Made available in DSpace on 2014-12-17T15:42:09Z (GMT). No. of bitstreams: 1 SolangeAQ_TESE.pdf: 2741616 bytes, checksum: ad21da6882b166123a02d610e3d096ef (MD5) Previous issue date: 2009-08-06 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / The nanostructured molecular sieve SBA-15 was synthesized by the hydrothermal method, and modified with lanthanum with Si/La molar ratios of 25, 50, 75 and 100. The materials were evaluated as catalysts for the cracking of n-hexane model reaction. Type SBA- 15 and LaSBA-15 mesoporous materials were synthesized using tetraetilortosilicato as a source of silica, hydrochloric acid, heptahydrate lanthanum chloride and distilled water. Pluronic P123 triblock. polymer was used as structure template. The syntheses were carried out by 72 hours. The obtained SBA-15 samples were previously analyzed by thermogravimetry, in order to check the conditions of calcination for removal of organic template. Then, the calcined materials were characterized by X-ray diffraction, infrared spectroscopy, adsorption and desorption of nitrogen, scanning electron microscopy and X-ray microanalysis by dispersive energy. The acidity of the samples was determined using adsorption of n-bulinamina and desorption followed by thermogravimetry. It was found that the hydrothermal synthesis method was suitable for the synthesis of the SBA-15 mesoporous materials, with an excellent degree of hexagonal ordering. The reactions of catalytic cracking of n-hexane were carried out using a fixed bed continuous flow microreactor, coupled on-line to a gas chromatograph. From the catalytic evaluation, it was observed that the mesoporous materials containing lanthanum showed different results for the reaction of cracking of nhexane compared to the unmodified mesoporous material SBA-15. As a result of cracking was obtained as main products hydrocarbons in the range of C1 to C5. The catalyst that showed better properties in relation to the acidity and catalytic activity was LaSBA-15 with the ratio Si/La = 50 / A peneira molecular nanoestruturada SBA-15 foi sintetizada pelo m?todo hidrot?rmico, e modificada com lant?nio com raz?es molares Si/La de 25, 50, 75 e 100. Os materiais obtidos foram avaliados como catalisador para a rea??o modelo de craqueamento de n-hexano. Os materiais mesoporosos tipo SBA-15 e LaSBA-15 foram sintetizados utilizando tetraetilortosilicato, como fonte de s?lica, ?cido clor?drico, cloreto de lant?nio heptahidratado e ?gua destilada. Como direcionador estrutural foi utilizado copol?mero tribloco Pluronic P123. As s?nteses foram realizadas durante 72 horas. As amostras de SBA-15 modificadas foram avaliadas por termogravimetria para verificar as condi??es de calcina??o para remo??o do direcionador org?nico. Ap?s a retirada do direcionador as amostras de SBA-15 modificadas com diversas raz?es Si/La (25, 50, 75 e 100) foram caracterizadas por an?lises por difra??o de raios-X, espectroscopia na regi?o do infravermelho, adsor??o e dessor??o de nitrog?nio, microscopia eletr?nica de varredura e microan?lise de raios X por energia dispersiva. A acidez das amostras foi determinada utilizando adsor??o de n-bulinamina seguido de dessor?ao por termogravimetria. Verificou-se que o m?todo de s?ntese hidrot?rmica foi adequado ? s?ntese dos materiais mesoporosos modificados com excelente grau de ordena??o hexagonal. As rea??es de craqueamento catal?tico do n-hexano foram realizadas em um microreator catal?tico de leito fixo com fluxo cont?nuo acoplado em linha com um cromat?grafo a g?s. A partir da avalia??o catal?tica, foi observado que os materiais mesoporosos contendo lant?nio foram mais ativos que o SBA-15, para a rea??o de craqueamento do n-hexano, obtendo-se como produto hidrocarbonetos na faixa de C1 a C5. O catalisador que apresentou melhores propriedades, em rela??o ? acidez e a atividade catal?tica foi o sintetizado com a raz?o Si/La=50

Neste trabalho realizou-se a síntese e caracterização de materiais contendo óxidos de lantanóides incorporados em sílica mesoporosa ordenada, os quais foram utilizados como catalisadores no processo de ozonização de compostos orgânicos poluentes. Empregando-se o método de impregnação úmida, realizou-se a incorporação de óxido de cério e óxido de lantânio no suporte mesoporoso, do tipo SBA-15. Utilizaram-se diferentes precursores dos óxidos metálicos, a fim de verificar a influência que a fonte do cátion metálico exerça tanto nas características estruturais, texturais e morfológicas dos materiais quanto na atividade catalítica. A caracterização destes materiais mostrou que em todas as amostras não houve colapso da estrutura ordenada de mesoporos da SBA-15. Porém nos materiais incorporados observou-se a diminuição da área superficial específica e o volume de poro, devido à presença do CeO2 ou do La2O3 tanto na superfície do suporte quanto no interior dos mesoporos. Também foi possível identificar as fases cristalinas destes óxidos após a etapa de incorporação. Os catalisadores foram empregados na degradação de um azocorante, Preto Remazol B. Para todos os materiais verificou-se que a ozonização catalítica heterogênea proporcionou o aumento da mineralização em relação ao processo de ozonólise. Para os catalisadores que continham CeO2, os melhores resultados de mineralização do azocorante foram obtidos para os catalisadores cujos precursores eram complexos metálicos. Para estes materiais obteve-se um incremento de 65% em comparação com a ozonólise, sem que houvesse um grande aumento no consumo de ozônio. Para os materiais que continham La2O3, o catalisador cujo precursor do óxido foi um dos sais inorgânicos utilizados (nitrato de lantânio hidratado) apresentou o melhor teor de mineralização, sendo 72% superior em relação à ozonólise, ao final de 60 minutos. Os catalisadores contendo óxido de cério incorporado à SBA-15 também foram empregados no processo de ozonização catalítica de mais duas espécies orgânicas de grande relevância ambiental: fenol e ácido salicílico. Para o primeiro, houve um incremento mínimo na remoção da matéria orgânica de 70%, para todos os catalisadores testados, em relação à ozonólise, após 60 minutos. Entretanto, apenas dois deles (SBA-Ce(Gly) e SBA-Ce(Cl)) apresentaram um consumo de ozônio semelhante à ozonólise, o que indica que estes eram os mais eficientes. Na degradação do ácido salicílico a sinergia entre o suporte mesoporoso ordenado de elevada área superficial com o óxido de cério mais uma vez mostrou-se eficiente na mineralização da espécie orgânica, sendo obtidos teores de mineralização superiores a 90% para a ozonização catalítica contra 60% para a ozonólise, ao final de 60 minutos de tratamento / The aim of this work was the synthesis and characterization of materials with lanthanide oxides incorporated in ordered mesoporous silica, which were used as catalysts on the ozonation of organic pollutants. The incorporation of cerium and lanthanum oxides on the mesoporous support, SBA-15 type, was made by wet impregnation method. Different metal oxides precursors were used in order to investigate the influence in structural, textural and morphological characteristics of the materials and in catalytic activity. No collapse in the ordered mesopores structure of SBA-15 was observed after lanthanide oxides incorporation. However the hybrid compounds presented lower specific surface area and pore volume. It was observed the presence of CeO2 and La2O3 in the external support surface and in the interior of the mesopores. It was also possible to identify crystalline phases of these oxides after the incorporation step. The catalysts were employed on the degradation of an azo dye, Remazol Black B. For all samples it was found that the heterogeneous catalytic ozonization provided an increase in the mineralization levels of this organic species compared with the results of the ozonolysis. For the CeO2-based materials, the best results were achieved for the catalysts whose precursors were the metal complexes. For these materials the mineralization of the Remazol Black B was, at least, 65% superior to ozonolysis alone, without a great increase in the consumption of ozone. For the La2O3-based materials, the best result was obtained for the catalyst which oxide precursor was one of the inorganic salt (lanthanum nitrate hydrate). The mineralization was 72% higher than the ozonolysis alone after 60 minutes of treatment. The catalysts containing cerium oxide incorporated into the SBA-15 were also employed in the catalytic ozonization of two other organic species of great environmental importance: phenol and salicylic acid. For the first, there was a minimal increase in the removal of the organic matter when compared with ozonolysis alone. However, only two of them (SBA-Ce(Gly) e SBA-Ce(Cl)) showed a consumption of ozone similar to ozonolysis, indicating that these were the most efficient. In salicylic acid degradation, the mineralization achieved was greater than 90% for the catalytic ozonation versus 60% for the ozonolysis alone, after 60 minutes of treatment

En France, les anciennes mines d'uranium et leurs eaux d'exhaure font l'objet d’une surveillance environnementale dû à la présence de stériles miniers qui peuvent modifier la chimie des eaux en augmentant leur concentration en uranium. Afin de pouvoir rejeter des eaux dans le milieu naturel dont les concentrations en U(VI) soient conformes aux normes, des stations de traitement ont été mises en place. Cependant, une future règlementation diminuera drastiquement la limite autorisée de rejet en uranium impliquant une révision des méthodes d'élimination de celui-ci. L'adsorption aqueuse est une méthode efficace et peu couteuse. Les matériaux à mésoporosité ordonnée présentent des propriétés d'adsorption intéressantes à cause de leurs propriétés texturales et leurs possibles fonctionnalisations. Plusieurs familles de matériaux mésoporeux (silices fonctionnalisées ou non, carbones, oxyde de magnésium) ont été synthétisées, caractérisées et utilisées pour adsorber U(VI). Des études en batch et en dynamique ont été réalisées à partir de solutions reconstituées et d'eaux d'exhaure issues du site de Bellezane (87) sur les différents matériaux choisis, et les mécanismes d'adsorption ont été étudiés en fonction de la spéciation aqueuse de l'uranium et de la présence d'ions compétiteurs. Les résultats ont montré que la SBA-15 greffée avec des fonctions aminopropyles, présentait les meilleures capacités d'adsorption à pH 6. Il a été montré que l'U(VI) s'adsorbait par formation de complexe de sphère interne dans la mésoporosité du matériau, et que la présence de complexes entre l'U(VI) et les carbonates dissous diminuait significativement la capacité d'adsorption du matériau en U(VI). / In France, former uranium mines and their draining effluents are kept under environmental monitoring due to the presence of mine tailings which can modify the chemistry of surface waters and increase their uranium concentration. In order to decrease the U(VI) concentration to the one set by the standards, water treatment facilities are used. However, an incoming regulation will drastically decrease the allowed U(VI) concentration in the released water, implying the changing of the current U(VI) removal methods. Aqueous adsorption is known to be an efficient and non expensive method. Ordered mesoporous materials have interesting adsorption properties due to their textural properties and their ability to be functionalized. Different types of mesoporous materials (functionalized or non functionalized silica, carbon, magnesium oxide) were synthesized, characterized, and experimented as U(VI) adsorbents. Studies made in batch and dynamic modes were achieved from reconstituted solutions and mine-water from the Bellezane's site (87), on the different materials, and adsorption mechanisms were studied in function of the aqueous uranium speciation and the presence of competitive ions. Results show that aminopropyl grafted SBA-15 displays the best adsorption capacities at pH 6. It is also shown that U(VI) adsorption proceeds through the formation of inner-sphere complex inside of the mesoporosity of the material, and that the presence of complexes involving U(VI) and dissolved carbonates significantly decrease the adsorption capacity of the material toward U(VI).

Submitted by Automa??o e Estat?stica (sst@bczm.ufrn.br) on 2017-06-13T19:56:34Z No. of bitstreams: 1 LarissaCiciannyLuzFerreiraDeAraujo_TESE.pdf: 3361603 bytes, checksum: 8da0327f1fa708d7b02bec63cf53a5f0 (MD5) / Approved for entry into archive by Arlan Eloi Leite Silva (eloihistoriador@yahoo.com.br) on 2017-06-19T11:40:01Z (GMT) No. of bitstreams: 1 LarissaCiciannyLuzFerreiraDeAraujo_TESE.pdf: 3361603 bytes, checksum: 8da0327f1fa708d7b02bec63cf53a5f0 (MD5) / Made available in DSpace on 2017-06-19T11:40:01Z (GMT). No. of bitstreams: 1 LarissaCiciannyLuzFerreiraDeAraujo_TESE.pdf: 3361603 bytes, checksum: 8da0327f1fa708d7b02bec63cf53a5f0 (MD5) Previous issue date: 2016-08-26 / Os nanomateriais (catalisadores) mesoporosos e microporosos s?o considerados promissores para obten??o de derivados leves a partir de fra??es pesadas do petr?leo e como adsorventes para prote??o ambiental. Este trabalho reportou a sintetize pelo m?todo hidrot?rmico, e caracteriza??o de catalisadores heterog?neos mesoporosos, do tipo SBA-15, com adi??o dos metais c?rio e alum?nio, avaliando sua atividade e seletividade na degrada??o t?rmica de ?leo pesado. As amostras dos materiais nanoestruturados foram caracterizadas por an?lise termogravim?trica (TG/DTG), difra??o de raios X (DRX), microscopia eletr?nica de varredura (MEV), espectroscopia de fluoresc?ncia de raios X (FRX), espectroscopia de absor??o na regi?o do infravermelho com transformada de Fourier (FTIR) e adsor??o de nitrog?nio (BET). A caracteriza??o mostrou que os materiais sintetizados resultaram em um catalisador nanoestruturado, ordenado e com di?metro de poros e ?rea superficial de acordo com a literatura existente. Com o intuito de verificar a atividade catal?tica dos mesmos, utilizou-se uma amostra de petr?leo pesado (?API=14), fornecido pela Petrobras, realizando-se atrav?s da termogravimetria o processo de degrada??o t?rmica e catal?tica do ?leo. Mediante as curvas termogravim?tricas obtidas, observou-se uma redu??o na temperatura de in?cio do processo de decomposi??o catal?tica do petr?leo. Atrav?s do modelo cin?tico n?o isot?rmico de Ozawa Flynn Wall (OFW) obtiveram-se alguns par?metros para determina??o da energia de ativa??o aparente das decomposi??es. Os resultados obtidos das difra??es de raio X mostraram atrav?s de picos caracter?sticos que a estrutura hexagonal foi formada, verificando que a melhor raz?o foi Si/Ce = 5 devido a sua intensidade em alto ?ngulo. Os espectros de infravermelho apresentaram absor??es caracter?sticas de materiais da fam?lia SBA-15. Da adsor??o de nitrog?nio, obtendo-se par?metros compat?veis aos encontrados na literatura, que lhes conferem serem promissores na ?rea da degrada??o de petr?leo, devido aos seus mesoporos facilitarem o acesso de grandes mol?culas. O di?metro m?dio dos poros variou significativamente com a incorpora??o do alum?nio e do c?rio. A espessuras de parede (Wt) ficou na faixa de 2,96 a 4,07 nm, observando assim um aumento deste par?metro que deve-se a incorpora??o dos metais na parede, indicando que a incorpora??o do c?rio, n?o bloqueou os mesoporos. O acr?scimo de alum?nio reduziu a area superficial (SBET) de 893 para 763 m2g-1, no entanto com o acr?scimo do c?rio com o alum?nio esta ?rea aumentou para 826 m2g-1. Para o petr?leo a temperatura inicial e final de perda de massa; apresentando apenas dois eventos devido ao teor de enxofre mercapt?dico, o qual influencia no surgimento do terceiro evento, j? que esse teor ? medido pela quantidade de enxofre nos an?is arom?ticos (HC pesados). A mistura do Petr?leo + 12% de Ce5Al50SBA-15 evidenciando a atividade catal?tica deste material. / Nanomaterials (catalysts) are microporous and mesoporous considered promising for obtaining light oil products from heavy oil fractions and adsorbents for environmental protection. This paper reported the synthesizes by hydrothermal method, and characterization of mesoporous heterogeneous catalysts, the SBA-15 type with addition of metals cerium and aluminum, evaluating their activity and selectivity in the thermal degradation of heavy oil. Samples of nanostructured materials were characterized by thermal gravimetric analysis (TG / DTG), X-ray diffraction (XRD), scanning electron microscopy (SEM), ray fluorescence spectroscopy X (XRF) spectroscopy, absorption in the infrared region Fourier transform (FTIR) and nitrogen adsorption (BET). The characterization showed that the synthesized materials resulted in a nanostructured catalyst and ordered pore diameter and surface area according to the literature. In order to check the catalytic activity of the same, we used a heavy oil sample (?API = 14), supplied by Petrobras, is performing through thermogravimetry the process of thermal and catalytic degradation of the oil. Through the thermogravimetric curves, it was observed a reduction in the opening of oil decomposition catalytic process temperature. Through non isothermal kinetic model Ozawa Flynn Wall (OFW) gave some parameters to determine the apparent activation energy of decomposition. Obtaining as results of X-ray diffraction showed through characteristic peaks that the hexagonal structure was formed, noting that the best reason was Si / Ce = 5 because of its intensity at a high angle. The infrared spectra showed absorptions family material characteristics SBA-15. The nitrogen adsorption, obtaining parameters compatible with those found in the literature which confer them to be promising in the field of oil degradation due to their mesopores facilitate access of large molecules. The average pore diameter varied significantly with the incorporation of aluminum and cerium. The wall thickness (Wt) was in the range from 2.96 to 4.07 nm, thus observing an increase in this parameter which is due to incorporation of the metals into the wall, indicating that the incorporation of cerium, did not block the mesopores. The addition of aluminum reduced the surface area (SBET) of 893 to 763 m2 g-1, however with the addition of cerium with aluminum this area increased to 826 m2 g-1. For the oil temperature and the initial end of weight loss; presenting only two events due to mercapt?dico sulfur, which influences the appearance of the third event, since that content is measured by the amount of sulfur in aromatic rings (heavy HC). The mixture of oil + 12% of Ce5Al50SBA-15 showing the catalytic activity of this material.

Embora já tenha sido comprovada a ação adjuvante da SBA-15, pouco se sabe sobre o seu mecanismo molecular que leva a modulação positiva da resposta imunológica. Foi avaliada a ativação do inflamassoma NLRP3, sobre estímulos de SBA-15, em macrófagos de camundongos C57BL/6. Como parâmetro dessa ativação, foi analisada a produção de IL-1β por ELISA. A SBA-15 foi capaz de induzir a produção de IL-1β a níveis semelhantes quando comparado com um agonista de NLRP3 (Nano-SiO2), sugerindo a ativação do inflamassoma. Para avaliar o envolvimento da caspase-1, nos resultados obtidos com a SBA-15, os macrófagos foram estimulados com sílica na presença do inibidor de caspase-1, e como esperado, a produção de IL-1β foi restaurada para o seu nível basal. A ativação do inflamassoma, por estímulos da SBA-15, parece ser parcialmente dependente da fagocitose e da produção das espécies reativas do oxigênio. Além disso, foi visto que a SBA-15 não induz a produção de IL-6, confirmando que essa sílica está envolvida na via do inflamassoma e não em outras vias, como por exemplo, NF-κB. / Although it has already been proven adjuvant action of SBA-15, little is known about its molecular mechanism leading to positive modulation of the immune response. NLRP3 inflammasome activation was evaluated on SBA-15 stimulation in C57BL/6 mice macrophages. As this parameter activation, it analyzed the production of IL-1β by ELISA. The SBA-15 was able to induce the production of IL-1β at levels similar when compared to an agonist of NLRP3 (Nano-SiO2), suggesting the activation of the inflammasome. To assess the involvement of caspase-1, the results obtained with SBA-15, the macrophages were stimulated with silica in the presence of caspase-1 inhibitor, and as expected, IL-1β production was restored to its baseline level. Activation of the inflammasome, by stimuli of SBA-15, appears to be partly dependent on phagocytosis and production of reactive oxygen species. In addition, it was seen that the SBA-15 does not induce IL-6 production, confirming that silica is involved inflammasome the path of and not in other ways, eg, NF-κB.

Neste trabalho realizou-se a síntese e caracterização de materiais contendo óxidos de lantanóides incorporados em sílica mesoporosa ordenada, os quais foram utilizados como catalisadores no processo de ozonização de compostos orgânicos poluentes. Empregando-se o método de impregnação úmida, realizou-se a incorporação de óxido de cério e óxido de lantânio no suporte mesoporoso, do tipo SBA-15. Utilizaram-se diferentes precursores dos óxidos metálicos, a fim de verificar a influência que a fonte do cátion metálico exerça tanto nas características estruturais, texturais e morfológicas dos materiais quanto na atividade catalítica. A caracterização destes materiais mostrou que em todas as amostras não houve colapso da estrutura ordenada de mesoporos da SBA-15. Porém nos materiais incorporados observou-se a diminuição da área superficial específica e o volume de poro, devido à presença do CeO2 ou do La2O3 tanto na superfície do suporte quanto no interior dos mesoporos. Também foi possível identificar as fases cristalinas destes óxidos após a etapa de incorporação. Os catalisadores foram empregados na degradação de um azocorante, Preto Remazol B. Para todos os materiais verificou-se que a ozonização catalítica heterogênea proporcionou o aumento da mineralização em relação ao processo de ozonólise. Para os catalisadores que continham CeO2, os melhores resultados de mineralização do azocorante foram obtidos para os catalisadores cujos precursores eram complexos metálicos. Para estes materiais obteve-se um incremento de 65% em comparação com a ozonólise, sem que houvesse um grande aumento no consumo de ozônio. Para os materiais que continham La2O3, o catalisador cujo precursor do óxido foi um dos sais inorgânicos utilizados (nitrato de lantânio hidratado) apresentou o melhor teor de mineralização, sendo 72% superior em relação à ozonólise, ao final de 60 minutos. Os catalisadores contendo óxido de cério incorporado à SBA-15 também foram empregados no processo de ozonização catalítica de mais duas espécies orgânicas de grande relevância ambiental: fenol e ácido salicílico. Para o primeiro, houve um incremento mínimo na remoção da matéria orgânica de 70%, para todos os catalisadores testados, em relação à ozonólise, após 60 minutos. Entretanto, apenas dois deles (SBA-Ce(Gly) e SBA-Ce(Cl)) apresentaram um consumo de ozônio semelhante à ozonólise, o que indica que estes eram os mais eficientes. Na degradação do ácido salicílico a sinergia entre o suporte mesoporoso ordenado de elevada área superficial com o óxido de cério mais uma vez mostrou-se eficiente na mineralização da espécie orgânica, sendo obtidos teores de mineralização superiores a 90% para a ozonização catalítica contra 60% para a ozonólise, ao final de 60 minutos de tratamento / The aim of this work was the synthesis and characterization of materials with lanthanide oxides incorporated in ordered mesoporous silica, which were used as catalysts on the ozonation of organic pollutants. The incorporation of cerium and lanthanum oxides on the mesoporous support, SBA-15 type, was made by wet impregnation method. Different metal oxides precursors were used in order to investigate the influence in structural, textural and morphological characteristics of the materials and in catalytic activity. No collapse in the ordered mesopores structure of SBA-15 was observed after lanthanide oxides incorporation. However the hybrid compounds presented lower specific surface area and pore volume. It was observed the presence of CeO2 and La2O3 in the external support surface and in the interior of the mesopores. It was also possible to identify crystalline phases of these oxides after the incorporation step. The catalysts were employed on the degradation of an azo dye, Remazol Black B. For all samples it was found that the heterogeneous catalytic ozonization provided an increase in the mineralization levels of this organic species compared with the results of the ozonolysis. For the CeO2-based materials, the best results were achieved for the catalysts whose precursors were the metal complexes. For these materials the mineralization of the Remazol Black B was, at least, 65% superior to ozonolysis alone, without a great increase in the consumption of ozone. For the La2O3-based materials, the best result was obtained for the catalyst which oxide precursor was one of the inorganic salt (lanthanum nitrate hydrate). The mineralization was 72% higher than the ozonolysis alone after 60 minutes of treatment. The catalysts containing cerium oxide incorporated into the SBA-15 were also employed in the catalytic ozonization of two other organic species of great environmental importance: phenol and salicylic acid. For the first, there was a minimal increase in the removal of the organic matter when compared with ozonolysis alone. However, only two of them (SBA-Ce(Gly) e SBA-Ce(Cl)) showed a consumption of ozone similar to ozonolysis, indicating that these were the most efficient. In salicylic acid degradation, the mineralization achieved was greater than 90% for the catalytic ozonation versus 60% for the ozonolysis alone, after 60 minutes of treatment

A sílica SBA-15 devido às suas propriedades físico-química e estrutural tem demonstrado efeito adjuvante, carreando, protegendo e liberando antígenos. Nesse estudo avaliou-se o seu efeito sobre a atividade fagocítica de macrófagos; no recrutamento de células para órgãos linfóides; na expressão de moléculas MHC de classe II e co-estimuladoras pelas APCs; e a influência do tempo de contato imunógeno:SBA15 no potencial de adsorção e geração de anticorpos. Experimentos in vitro evidenciam que diferentes concentrações da SBA-15 não afetam a morfologia ou atividade de macrófagos. A SBA15 induz o recrutamento de macrófagos, células dendríticas, CD4+, CD8+ e B220+ para os linfonodos drenantes, promovendo aumento de expressão de moléculas co-estimuladoras. As análises da produção de anticorpos demonstram que o contato imunógeno:sílica é importante na adsorção e melhora da resposta imune. Esses resultados sugerem que o potencial adjuvante da SBA-15 relaciona-se com a capacidade de adsorver antígenos e liberá-los às APCs, influindo diretamente na reposta imunológica. / The SBA-15 silica is a polymer that due to its physico-chemical and structural properties has shown adjuvant effect, carrying, protecting and delivering antigens. In this study was evaluated the effect of SBA15 in the phagocytic activity of macrophages; recruitment of cells to lymphoid organs; expression of MHC class II and co-stimulatory molecules by the APCs, and the influence of contact time between immunogen:SBA-15 in potential for absorption and generation of antibodies. In vitro experiments showed that different concentrations of SBA-15 do not affect the morphology or macrophage activity. SBA-15 induces the recruitment of macrophages, dendritic cells, CD4+, CD8+ and B220+ to the draining lymph nodes, increasing the expression of co-stimulatory molecules. Analyses of antibody production showed that the contact immunogen:silica is important for adsorption and improves the immune response. These results suggest that the adjuvanticity of SBA-15 is related to its ability in antigens adsorption and release to APCs, directly influencing the immune response.

De nouveaux précurseurs borates-triéthoxysilanes comprenant le closo-decahydrodecaborate ont été préparés et immobilisés dans la silice. L'introduction des groupements trialkoxysilyles sur les clusters (NH4)2B10H10, a été réalisée par condensations électrophiles faisant appel à des réactifs nucléophiles dans des conditions douces, tout en épargnant l'utilisation d'électrophiles ou de catalyseurs coûteux. Les borates-trialkoxysilanes obtenus ont été caractérisés par RMN 1H, 13C, 11B, 29Si, 31P, IRTF, analyse élémentaire et spectroscopie de masse. Comme preuve de concept, ces précurseurs ont été incorporés de manière covalente dans les pores d'une silice mésoporeuse, SBA-15. Tous les matériaux hybrides mésoporeux et modifiés avec du borate-triéthoxysilane ont été caractérisés par RMN solide 11B et 29Si, DRX, MET, les analyses élémentaires et étude de l'adsorption d'azote (méthode BET). Les précurseurs silylés-borate ont été combinés avec des nanoparticules de silice pour une utilisation éventuelle dans BNCT, où des NPs d'environ 100 nm ont été synthétisées comprenant deux types de centres luminescents différents. FITC silylé (isothiocyanate de fluorescéine) et complexe Eu (III) silylé ont été respectivement immobilisés dans des nanoparticules de silice par le procédé sol-gel. Les deux types de nanoparticules luminescentes ont été fonctionnalisés par les groupes silylés-borates et caractérisés par RMN du solide 11B, 31P et 29Si, DLS, MET, analyses élémentaires, d'adsorption d'azote et spectrophotométrie. / New borate-triethoxysilane precursors comprising the closo-decahydrodecaborate cluster were prepared and immobolized into hybrid silica materials. The synthesis of silylated clusters starting from (NH4)2B10H10 and silane precursors R-Si(OEt)3 through Electrophilic Induced Nucleophilic Reactions was performed under mild conditions, the silylated clusters were analyzed by 1H, 13C, 11B, 29Si, 31P NMR, IR, elemental analyses and mass spectroscopy ES-ESI. As a proof of concept, the borate-triethoxysilane precursors were covalently incorporated into the pores of mesoporous silica, SBA-15 type. All mesoporous materials modified with borate-triethoxysilane were characterized by 11B and 29Si solid state NMR, XRD, TEM, elemental analyses and Nitrogen sorption studies. The silylated-borate precursors were combined with dye-doped silica nanoparticles for possible future use in BNCT technique, where ~100 nm nanoparticles were synthesized comprising two different types of luminescent centers. Silylated FITC (fluorescein isothiocyanate) and silylated Eu(III) complexes were embedded into silica nanoparticles through sol-gel process. Both types of luminescent nanoparticles were functionalized with the silylated-borate clusters and characterized by 11B, 31P and 29Si solid state NMR, DLS, TEM, elemental analyses, Nitrogen sorption studies and spectrophotometer.

L'objectif de ce projet de thèse a été d’étudier l’activité catalytique de catalyseurs commerciaux contenant de nanoparticules métalliques pour l'hydrogénation du limonène. La réaction a été réalisée en l'absence de solvants et dans des conditions douces c’est à dire à basse température (30°C) et sous faible pression d'hydrogène (3 bar), conduisant à une production stable du (+)-p-1-menthene. Dans notre étude, les nanoparticules métalliques actives (Pt, Pd et Ru) et les supports (carbone, silice et alumine) ont été systématiquement modifiés et testés dans des conditions de réaction modérées (température ambiante, 3 bar H2). Notre étude a révélé une activité et sélectivité importante du catalyseur hétérogène Pt/C pour la réduction du R-(+)-limonène en (+)-p-1-menthène qui est le produit partiellement hydrogéné. Le Pt/C ainsi que Pt/Al2O3 est l’un des systèmes les plus actifs parmi les catalyseurs actuellement disponibles dans le commerce. De plus, l'activité catalytique et la stabilité de Pt/C ont été maintenues au cours des essais de recyclage en réacteur fermé. Ce catalyseur a également été utilisé en réacteur à flux continu, donnant des résultats prometteurs. L'hydrogénation sélective de la liaison C=C terminale du limonène par rapport de la liaison interne a été rationalisée par des études cinétiques détaillées qui révèlent une vitesse 8 fois plus importante par la double liaison terminale. Cette première étude nous a permis de développer la synthèse de nouveaux catalyseurs hétérogènes contenant diverses nanoparticules métalliques (Pt, Ru, Pt3Sn et Ni). Ils ont été préparés à partir d'une approche colloïdale et ont été testés dans l'hydrogénation de limonène. Ces catalyseurs contiennent la même charge métallique et des tailles de particules similaires (environ 2 nm) dispersées de façon homogène sur des oxydes non structurés (silice et d'alumine), du carbone, ou incorporés à l'intérieur des murs ou à la surface des pores de matériaux mésostructurés siliciques (SBA-15). L’ensemble des catalyseurs de la série du Pt ont révélés une activité accrue lors de l'hydrogénation sélective du limonène en p-menthène puis en p-menthane avec une vitesse de réaction très élevé. Parmi tous ces catalyseurs, celui contenant des nanoparticules de Pt dans les murs de la silice a montré au bout de deux heures de réaction un TOF d'environ 2200 h-1 et un rendement maximal pour le p-menthène d'environ 85% après 10 heures de réaction. Ce même catalyseur a été testé dans un réacteur en flux continu et affiche après 6 heures un rendement en p-menthene stable de 80%. Aucun produit d'isomérisation n’a été détecté dans le mélange brut au cours de la réaction. En conclusion, nous pouvons dire que l'utilisation d'un catalyseur hétérogène commercial comme le Pt/C ou l’utilisation d’un catalyseur hétérogène métallique développé à partir d'une approche colloïdale, Pt@SBA-15{murs}, permet d'obtenir une conversion sélective du limonène en p-menthène en réacteur fermé ainsi également en réacteur à flux continu. Des informations sur la cinétique de cette réaction ont également pu être obtenues / The goal of this PhD project was in an early stage to study the activities of several commercial metal nanoparticles based catalysts for the mild hydrogenation of limonene. The hydrogenation of limonene has been performed in neat limonene and under mild conditions, e.g. low temperature (30°C) and low molecular hydrogen pressure (3 bar), aiming at a sustainable production route for (+)-p-1-menthene. In our study, the active metal nanoparticles (Pt, Pd and Ru) and supports (carbon, silica and alumina) were systematically varied and tested. It was found that the heterogeneous catalyst Pt/C alongside Pt/Al2O3 under mild reaction conditions (room temperature and 3 bar H2) was highly active and selective in the reduction of R-(+)-limonene to the partial hydrogenation product (+)-p-1-menthene. Moreover, the catalytic activity and stability of Pt/C were maintained during recycling tests under batch conditions and thus allowed the implementation of this catalytic system into continuous flow operation. The selective hydrogenation of terminal C=C bond over the internal one in limonene was rationalized by detailed kinetic studies which revealed an 8-fold difference in reaction rate between the two reactions. This previous study with commercial catalysts gave the possibility to tune the synthesis of heterogeneous metal-based catalysts for the next step of the study, where different heterogeneous metal based catalysts (Pt, Ru, Pt3Sn, and Ni), developed from a colloidal-based approach were tested in the hydrogenation of limonene. Those catalysts contain the same metal loading and similar particle sizes (ca. 2 nm) homogeneously dispersed onto non structured oxides (silica and alumina), carbon, or embedded into the walls or at the pore surface of a mesostructured silica materials (SBA-15). All the catalysts from the Pt series were particularly active in the selective hydrogenation of limonene towards p-menthene with further conversion into p-menthane, showing a very high reaction rate. Among of all those catalysts, the one containing Pt nanoparticles embedded in the walls of the silica showed the highest TOF, of ca. 2200 h-1 after two hours of reaction and a maximum yield in p-menthene of ca. 85 % was obtained after 10 hours of reaction. The same catalyst was tested in a continuous flow system and a stable yield of ca. 80% during 6 hours of reaction was reached. No products of isomerization were detected in the crude mixture during the reaction. We could therefore conclude that, using either a heterogeneous commercial catalyst like Pt/C or using a heterogeneous metal based catalyst developed from a colloidal-based approach like SBA-15{walls}, it was possible to achieve a selective conversion of limonene into p-menthene in batch and in continuous flow conditions

Para atestar a imunogenicidade de vacinas contra raiva, os testes de titulação e de soroneutralização de vírus rábico em células BHK-21 foram validados quanto à linearidade, precisão, exatidão e robustez. Cinco esquemas de imunização com diferentes concentrações, vias de inoculação e intervalos entre as doses foram avaliados em camundongos com vacina contra raiva em células Vero. O grupo II que recebeu um esquema de 2 doses e intervalos maiores (0 e 60 dias) apresentou títulos de anticorpos neutralizantes [ACN] mais elevados (46,1 UI/mL) do que o Grupo I (19,4 UI/mL), de 3 doses e intervalos menores (0,7 e 28 dias). O grupo III, que recebeu 2 doses, sendo a 1ª diluída 1/10, apresentou ACN semelhantes ao grupo II (39,2 UI/mL), sendo igualmente eficaz. Nenhum animal do grupo IV, imunizado por via oral (VO) apresentou ACN, indicando supressão e todos os do grupo V, imunizados VO com antígeno adsorvido/encapsulado em sílica nanoestruturada SBA-15, apresentaram títulos de ACN detectáveis, mostrando que o antígeno foi protegido da degradação no trato gastrointestinal. / To assure the reliability of the results of immunogenicity of rabies vaccines, tests of virus titration and neutralization in BHK-21 cells were validated for linearity, precision, accuracy and robustness. Five schemes of immunization with different concentrations, routes of inoculation and intervals between doses were evaluated in mice with rabies vaccine in Vero cells. Group II, immunized with 2 doses and enlarged interval (0 and 60 days) presented higher levels of neutralizing antibody (NAs) (46,1 IU/mL) than group I (19,4 IU/mL), with 3 doses and shorter intervals (0,7 and 28 days). Group III, which received 2 doses, the 1st diluted to 1/10, presented results similar to group II (39,2 IU/mL). None mouse of Group IV, immunized by oral route, presented NAs, indicating suppression and all mice of group V, immunized by oral route with vaccine adsorbed/encapsulated in nanostructured SBA-15 silica presented detectable NAs titers, showing that the SBA-15 silica prevented the antigen degradation in the gastrointestinal tract.