191 |
[en] NOBODY CARES FOR POLICE OFFICERS: THE DISCOURSE OF THE POLICE OFFICERS OF A PACIFYING POLICE UNIT AND ITS RHETORICAL RESOURCES / [pt] NINGUÉM GOSTA DE POLICIAL: O DISCURSO DE POLICIAIS DE UMA UNIDADE DE POLÍCIA PACIFICADORA E SEUS RECURSOS RETÓRICOSAMANDA DINUCCI ALMEIDA B VELASCO 13 April 2015 (has links)
[pt] A presente dissertação investiga o modo como policiais de uma Unidade de Polícia Pacificadora (UPP) do Rio de Janeiro percebem sua prática profissional e os riscos e relações que modelam e são modelados por essa prática na comunidade. Com base na análise de recursos retóricos utilizados na fala dos policiais em cinco entrevistas de pesquisa, buscou-se contribuir para o entendimento desse novo modelo de policiamento em um contexto que apresenta demandas específicas recentemente organizadas. Buscou-se também trazer contribuições para uma reflexão crítica sobre os cursos de formação desses policiais. Os resultados apontam que os policiais da nova geração se posicionam em contraste com os policiais de rua e os policiais mais antigos, em função do maior grau de risco de suas atividades e do maior grau de efetividade no serviço ao cidadão. Por outro lado, apontam também para fatores que dificultam o sucesso do modelo, como a falta de apoio da comunidade, de reconhecimento de seus superiores, do Estado, da Polícia Civil e da sociedade como um todo. / [en] This dissertation investigates how police officers from a Unidade de Polícia Paificadora, Pacifying Police Unit, perceive their professional practice and the risks and relationships that shape and are shaped by this community practice. Based on the analysis of rhetorical discourse seen in five research interviews, the goal was to contribute to the understanding of this new law enforcement model in a context that presents specific demands that were just recently organized. An effort was made to bring contributions to critical thinking about the training courses that these professionals attend. Results show that the new generation of police officers contrast to street policing and more experienced police work force. It is this way because there is a higher risk of activities and a greater level of effectiveness in serving citizens. On the other hand it also shows the factors that will make the success of the model more difficult, such as: lack of community support, acknowledgement from their superiors, the State, Civil Police and society as a whole.
|
192 |
[en] PERCEPTUAL MAPPING OF HOTELS IN RIO DE JANEIRO: A COMPOSITIONAL APPROACH / [pt] MAPA DE PERCEPÇÃO DE HOTÉIS NO RIO DE JANEIRO: UMA ABORDAGEM COMPOSITIVADEBORAH COUTINHO GIL NUNES 17 April 2015 (has links)
[pt] A indústria hoteleira vem se desenvolvendo significativamente nos últimos
anos impulsionada por grandes investimentos privados e do governo no setor de
turismo e infraestrutura. Inteiramente vinculada à demanda turística e inserida no
setor de serviços, a indústria apresenta um composto variável de bens e serviços,
que requer o entendimento das necessidades e dos desejos de seus clientes para
adotar as estratégias adequadas. Tal mercado é particularmente sensível à
qualidade dos serviços prestados e produtos oferecidos aos hóspedes. A satisfação
do consumidor é, portanto, um dos principais objetivos do setor, que busca criar
valor para os seus clientes ao antecipar e gerenciar suas expectativas, sejam elas
no segmento de turismo de lazer, sejam no segmento de turismo de negócios.
Nesta pesquisa alguns atributos apontados como essenciais aos serviços de
hotelaria foram utilizados com o objetivo de entender como o mercado percebe
um conjunto de hotéis localizados na cidade do Rio de Janeiro. Para tanto, foi
realizado um estudo em que se empregou análise de correspondência para
desenhar o mapa de percepções relativo a um conjunto pré-definido de atributos e
hotéis. O mapa bidimensional indica prevalência dos atributos área de lazer e
valor para a dimensão I e de um conjunto de atributos mais voltados para o
segmento de negócios no caso da dimensão II, onde localização e restaurante são
destaques positivos e qualidade do quarto e limpeza têm relevo negativo. O Othon
Palace enfatiza os dois segmentos (as duas dimensões). O hotel Pestana Rio
Atlântica prioriza o turismo lazer, enquanto que os outros oito hotéis pesquisados
estão mais concentrados em torno da origem (coordenadas normalizadas com
valor absoluto inferior a 0,4), o que caracteriza um posicionamento estratégico
ambíguo, buscando privilegiar tanto o turismo de negócios quanto o de lazer. / [en] The hotel industry has been developing significantly in the last years, driven
by large public and private investments in the tourism and infrastructure sectors.
Said industry is entirely related to the demand of tourism activity and is inserted
in the service sector. Additionally, it is made up of a variable of good and
services, which requires the understanding of the needs and wants of its clients in
order to adopt the adequate strategies. Such a market is particularly sensitive to
the quality of services rendered as well as to products offered to guests. Therefore,
customer satisfaction is one of the main objectives of the sector that strives to
create value for its clients by anticipating and managing their expectations, be
them in the leisure or business tourism segments. In this research some attributes
considered to be essential to the services of the hotel industry were used with the
purpose of understanding how the market perceives a group of hotels located in
the City of Rio de Janeiro. To this effect, a study was done in which
correspondence analysis was implemented to conceptualize the perceptions map
concerning a group of predefined attributes and hotels. The bi-dimensional map
indicates mostly leisure attributes and value to the Dimension I and a group of
attributes pertaining to the business segment in the Dimension II, where location
and restaurant stand out as positive factors and room quality and cleanliness have
a negative relevance. Othon Palace hotel emphasizes the two segments (the two
dimensions). Pestana Rio Atlântica hotel prioritizes leisure tourism, while the
other eight hotels that were analyzed are more concentrated due to their origin
(normalized coordinates with an absolute value inferior to 0.4), which
characterizes an ambiguous strategic positioning, striving to excel both in leisure
and business tourism.
|
193 |
[en] 2D AND 3D STABILITY OF HIGH SLOPES IN AN OPEN PIT MINE / [pt] ESTABILIDADE 2D E 3D DE TALUDES DE GRANDE ALTURA EM MINA A CÉU ABERTOJORGE GOMEZ SOTO 14 August 2019 (has links)
[pt] Esta dissertação tem como objetivo principal estudar um caso real do comportamento de taludes de grande altura em um projeto de mineração situado no Peru, em termos de deslocamentos e fatores de segurança, considerando uma escavação com uma profundidade que se aproxima de 900 m. As análises tensão x deformação foram executadas pelo método dos elementos finitos, em modelos bi e tridimensionais, considerando o modelo constitutivo de Mohr-Coulomb para os seis diferentes tipos de rocha encontrados na área do projeto. Também foram investigados os efeitos da geometria 3D em análises pseudo-estáticas, tendo em vista a mineração estar situada em região de atividade sísmica, bem como a distância da pilha de material estéril em relação à borda da escavação. De modo geral observou-se que os deslocamentos horizontais e o fator de segurança estático são maiores em analises 3D, enquanto que os deslocamentos verticais resultaram superiores nas análises 2D. Os efeitos da pilha de estéril nos valores do fator de segurança foram pouco significativos, mas a configuração da superfície potencial de ruptura varia de acordo com a distância da pilha à escavação. O fator de segurança pseudo-estático em análises 3D depende da orientação considerada para a força pseudo-estática horizontal. / [en] The main objective of this thesis is to investigate the mechanical behavior of rock slopes of great height in a mining project located in Peru, in terms of displacements and safety factors, considering that the excavation has almost reached the depth of 900m. The stress – strain analyses were carried out by the finite element method considering bi and three-dimensional models and the Mohr-Coulomb constitutive model for the six different types of rock found in the area of the project. The 3D geometrical effects on pseudo-static analyzes were also investigated, since the mine is situated in a region of seismic activity, as well as the influence of the distance of the waste material from the edge of the excavation. In general, it was observed that the horizontal displacements and the static safety factor are larger in 3D analysis while the vertical displacements were superior in 2D models. The effects of the waste dump on the values of the safety factor were insignificant, but the configuration of the potential failure surface varied according to its distance from the excavation. The pseudo-static safety factor in 3D analysis depends on the orientation considered for the horizontal pseudo-static force.
|
194 |
[en] STRATEGY ANALYSIS OF THE AUTOMOBILE INDUSTRY / [pt] ANÁLISE DAS ESTRATÉGIAS COMPETITIVAS NA INDÚSTRIA AUTOMOBILÍSTICAFABIO VELOSO VICENTE DA SILVA 13 July 2007 (has links)
[pt] Este trabalho teve como principal objetivo o estudo da
indústria automobilística
brasileira, relacionando o posicionamento estratégico
competitivo das empresas com a
formação de grupos estratégicos e o desempenho dos mesmos.
O período estudado
compreende os anos de 2001 a 2006, a amostra foi formada
por 20 empresas ligadas à
Abeiva - Associação Brasileira de Importadores Veículos
Automotores - e à Anfavea -
Associação Nacional dos Fabricantes de Veículos
Automotores, e a análise foi baseada na
tipologia de Porter. Os resultados demonstraram que
empresas que apresentam melhores
desempenhos são as que optaram por uma das estratégias
genéricas propostas por Porter,
no caso a de Diferenciação; as empresas que obtiveram os
piores resultados foram as que
não apresentaram estratégia definida (stuck-in-the-middle). / [en] This research aims to study the Brazilian automobile
industry, relating the strategic
positioning of the companies with the formation of
strategic groups and their
performances. The studied period started in 2001 and ended
in 2006 and the sample was
formed by 20 associated companies from Abeiva - the
Brazilian Importers Association of
Automotive Vehicles and the Anfavea - the National
Association of Automotive Vehicles.
The study was based on the Porter`s typology and the
findings showed that the best
performances companies are those that applied the generic
strategy of Differentiation,
moreover, the companies who had gotten the worse result
had been the ones who had not
presented a well-defined strategy (stuck-in-the-middle).
|
195 |
[en] GEOMETRIC AND NUMERICAL ADAPTATIVITY OF 2D AND 3D FINITE ELEMENT MESHES / [pt] ADAPTATIVIDADE GEOMÉTRICA E NUMÉRICA NA GERAÇÃO DE MALHAS DE ELEMENTOS FINITOS EM 2D E 3DRAFAEL ARAUJO DE SOUSA 20 August 2007 (has links)
[pt] Este trabalho apresenta uma metodologia para geração de
malhas
adaptativas de elementos finitos 2D e 3D usando
modeladores geométricos com
multi-regiões e superfícies paramétricas. A estratégia
adaptativa adotada é
fundamentada no refinamento independente das curvas,
superfícies e sólidos.
Inicialmente as curvas são refinadas, no seu espaço
paramétrico, usando uma
técnica de partição binária da curva (binary-tree). A
discretização das curvas é
usada como dado de entrada para o refinamento das
superfícies. A discretização
destas é realizada no seu espaço paramétrico e utiliza uma
técnica de avanço de
fronteira combinada com uma estrutura de dados do tipo
quadtree para gerar
uma malha não estruturada de superfície. Essas malhas de
superfícies são
usadas como dado de entrada para o refinamento dos
domínios volumétricos. A
discretização volumétrica combina uma estrutura de dados
do tipo octree
juntamente com a técnica de avanço de fronteira para gerar
uma malha sólida
não estruturada de elementos tetraédricos. As estruturas
de dados auxiliares dos
tipos binary-tree, quadtree e octree são utilizadas para
armazenar os tamanhos
característicos dos elementos gerados no refinamento das
curvas, superfícies e
regiões volumétricas. Estes tamanhos característicos são
definidos pela
estimativa de erro numérico associado à malha global do
passo anterior do
processo adaptativo. A estratégia adaptativa é
implementada em dois
modeladores: o MTOOL (2D) e o MG (3D), que são
responsáveis pela criação de
um modelo geométrico, podendo ter, multi-regiões, onde no
caso 3D as curvas e
superfícies são representadas por NURBS. / [en] This work presents a methodology for adaptive generation
of 2D and 3D
finite-element meshes using geometric modeling with multi-
regions and
parametric surfaces. The adaptive strategy adopted in this
methodology is based
on independent refinements of curves, surfaces and solids.
Initially, the model´s
curves are refined using a binary-partition algorithm in
parametric space. The
discratizetion of these curves is used as input for the
refinement of adjacent
surfaces. Surface discretization is also performed in
parametric space and
employs a quadtree-based refinement coupled to an
advancing-front technique
for the generation of an unstructured triangulation. These
surface meshes are
used as input for the refinement adjacent volumetric
domains. Volume
discretization combines an octree refinement with an
advancing-front technique
to generate an unstructural mesh of tetrahedral elements.
In all stages of the
adaptive strategy, the refinement of curves, surface
meshes and solid meshes is
based on estimated numerical errors associated to the mesh
of the previous step
in the adaptive process. In addition, curve and surface
refinement takes into
account metric distortions between parametric and
Cartesian spaces and high
curvatures of the model´s geometric entities. The adaptive
strategies are
implemented in two different modelers: MTOOL (2D) and MG
(3D), which are
responsible for the creation of a geometric model with
multi-regions, where for
case 3D the curves and surfaces are represented by NURBS,
and for the
interactive and automatic finite-element mesh generation
associated to surfaces
and solid regions. Numerical examples of the simulation of
engineering problems
are presented in order to validate the methodology
proposed in this work.
|
196 |
[en] REAL OPTIONS ANALYSIS IN DISCRETE TIME AN APPLICATION TO RETAIL / [pt] UMA APLICAÇÃO DA TEORIA DE OPÇÕES REAIS EM TEMPO DISCRETO NO VAREJOALEXANDRE PEIXOTO REBELLO 21 February 2008 (has links)
[pt] As grandes redes varejistas brasileiras vêm passando por
um momento de
forte expansão geográfica, que tem por objetivo aumentar o
valor das empresas
através de ganhos de escala e aumento do poder de
negociação frente aos
fornecedores. A entrada em um novo mercado geográfico, no
entanto, apresenta
inúmeras incertezas que podem afetar a rentabilidade
destas novas lojas. O
método tradicional de avaliação pelo fluxo de caixa
descontado usualmente
utilizado para a abertura de novas lojas, não considera
que a abertura de uma
primeira loja traz novas informações de mercado que
permitem ao investidor
otimizar a sua estratégia de penetração neste mercado.
Essa dissertação propõe a
utilização da Teoria de Opções Reais para avaliar o
projeto de expansão de uma
rede de varejo para uma nova cidade, através da valoração
das flexibilidades
gerenciais de expansão e abandono disponíveis para a
empresa. O modelo
proposto, ao incorporar o valor da operação de uma segunda
loja no caso de
exercício da opção de expansão, aumenta o valor total do
projeto quando
comparado ao valor presente líquido calculado pelo método
do Fluxo de Caixa
Descontado, onde a decisão definitiva seria abrir apenas
uma loja. A Teoria de
Opções Reais mostrou-se superior na avaliação do projeto,
pois o valor do projeto
calculado pelo método do Fluxo de Caixa Descontado está
subestimado ao não
considerar as flexibilidades existentes no projeto. / [en] The large Brazilian retail companies are undergoing strong
geographical
expansion in order to enhance shareholders value by gains
of scale and greater
negotiation power with suppliers. The entrance into a new
geographical market,
however, presents many uncertainties that can affect the
return of these new
stores. The traditional approach of discounted cash flow
method, does not take
into account that the opening of the first new store
reveals new market
information that allows the investor to optimize his
penetration strategy in this
market. This dissertation proposes the use of the Real
Options Theory to value
the project to expand a retail company to a new market, by
valuing the managerial
flexibility of expansion and abandonment available to the
company. By
incorporating the value of the operation of a second store
in case of the exercise of
the expansion option , the proposed model increases the
total value of the project
when compared to the net present value calculated by the
discounted cash flow
analysis. The Real Options Theory was superior in the
project valuation as the
value of the project calculated by the discounted cash
flow analysis is
underestimated by not considering the existing flexibility
in the project.
|
197 |
[en] CLASSIFICATION AND SEGMENTATION OF MPEG AUDIO BASED ON SCALE FACTORS / [pt] CLASSIFICAÇÃO E SEGMENTAÇÃO DE ÁUDIO A PARTIR DE FATORES DE ESCALA MPEGFERNANDO RIMOLA DA CRUZ MANO 06 May 2008 (has links)
[pt] As tarefas de segmentação e classificação automáticas de
áudio vêm se tornando cada vez mais importantes com o
crescimento da produção e armazenamento de mídia digital.
Este trabalho se baseia em características do padrão MPEG,
que é considerado o padrão para acervos digitais, para gerir
algoritmos de grande eficiência para realizar essas arefas.
Ao passo que há muitos estudos trabalhando a partir do
vídeo, o áudio ainda é pouco utilizado de forma eficiente
para auxiliar nessas tarefas. Os algoritmos sugeridos
partem da leitura apenas dos fatores de escala presentes no
Layer 2 do áudio MPEG para ambas as tarefas. Com isso, é
necessária a leitura da menor quantidade possível de
informações, o que diminui significativamente o volume de
dados manipulado durante a análise e torna seu desempenho
excelente em termos de tempo de processamento. O algoritmo
proposto para a classificação divide o áudio em quatro
possíveis tipos: silêncio, fala, música e aplausos. Já o
algoritmo de segmentação encontra as mudanças ignificativas
de áudio, que são indícios de segmentos e mudanças de cena.
Foram realizados testes com diferentes tipos de vídeos, e
ambos os algoritmos mostraram bons resultados. / [en] With the growth of production and storing of digital media,
audio segmentation and classification are becoming
increasingly important. This work is based on
characteristics of the MPEG standard, considered to be the
standard for digital media storage and retrieval, to
propose efficient algorithms to perform
these tasks. While there are many studies based on video
analysis, the audio information is still not widely used in
an efficient way. The suggested algorithms
for both tasks are based only on the scale factors present
on layer 2 MPEG audio. That allows them to read the
smallest amount of information possible, significantly
diminishing the amount of data manipulated during the
analysis and making their performance excellent in terms of
processing time. The algorithm proposed for audio
classification divides audio in four possible types: silent,
speech, music and applause. The segmentation algorithm
finds significant changes on the audio signal that
represent clues of audio segments and scene changes.
Tests were made with a wide range of types of video, and
both algorithms show good results.
|
198 |
[en] ROTOR ACCIDENT ANALYSIS: MODELLING AND SIMULATION / [pt] ANÁLISE DE ACIDENTE COM ROTOR: MODELAGEM E SIMULAÇÃORICARDO E SILVA DE SANT ANNA 09 July 2008 (has links)
[pt] A Dissertação aqui apresentada descreve um acidente em um
rotor de máquina de grande porte (compressor de ar) de uma
fábrica de fertilizante cujas conseqüências foram perdas
financeiras de alta monta tanto para a empresa quanto para o
Estado, pela importância econômica onde a fábrica
é situada. O objetivo da Dissertação foi simular
matematicamente o acidente ocorrido e esclarecer o mesmo.
Para se chegar ao diagnóstico do problema se modelou o rotor
e o discretizou pelo Método de Elementos Finitos. As
técnicas de investigação do problema e a sua seqüência de
investigação podem ser tomadas como base em investigação de
eventuais acidentes envolvendo rotores futuramente. O
capítulo relativo a Análise Modal será extraído como base de
apostila para curso envolvendo pessoal da área de
Manutenção Mecânica. / [en] A problem related with an air compressor gave birth to the
MSc Thesis. Problems related with rotative machines are
usual in the industrial field. Difficulties come from the
data gathering in order to analyze, and propose
a theory of failure in order to explain and avoid the
recurrence of such problem. Modelling a rotor with a
Timoshenko beam element and the discretization by finite
element method permit the dynamical analysis and
the modal analysis of the rotor considering its interaction
with the radial and thrust bearings (assuming stiffness and
rigidity). The work is divided in seven chapters: chapter
one introduces the work and gives the overview
of it; chapter two describes the industrial problem; chapter
three is a brief explanation of bearing types and the
fundamental principle of lubrication; chapter four
introduces vibration theory and modal analysis; chapter five
introduces the finite element method; chapter six is the
simulation of the problem, using tailor-made MATLABr
programs to reconstruct the problem and to compare the test
field results with the here mentioned formulation; chapter
seven discusses the results and proposes future works.
Appendix shows the kinetic theory and the beam deformation
model used in the program and the Laval simple rotor as a
limited description of the dynamic of a rotor with
distributed mass, rigidity and stiffness. The aim
of this work is to help understand and avoid the recurrence
of the failure described and to easy the understanding of
modal analysis for new engineers and technicians which will
deal with rotor dynamics.
|
199 |
[en] AMPLITUDE ANALYSIS OF THE DECAY D+ K (PI)-(PI)+(PI)+ IN FOCUS EXPERIMENT / [pt] ANÁLISE DE AMPLITUDES DO DECAIMENTO D+ KS(PI)-(PI)+(PI)+ NO EXPERIMENTO FOCUSJUAN MARTIN OTALORA GOICOCHEA 26 February 2008 (has links)
[pt] O presente trabalho de tese é destinado ao estudo do
decaimento do méson
D+ KS(pi)−(pi)+(pi)+ com dados coletados pelo experimento
FOCUS do
Fermilab. O estado final, composto por 4 mésons pseudo-
escalares, pode
ser alcançado através de uma considerável variedade de sub-
estruturas
ressonantes. O proposito da análise é encontrar quais são
estes possíveis
canais intermediários através de suas contribuições e
fases relativas. Para
tanto, é utilizado o formalismo de Análise de Amplitudes
usando o chamado
Modelo Isobárico. A dinâmica do decaimento é definida
através de uma
função que contém as características (formas funcionais
das ressonâncias,
distribuição angular, etc) dos canais que intervêm no
decaimento e cujo
domínio é um espaço o de fase determinado por 5
invariantes (devido às
restrições de decaimento em quatro corpos sem spin). A
função é então
ajustada ao conjunto de dados coletados.
Nos resultados, verificamos uma grande contribuição do
méson vetor-axial
a1(1260) (52%) seguido do vetor-axial K1(1400) (34%). Além
disso, o
modelo apresenta contribuição da ressonância (sigma)
(cerca de 8%, vinda de
a1(sigmapi)KS e sigmaKSpi) e uma razoável contribuição da
ressonância escalar K−
(14%). O estado K já foi visto em seu modo neutro em
outros decaimentos
de charme, porém ainda não em seu modo carregado. Não
encontramos contribui
ção significativa do decaimento direto em 4 corpos (não-
ressonante).
Esta tese vem se somar ao esforço no entendimento da
dinâmica das intera
ções fortes a baixas energias, que nos últimos anos tem
ganhado da
física de mésons charmosos uma importante contribuição. / [en] This thesis is devoted to the study of the decay D+ KS(pi)−
(pi)+(pi)+ with
data collected from the FOCUS experiment, at Fermilab. The
final state
composed of 4 pseudo-scalars can be produced through a
number of resonant
sub-structures. The purpose of this analysis is to find
the contributing
intermediate states by measuring their relative strenghts
and phases. For
that, the Amplitude Analysis formalism is used, with the
so-called Isobar
Model. The decay dynamics is described through a function
which has the
features of the contributing channels (functional forms of
the resonances,
angular distribution, etc) and which domain is a phase
space determined by
5 invariants (due to the kinematical constraints of a 4-
body spinless decay).
The data sample is thus fitted to this function.
Our results show a dominant contribution of the axial-
vector meson a1(1260)
(52%), followed by the K1(1400) axial-vector (34%).
Moreover, the model
presents a contribution from the sigma meson (about 8% as
a1(sigmapi)KS and
sigmaKSpi) and a significant contribution from the scalar
k−. The k state has
been reported in its neutral mode in other charm decays
but not is its
charged mode. We find no significant contribution from the
direct 4-body
decay (non-resonant). This work adds to the effort in the
understanding of
the strong-interaction dynamics at low energies, which in
recent years have
been receiving an important contribution from charm meson
physics.
|
200 |
[en] THE CONSTRUCTION OF IDENTITIES IN THE DISCOURSE OF TEACHERS, STUDENTS AND THE SCHOOL BOARD IN A PUBLIC INSTITUTION FOR BASIC EDUCATION / [pt] A CONSTRUÇÃO DE IDENTIDADES NO DISCURSO DE PROFESSORES, ALUNOS E DIREÇÃO DE UMA INSTITUIÇÃO PÚBLICA DE EDUCAÇÃO BÁSICAELAINE SOUZA DA SILVA 12 September 2006 (has links)
[pt] A construção de identidades no contexto educacional tem
sido foco de
muitos estudos contemporâneos (eg. Fairclough, 1995;
Kumaravadivelu, 1999;
Kleiman, 2001; Moita Lopes, 1999). Essas pesquisas
evidenciam a interação entre
professores e alunos como elemento primordial para a
observação e análise das
identidades projetadas discursivamente no processo
ensino-
aprendizagem dentro
do contexto da sala de aula. No entanto, as identidades
discursivas da direção não
aparecem como objeto de estudo nesse contexto. O
presente
estudo preenche tal
lacuna, investigando como professores, alunos e direção
constroem
discursivamente suas identidades em um contexto que não
o
de sala de aula. A
investigação é realizada com base na microanálise
etnográfica (Erickson, 1996) e
os dados foram obtidos através de questionários,
narrativas e prática exploratória,
tendo sido analisados qualitativamente a partir do
sistema
de transitividade e da
modalidade da Gramática Sistêmico-Funcional (Halliday,
1985, 1994), à luz de
uma abordagem crítica do discurso pedagógico
(Fairclough,
1995; Giroux, 1997).
Os resultados sinalizam que, discursivamente, as
identidades projetadas pela
direção consolidam-se no discurso da administração e
controle (Giroux, 1997) e
corroboram o papel que a direção assume
institucionalmente. Por outro lado,
professores e alunos projetam identidades segundo o
discurso da relevância e
integração. Finalmente, os dados também apontam que o
afeto é utilizado,
implicitamente, como estratégia de negociação. / [en] The construction of identities in educational contexts has
been the focus of
many contemporary studies (eg. Fairclough,1995;
Kamaravadivelu,1999;
Kleiman, 2001; Moita Lopes, 1999). Such research has
focused on interaction
between teachers and students, observing and analyzing
discursive identities
projected along the teaching-learning process, in a
classroom context. However,
the discursive identities projected by the school board do
not emerge in this
context. This study fulfills such a gap, investigating how
teachers, students and
the school board construct their discursive identities in
a context other than the
classroom. To do so, it conducts ethnographic
microanalysis (Erickson,1996) on
data obtained by questionnaires, narratives and
exploratory practice, within a
qualitative paradigm. The categories of analysis are from
Systemic-Functional
Grammar (Halliday, 1985 and 1994), namely the transitivity
system and modality,
and they have been undertaken from the critical
perspective of pedagogical
discourse analysis (Fairclough, 1995; Giroux, 1997). The
results have indicated
that the identity discursively projected by the school
board fits the management
and control discourse (Giroux,1997), corroborating the
board´s institutional role.
On the other hand, teachers and students project
identities that fit the relevance
and integration discourse. In addition, results have
revealed that affect is
implicitly used as a negotiation strategy.
|
Page generated in 0.2918 seconds