Wood has been traditionally used as a construction material in Nordic countries such as Sweden dating back to the 12th century. Using wood as a building material for the construction of buildings with more than two stories became the norm around the 1850s and has only increased with the pressing need for more sustainable and environmentally friendly alternatives to materials such as concrete. The aim of this thesis is to bring attention to attitudes towards environmental, economic, and social sustainability of commercial multi-story wood buildings amongst industry professionals. Qualitative data was gathered through digitally conducted, semistructured interviews with six people from within fields related to carpentry, architecture, ecology, and forestry. Three buildings were briefly studied as a part of a case study on multi-story wood buildings: Fyrtornet in Malmö, Sweden, Sara  Cultural Centre in Skellefteå, Sweden, and The Oakwood Timber Tower in London, England. The results showed that the practice of constructing multi-story wood buildings wasn’t sustainable because of the intense short rotation forestry pushing ecosystems to extinction. Wood was still considered to be a good alternative to carbon intense materials such as concrete. Limitations include relying on only qualitative data as the methodology, for future research the author suggests conducting a comparative Life cycle assessment (LCA) with a cradle-to-cradle approach, as a way to study environmental impacts of timber versus other natural materials available in Sweden such as clay, straw and hemp.

This thesis presents the problem surrounding green marketing, which involves the lack of knowledge of green consumption by the consumer, and the threats of green washing from companies who present green marketing without achieving the green marketing criteria. An implementation of the green marketing theories in the cases of Patagonia and Klättermusen: green marketing five “I’s” and the green marketing three “C’s” was done in order to understand if the two companies fit the green marketing profile. This thesis aims to contribute to gain deeper knowledge from the outdoor consumer perspective on green marketing campaigns, and answer the question to how effective these campaigns are to the outdoor consumer, through a qualitative research.

The objective of this thesis was to understand the factors that affect the selection of remedial treatments for the complex staining of masonry materials on cultural resources located in environmentally sensitive sites such as Fort Livingston, Louisiana, on the Gulf Coast of the United States and other locations impacted by pollutants including crude oil. After the Deepwater Horizon oil spill in April 2010, the brick-and-tabby Fort was stained by crude oil. The EPA recommends SWA for removal of oil from solid surfaces such as masonry; however, limited research has been conducted into SWA effective for removal of crude oil from masonry, particularly in remote and environmentally sensitive locations. Research was conducted collaboratively at NCPTT and UT-Austin to identify a series of suitable SWA and to develop methods for evaluating SWA effectiveness in the laboratory. Products were selected for laboratory evaluation that do not require long dwell times, are easy to transport to the site, can be applied with portable equipment, produce effluent that can be collected for off-site disposal, and are listed on the EPA-published NCP Product Schedule. Two sets of 36 brick samples each were soiled with crude oil from the Fort. One set of samples was artificially weathered and one set was unweathered prior to being cleaned with selected six SWA. Laboratory evaluation shows that the primary factor affecting cleaner selection for remediation of brick masonry stained by light crude oil is the extent of weathering of oil on the masonry. For light crude oil, such as that spilled in the Gulf, organic solvent-based cleaners may be most effective if cleaning is possible soon after the staining occurs. Aqueous surfactant cleaners are most effective for removing weathered light crude oil from masonry. The following SWA listed in order of performance are recommended for field trials at Fort Livingston: 1. Cytosol; 2. SC-1000; 3. De-Solv-It APC; 4. De-Solv-It Industrial followed by De-Solv-It APC; 5. De-Solv-It Industrial followed by SC-1000. / text

Fluorescence spectroscopy was examined as a potential technique for identifying aerosol particles like bacterial spores. This technique was used for laboratory measurements on some common biological agent simulants. We have measured the intrinsic steady-state fluorescence emission spectra as a function of the excitation wavelength for several bacterial spores (washed and unwashed) in dry and aqueous suspensions at room temperature using excitation wavelengths from 200 to 600 nm. These measurements were compared to those of common, naturally occurring biological components like fungal spores and pollen and non spore samples like ovalbumin. The spectra of samples were combined into fluorescence profiles or fluorescence fingerprints. Different substrates were used for collection and detection of spores. Each bacterium produces a unique in vitro fluorescence profile when measured in dried and aqueous suspension and exhibits a strong maximum in its fluorescence emission spectrum near 330-340 nm. The fluorescence profiles were reproducible. The complexity of microorganisms made the interpretation of their spectral signature a difficult task. Principal components analysis (PCA) and cluster analysis were done as a data reduction technique for detection and identification from different backgrounds. PCA illustrates that linear combination of detected fluorescence intensities, which are present in different ratios in each of samples studied, can be used to discriminate biological agent simulants from other biological samples. The hydration effects, washing effects and the role of tryptophan on spore fluorescence were also investigated. The emission spectra of the dried spores showed a maximum near 330 nm, suggesting a hydrophobic environment for its tryptophan residues. The aqueous solution of tryptophan showed fluorescence shifted to 360 nm and in ethanol solution the maximum was shifted to 340 nm, suggesting a rather more polar average location of the tryptophan. To find the limit of detection we measured the quantum efficiency (QE) of a few samples. We concluded that spectroscopy techniques coupled with effective interpretation models are applicable to biological simulants agents. Index Heading: Bacteria; Spores; Identification; Fluorescence; Fluorescence Quantum Efficiency; Principal Components Analysis; Cluster Analysis.

Nesta dissertação apresentaremos um m´método para detecção automática da quantidade de carga adicionada em uma lavadora de roupas para que esta possa adequar o seu nível de água e ciclo de lavagem. A máquina na qual este algoritmo foi desenvolvido é uma máquina de eixo vertical (abertura na parte de cima) e utiliza um motor síncrono trapezoidal (BPM do inglês Brushless Permanent Magnet). O algoritmo que será descrito aqui utiliza uma rede neural para inferir a quantidade de carga baseado em informações disponíveis nesta m´máquina como, corrente do motor, velocidade do cesto e tensão de alimentação, entre outros, essas informações estão disponíveis na maioria dos modelos de máquinas de lavar roupas que utilizam esse tipo de motor. A utilização de um algoritmo para detectar automaticamente e de forma precisa a quantidade de roupas é muito importante, pois dessa forma evita-se o desperdício de insumos e, principalmente, água no processo de lavagem. Além disso apresentaremos os resultados que mostram a diferença entre o uso da rede neural e o método linear chamado planejamento de experimento (DOE do inglês Design of Experiments). / In this dissertation a method for automatic load size detection will be presented, so the water level and the washing cycles can be chosen by a washing machine. The machine where this algorithm was developed is a top load washing machine that uses a brushless permanent magnet motor (BPM motor). The algorithm that is going to be described here uses a neural network to deduce the load size based on information available on this machine such as, motor current, basket speed, power supply voltage and others. These signals are available on most washing machines that uses this kind of motor. The use of an algorithm that detects automatically and precisely the load amount is very important in order to avoid the waste of soap, bleach and softner and, more importantly, water during the wash task. Moreover the use of the neural network will be compared with a linear methods called DOE (design of experiment). Finally, results showing the difference between both methods are presented.

A Podridão Floral dos Citros é uma doença que tem limitado a produção citrícola em várias regiões produtoras do mundo. A sintomatologia esta associada principalmente quando coincide alta pluviosidade e intensa florada. O fungo se encontra na forma quiescente em órgãos vegetais e na presença de nutrientes exógenos reinicia o processo de infecção. Os objetivos do trabalho foram: (i) avaliar o efeito das águas de lavagem bruta (ALB) obtidas a partir de flores, botões e folhas de laranjeira Valência, sobre o crescimento micelial, germinação e formação de apressórios por C. acutatum; (ii) avaliar o efeito dos compostos voláteis liberados pelas ALB e as frações produzidas a partir das águas de lavagem de flores e botões sobre a germinação e formação de apressórios; (iii) estabelecer uma metodologia para observação de estruturas de infecção em folhas de citros. Foram realizados dois bioensaios de germinação e formação de apressórios e crescimento micelial para as águas de lavagem bruta. O primeiro representado pelos tratamentos: testemunha (T), água de lavagem das flores (F), botões (B), folhas novas (FN), folhas velhas (FV) e a diluição da água das flores em 1:10, 1:100, 1:1000 e 1:10000 (v/v). O segundo por testemunha (T), água de lavagem das flores (F), botões (B), folhas novas (FN), folhas velhas (FV) e a autoclavagem destes mesmos tratamentos. Os voláteis liberados pelas águas de lavagem de flores e botões primeiramente foram identificados por SPME-CG-MS e logo após as frações foram obtidas de acordo com o tempo de retenção de cada pico encontrado, totalizando 5 frações para cada amostra. Realizou-se um bioensaio de germinação e formação de apressórios com as frações obtidas em contato direto com os esporos. Para a observação de estruturas de infecção, discos foliares de plantas cítricas foram inoculados, submetido a clareamento e posterior coloração para a observação ao microscópio. Os resultados das ALB mostraram que todos os tratamentos estimularam a germinação e formação de apressórios por C. acutatum. Os voláteis não apresentaram efeito indutor sobre os esporos, porém quando fracionados e colocados em contato direto com as estruturas, as frações botão apresentaram uma maior atividade indutora quando comparada a testemunha. Nenhum tratamento alterou o crescimento micelial do fungo. A melhor visualização dos esporos nas folhas ocorreu 48 horas após a inoculação. Com base nesses resultados, pode-se concluir que as águas de lavagem estimulam a germinação e formação de apressórios, e apenas os voláteis presentes nas frações botão estimularam a germinação de C. acutatum. / The Post Bloom Fruit Drop is a limiting disease in citrus production around the world and the symptoms are associated to high rainfall and intense blooming. The fungus is found in a quiescent state in plant organs and under the presence of exogenous nutrients it restarts the infection process. Thus, the objectives of the work were: (i) evaluate the direct effect of washing crude water (WCW) obtained from flowers, flower buds and leaves of Valencia orange trees on the mycelial growth, germination and appressorium formation by C. acutatum; ii) evaluate the effect of volatile compounds released by the WCW and the fractions obtained from the washing water from flower and flower buds in the germination and appressorium formation, and (iii) establish a methodology for observing structures of fungal infection in citrus leaves. Two bioassays were carried out to evaluate germination, appressorium formation and mycelial growth in the presence of WCW. The first one was represented by the treatments: control (C), washing water from flowers (F), flowers buds (FB), young leaves (YL), old leaves (OL), and dilution (1:10, 1:100 , 1:1000 and 1:10000; v/v ) from the flower washing water. The second one included control (C), washing water from flowers (F), flowers buds (FB), young leaves (YL), old leaves (OL) and all of washings autoclaved. The volatiles released by the washing water from flowers and flowers buds were first separated and identified by SPME-GC-MS and then fractions were obtained according to the retention time of each peak found, making up five fractions for each sample. A bioassay for germination and appressorium formation was carried out by using the fractions obtained and placed into direct contact with the spores. To observe the fungal infection structures, leaf discs from citrus plants were inoculated, subject to bleaching and then stained for observation under a microscope. The results obtained by using the WCW samples showed that all treatments stimulated spore germination and appressorium formation by C. acutatum. The volatiles did not show any inductive effect on the spores, but when fractionated and placed into direct contact with the fungal structures, the fractions from the flowers buds showed a higher inducing activity when compared to the control. None treatment changed the in vitro mycelial growth of the fungus and the best visualization of spores in the leaves occurred 48 hours after inoculation. Based upon on these results, it can be concluded that the crude washing water stimulated germination and appressorium formation, and only the volatiles present in the fraction flowers buds were able to stimulate the germination of C. acutatum spores.

Este trabalho teve como objetivo a reprodução, avaliação e caracterização de manchamentos provocados por desodorante antitranspirante, suor, produtos do processo de lavagem como detergente em pó, amaciante, temperatura de passadoria em camisetas de malhas de algodão. Buscando uma melhor caracterização destes manchamentos, foram realizados três grupos de estudo com indivíduos selecionados, propensos à obtenção de manchas na região das axilas. Os indivíduos fizeram uso de desodorante com e sem perfume e utilizaram camisetas por um período de onze dias, sendo que um dos indivíduos fez uso apenas da camiseta sem desodorante e, uma das camisetas foi submetida ao desodorante sem uso por indivíduos. Ao final de cada dia, as camisetas foram lavadas com detergente em pó, amaciante, secas em secadora e passadas, simulando uma condição de uso doméstico. As camisetas manchadas foram submetidas às avaliações instrumentais de espectrofotometria (colorímetro), Microscopia Eletrônica de Varredura (MEV), análise por Dispersão de Energia (EDS) e medição da efusividade e condutividade térmica e Espectrometria de Emissão Atômica por Plasma Acoplado Indutivamente (ICP-OES). Essas camisetas também foram submetidas a dois processos de remoção: por lavagem a seco (LS) e por agentes químicos (RAQ). Após o processo de remoção, as camisetas foram submetidas à avaliação colorimétrica instrumental, condutividade e efusividade térmica, MEV, resistência à ruptura. As análises colorimétricas para todas as camisetas utilizadas pelos participantes dos grupos de estudo mostraram valores de E* de (0,87 a 32,43), indicando uma alteração de cor perceptível visualmente na região das axilas. As microscopias das amostras também mostram um acúmulo de alguns materiais nessa região que pode ter influenciado a troca de calor do material com o ambiente, como mostraram os resultados de efusividade e condutividade. Este material acumulado, analisado pela técnica de ICP-OES, mostrou que a camiseta manchada apresentou 99,7% de alumínio a mais do que na camiseta original na região da axila, o que pode ser oriundo do contato com o desodorante que também apresenta elevados teores de alumínio em sua formulação. Os métodos utilizados para remoção apresentaram resultados satisfatórios, promovendo a remoção dos manchamentos nas camisetas, observado através da diminuição dos valores de E* e nos índices da Escala Cinza de Alteração da Cor, na avaliação colorimétrica instrumental. Entretanto, o processo de remoção por agentes químicos apresentou melhores resultados, tendo cerca de 70% de eficácia quando comparados ao método de lavagem a seco, podendo ser um método mais efetivo na remoção deste tipo de manchamento. / This work was carried out to reproduction, evaluation and characterization of staining caused by antiperspirant deodorant, sweat, products of the washing process and detergent powder, fabric softener, temperature ironing shirts in cotton knits. Searching for a better characterization of these staining, three groups of studies selected, prone to getting stains on the underarm area individuals, were performed. Individuals made use deodorant and fragrance with shirts and used for a period of eleven days, and one of the subjects only used the shirt without deodorant and one of the shirts was submitted to without deodorant use by individuals. At the end of each day the shirts were washed with detergent powder, fabric softener, dryer dried and pressed, simulating a condition of household. The stained shirts were subjected to instrumental evaluations spectrophotometry (colorimeter), Scanning Electron Microscopy (SEM), Energy Dispersive analysis (EDS) and measuring the effusivity and thermal conductivity and Atomic Emission Spectrometry by Inductively Coupled Plasma (ICP-OES). These shirts were also subjected to two processes: removal by cleaning (LS) and chemicals (RAQ). After the removal process tees instrumental colorimetric evaluation, conductivity and thermal effusivity, SEM, tensile strength were submitted. colorimetric analyzes for all t used by the participants of the study groups showed values of E * (0.87 to 32.43), indicating a change of color visually noticeable in the underarm area. The microscopy of the samples also showed an accumulation of some materials in this region that may have influenced the heat exchange material with the environment as showed the results of effusivity and conductivity. This accumulated material, analyzed by ICP-OES technique, showed that the stained shirt showed 99.7% more aluminum than the original shirt, which can be derived from contact with the deodorant that also has a high concentration of aluminum in its formulation. The methods used for removal showed satisfactory results, promoting the removal of staining tees, observed by decreasing the values of E * and indexes of Gray Scale Change Colors, instrumental colorimetric evaluation. However, the process of removal by chemical agents showed better results, about 70% efficiency when compared to the method of cleaning, may be a more effective method in removing this type of stain.

Recentemente, uma mudança de paradigma vem impactando toda a engenharia e manufatura na forma de se planejar, projetar, testar e construir produtos. A forma mais tradicional de desenvolvimento, que se caracterizava pelo processo seriado de múltiplos ciclos de design-construção-teste, vem sendo substituída gradativamente por processos de desenvolvimento guiados por simulação computacional. Decorrentes disso, os primeiros protótipos físicos são freqüentemente capazes de atingir os objetivos quando testados. Esta mudança, chamada também de projeto baseado em simulação, permite reduzir drasticamente o tempo de desenvolvimento de produtos e trazer a inovação para o mercado. Este trabalho apresenta uma forma computacional, via técnica de multicorpos, para se analisar a dinâmica de uma lavadora de eixo vertical. É proposto um protótipo virtual no software ADAMS, para estudo dinâmico de uma lavadora durante o processo crítico de centrifugação. O modelo virtual é posteriormente confrontado com dados experimentais, para sua validação. Uma extensa pesquisa bibliográfica foi realizada, com a intenção de capturar as técnicas mais usuais de modelamento e estudo dinâmico em lavadoras, bem como de compreender melhor o papel de seus componentes durante o processo crítico de centrifugação. / Recently a paradigm shift has impacted the engineering and manufacturing in the way of planning, designing, testing and building products. The most traditional way of product development, characterized by multiple cycles of design-build-test, has been substituted by a process based on computational simulation, where the first physical prototypes are capable of delivering the desired performance. This new way of developing products is called simulation based design and allows organizations to reduce drastically the product lead time and bring innovation to the market. This work presents a computational way to analyze the dynamic behavior of a top load washing machine using multibody system (MBS). It\'s proposed a virtual prototype developed in the ADAMS software, for dynamic study of a commercial washing machine during spin cycle. The virtual model is compared to experimental data for validation. An extensive research in the literature has been done in order to find the most usual ways of modeling and analyzing washing machine dynamics during spin.

A lavagem das mãos é reconhecida como uma das medidas mais importantes para prevenir as Infecções Hospitalares. Este estudo teve como objetivo comparar a execução e verificar a adesão aos passos da técnica de lavagem das mãos por alunos dos 2º, 3º e 4º anos de um Curso de Graduação em Enfermagem. A amostra constituiu-se de 113 alunos que estavam cumprindo estágio em instituições de saúde do município de São Paulo. Os dados foram coletados por meio de observação direta para a qual foi utilizado um instrumento em forma de “check-list" com os passos da técnica de lavagem das mãos, conforme recomendação do Ministério da Saúde do Brasil. Os resultados foram estatisticamente trabalhados, permitindo constatar que: a) os alunos dos 2º e dos 3º anos obtiveram melhor desempenho na execução da técnica de lavagem das mãos, com diferença estatisticamente significante, quando comparados ao 4º ano nos passos da técnica: “retirou jóias", “esfregou palma com dorso", “esfregou espaços interdigitais", “esfregou polegar" e “esfregou unhas". Apenas no item “fechou a torneira com papel toalha" o 4º ano apresentou-se melhor que os 2º e 3º anos; b) a adesão aos passos da técnica de lavagem das mãos dos alunos de todos os anos do curso foi muito baixa, pois na metade dos passos que compõe a técnica, os alunos apresentaram adesão menor que 50%; c) A porcentagem de alunos que executou TODOS OS PASSOS da técnica de lavagem das mãos CORRETAMENTE foi muito baixa, apenas 8,8%. Concluiu-se que os alunos do 4º ano obtiveram o pior desempenho e adesão muito baixa em quase todos os passos da técnica de lavagem das mãos, quando comparados aos dos 2º e 3º anos / Handwashing is known as one of the most important measures in preventing hospital-acquired Infections. This study had the objective of comparing the performance and verifying the adhesion of students from the 2nd, 3rd and 4th years of the Graduation nursing course to the steps of this technique. The sample was made of 113 students who were under the internship program in health institutions in the city of Sao Paulo. The data were collected through unobtrusive observation based on an instrument in a check-list form with all the steps of the hands-washing technique, as suggested by the Brazilian Health Ministry. The results were statistically treated showing that: a) the students from the 2nd and 3rd years had better results in the execution of the handwashing technique, with a significant statistical difference, when compared to the students from the 4th year considering the steps: “jewelry-removing", “rubbed the palm of the hand with its back", "rubbed spaces between fingers", “rubbed thumb" and “rubbed nails". Considering the item “closing the faucet with a paper towel" the students from the 4th year were better than the ones from the second and third years; b) the students from all years of graduation the 2nd, 3rd and 4th years showed low adhesion to the hands-washing technique steps, once they presented the adhesion to less than 50% of the steps; c) The percentage of students who performed ALL THE STEPS of the handwashing technique CORRECTLY was very low, only 8.8%. It was concluded that the students from the 4th years in almost all had the worst performance and the lowest adhesion to the hands-washing technique when compared to the students from the 2nd and 3rd years

Varicose veins is a condition, which affects numerous people. The condition is mostly not harmful but aesthetically unappreciated. Therefore many people choose to have them surgically removed. After the surgery is completed, the leg is bandaged, this for creating an ideal healing environment, without any complications occurring. It is important that a uniform pressure is distributed evenly along the bandaged leg, because high or low pressure can cause complications which prolongs healing. During the bandaging it is difficult to achieve an even pressure since the pressure varies due to the shape of the leg and who is bandaging the leg. PressCise has developed a compression bandage with a guide along the bandage, so that each bandaging will give the same pressure upon the leg. The bandage is designed after a specific mathematical formula that is derived from the law of Laplace. This means that no matter how thick or thin the leg is at different points, the pressure will distribute itself evenly over the entire bandaged leg. PressCise aims to obtain a CE-mark for the product before a launch. An analysis of demands and a wide test study therefor needs to be carried out. Demands and requirements for the product from different laws and regulations have been observed in order to determine which tests are necessary to execute. At this stage PressCise also needs to evaluate different parameters. To begin with, they need to see how the bandage behaves in different types of treatments, and secondly they need to evaluate the properties in order to give the correct information concerning usage and durability advices. In this report, a survey of the competitors was conducted in order to estimate which standards and tests the competitors are marketing their products with. An examination of the requirements of the product from the PressCise, CE marking and laws will be study, to see which demands and regulations lies upon the bandage. In this report a minor test study will be executed, where the product will go through a washing test, an abrasion test and a hysteresis test. The report will conclude with a requirement specification for the current product and its launching. / Program: Textilingenjörsutbildningen