Background: Platinum group metal (PGM) mining and refining is a large constituent of the mining sector of South Africa and contributes significantly to the gross domestic product. The PGMs include the rare metals platinum (Pt), palladium (Pd), rhodium (Rh), ruthenium (Ru), iridium (Ir) and osmium (Os). During the refining process workers are potentially exposed to various chemical forms of the PGMs via the respiratory and dermal exposure routes. Historically, emphasis has been on respiratory exposure while the extent of skin exposure is still unknown. Among the different forms of PGMs, the salts are potential sensitisers, with platinum being a known respiratory sensitiser. Workers occupationally exposed to platinum and rhodium have reported respiratory as well as skin symptoms. However, it is unknown if these metals in the salt form are permeable through human skin, and whether dermal exposure could contribute to sensitisation. Evidence regarding differences between African and Caucasian skin anatomy and structure, as well as permeation through skin is contradictory, and no information is available on metal permeation through African skin. The in vitro diffusion method has been utilised successfully in occupational toxicology to demonstrate that metals such as chromium, cobalt and nickel, to name a few, permeate through human skin. The permeability of platinum and rhodium has not been investigated previously. Aims and objectives: The research aim was to obtain insight into the permeability of platinum and rhodium through intact human skin and to provide information needed to determine the potential health risk following dermal exposure to these metals. The specific objectives included: (i) to critically review the in vitro diffusion method that is used to determine the permeability of metals through human skin, (ii) to investigate the permeation of potassium tetrachloroplatinate (K2PtCl4) and rhodium chloride (RhCl3) as representative PGM salts through intact human skin over a 24-hour period, (iii) to evaluate the difference in permeability of platinum and rhodium through intact human skin, (iv) to evaluate the difference in permeability of platinum through intact African and Caucasian human skin. Methods: Abdominal skin obtained after cosmetic procedures was obtained from five female Caucasian and three female African donors between the ages of 28 and 52 with ethical approval from the North-West University. Full thickness skin tissue was mounted in a vertical Franz diffusion cell. Skin integrity was tested by measuring the electrical resistance across the skin before and after conclusion of the experiments, using a Tinsley LCR Data bridge Model 6401. The donor solution of 32.46 mg K2PtCl4 in 50 ml of synthetic sweat (pH 6.5), and 43.15 mg RhCl3 in 50 ml of synthetic sweat (pH 6.5) was prepared. The donor solution was applied to the stratum corneum side of the skin and physiological receptor solution (pH 7.35) was added to the receptor compartment. The concentration of the metals in the receptor solution was determined by high resolution inductively coupled plasma-mass spectrometry after extraction at various intervals during the 24 hours of the study. After completion of the study, the skin was rinsed four times to remove any platinum or rhodium remaining on the skin surface. The skin was digested using hydrogen peroxide, nitric acid and hydrochloric acid during different steps to determine the mass of the metals remaining in the skin by inductively coupled plasma-optical emission spectrometry. Results: The comparison of published in vitro skin permeation studies involving metals is impeded by the variations in the experimental design and dissimilarity in the reporting of results. Differences in experimental design included, most noticeably, the use of various donor and receptor solutions, different temperatures wherein the receptor compartment was placed, differences in skin thickness and variations in exposed skin surface areas. The metals considered in the review, namely chromium, cobalt, gold, lead, mercury, nickel, platinum, rhodium and silver, permeate through intact human skin under physiological conditions. Large variations in the permeability results were observed, with the notable differences in methodology as the probable reason. Results obtained from the in vitro experiments indicate that platinum and rhodium permeated through intact Caucasian skin with flux values of 0.12 and 0.05 ng/cm2/h, respectively. The cumulative mass of platinum (2.57 ng/cm2) that permeated after 24 hours of exposure was statistically significantly (p = 0.016) higher than rhodium permeation (1.11 ng/cm2). The mass of platinum (1 459.47 ng/cm2) retained in the skin after 24 hours of exposure was statistically significantly (p < 0.001) higher than rhodium retention (757.04 ng/cm2). The comparison of permeability between two different racial groups indicates that platinum permeated through the skin of both racial groups with the flux through African skin found as 1.93 ng/cm2/h and 0.27 ng/cm2/h through Caucasian skin. The cumulative mass of platinum permeated after 24 hours of exposure was statistically significantly (p = 0.044) higher through African skin (37.52 ng/cm2) than Caucasian skin (5.05 ng/cm2). The retention of platinum in African skin (3 064.13 ng/cm2) was more than twice the mass retained in Caucasian skin (1 486.32 ng/cm2). Conclusions: The in vitro diffusion method is an applicable method to determine skin permeability of metals. However, the experimental design and format of data reporting should be standardised to enable comparison of results from different studies. Platinum and rhodium permeated through intact human skin, with platinum permeation significantly higher. African skin was significantly more permeable by platinum than Caucasian skin. Both platinum and rhodium were retained inside the skin after 24 hours of exposure, possibly forming a reservoir which could contribute to continued permeation through the skin even after removal thereof from the skin. Platinum and rhodium permeated through full thickness skin and thereby could possibly contribute to local skin symptoms such as dermatitis and urticaria found in occupationally exposed workers. By permeating through the upper layers of the skin, these metals could potentially reach the viable epidermis and contribute to sensitisation. / PhD (Occupational Hygiene), North-West University, Potchefstroom Campus, 2015

Background: Platinum group metal (PGM) mining and refining is a large constituent of the mining sector of South Africa and contributes significantly to the gross domestic product. The PGMs include the rare metals platinum (Pt), palladium (Pd), rhodium (Rh), ruthenium (Ru), iridium (Ir) and osmium (Os). During the refining process workers are potentially exposed to various chemical forms of the PGMs via the respiratory and dermal exposure routes. Historically, emphasis has been on respiratory exposure while the extent of skin exposure is still unknown. Among the different forms of PGMs, the salts are potential sensitisers, with platinum being a known respiratory sensitiser. Workers occupationally exposed to platinum and rhodium have reported respiratory as well as skin symptoms. However, it is unknown if these metals in the salt form are permeable through human skin, and whether dermal exposure could contribute to sensitisation. Evidence regarding differences between African and Caucasian skin anatomy and structure, as well as permeation through skin is contradictory, and no information is available on metal permeation through African skin. The in vitro diffusion method has been utilised successfully in occupational toxicology to demonstrate that metals such as chromium, cobalt and nickel, to name a few, permeate through human skin. The permeability of platinum and rhodium has not been investigated previously. Aims and objectives: The research aim was to obtain insight into the permeability of platinum and rhodium through intact human skin and to provide information needed to determine the potential health risk following dermal exposure to these metals. The specific objectives included: (i) to critically review the in vitro diffusion method that is used to determine the permeability of metals through human skin, (ii) to investigate the permeation of potassium tetrachloroplatinate (K2PtCl4) and rhodium chloride (RhCl3) as representative PGM salts through intact human skin over a 24-hour period, (iii) to evaluate the difference in permeability of platinum and rhodium through intact human skin, (iv) to evaluate the difference in permeability of platinum through intact African and Caucasian human skin. Methods: Abdominal skin obtained after cosmetic procedures was obtained from five female Caucasian and three female African donors between the ages of 28 and 52 with ethical approval from the North-West University. Full thickness skin tissue was mounted in a vertical Franz diffusion cell. Skin integrity was tested by measuring the electrical resistance across the skin before and after conclusion of the experiments, using a Tinsley LCR Data bridge Model 6401. The donor solution of 32.46 mg K2PtCl4 in 50 ml of synthetic sweat (pH 6.5), and 43.15 mg RhCl3 in 50 ml of synthetic sweat (pH 6.5) was prepared. The donor solution was applied to the stratum corneum side of the skin and physiological receptor solution (pH 7.35) was added to the receptor compartment. The concentration of the metals in the receptor solution was determined by high resolution inductively coupled plasma-mass spectrometry after extraction at various intervals during the 24 hours of the study. After completion of the study, the skin was rinsed four times to remove any platinum or rhodium remaining on the skin surface. The skin was digested using hydrogen peroxide, nitric acid and hydrochloric acid during different steps to determine the mass of the metals remaining in the skin by inductively coupled plasma-optical emission spectrometry. Results: The comparison of published in vitro skin permeation studies involving metals is impeded by the variations in the experimental design and dissimilarity in the reporting of results. Differences in experimental design included, most noticeably, the use of various donor and receptor solutions, different temperatures wherein the receptor compartment was placed, differences in skin thickness and variations in exposed skin surface areas. The metals considered in the review, namely chromium, cobalt, gold, lead, mercury, nickel, platinum, rhodium and silver, permeate through intact human skin under physiological conditions. Large variations in the permeability results were observed, with the notable differences in methodology as the probable reason. Results obtained from the in vitro experiments indicate that platinum and rhodium permeated through intact Caucasian skin with flux values of 0.12 and 0.05 ng/cm2/h, respectively. The cumulative mass of platinum (2.57 ng/cm2) that permeated after 24 hours of exposure was statistically significantly (p = 0.016) higher than rhodium permeation (1.11 ng/cm2). The mass of platinum (1 459.47 ng/cm2) retained in the skin after 24 hours of exposure was statistically significantly (p < 0.001) higher than rhodium retention (757.04 ng/cm2). The comparison of permeability between two different racial groups indicates that platinum permeated through the skin of both racial groups with the flux through African skin found as 1.93 ng/cm2/h and 0.27 ng/cm2/h through Caucasian skin. The cumulative mass of platinum permeated after 24 hours of exposure was statistically significantly (p = 0.044) higher through African skin (37.52 ng/cm2) than Caucasian skin (5.05 ng/cm2). The retention of platinum in African skin (3 064.13 ng/cm2) was more than twice the mass retained in Caucasian skin (1 486.32 ng/cm2). Conclusions: The in vitro diffusion method is an applicable method to determine skin permeability of metals. However, the experimental design and format of data reporting should be standardised to enable comparison of results from different studies. Platinum and rhodium permeated through intact human skin, with platinum permeation significantly higher. African skin was significantly more permeable by platinum than Caucasian skin. Both platinum and rhodium were retained inside the skin after 24 hours of exposure, possibly forming a reservoir which could contribute to continued permeation through the skin even after removal thereof from the skin. Platinum and rhodium permeated through full thickness skin and thereby could possibly contribute to local skin symptoms such as dermatitis and urticaria found in occupationally exposed workers. By permeating through the upper layers of the skin, these metals could potentially reach the viable epidermis and contribute to sensitisation. / PhD (Occupational Hygiene), North-West University, Potchefstroom Campus, 2015

Le motif imidazole, un hétérocycle à 5 atomes contenant 2 atomes d’azote et trois atomes de carbone, présente des propriétés physico-chimiques intéressantes qui en font un composé de choix pour plusieurs applications. Parmi ces propriétés, la fonctionnalisation simple des deux atomes d’azote pour former un sel d’imidazolium est très intéressante. Ces sels sont d’excellents précurseurs de carbènes N-hétérocycliques (NHC) et sont couramment utilisés pour synthétiser des ligands en vue d’une utilisation en catalyse organométallique. D’autre part, cette famille de composés possède des propriétés anionophores permettant une utilisation en transport anionique. Le présent travail contient les résultats de travaux concernant ces deux domaines, soit la catalyse et le transport anionique. Dans un premier temps, les propriétés de dérivés de l’imidazole sont exploitées pour former un catalyseur de type palladium-NHC qui est utilisé pour catalyser la réaction de Suzuki-Miyaura en milieu aqueux. L’efficacité de ce catalyseur a été démontrée en utilisant aussi peu que 0,001 mol% pour un rendement quantitatif. Il s’agit de la première occurrence d’un processus hétérogène et recyclable dans l’eau, utilisant un catalyseur de type Pd-NHC et qui ne nécessite aucun additif ou co-solvant. Le recyclage a été prouvé jusqu’à 10 cycles sans diminution apparente de l’activité du catalyseur. Dans un second temps, plusieurs sels d’imidazolium ont été testés en tant que transporteurs transmembranaires d’anions chlorures. Les propriétés intrinsèques des sels utilisés qui en font des transporteurs efficaces ont été élucidées. Ainsi, les paramètres qui semblent affecter le plus le transport anionique sont le changement du contre-anion du sel d’imidazolium de même que la propension de ce dernier à s’auto-assembler via une succession d’empilements-π. De plus, les propriétés du transport ont été élucidées, montrant la formation de canaux transmembranaires qui permettent non-seulement la diffusion d’ions Cl-, mais aussi le transport de protons et d’ions Ca2+. L’intérêt de cette recherche repose d’abord dans le traitement de diverses pathologies voyant leur origine dans le dysfonctionnement du transport anionique. Cependant, les propriétés bactéricides des sels d’imidazolium utilisés ont été identifiées lors des dernières expériences. / The imidazole moiety is a 5-membered heterocyclic ring, containing 2 nitrogen atoms and 3 carbon atoms. It possesses interesting physico-chemical properties that make it an interesting choice for various uses. One of its most interesting properties is structural versatility, accessible by the simple alkylation of the two nitrogen atoms leading to the formation of an imidazolium salt. These salts are excellent N-heterocyclic carbene (NHC) precursors and are frequently used to synthesize ligands used in organometallic catalysis. In addition, imidazolium salts possess anionophoric properties, allowing their use in anion transmembrane transport. The current work contains the results of research in these two fields: catalysis and anion transport. First, the properties of imidazole derivatives were used to synthesize a palladium-NHC catalyst that was used for the Suzuki-Miyaura coupling in neat water. The efficiency of this catalyst was demonstrated by using loading as low as 0,001 mol% to get quantitative yields. It is the first occurrence of a heterogeneous and recyclable process in neat water using a NHC-Pd catalyst without the need to use either a co-solvent or an additive. The recycling was demonstrated by performing 10 consecutive runs of the reaction, without observing any diminishing of the catalyst’s activity. Second, many imidazolium salts were tested as transmembrane chloride anion carriers. The intrinsic properties of these salts that make them potent anion transporters were elucidated. Specifically, small modifications to the structure of these salts turned out to allow better self-association by π-stacking interactions and to increase their activity. Similarly, changing the counter-anion of these salts affected their transport effectiveness. Moreover, the transport properties were studied and showed the formation of transmembrane channels that allow the diffusion of chloride anions, but also of protons and calcium ions. The interest of this research lies in the possible treatment of various pathologies that originate from faulty anion transport. In addition, the bactericidal properties of imidazolium salts were also identified and may prove useful in the future work.

L’hypertension artérielle et l’obésité sont deux composantes conjointement reliées du syndrome métabolique. Les récepteurs de l’ANP (GCA) et de l’oxyde nitrique (GCs) ont des propriétés diurétiques, natriurétiques, vasodilatatrices et sont liés au contrôle de la pression. Des études récentes ont démontré leur implication dans l’obésité. Hypothèse : Une différence génétique au niveau du gène GCA pourrait contribuer à des différences physiologiques. La composante lipidique et/ou sodique de la diète pourrait influencer la fonction rénale, cardiaque et les valeurs anthropométriques différemment chez les souches congéniques. Objectifs : (1) Déterminer l’effet de la composante lipidique et sodique des diètes; (2) Évaluer l’influence de GCA sur la réponse physiologique des souches congéniques; (3) Expliquer les mécanismes physiologiques procurant une réduction de la pression artérielle chez la souche SM9. Méthodologie : Des modèles congéniques du rat Dahl (DSS) hypertendu, nourri avec une diète riche en gras (HF) ou normale (NF), ont été utilisés pour démontrer l’impact d’un segment chromosomique d’origine normotendue. Résultats : La souche SM9 a une prise de poids plus importante que SM12 et DSS sur diète HF malgré un apport alimentaire équivalent. La souche SM9 présente également un ratio masse adipeuse/masse maigre plus élevé que SM12 et DSS. Nous n’avons observé aucune augmentation de la pression artérielle en réponse à la diète HF pour les 3 souches malgré une augmentation du dommage rénal pour les 3 souches. Le dommage rénal est plus important chez DSS que pour les 2 congéniques. La réponse diurétique à l’ANP est plus élevée chez SM9 et est influencée par le contenu en sel dand la diète. La perte glomérulaire plus importante chez le rat DSS semble compensée par une augmentation de la réponse à l’ANP par les glomérules résiduels. Il y a une corrélation entre l’activité de GCA en réponse à l’ANP, les niveaux d’ARNm et le nombre de répétition du dinucléotide TA dans son promoteur. Le rat DSS présente une hypertrophie cardiaque plus importante que les deux souches congénique et ceci n’est pas modifié par la diète HF. Conclusion : Nos études ont permis de mettre en évidence un effet génétique impliquant le segment chromosomique normotendu contenant GCA dans la réponse à une diète HF chez le rat DSS. / Hypertension and obesity are two related components of the metabolic syndrome. The ANP receptor (GCA) and nitric oxide receptor (sGC) have diuretic, natriuretic, vasodilatory properties, and are linked to blood pressure control. Furthermore a recent study has demonstrated the implication of GCA and sGC in the development of obesity. Hypothesis: A genetic difference in GCA gene could contribute to physiological differences. The differencial lipid and/or sodium composition of the diet could influence the renal, cardiac and anthropometric values. Objectives: (1) To determine the effect of fat and sodium on the physiological parameters; (2) To evaluate the influence of GCA on the physiological response of the congenic rat; (3) To explain the mechanisms of the blood pressure reduction in SM9 rats. Methodology: Congenic model of DSS rat, fed with either high fat (HF) or normal (NF) diet, were used to demonstrate the impact of a chromosome segment from normotensive origin on physiological functions. C2SM9 contains GCA and sGC from normotensive origin while C2SM12 harbours only sGC from normotensive origin. Results: HF diet had negative feature on body composition, renal damage, creatinine clearance and inhibited the diuretic/natriuretic effect of ANP. The normotensive segment including GCA and sGC has reduced the blood pressure, improve the renal damage and increased the diuretic/natriuretic capacity of SM9 in response to ANP injection when compared to SM12 and DSS. GCA mRNA and the clearance receptor ratio were reduced in SM9 in the renal cortex and retroperitoneal fat. SM12 and SM9, containing the chromosomal segment that includes sGC, improve their lipid profile compared with DSS. Conclusion: Our results suggested a compensatory increase in the GCA levels for SM12 and DSS that is insufficient to improve their pathophysiologic status as observed in SM9. HF diet increases the metabolic syndrome in those rats.

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal.

Ce projet de thèse porte sur la recherche de nouveaux électrolytes et additifs dans le but d’améliorer la cyclabilité d’une électrode négative composite de formule Si0.32Ni0.14Sn0.17Al0.04C0.35 et d’obtenir une interface électrode|électrolyte stable. En effet, comme la plupart des matériaux à base de silicium, ce composite de grande capacité (plus de 600 mA.h.g-1) souffre actuellement d’une faible durée de vie provenant essentiellement des expansions volumiques qu’il subit lors de sa lithiation et de sa SEI défaillante. Deux types d'électrolytes ont été évalués : (i) un mélange de carbonates d’alkyles EC/PC/3DMC auquel a été ajouté un sel de lithium (LiPF6, LiTFSI, LiFSI ou LiDFOB) ainsi que des additifs aidant à la formation de la SEI tels que le carbonate de vinylène (VC) ou le carbonate de fluoroéthylène (FEC), (ii) des liquides ioniques (LI) contenant un cation ammonium quaternaire (N1114+), imidazolium (EMI+) ou pyrrolidinium (PYR+), associé à un anion à charge délocalisée comme le bis(trifluorométhanesulfonyl)amidure (TFSI-) ou le bis(fluorosulfonyl)amidure (FSI-). L’analyse du diagramme d’ionicité de Walden a permis de mettre en évidence la bonne dissociation de LiFSI et LiPF6 dans EC/PC/3DMC assurant ainsi des conductivités ioniques supérieures à 12 mS.cm-1. Bien que possédant des propriétés de transport a priori moins intéressantes dans ce mélange ternaire que les autres sels, LiDFOB forme en réduction une SEI permettant au composite de fournir les meilleures performances en cyclage sans additif avec 560 mA.h.g-1 pour un rendement coulombique de 98,4%. L’ajout d’additif est cependant nécessaire pour atteindre les objectifs fixés par le projet en termes de rendement coulombique (>99,5%). Dans ce cas, l’ajout de 2%VC+10%FEC au mélange ternaire est le plus intéressant avec LiPF6. Le matériau fourni ainsi des capacités de 550 mA.h.g-1 durant une centaine de cycles à un régime de C/5 avec un rendement coulombique de 99,8%. En milieu LI, les performances optimales sont atteintes avec le [EMI][FSI] et 1 mol.L-1 de LiFSI. Le composite atteint alors une capacité de 635 mA.h.g-1 durant 100 cycles à un régime de C/5 avec un rendement coulombique très proche de 100%, tout en s’affranchissant de l’ajout d’additifs. Malgré une viscosité bien plus élevée que celles des mélanges de carbonates d’alkyles, cette formulation permet de générer une SEI plus stable dont la nature, principalement minérale, est issue majoritairement des produits de réduction de FSI-. / This study focuses on new electrolytes and additives in order to improve the cyclability of a Si0.32Ni0.14Sn0.17Al0.04C0.35 negative composite electrode (Si-Sn) and to obtain a stable electrolyte|electrolyte interface. Indeed, like most silicon-based materials, this high-capacity Si-Sn composite (over 600 mA.hg-1) currently suffers from a short cycle life due to volume expansion during charge-discharge processes leading to the degradation of the SEI. To improve the quality of the interface, two kinds of electrolytes were evaluated: (i) mixtures of alkyl carbonates EC/PC/3DMC in which a lithium salt (LiPF6, LiTFSI, LiFSI or LiDFOB) and additives like SEI builder (vinylene carbonate (VC) or fluoroethylene carbonate (FEC)) were added, (ii) ionic liquids (IL) based on quaternary ammonium (N1114+), imidazolium (EMI+) or pyrrolidinium (PYR+) cation, associated with delocalized charge anions such as bis(trifluoromethanesulfonyl)imide (TFSI-) or bis(fluorosulfonyl)imide (FSI-). The Walden diagram confirms the efficient dissociation of LiFSI and LiPF6 in EC/PC/3DM ensuring ionic conductivities as high as 12 mS.cm-1. Although possessing limited transport properties in such a ternary mixture compared to other salts, LiDFOB forms, without additional additives, an high quality SEI allowing the composite to provide the best performances in half cells (560 mA.hg-1 and 98.4% coulombic efficiency). The use of additive is however necessary to reach the objectives fixed by the ANR research project in terms of coulombic efficiency (>99.5%). In this case, the addition of 2%VC+10%FEC to the ternary mixture is the most interesting composition with LiPF6 as lithium salt. So, the Si-Sn nanocomposite material reaches 550 mA.h.g-1 during 100 cycles at C/5 with 99.8% efficiency. In IL, the best performances are achieved in [EMI][FSI]/LiFSI (1 mol.L-1). The performances of the Si-Sn composite reaches 635 mA.h.g-1 for 100 cycles at C/5 with coulombic efficiency close to 100%, without additives. This electrolyte formulation generates a stable SEI which the mainly mineral composition, is predominantly derived from the reduction products of FSI-.

Le fonctionnement des batteries lithium-ion, qu’il soit normal ou dans des conditions abusives, est accompagné d’une génération de gaz en particulier lors des premiers cycles. Celle-ci est intrinsèque au dispositif et est soumise à de nombreux paramètres tels que les matériaux d’électrodes utilisés, l’électrolyte ou encore les conditions opératoires. Cette génération de gaz est délétère : elle conduit à l’augmentation de la pression interne des batteries et pose donc des problèmes de sécurité. Cette étude vise à quantifier les volumes de gaz générés et à comprendre les mécanismes liés à la surpression dans les batteries. A cet effet, le format de batterie « pouch cell » a été adopté tout au long de ce travail de thèse. L’électrolyte choisi est le mélange EC:PC:3DMC + 1 mol.L-1 LiPF6. La première partie de ce travail est dédiée à la mise au point d’un protocole expérimental basé sur (i) l’analyse des matériaux d’électrodes (NMC, LFP, Gr, et LTO), (ii) la solubilité de gaz (O2, H2) comparées à (CO2, CH4) par PVT, et (iii) la quantification des volumes de gaz générés durant le cyclage en pouch cell, corrélée aux performances électrochimiques. Une analyse préalable en demi-piles et en dispositifs complets Gr//NMC et LTO//LFP a également été réalisée afin d’anticiper les performances attendues en pouch cells. Une analyse critique des données (de la littérature et de nos mesures) a permis de définir une procédure optimisée pour obtenir des résultats reproductibles et comparables lors des mesures de volume en pouch cells. La seconde partie de cette thèse consiste en la quantification du volume de gaz produit au cours du cyclage des pouch cells Gr//NMC, Gr//LFP, LTO//LFP et LTO//NMC. Ainsi, les tensions de fin de charge, l’effet du sel et de la température ont été discutés pour dégager les paramètres déterminants dans la génération de gaz en particulier lors de la formation de la SEI. Enfin, une analyse de la composition du gaz récupéré a été effectué par GC-MS et FTIR. A partir de résultats obtenus, des mécanismes ont été proposés et discutés. / The functioning of lithium-ion batteries, may it be under normal use or under abusive conditions, is accompanied by gas generation, especially during the first cycles. This extent of gas generation is dependent on the choice of electrode materials, the electrolyte, and the operating conditions. This gas generation is detrimental: the build-up of pressure leads to the over-pressure in the battery, raising serious concerns. This study is aimed at understanding the fundamental mechanisms governing these reactions. To do so, the « pouch cell » configuration was adopted throughout this thesis. The electrolyte we worked on is the mixture EC:PC:3DMC + 1 mol.L-1 LiPF6. The first chapter of this work is dedicated to development of an experimental protocol based on (i) the analysis of the electrodes materials (NMC, LFP, Gr and LTO), (ii) the gas solubilities (O2, H2) compared to (CO2, CH4) by PVT method, and (iii) the quantification of the volume of generated gases during the cycling of pouch cells which was correlated to the electrochemical performances. A preliminary analysis of half-cells and full cells Gr//NMC and LTO//LFP were also conducted to foresee the performances of the pouch cells. A critical analysis of data taken from the literature and from our own experiments enabled the optimization of a proper procedure to get reproducible and comparable results. The second part of this thesis consists in the quantification of the volume of gases generated during the cycling of Gr//NMC, Gr//LFP, LTO//LFP and LTO//NMC pouch cells. In that respect, the voltages of the end of charge and the effect of salt and of temperature were discussed to figure out the essential parameters in the gas generation and in particular during the formation of SEI. Lastly, a compositional analysis of gases was performed using GC-MS and FTIR. Based on those results, a mechanism is proposed and discussed herein.

Les phosphines sulfonées sont les ligands hydrosolubles les plus utilisés en catalyse organométallique aqueuse. La méthode la plus courante d’introduction des groupements sulfonate sur une arylphosphine consiste en la réaction de celle-ci avec l’oléum sulfurique. Dans ce contexte, la première partie de cette thèse a été consacrée à la synthèse de nouvelles triarylphosphines sulfonées encombrées possédant des groupements naphtyle. Plus précisément, les phosphines sulfonées synthétisées ont été du type [(1 ou 2-naphtyl)x(phényl)3-x]phosphine (x = 1, 2, 3) avec en moyenne, deux groupes sodium sulfonate par molécule. Dans la seconde partie de cette thèse, le développement d’une nouvelle voie d’accès à des phosphines du type R-diphénylphosphines disulfonées, où R est un groupement sensible aux conditions drastiques de sulfonation a été mis en œuvre. Ce protocole met en jeu deux étapes : la première étape implique l’alkylation de la benzyldiphénylphosphine trisulfonée (BDPPTS) ou du 1,2-bis(diphénylphosphino)éthane tétrasulfoné (DPPETS) par un dérivé halogéné (RX) apportant le groupement R sensible. La seconde étape consiste en le clivage réducteur par l’aluminohydrure de lithium (LiAlH4) des sels de phosphonium ou de bis-phosphonium ainsi obtenus et conduit à la R-diphénylphosphine disulfonée. Les phosphines qui ont été synthétisées par cette méthode sont les n-octyl-, n-dodécyl-, n-hexadécyl-, phénéthyl- et but-3-ényl-diphénylphosphines disulfonées. Les phosphines sulfonées synthétisées dans le cadre de cette thèse ont été valorisées en tant que ligands dans la réaction d’hydroformylation du déc-1-ène catalysée au rhodium et assistée ou non par des cyclodextrines. / Sulfonated arylphosphanes are the most applied water-soluble ligands in aqueous organometalliccatalysis. Sodium sulfonate groups are commonly introduced on an arylphosphane by using sulfuric oleum(SO3/H2SO4) followed by neutralization with aqueous sodium hydroxide. In this context, the first part of thiswork was focused on the synthesis of new bulky sulfonated triarylphosphanes with naphtyl groups. Moreprecisely, sulfonated [(1 or 2-naphtyl)x(phenyl)3-x]phosphane (x = 1, 2, 3) with an average sulfonation degreearound two have been prepared. In the second part, a new and convenient synthesis pathway to disulfonatedR-diphenylphosphanes with R an oleum-sensitive group was developed. This route involves two steps: thefirst step is the alkylation of trisulfonated benzyldiphenylphosphane (BDPPTS) or tetrasulfonated 1,2-bis(diphenylphosphanyl)ethane (DPPETS) with an halide compound (RX) bearing the sensitive group R. Inthe second step, the synthetized trisulfonated phosphonium or tetrasulfonated bis-phosphonium salt aresubsequently cleaved by lithium aluminium hydride (LiAlH4) to give the corresponding disulfonated Rdiphenylphosphanes.The phosphanes obtained by this new methodology are the disulfonated n-octyl-, ndodecyl-,n-hexadecyl-, phenethyl-, and but-3-enyl-diphenylphosphanes. Most of the synthetized phosphanesin this work have then been tested as ligand in the rhodium catalyzed dec-1-ene hydroformylation assisted ornot by cyclodextrins.

D'après le magazine Terra eco (2014),48% des français pratiquent régulièrement la consommation collaborative et 32% ont l'intention de le faire. Malgré l'engouement des consommateurs pour ces alternatives d'échanges, nous constatons comparativement assez peu d'études sur ce sujet en marketing. Cette recherche se propose donc d'analyser les motivations des membres des réseaux physiques de consommation collaborative, à travers l'étude du Système d'échange local (SEL). Le chapitre I propose un état des lieux du SEL, à travers son histoire, son étendue, son objet et son fonctionnement. Le chapitre 2 présente le SEL sous son approche académique. Par une revue de la littérature, il montre comment les différentes disciplines expliquent cette réalité. Il se penche plus précisément sur les déterminants au sélisme, et se termine par la proposition d'un modèle d'influence des motivations au sélisme et de leurs antécédents sur la pratique séliste. Le chapitre 3, par une analyse de l6 entretiens semi-directifs de sélistes, complète et enrichi le modèle. Le chapitre 4traite de la méthodologie employée pour le tester, Le chapitre 5 s'attèle à la création d'une échelle des motivations au sélisme, ainsi qu'à la validation des échelles de mesure du modèle. Le chapitre 6 se consacre enfin au test du modèle et à I'approfondissement des résultats. Cette étude quantitative se base sur un échantillon de 957 sélistes. Les principaux apports de notre thèse consistent : en une modélisation du comportement du séliste ; en la découverte de deux nouvelles motivations à faire partie d'un SEL : se distraire et s'enrichir intellectuellement; en la création d'une échelle de mesure des motivations au sélisme; en l'analyse de leur influence sur la pratique séliste ; et en la création d'une typologie de sélistes. Pour finir et sur la base de ces résultats, des préconisations managériales sont proposées aux SEL, aux entrepreneurs sociaux ou privés de réseau de consommation collaborative, ainsi qu'à l'État et aux collectivités territoriales. / According to the magazine Terra Eco (20 I 4), 48%o of French people are regular users of collaborative consumption, and 32%o of them are considering doing it. Despite the consumer craze for those alternative exchanges, comparatively, only a few marketing studies on the topic are currently made, This research's aim is therefore to analyse the various motivations of members from a physical network of collaborative consumption through the study of the local exchange trading system (LETS). The first chapter is focused on a state of play of the LETS, through its history, its geographical extent, its aims and uses. The second chapter will observe the LETS under an academic point of view. Through a litterature review, it will show how the differents disciplines are explaining this reality. It will also highlight in details what is determining LETS practices, and will end up suggesting an influence model on motivations behind becoming a LETS member, and their antecedents to the LETS practice. The third chapter will strenghten the model by a deep analysis of l6 semi-directives interviews of LETS users. The fourth chapter will put a light on the methodology used to test it. The fifth chapter will define a motivation scale on why becoming a LETS member, and to validate the measuring scales of the model. The sixth chapter will finally test the model and dig the results deeper. This quantitative study is based on a sample of 957 LETS users. Our thesis main assets are: a modelisation of the LETS member behavior, the discovery of two new motivations to join a LETS-distraction and intellectual enrichment, the creation of a motivation scale behind the decision of joining a LETS, analysis of their influences on the LETS practice, and the creation of a LETS member typology. To conclude, and based on those results, we'll come up with managing advices to give to LETS, to social or private workers from collaborative consumption networks, and also to the State and to territorial collectivities.

La datation absolue des archives climatiques est essentielle pour comprendre les mécanismes du climat. Cette étude a porté sur la fraction fine (<63 μm) riche en aragonite (adaptée à la datation U/Th) et sur les tests de foraminifères planctoniques (>150 μm) d'une carotte de sédiments marins de la Mer des Caraïbes couvrant le dernier million d'années, en utilisant une approche minéralogique et des traceurs géochimiques. Les objectifs sont : 1) évaluer le<br />synchronisme entre le δ18O et les âges absolus de deux fractions de tailles différentes et 2) reconstruire les paléoenvironnements de la zone. La minéralogie de la fraction fine est contrôlée par les changements du niveau marin à l'échelle glaciaire-interglaciaire. Les décalages temporels entre le δ18O et le 14C des deux fractions durant la Terminaison I sont en partie expliqués par un modèle de bioturbation. Les essais de datation U/Th sur la fraction fine des Terminaisons II et V ont montré une contamination par du Th non-radiogénique, nécessitant des développements analytiques. Les reconstitutions des variations de δ18O de l'eau de mer suggèrent une diminution de la salinité de surface à la fin de la Transition Mid-Pléistocène, associée à la position de l'ITCZ au niveau de la Mer des Caraïbes.