401 |
Skener elektromagnetických polí a jeho využití při měření elektromagnetické kompatibility / Electromagnetic field scanner and its utilization in EMC measurementChupáč, Michal January 2013 (has links)
Master’s thesis is focused on making the acquaintance of EMC issues and ways of electromagnetic field scanner RS321 utilization for pre-compliance measurements. First part contains analysis of available equipment’s influence on measurement results on the basis of gathered specification. Next part includes an example measurement used as operational manual for scanner and its controlling program. The most important part is correction evaluation for performed EMI measurement of signal generator using its EMC certification protocol and application of gained correction curve on independent EMI measurement of device tested by EMC testing laboratory. Other possibilities of scanner utilization are mentioned in the next chapters. Last part of the thesis contains suitability evaluation of EMC scanner on the basis of findings from performed measurements.
|
402 |
Accuracy and Reliability of 3D Scanning Spatial Data when Capturing Limb Morphology for Use within Prosthetics and Orthotics: A Scoping Review / Nøjagtighed og pålidelighed af 3D scanning for spatial data ved afbildning af lemme morfologi til brug indenfor bandagistfaget: et scoping reviewBailey-Brændgaard, Miles, Enevoldsen, Peter Wibe January 2022 (has links)
Background: Scanners are becoming widespread in Prosthetics and Orthotics, replacing plaster casting in the manufacture of some types of devices. P&O shape capture must be accurate and reliable, so the device is comfortable and reproducible between clinicians/sessions. Objectives: To map knowledge on measuring accuracy and reliability of spatial data produced from 3D scanners. Methods: The study design was a scoping review using the Preferred Reporting Items for Systematic reviews and Meta-Analyses extension for Scoping Reviews (PRISMA-ScR). Studies published in or after 2010 in English with a full-text available that analyse either the accuracy/validity or reliability of human 3D scanning data within a P&O context. Sources were obtained from Pubmed, CINAHL, Scopus, Cochrane Library, Web of Science, and AMed databases on 25th March. Results: The search identified 115 studies of which 9 were included (7 experimental [4 prosthetic, 3 orthotic], 1 systematic review, 1 literature review). 7 analysed both reliability and accuracy/validity and 2 analysed reliability. High heterogeneity amongst studies’ methods, techniques, and equipment. Conclusion: Methods, techniques, and equipment used to measure accuracy/validity and reliability varied greatly though more so in the measurement of accuracy/validity. Within the studies, researchers called for more research on standardisation of measurement methods and techniques.
|
403 |
DIY technologie v digitálním sochařství / DIY technologies in digital sculptureVáňa, Dušan January 2020 (has links)
This dissertation thesis is focused on the search for the presence of DIY (Do It Yourself) technologies in the practice of digital sculpting, from the beginnings of this progressive way of creation to the present. The work, through three thematic areas, answers the main research questions: What kind of technology is or has the DIY phenomenon been represented in digital sculpture? How have these technologies influenced and are influencing the development and direction of digital sculpture? Within the first thematic area, the presence of the DIY phenomenon in the beginnings of digital creation of a spatial work of art is mapped until the moment of constituting the concept of Digital Sculpture, as a designation of this new way of creation. The second area deals with specific technologies of digital sculpture, in terms of technical tools and their DIY alternatives. The development of these alternative technologies and their influence on the gradual democratization of digital sculpture tools is investigated. The third area examines the creative methods of DIY, which have been integrated into the practice of digital sculpture.
|
404 |
Development of Sensitive In Vitro Assays to Assess the Ocular Toxicity Potential of Chemicals and Ophthalmic ProductsMcCanna, David January 2009 (has links)
The utilization of in vitro tests with a tiered testing strategy for detection of mild ocular irritants can reduce the use of animals for testing, provide mechanistic data on toxic effects, and reduce the uncertainty associated with dose selection for clinical trials. The first section of this thesis describes how in vitro methods can be used to improve the prediction of the toxicity of chemicals and ophthalmic products. The proper utilization of in vitro methods can accurately predict toxic threshold levels and reduce animal use in product development. Sections two, three and four describe the development of new sensitive in vitro methods for predicting ocular toxicity. Maintaining the barrier function of the cornea is critical for the prevention of the penetration of infections microorganisms and irritating chemicals into the eye. Chapter 2 describes the development of a method for assessing the effects of chemicals on tight junctions using a human corneal epithelial and canine kidney epithelial cell line. In Chapter 3 a method that uses a primary organ culture for assessing single instillation and multiple instillation toxic effects is described. The ScanTox system was shown to be an ideal system to monitor the toxic effects over time as multiple readings can be taken of treated bovine lenses using the nondestructive method of assessing for the lens optical quality. Confirmations of toxic effects were made with the utilization of the viability dye alamarBlue. Chapter 4 describes the development of sensitive in vitro assays for detecting ocular toxicity by measuring the effects of chemicals on the mitochondrial integrity of bovine cornea, bovine lens epithelium and corneal epithelial cells, using fluorescent dyes.
The goal of this research was to develop an in vitro test battery that can be used to accurately predict the ocular toxicity of new chemicals and ophthalmic formulations. By comparing the toxicity seen in vivo animals and humans with the toxicity response in these new in vitro methods, it was demonstrated that these in vitro methods can be utilized in a tiered testing strategy in the development of new chemicals and ophthalmic formulations.
|
405 |
Development of Sensitive In Vitro Assays to Assess the Ocular Toxicity Potential of Chemicals and Ophthalmic ProductsMcCanna, David January 2009 (has links)
The utilization of in vitro tests with a tiered testing strategy for detection of mild ocular irritants can reduce the use of animals for testing, provide mechanistic data on toxic effects, and reduce the uncertainty associated with dose selection for clinical trials. The first section of this thesis describes how in vitro methods can be used to improve the prediction of the toxicity of chemicals and ophthalmic products. The proper utilization of in vitro methods can accurately predict toxic threshold levels and reduce animal use in product development. Sections two, three and four describe the development of new sensitive in vitro methods for predicting ocular toxicity. Maintaining the barrier function of the cornea is critical for the prevention of the penetration of infections microorganisms and irritating chemicals into the eye. Chapter 2 describes the development of a method for assessing the effects of chemicals on tight junctions using a human corneal epithelial and canine kidney epithelial cell line. In Chapter 3 a method that uses a primary organ culture for assessing single instillation and multiple instillation toxic effects is described. The ScanTox system was shown to be an ideal system to monitor the toxic effects over time as multiple readings can be taken of treated bovine lenses using the nondestructive method of assessing for the lens optical quality. Confirmations of toxic effects were made with the utilization of the viability dye alamarBlue. Chapter 4 describes the development of sensitive in vitro assays for detecting ocular toxicity by measuring the effects of chemicals on the mitochondrial integrity of bovine cornea, bovine lens epithelium and corneal epithelial cells, using fluorescent dyes.
The goal of this research was to develop an in vitro test battery that can be used to accurately predict the ocular toxicity of new chemicals and ophthalmic formulations. By comparing the toxicity seen in vivo animals and humans with the toxicity response in these new in vitro methods, it was demonstrated that these in vitro methods can be utilized in a tiered testing strategy in the development of new chemicals and ophthalmic formulations.
|
Page generated in 0.0367 seconds