Global ETD Search

271	MINIMALLY INVASIVE OPTICAL SENSING OF GOLD AND SILVER NANOPARTICLE AGGREGATION:A PRELIMINARY INVESTIGATION Beamer, Diane Krupp 19 August 2013 (has links) No description available. Biophysics Nanoscience Nanotechnology Optics Physics Nanoparticle diameter optical sensor colloidal Au aggregation surface plasmon resonance biosensing portable total internal reflection bioconjugates nanotechnology refractive index turbidity Fresnel Mie evanescent dielectric attenuation
272	Compact and Energy-Efficient Forward-Biased PN Silicon Mach-Zehnder Modulator Dev, Sourav, Singh, Karanveer, Hosseini, Reza, Misra, Arijit, Catuneanu, Mircea, Preußler, Stefan, Schneider, Thomas, Jamshidi, Kambiz 11 June 2024 (has links) A compact device model along with simulations and an experimental analysis of a forward-biasedPNjunction-based silicon Mach-Zehndermodulator (MZM) with a phase-shifter length of 0.5 mm is presented. By placing the PN junction to a certain off-center such that72%of thewaveguide is p-doped, the refractive index swing at a given drive voltage swing is increased by 2% compared to the symmetric layout. The effects of the phase shifters’ length mismatch and asymmetric splitting on the modulation efficiency and extinction ratio of the modulator are simulated and compared with experimental results.Without any pre-emphasis or post-processing, a high-speed operation up to 15 Gb/s using a nonreturn-to-zero modulation format is demonstrated. A modulation efficiency (V πL) as low as 0.07 V × cm is verified and power consumption of 0.88 mW/Gb/s is recorded while a high extinction ratio of 33 dB is experimentally demonstrated. Compared to previously reported forward-biased silicon integrated modulators, without active tuning of the power splitting ratio between the arms, the extinction ratio is 10 dB higher. This MZM along with its compact structure is also sufficiently energy-efficient due to its low power consumption. Thus, it can be suitable for applications like analog signal processing and high-order amplitude modulation transmissions. info:eu-repo/classification/ddc/620 ddc:620
273	Untersuchung photorefraktiver Materialien mittels optischer Ptychographie / Investigation of photorefractive materials using optical ptychography Bernert, Constantin 05 January 2017 (has links) (PDF) In der vorliegenden Arbeit wird die neuartige Mikroskopiemethode der Ptychographie für die Untersuchung photorefraktiver Materialien genutzt. Photorefraktive Materialien zeichnen sich durch die Generation lichtinduzierter Brechungsindexänderungen aus. Die Ptychographie bietet die Möglichkeit, neben der generierten Brechungsindexänderung im photorefraktiven Material auch die für die Generation genutzte Intensitätsverteilung des Laserstrahls zu bestimmen. Es wird sowohl die Abhängigkeit der Brechungsindexänderung von der Zeit der Generation als auch die Abhängigkeit von der Polarisation des Lasers gemessen. Durch den Vergleich der gewonnenen Werte mit einer numerischen Simulation des photorefraktiven Effekts werden mikroskopische Parameter der lichtinduzierten Ladungswanderung ermittelt. Zudem wird aus der polarisationsabhängigen ptychographischen Messung das Raumladungsfeld und die korrespondierende Ladungsdichte im Material berechnet. Die Ptychographie liefert damit einen neuen Zugang zum quantitativen Verständnis der Photorefraktivität. / In the present thesis the novel microscopy technique of ptychography is applied to the investigation of photorefractive materials. Photorefractive materials exhibit a change of the refractive index due to the exposure to light. The method of ptychography determines the refractive index change of the material together with the intensity distribution of the laser beam that was used for its generation. In one part of the experiment the time dependence of the refractive index change versus the generation time is investigated, in the other part of the experiment the dependence of the refractive index change to the polarisation of the laser beam is examined. Microscopic parameters of the photorefractive charge migration are determined with the utilisation of a numerical simulation of the photorefractive effect and its comparison with the measurement. Finally, the whole space charge field with the corresponding space charge density is calculated from a set of ptychographic measurements of one refractive index change with different polarisation directions of the laser. The presented experiments and their evaluation show, that the method of ptychography opens a new possibility for a quantitative understanding of the photorefractive effect. Photorefraktivität photorefraktiv Photorefraktiver Effekt photorefraktives photorefraktiver photorefraktive lichtinduziert lichtinduzierte lichtinduzierter lichtinduziertes Lithiumniobat LiNbO3 LiNbO3:Fe linbo3 linbo3:fe Ladungstransport Brechungsindexänderung Brechungsindexänderungen Raumladungsfeld elektrooptischer Effekt Pockels Effekt photovoltaischer Effekt photovoltaische Stromdichte photovoltaische photovoltaischer Photovoltaik photovoltaissches Ptychographie ptychographisch ptychographische ptychographisches Interferometrie interferometrisch interferometrische interferometrische Untersuchung interferometrisches Holographie holographisches holographische holographische Untersuchung digitale Holographie photorefractive effect photorefractive photo refractive light-induced lightinduced light induced Lithium niobate Lithiumniobate LiNbO3 LiNbO3:Fe linbo3 linbo3:fe charge transport chargetransport refractive index change refractive index changes space charge field electrooptic effect electrooptic Pockels effect photovoltaic effect photovoltaic current photovoltaic ptychography ptychographic interferometry interferometric holography holographic digital holography ddc:530 rvk:VG 8600 Photorefraktivität Photorefraktiver Effekt Lithiumniobat Ladungstransport Brechungsindexänderung elektrooptischer Effekt Pockels Effekt photovoltaischer Effekt photovoltaische Stromdichte Photovoltaik Ptychographie Interferometrie Holographie digitale Holographie Photorefractive Effect Lithium niobate charge transport charge migration refractive index change electrooptic effect Pockels effect photovoltaic effect photovoltaic current ptychography interferometry holography digital holography
274	Untersuchung photorefraktiver Materialien mittels optischer Ptychographie Bernert, Constantin 04 October 2016 (has links) In der vorliegenden Arbeit wird die neuartige Mikroskopiemethode der Ptychographie für die Untersuchung photorefraktiver Materialien genutzt. Photorefraktive Materialien zeichnen sich durch die Generation lichtinduzierter Brechungsindexänderungen aus. Die Ptychographie bietet die Möglichkeit, neben der generierten Brechungsindexänderung im photorefraktiven Material auch die für die Generation genutzte Intensitätsverteilung des Laserstrahls zu bestimmen. Es wird sowohl die Abhängigkeit der Brechungsindexänderung von der Zeit der Generation als auch die Abhängigkeit von der Polarisation des Lasers gemessen. Durch den Vergleich der gewonnenen Werte mit einer numerischen Simulation des photorefraktiven Effekts werden mikroskopische Parameter der lichtinduzierten Ladungswanderung ermittelt. Zudem wird aus der polarisationsabhängigen ptychographischen Messung das Raumladungsfeld und die korrespondierende Ladungsdichte im Material berechnet. Die Ptychographie liefert damit einen neuen Zugang zum quantitativen Verständnis der Photorefraktivität.:1 Einleitung 2 Theoretische Vorbetrachtungen 2.1 Ptychographie 2.1.1 Messung 2.1.2 Modell und Rekonstruktion 2.1.3 Ortsauflösung 2.2 Photorefraktiver Efekt 2.2.1 Lithiumniobat - Musterbeispiel für die Photorefraktivität 2.2.2 Ein-Zentrum-Modell 2.2.3 Brechungsindexänderung 2.2.4 Hohe Intensitäten 2.3 Raumladungsfeld 2.3.1 Ableitung des Feldes aus den Messgrößen 2.3.2 Raumladungsverteilung 2.3.3 Oberflächendeformation 2.3.4 Dynamik der Ladungen und des Feldes 3 Messungen 3.1 Proben 3.1.1 Ptychographische Teststruktur 3.1.2 LiNbO3:Fe 3.2 Versuchsanordnung 3.2.1 Experimenteller Aufbau 3.2.2 Grenze der Ortsauflösung 3.2.3 Charakterisierung des Laserstrahls 3.2.4 Experimentelle Überprüfung der Näherungen 3.3 Dynamik der Brechungsindexänderung 3.4 Polarisationsabhängigkeit der Brechungsindexänderung 4 Auswertung 4.1 Dynamik des Raumladungsfeldes und der Ladungen 4.1.1 Simulation 4.1.2 Vergleich zwischen Messung und Simulation 4.1.3 Dynamik der Ladungsverteilung 4.1.4 Fazit 4.2 Berechnung des Raumladungsfeldes 4.2.1 Raumladungsfeld und Ladungsverteilung 4.2.2 Simulation 4.2.3 Asymmetrie der Ladungsverteilung 4.2.4 Fazit 5 Zusammenfassung Appendizes A Physikalische Konstanten B Tensoren für LiNbO3 C Ungenäherte Herleitung der Brechungsindexänderung D Implementierung eines iterativen Verfahrens zur Bestimmung der Dynamik des Ein-Zentrum-Modells E Quelltext der Implementierung des iterativen Verfahrens Literaturverzeichnis / In the present thesis the novel microscopy technique of ptychography is applied to the investigation of photorefractive materials. Photorefractive materials exhibit a change of the refractive index due to the exposure to light. The method of ptychography determines the refractive index change of the material together with the intensity distribution of the laser beam that was used for its generation. In one part of the experiment the time dependence of the refractive index change versus the generation time is investigated, in the other part of the experiment the dependence of the refractive index change to the polarisation of the laser beam is examined. Microscopic parameters of the photorefractive charge migration are determined with the utilisation of a numerical simulation of the photorefractive effect and its comparison with the measurement. Finally, the whole space charge field with the corresponding space charge density is calculated from a set of ptychographic measurements of one refractive index change with different polarisation directions of the laser. The presented experiments and their evaluation show, that the method of ptychography opens a new possibility for a quantitative understanding of the photorefractive effect.:1 Einleitung 2 Theoretische Vorbetrachtungen 2.1 Ptychographie 2.1.1 Messung 2.1.2 Modell und Rekonstruktion 2.1.3 Ortsauflösung 2.2 Photorefraktiver Efekt 2.2.1 Lithiumniobat - Musterbeispiel für die Photorefraktivität 2.2.2 Ein-Zentrum-Modell 2.2.3 Brechungsindexänderung 2.2.4 Hohe Intensitäten 2.3 Raumladungsfeld 2.3.1 Ableitung des Feldes aus den Messgrößen 2.3.2 Raumladungsverteilung 2.3.3 Oberflächendeformation 2.3.4 Dynamik der Ladungen und des Feldes 3 Messungen 3.1 Proben 3.1.1 Ptychographische Teststruktur 3.1.2 LiNbO3:Fe 3.2 Versuchsanordnung 3.2.1 Experimenteller Aufbau 3.2.2 Grenze der Ortsauflösung 3.2.3 Charakterisierung des Laserstrahls 3.2.4 Experimentelle Überprüfung der Näherungen 3.3 Dynamik der Brechungsindexänderung 3.4 Polarisationsabhängigkeit der Brechungsindexänderung 4 Auswertung 4.1 Dynamik des Raumladungsfeldes und der Ladungen 4.1.1 Simulation 4.1.2 Vergleich zwischen Messung und Simulation 4.1.3 Dynamik der Ladungsverteilung 4.1.4 Fazit 4.2 Berechnung des Raumladungsfeldes 4.2.1 Raumladungsfeld und Ladungsverteilung 4.2.2 Simulation 4.2.3 Asymmetrie der Ladungsverteilung 4.2.4 Fazit 5 Zusammenfassung Appendizes A Physikalische Konstanten B Tensoren für LiNbO3 C Ungenäherte Herleitung der Brechungsindexänderung D Implementierung eines iterativen Verfahrens zur Bestimmung der Dynamik des Ein-Zentrum-Modells E Quelltext der Implementierung des iterativen Verfahrens Literaturverzeichnis info:eu-repo/classification/ddc/530 ddc:530
275	Application des techniques d’optique guidée à la détection de gaz Wood, Thomas 27 March 2013 (has links) Dans un monde de plus en plus pollué par l'activité industrielle, la détection des espèces gazeuses nocives dans l'atmosphère est d'une importance essentielle. Le marché des capteurs de gaz est déjà bien développé, avec la présence de diverses technologies et principes de détection, chacune présentant des avantages et des inconvénients intrinsèques. Dans le cadre de cette thèse, un alliage entre deux ou plusieurs technologies de détection typiquement utilisées de façon autonome a été visée, afin d'améliorer les performances globales des systèmes capteurs ainsi formées. A ce fin, nous avons conçu et étudié des dispositifs capteurs basées sur la transduction optique, couplée à un matériau sensible au gaz cible à détecter. Plus précisément, nous avons intégré pour la première fois un matériau catalyseur pouvant accélérer le taux d'oxydation des espèces chimiques (tel le monoxyde de carbone ou l'hydrogène) avec une architecture optique capable d'absorber la chaleur cédée lors de cette oxydation. L'augmentation de température occasionnée est traduite en une variation d'intensité lumineuse constituante le signal de sortie du capteur. Les travaux effectués sur les mesures de la dispersion thermique et chromatique de l'indice de réfraction des matériaux constituant le transducteur optique par des techniques d'optique guidé, ellipsométrie et des techniques photométriques sont présentés. Le sondage par moyen optique des propriétés électriques des matériaux semiconducteurs a également été étudié, y compris les variations de ces propriétés en présence des gaz oxydants, réducteurs et combustibles. / In a world suffering from increasing air pollution due to spiraling industrial activity, the detection of toxic gasses in the atmosphere is of paramount importance. The gas detector market is already well developed, and features a wide variety of detection technologies and techniques, each presenting its own set of intrinsic advantages and drawbacks. In this thesis, a combination of two or more technologies typically used independently has been studied in order to improve the global performances of gas detection systems. To this length, we have conceived and studied detector architectures based upon optical transduction systems, coupled with a material presenting a specific sensitivity to the target gas. More precisely, we have for the first time integrated a catalyst designed to accelerate the oxidation rate of chemical species (such as carbon monoxide or hydrogen) with an optical component capable of absorbing the heat generated by the oxidation reaction. The associated increase in temperature is translated to a variation of the optical intensity comprising the exit signal of the detector. The work carried out measuring the chromatic and temperature dispersion of the refractive index of the materials comprising the optical transduction component by guided mode techniques, ellipsometry and photometric techniques is presented. The optical probing of the electrical properties of semiconductor materials has also been studied, including the variations of these properties following interactions with oxidizing, reducing, or combustible gasses. M-lines Modes guidés Dispersion chromatique Dispersion thermique Coefficient thermo-optique Indice de réfraction Ellipsométrie Couches minces Capteur de gaz Transduction optique Semiconducteur M-lines Guided modes Chromatic dispersion Thermal dispersion Thermo-optic coefficient Refractive index Ellipsometry Thin films Gas sensor Optical transduction Semiconductor
276	Etude théorique et expérimentale des relations architecture – propriétés optiques de films minces d'oxyde de tungstène pulvérisés par GAD / Theoretical and experimental investigations of correlations between architecture-optical properties of GLAD tungsten oxide thin films sputter deposited Charles, Cédric 07 February 2013 (has links) Cette thèse participe à l'étude générale et à la compréhension des relations structure- propriétés optiques de couches minces d'oxyde de tungstène, nanostructurées lors de leur dépôt par la technique Glancing Angle Déposition. Cette technique repose sur le contrôle de l'orientation relative du substrat vis à vis de la source de vapeur.[...] / This thesis contributes to the general study and understanding of the relationship between structure and optical properties of nanostructured tungsten oxide by Glancing Angle Déposition technique. this technique relies on the control of the relative orientation of the substrate to the vapor source.[...] Films minces d'oxyde de tungstène (VO3) Finite-difference time domaine Finite-difference time domaine Propriétés optiques Indice de réfraction Biréfringence Chiralité Spires Polygonales Transmission sélective Tungsten oxide (VO3) thin films Glancing angle deposition Finite-difference time domaine Optical properties Refractive index Birrefringence Chirality Polygonal helix Selectiv transmission 600
277	Estudos das propriedades estruturais e ópticas de vidros teluritos / Studies of the structural and optical properties of the tellurite glasses Giehl, Júlia Maria 25 February 2011 (has links) Vidros teluritos são considerados fortes candidatos para aplicações em lasers e óptica não linear devido a importantes características, como o elevado índice de refração, baixa energia de fônons, baixa temperatura de transição vítrea e sua fácil preparação. Neste trabalho foram produzidas amostras dos sistemas vítreos TeO2- ZnO-Na2O, TeO2-Nb2O5-Na2O e Te2O-Na2O incluindo ou não dopagens de AgNO3 para estudos estruturais e ópticos. As propriedades estruturais e os mecanismos de recombinação destes vidros foram estudados por meio das técnicas de ressonância paramagnética eletrônica, termoluminescência e correntes de despolarização termicamente estimuladas. Já as propriedades ópticas como o coeficiente de absorção linear, índice de refração linear e não linear foram estudadas por meio das técnicas de absorção óptica, acoplamento de prismas e varredura Z. Foram ainda desenvolvidos estudos da precipitação de nanopartículas de prata para o sistema TeO2-ZnO-Na2O com dopagens de AgNO3 com diferentes temperaturas de tratamento térmico. A caracterização das nanopartículas metálicas foi realizada por meio da técnica de absorção óptica auxiliada por microscopia eletrônica de transmissão e espectrometria de energia dispersiva. Foram observadas por ressonância paramagnética eletrônica quatro respostas paramagnéticas dos vidros irradiados com raio , sendo uma de natureza desconhecida e as outras três identificadas como g¹, g² e g³ atribuídas respectivamente ao centro de buraco do telúrio e do oxigênio, centro de buraco do oxigênio terminal e centro de elétron do telúrio. Foi proposto ainda um modelo para explicar os mecanismos de formação destes centros. A partir dos resultados de termoluminescência observou-se que os processos de recombinação destes centros de defeitos são não radioativos. Neste projeto foram estudados pela primeira vez na literatura os fenômenos de polarização e despolarização em vidros teluritos, com e sem irradiação gama, por meio da técnica de correntes de despolarização termicamente estimuladas. Quanto às propriedades ópticas, foi investigada a influência da adição de prata dos sistemas vítreos TeO2-ZnO-Na2O e TeO2-Nb2O5-Na2O em relação à energia do gap, a cauda de Urbach, índice de refração linear e não linear.Nos resultados de varredura Z do sistema vítreo TeO2-Nb2O5-Na2O foi observado o aumento da assimetria na curva com aumento da adição de AgNO3 Este fenômeno foi explicado por meio de uma adaptação do modelo de Sumi para processos não radiativos, responsáveis pelo aumento do caráter térmico do índice de refração não linear. Por fim um modelo foi criado para explicar a precipitação de nanopartículas de prata na matriz vítrea TeO2-ZnO-Na2O mediante tratamento térmico. / Tellurite glasses are considered powerful candidates for applications in lasers and nonlinear optics due to their important properties such as high refractive index, low phonon energy, relatively low glass transition temperature and easy glass production at room atmosphere. In this work glass samples of the systems ZnO-Na2O, TeO2-Nb2O5-Na2O and Te2O-Na2O were produced, including or not the AgNO3 doping for the structural and optical study purposes. The structural properties and the recombination mechanisms of these glasses were studied by means of the techniques of electron paramagnetic resonance, thermoluminescence and thermally stimulated depolarization currents. The optical properties such as the optical linear absorption coefficient, linear and nonlinear refractive index were studied by means of the optical absorption techniques, prism coupling and Z-scan. Further studies were developed on the precipitation of silver nanoparticles embedded in the glass system TeO2-ZnO-Na2O doped with AgNO3, by means of thermal treatments at different temperatures. The characterization of the metallic nanoparticles was carried out by optical absorption aided by transmission electron microscopy and dispersive energy spectroscopy. Four paramagnetic responses were observed by electron paramagnetic resonance of the -irradiated glasses, one not yet identified and the other three identified as g0, g1 and g3 attributed respectively to the tellurium-oxygen hole center, non-bridging oxygen hole center and tellurium electron center. A model to explain the formation mechanisms of these centers was proposed. The thermoluminescence results indicated that the recombination processes of these centers are non-radiative. This is the first study that deals with polarization and depolarization phenomena in tellurite glasses with and without gamma irradiation, by the technique of thermally stimulated depolarization currents. In what regards the optical properties of the glass systems TeO2-ZnONa2O and TeO2-Nb2O5-Na2O, the effect of the silver doping on the gap energy, Urbach tail, linear and nonlinear refractive indices were investigated. Through the Z-scan technique results of the glass system TeO2-Nb2O5-Na2O, an increasing asymmetry of the curve, with increasing AgNO3 content was observed. This phenomenon was explained through an adaptation of Sumi´s model for non-radiative processes, applied to a silver doped insulating glass, to explain the thermal character of the nonlinear refractive index. Finally, a model was developed to explain the silver nanoparticles precipitation in the TeO2-ZnO-Na2O glass matrix submitted to thermal treatment. Absorção óptica Centros de defeitos Defect centers Electron paramagnetic resonance Índice de refração não linear Microscopia eletrônica de transmissão Nanopartículas de prata Nonlinear refractive index Optical absorption Ressonância paramagnética eletrônica Silver nanoparticles Tellurite glasses Termoluminescência Thermoluminescence Transmission electron microscopy Varredura Z Vidros teluritos Z-scan
278	Infrarotellipsometrische Untersuchungen zur oberflächenverstärkten Infrarotabsorption Buskühl, Martin 23 June 2003 (has links) Auf dielektrische Substrate wurden Schichten aus Gold thermisch aufgedampft. Die Schichten wurden neben anderen Methoden wie AFM oder der Messung der Schichtleitfähigkeiten hauptsächlich mit Hilfe der spektroskopischen IR-Ellipsometrie (SIRE) in einem Schichtdickenbereich von 4 bis 60 nm systematisch untersucht. Aus den primär ermittelten ellipsometrischen Parametern tan(Psi) und Delta lassen sich der Brechungsindex n und der Absorptionsindex k bestimmen und auch weitere Größen wie z.B. der elektrische Widerstand bzw. die elektrische Leitfähigkeit errechnen. Die untersuchten Schichten lassen sich anhand der optischen, topographischen und elektrischen Eigenschaften in drei Gruppen einteilen: Dielektrische, aus isolierten Goldinseln bestehende Filme (4 bis 6 nm), Schichten in einem Übergangsbereich (8 bis ca. 16 nm), metallische Schichten (ab ca. 16 nm). Die dielektrischen Goldinselfilme zeigen optische Eigenschaften, die bislang für keine anderen Proben beschrieben worden sind. Der Brechungsindex n ist hoch (4 bis 9 bei 2400/cm) und der Absorptionsindex k klein (0 bis 4 bei 2400/cm). Beide Indizes sind spektral weitgehend konstant. Daß diese Filme dielektrische Eigenschaften besitzen, steht in direktem Widerspruch zur allgemeinen SEIRA-Literatur. Die Inselstruktur der dielektrischen Filme verursacht einen Verstärkungseffekt, der als Oberflächenverstärkte Infrarotabsorption (surface-enhanced infrared absorption - SEIRA) bekannt ist. Es zeigte sich, daß die optischen Konstanten der Filme einen erheblichen Einfluß auf die SEIRA-Verstärkung ausüben. Um Inselfilme mit reproduzierbaren optischen Eigenschaften herstellen zu können, wurde ein lithographisches Verfahren entwickelt. Auf einer geschlossenen, homogenen Goldschicht wurden monodisperse Nanopartikel aus Polystyrol (PS) in einer Monolage deponiert. Die PS-Nanopartikel dienten in einem trockenen Ätzprozeß im Ar-Plasma als lithographische Maske, um die darunterliegende Au-Schicht zu strukturieren. / Thin films were produced on dielectric substrates by thermal evaporation of gold in a high vacuum chamber. These films were investigated systematically in a range between 4 and 60 nm thickness. The method mainly applied was the spectroscopic IR-ellipsometry (SIRE), in addition to other methods like AFM or sheet resistance measurement. The primary results are the ellipsometric parameters tan(Psi) and Delta. They were used to determine the refractive index n and the absorption index k. Electrical parameters can also be calculated. Depending on the optical, topographical and electrical properties the population of different layers can be divided into three parts: dielectric films with isolated gold islands (4 to 6 nm), layers in a transient area (8 to ca. 16 nm), metal films (ca. 16 to 60 nm). The optical properties shown by dielectric gold island films were never before described for other samples. The refractive index n is high (4 to 9 at 2400/cm) and the absorption index small (0 to 4 at 2400/cm). Both indices are nearly constant in the spectral range. Directly in contrast to the SEIRA-literature the island films show dielectric properties. The island structure of the dielectric films gives rise to an enhancement effect called surface-enhanced infrared absorption (SEIRA). It could be shown that the optical constants of the island films have a considerable influence on the enhancement factors. A lithographic method was developed in order to find a way for manufacturing island films with reproducible optical properties. Monodispers polystyrene nanoparticles were deposited in a monolayer on a dense gold layer on a dielectric substrate. The layer of nanoparticles was used as a mask for a dry etch process in a reactive Ar-plasma. Infrarot-Ellipsometrie SEIRA optische Konstanten Inselfilme dünne Schichten Nanopartikel Monolagen Lithographie spectroscopic infrared ellipsometry optical constants refractive index absorption index gold island films SEIRA surface enhanced infrared absorption thin films sheet resistance langmuir blodgett films thermal evaporation E field elliptical polarisation Airy Fresnel effective medium approximation EMA gold nanoparticles contact angle lithography spincoating dipping 540 Chemie 30 Chemie ddc:540
279	Couches nanostructurées par dépôt en incidence oblique : corrélations microstructure et propriétés optiques pour application aux traitements antireflets hautes performances dans le visible étendu et l'infrarouge / Nanostructured layers by oblique incidence deposition : Microstructure andoptical properties correlations applicated to high-performance anti-reflectiontreatments in extended visible and infrared range Maudet, Florian 15 November 2018 (has links) Les traitements antireflets (AR) sont très largement utilisés pour améliorer la transmission de systèmes optiques composés de hublots, lentilles, de lames séparatrices,… Dans cette thèse les gammes spectrales visées sont le visible étendu [400-1800nm] et le moyen infrarouge [3,7-4,8µm]. La méthode de nanostructuration par dépôts de films minces utilisant des techniques PVD en incidence oblique (Oblique Angle Deposition) a été choisie car elle permet d’envisager des AR hautes performances sur une large gamme de longueur d’onde, via un procédé industrialisable. L’introduction de porosité via le contrôle des angles de dépôt est utilisée pour nanostructurer l’architecture de chaque couche et de l’empilement ; méthode permettant de modifier et d’optimiser les propriétés optiques des couches constituantes en vue d’un design complet optimal. Une cartographie des indices effectifs accessibles par OAD a été dégagée concernant les trois matériaux déposés (TiO2, SiO2 et Ge). Mais les propriétés optiques de ces couches nanostructurées diffèrent largement de celles des couches denses du fait de la présence d’anisotropie, de gradient d’indice, de diffusion et d’absorption. A partir de caractérisations microstructurales, chimiques et optiques poussées (AFM, MEB, MET, tomographie FIB, tomographie MET, EDX, EELS, spectrophotométrie et ellipsométrie généralisée) un modèle optique analytique plus complexe et couplé à des analyses par éléments finis (FDTD) est présenté. L’ensemble du travail a permis d’élaborer par OAD de simples antireflet bicouches démontrant déjà de hauts niveaux de transmission, supérieurs aux traitements AR existants (interférentiel) ou en développement (Moth-eyes). / Anti-reflective (AR) coatings are widely used to improve the transmission of optical systems composed of window, lenses, separating filters,... In this thesis, the spectral ranges targeted are the extended visible [400-1800nm] and the mid infrared [3.7-4.8µm]. Thin film deposition nanostructuring method using oblique angle deposition (oblique angle deposition) PVD technique was chosen because it allows high performance AR to be considered over a wide wavelength range, by an industrial process. The introduction of porosity with the control of deposition angle is used to nanostructure the architecture of each layer and stack; a method for modifying and optimizing the optical properties of the constituent layers for optimal complete design. A mapping of the effective indices accessible by OAD has been identified for the three materials deposited (TiO2, SiO2 and Ge). However optical properties of these nanostructured layers differ greatly from those of dense layers due to the presence of anisotropy, index gradient, diffusion and absorption. Based on advanced microstructural, chemical and optical characterizations (AFM, SEM, TEM, FIB tomography, TEM tomography, EDX, EELS, spectrophotometry and generalized ellipsometry) a more complex analytical optical model coupled with finite element analyses (FDTD) is presented. All the work has enabled OAD to develop simple two-layer anti-reflective coatings that already demonstrate high levels of transmission, superior to existing (interferential) or work in progress (Moth-eyes) AR treatments. Antireflet Dépôt incidence oblique Gradient d'indice Visible proche infrarouge Moyen infrarouge Ellipsométrie généralisée Spectrophotométrie Anisotropie optique Milieux effectifs Fdtd Tomographie Tem Diffusion Antireflective coating Oblique angle deposition Gradient refractive index Visible NIR Mwir Generalized ellipsometry Spectrophotometry Anisotropy Effective medium approximation Fdtd Tomography Tem Scattering 621.36 535.2
280	Complex photonic structures in nature : from order to disorder Onelli, Olimpia Domitilla January 2018 (has links) Structural colours arise from the interaction of visible light with nano-structured materials. The occurrence of such structures in nature has been known for over a century, but it is only in the last few decades that the study of natural photonic structures has fully matured due to the advances in imagining techniques and computational modelling. Even though a plethora of different colour-producing architectures in a variety of species has been investigated, a few significant questions are still open: how do these structures develop in living organisms? Does disorder play a functional role in biological photonics? If so, is it possible to say that the optical response of natural disordered photonics has been optimised under evolutionary pressure? And, finally, can we exploit the well-adapted photonic design principles that we observe in Nature to fabricate functional materials with optimised scattering response? In my thesis I try to answer the questions above: I microscopically investigate $\textit{in vivo}$ the growth of a cuticular multilayer, one of the most common colour-producing strategies in nature, in the green beetles $\textit{Gastrophysa viridula}$ showing how the interplay between different materials varies during the various life stages of the beetles; I further investigate two types of disordered photonic structures and their biological role, the random array of spherical air inclusions in the eggshells of the honeyguide $\textit{Prodotiscus regulus}$, a species under unique evolutionary pressure to produce blue eggs, and the anisotropic chitinous network of fibres in the white beetle $\textit{Cyphochilus}$, the whitest low-refractive index material; finally, inspired by these natural designs, I fabricate and study light transport in biocompatible highly-scattering materials.

Search results