apresentaram diferentes morfologias de acordo com a composição da blenda e o teor de extensor de cadeia adicionado. Filmes contendo 40% de PLA apresentaram uma morfologia da fase dispersa na forma fibrilar; já na presença do extensor, a fase dispersa se apresentou na forma de elipsóides. Esta mudança na morfologia acarretou em uma redução nas propriedades mecânicas destes filmes em ensaios de tração. Filmes contendo 60% de PLA apresentaram uma morfologia grosseira com a fase dispersa na forma de fitas. A adição do extensor proporcionou um refinamento na morfologia da fase dispersa com formação de fibrilas alongadas, responsável pelo ganho nas propriedades mecânicas destes filmes. Apesar da baixa adesão entre matriz e fase dispersa, o ajuste apropriado da morfologia das blendas, em função do teor de aditivo, possibilitou produzir filmes com propriedades mecânicas bastante diferenciadas entre si.
|
Page generated in 0.0176 seconds