No description available.

Le 21e siècle est le berceau d’une conscientisation grandissante sur les impacts environnementaux des processus utilisés pour synthétiser des molécules cibles. Parmi les avancées qui ont marqué ces dernières décennies, il est également question de réduction de déchets, de conservation de l’énergie et de durabilité des innovations. Ces aspects constituent les lignes directrices de la chimie verte. De ce fait, il est impératif de développer des stratégies de synthèse dont les impacts environnementaux sont bénins. Dans ce mémoire nous présentons la synthèse, la caractérisation et l’étude des propriétés catalytiques en milieu aqueux d’un ligand composé d’une unité -cyclodextrine native, d’une unité imidazolium et d’une chaine alkyle à 12 carbones. Ce ligand hybride s’auto-assemble dans l’eau sous forme de micelles, permettant ainsi d’effectuer en sa présence des couplages de Suzuki-Miyaura dans l’eau, avec de bons rendements. La fonctionnalisation de la face primaire de la -cyclodextrine par un noyau alkyl-imidazolium, précurseur de ligand de type carbène N-hétérocyclique, a permis le développement d’un système catalytique vert et hautement recyclable. Dans un deuxième temps, nous présentons l’utilisation du même ligand hybride dans des couplages de Heck dans l’eau, démontrant ainsi la versatilité du ligand. / Chemistry keeps evolving in new directions. Research has provided improved methodologies for the design and synthesis of targeted molecules. At the same time, the 21st century is witnessing increasing concern about the environmental impacts of chemical wastes. A new philosophy of chemical research and engineering has emerged, known as «Green chemistry». This concept encourages the design of products, processes and technologies that minimize the use and generation of hazardous substances. Therefore, there is an urge to develop environmentally friendly process to convert molecules into product of interest. In the present thesis, we describe the synthesis, characterization and catalytic properties of a novel alkylimidazolium-modified β-cyclodextrin (-CD). Our strategy was to construct a single amphiphilic bimodal ligand by the combination of a mass transfer unit (-CD), covalently bound to a ligand moiety (alkylimidazolium, an N-heterocyclic carbene (NHC) precursor) for aqueous catalysis. First, we demonstrated that the introduction of a dodecyl chain on the imidazolium moiety attached to the primary face of a native β-CD allows the formation of a highly active micellar self-assembled catalytic system in neat water with remarkable recyclable properties for the Suzuki–Miyaura coupling. In addition, we studied the versatility of this self-assembled bimodal system by performing Heck coupling in neat water.

Les sels d’imidazolium ont un rôle important dans certaines protéines et acides nucléiques et ont été utilisés à de nombreuses reprises dans des assemblages supramoléculaires en raison de leurs propriétés uniques. Les sels de diimidazolium dérivés sont toutefois moins connus. Ils ont pour l’instant uniquement été utilisés comme des précurseurs de carbènes N-hétérocycliques. Ils sont donc à la base de plusieurs catalyseurs utilisés pour des réactions de couplage croisés mais leurs propriétés sont toutefois méconnues dans le cadre de la chimie supramoléculaire. Cette classe de composés a nottament attiré notre attention en raison de la facilité de modification de leurs propriétés physico-chimiques par modification de leur structure chimique. L’objectif général des travaux présentés dans cette thèse est l’étude des propriétés supramoléculaires des sels de diimidazolium disubstitués en solution (aqueuse ou organique), ainsi qu’en phase solide ou cristal-liquide. L’influence de l’espaceur entre les deux noyaux imidazolium ainsi que l’influence des substituants latéraux et des contre-ions a été étudiée. Dans un premier temps, les propriétés de complexation des sels de diimidazolium à des macrocycles sont étudiées. Les sels bromure sont étudiés en solution aqueuse avec plusieurs cyclodextrines et le cucurbit[7]uril, et les sels hexafluorophosphate sont étudiés en solution organique pour leur complexation avec l’éther couronne DB24C8 et un calix[4]arène. Cette nouvelle classe de composés a montré de très bonnes propriétés de complexation à ces différents macrocycles en solution et a également permis de contrôler différents assemblages supramoléculaires à l’interface air-eau. Dans un deuxième temps, l’étude des sels de phénylènediimidazolium a permis de modifier les propriétés de complexation en solution pour obtenir la formation de complexes multiples avec le cucurbit[7]util en solution aqueuse. Cette même famille de composés a également permis la formation de cristaux liquides ioniques lorsque les substituants sont des chaînes alkyles plus longues. La résolution de plusieurs structures cristallines de différents sels de diimidazolium a finalement permis de comprendre la nature des interactions intermoléculaires à l’état cristallin. La recherche présentée dans cette thèse a donc permis une étude détaillée des propriétés supramoléculaires des sels de diimidazolium dans tous les états de la matière qui leur sont accessibles. / Imidazolium salts play an important role in different proteins and nucleic acids and have been used many times in supramolecular assemblies due to their unique properties. Diimidazolium salts derived from imidazolium salts are less known. To date, they have only been used as precursors for N-heterocyclic carbenes, which are used to catalyze various cross-coupling reactions. Their properties are not well known in supramolecular chemistry. This class of compounds attracted our attention because of the ease of tuning their properties by modifying their chemical structure. The main goal of the research presented in this thesis was to study the supramolecular properties of disubstituted diimidazolium salts in solution (aqueous or organic solution), in the solid state and in the liquid-crystalline state. The role of the spacer between the two imidazolium moieties, of the sidechains and of the counterions was studied. Firstly, the complexation between diimidazolium salts and various macrocycles was studied. Bromide salts were studied in aqueous solution with cyclodextrins and cucurbit[7]uril, while hexafluorophosphate salts were studied in organic solution with a DB24C8 crown ether and a calix[4]arene. This novel class of compounds showed very promising complexation properties with these macrocycles in solution and also allowed us to control the formation of various supramolecular assemblies at the air-water interface. Secondly, phenylenediimidazolium salts were studied and allowed the modification of the complexation properties in aqueous solution. Multiple complexes can be formed simultaneously with cucurbit[7]uril in aqueous solution. The same class of compounds also has the ability to yield ionic liquid crystals when the alkyl sidechains are long. The resolution of the crystalline structures of some synthesized diimidazolium salts allowed us to understand the nature of the intermolecular interactions in the solid state. The research presented in this thesis is a complete study of the supramolecular properties of diimidazolium salts in every accessible state of matter.

L’intérêt grandissant porté au cours de ces dix dernières années aux monolithes organiques pour des applications électroséparatives se justifie en partie par leur préparation aisée au sein de systèmes miniaturisés, le large choix des monomères précurseurs disponibles, ainsi que la possibilité d’ajuster les paramètres structuraux du matériau final par un contrôle judicieux des conditions opératoires. Au cours de ce travail, la synthèse de nouvelles phases monolithiques a été mise au point selon une stratégie en deux étapes. Dans une première étape, la copolymérisation radicalaire photo-initiée du Nacryloxysuccinimide avec le diméthacrylate d’éthylène glycol réalisée en présence de toluène, a permis l’élaboration de monolithes macroporeux réactifs et hautement perméables. La présence d’esters de succinimide dans la structure chimique du monolithe polymère a été mise à profit pour fonctionnaliser la surface du monolithe par des greffons de nature variée par réaction de substitution nucléophile faisant intervenir des dérivés aminés. Le choix judicieux des greffons a permis la mise au point rapide de phases stationnaires présentant des propriétés électrochromatographiques ciblées. Ainsi, le contrôle du caractère hydrophobe des supports obtenus par greffage d’alkylamines de taille variable a été mis en évidence par la séparation de dérivés benzéniques selon un mécanisme à polarité de phase inversée avec de très bonnes efficacités (200000 plateaux par mètre). L’utilisation de phases stationnaires monolithiques greffées par des sélecteurs aromatiques a été proposée comme alternative aux monolithes aliphatiques hydrophobes. La synthèse de monolithes organiques hydrophiles a été possible par la fonctionnalisation du support réactif par des alkyldiamines. La préparation d’une phase stationnaire chirale a été réalisée selon une approche originale de chimie click consistant à immobiliser un dérivé de cyclodextrine. Dans le but d’étendre l’application des monolithes à base de NAS au greffage de biomacromolécules, une nouvelle matrice monolithique incorporant dans sa structure chimique un co-monomère hydrophile a été élaborée. Les résultats préliminaires ont montré que l’augmentation du caractère hydrophile du squelette monolithique permet d’accroître sensiblement la réactivité des esters de Nhydroxysuccinimide en milieu aqueux / The continuously growing interest observed over the past ten years in the field of organic monoliths dedicated to electroseparation applications is mainly due to their easy preparation methods which are also well-suited to the development of miniaturized systems, the wide range of available monomers and the possibility of tuning the structural parameters of the final material by a judicious control of the synthesis conditions. In the present work, the synthesis of new monolithic stationary phases has been developed using a two-stage strategy. In a first step, the photo-initiated free radical copolymerization of Nacryloxysuccinimide with ethylene glycol dimethacrylate was performed in the presence of toluene allowing the preparation of reactive and macroporous monoliths with high permeability properties. The presence of succinimide esters in the chemical structure of the polymer monolith was used to functionalize the surface of the monolith by various grafts through nucleophilic substitution reaction involving amino derivatives. The judicious choice of the grafts permits the fast development of stationary phases with target electrochromatographic properties. Indeed, the tuning of the hydrophobic nature of the monolithic materials was obtained by the grafting of varied alkylamines and was demonstrated by the separation of benzene derivatives by reversed phase mechanism with very good efficiencies (200 000 plates per meter). The use of monolithic stationary phases grafted with aromatic selectors has been proposed as an alternative to the aliphatic-grafted hydrophobic monoliths. The synthesis of organic hydrophilic monoliths was possible by functionalization of the reactive support by alkyldiamines. The preparation of a chiral stationary phase was performed using an original click chemistry approach involving the immobilization of a cyclodextrin derivative. With the aim to extend the application range of NAS-based monoliths to the grafting of biomacromolecules for selective capture and enzymatic digestion applications, a new monolithic matrix incorporating in its chemical structure a hydrophilic comonomer was prepared. Preliminary results showed that the increase in the hydrophilic character of the polymeric skeleton allows increasing significantly the reactivity of N-hydroxysuccinimide esters in aqueous medium

O presente trabalho é composto por 4 capítulos distintos. No primeiro intitulado \"Ciclodextrinas: tecnologia para melhoria da solubilidade de fármacos pouco solúveis\" aborda-se uma revisão das ciclodextrinas e de seus derivados, como também a formação dos complexos de inclusão. No segundo capítulo, \"Obtenção e caracterização de complexos ternários de saquinavir, β-ciclodextrina e polivinilpirrolidona\", foram avaliadas condições que poderiam influenciar na obtenção dos complexos, tais como: tempo de agitação na formação dos complexos, proporção equimolar de fármaco e ciclodextrina, solvente para solubilização do fármaco e porcentagem de polímero hidrossolúvel, concluindo-se que as melhores condições para obtenção dos complexos são 48 horas de agitação, razão equimolar 1:2 e 1:4, água para solubilização do fármaco e acréscimo de1% de polímero ao sistema. O terceiro capítulo, \"Influência do método de secagem na obtenção de complexos ternários de saquinavir\", teve o objetivo de obter e caracterizar complexos ternários de saquinavir, β-ciclodextrina e polivinilpirrolidona pelos métodos de secagem em estufa e liofilização, bem como, comparar a influência dos métodos de obtenção na solubilidade do fármaco, chegando-se ao aumento de 44 vezes da solubilidade do fármaco quando na forma de complexo SAQ:βCD:PVP de proporção equimolar 1:2 obtido por liofilização. O quarto, \"Perfil de dissolução de cápsulas e comprimidos contendo complexos ternários de saquinavir, ciclodextrina e polivinilpirrolidona\", teve o objetivo de comparar o perfil de dissolução de cápsulas de gelatina dura e comprimidos contendo sistemas ternários SAQ:βCD:PVP, obtidos pelos métodos de secagem em estufa e liofilização e o produto referência (Fortovase®). Os resultados indicam que os perfis de dissolução das formas farmacêuticas contendo complexos liofilizados apresentaram melhores resultados de eficiência de dissolução e que as cápsulas liberam mais prontamente o ativo que os comprimidos. / The present study has 4 captions. The first is called \"Cyclodextrins: Technology to improve the solubility of the little soluble drugs\" show a review of the cyclodextrins and its derivates, as well the formations of inclusion complexes. At the second caption, \"Preparation and characterization of the ternary complexes of the saquinavir, &#946-cyclodextrin and polyvinylpyrrolidone\", were evaluated some conditions that could influence in an obtention of the complexes like stirring time at the formation of the complexes, equimolar ratio of the drug and cyclodextrin, solvent for the solubility of the drug and percentage of the hydrosoluble polymer concluding that the best conditions for the formation of the complexes are: 48 hours of the stirring, equimolar ratio 1:2 and 1:4, water to solubilize the drug and addition of 1% of the polymer in the system. The third caption, \"Influence of the drying method at the formation of the ternary complexes of the saquinavir\", had the aim to prepare and characterize ternary complexes of the saquinavir, &#946-cyclodextrin and polyvinylpyrrolidone by the method of drying in equipment and lyophilization, as well to compare the influence of the methods of the obtention at the solubility of the drug, reaching the increasing of 44 times the solubility of the drug when at the form of the ternary inclusion complex (SAQ:βCD:PVP) at the equimolar ratio 1:2 obtained by lyophilization. The fourth and the last caption, \"Dissolution rate of the capsules and tablets of ternary complex of the saquinavir, cyclodextrin and polyvinylpyrrolidone, had the aim to compare the dissolution profile of capsules of the hard gelatine and tablets of ternary complexes SAQ:βCD:PVP obtained by the method of drying in equipment and lyophilization and the reference product (Fortovase®). The results indicate that the dissolution profiles of the pharmaceutical forms of lyophilized complexes show better results of the efficience of the dissolution and that the capsules liberate more efficient the active than the tablets.

L'objectif de ce travail a consisté à identifier des polluants émergents dans des eaux usées issues de stations d'épuration ainsi que dans le milieu naturel et à proposer une méthode de remédiation et un suivi de ces polluants. Dans un premier temps, nous avons identifié les polluants organiques contenus dans les échantillons d'eaux usées et issues du milieu naturel par chromatographie en phase liquide ou gazeuse couplée à une spectrométrie de masse, chromatographie en phase gazeuse par espace de tête statique et par spectrométrie par torche à plasma couplée à une spectrométrie de masse. Différents polluants ont été trouvés tels que les phtalates, des substances médicamenteuses, le cholestérol et des éléments de traces métalliques. Dans le but de piéger ces polluants, différents polymères de cyclodextrine (CD) solubles et insolubles dans l'eau ont été synthétisés et leurs capacités d'adsorption ont été évaluées. Après adsorption sur les polymères de CD, nous avons observé une diminution de la teneur en carbone organique total (COT) de l'effluent. Ces polymères se sont révélés être des adsorbants efficaces. Dans un second temps, des verres du système pseudo-ternaire Agl-HgS-As₂S₃ ont été synthétisés en ajoutant le composé le composé Agl dans le système pseudo-binaire HgS-As₂S₃. Ces verres de chalcogénures sont des membranes ionosélectives permettant de détecter les ions Hg²⁺ dans les effluents. Tout d'abord, nous avons défini le domaine vitreux des verres à l'aide de la diffraction des rayons X, ensuite les propriétés macroscopiques des verres ont été déterminées. Ainsi, les propriétés de transport ont été étudiées à l'aide de la spectroscopie d'impédance complexe montrant que l'ajout d'Agl dans le verre pseudo-binaire HgS-As₂S₃ provoque une augmentation de la conductivité ionique. Afin de comprendre ce phénomène, diverses études structurales ont été déployées par spectroscopie Raman, diffraction de neutrons et de rayon X haute énergie. Ces techniques ont montré que l'évolution de la conductivité ionique est dépendante de la structure du verre qui forme des chemins préférentiels de conduction. Enfin, différents capteurs avec différentes compositions sont testés afin de définir la sensibilité, la limite de détection et les coefficients de sélectivité en présence d'ions interférents. / The aim of this work was to identify the emerging pollutants in the effluents of wastewater treatment plants as well as in the natural environment, and to propose a method of remediation and monitoring of these pollutants. In the first part of the thesis, we have identified the organic pollutants contained in the wastewater samples using (i) gas and/or liquid chromatography coupled with a mass spectrometry, (ii) static-headspace gas chromatography, and (iii) inductively coupled plasma atomic emission spectroscopy. Different pollutants were found such as phthalates, drugs, cholesterol, and heavy metal traces. In order to trap these pollutants, various water soluble/insoluble cyclodextrin β-CD polymers have been synthesized and their adsorption capacities were evaluated. After the analysis of the effluent samples, we observed a decrease of the Total Organic Carbon (TOC). This decrease was attributed to the adsorption of pollutant by CD polymers which have proven to be effective adsorbents. The second part of the thesis included two main sub-parts : (i) a synthesis and characterization part and (ii) an application part. In the first sub-part, chalcogenide glasses in the pseudo-ternary Agl-HgS-As₂S₃ system have been synthesized by adding silver iodide "Agl" to the quasi-binary HgS-As₂S₃ system. The vitreous domain and the macroscopic properties of glass samples were determined. Electrical conductivity of glasses was studied using both the complex impedance spectroscopy and resistivity measurements ; it was found that adding Agl to the quasi-binary HgS-As₂S₃ alloy causes an increase in the ionic conductivity. Structural studies, using various techniques as Raman spectroscopy, neutron scattering and high-energy X-ray diffraction, have been performed in order to decipher the relation between both structural and transport properties in these glasses. In the second sub-part, the obtained glasses in the ternary system were used as membranes in chemical sensors dedicated to mercury detection in aqueous solution. As a result, various sensors with different compositions were tested to determine their corresponding sensitivity, detection limit and selectivity coefficients in the presence of interfering ions.

O presente estudo teve como objetivo obter e caracterizar complexos binários e ternários de benznidazol (BNZ) com ciclodextrinas e polímeros hidrossolúveis com a finalidade de melhorar a solubilidade do fármaco. Efetuou-se a caracterização físico-química do fármaco avaliando-se solubilidade, calorimetria exploratória diferencial (DSC), termogravimetria (TGA), investigação de novas formas cristalinas e a definição de parâmetros para o ensaio de dissolução intrínseca. Posteriormente, esses dados foram utilizados como referência nos estudos de caracterização dos complexos de inclusão. Os complexos binários utilizaram as ciclodextrinas naturais αCD, βCD e γCD, e os ternários a βCD e HPβCD e adição de 1,0% de polímeros hidrossolúveis (povidona e copovidona). Os complexos foram secos em estufa e adicionalmente dois métodos de preparo co-evaporação e liofilização foram empregados para comparação e escolha do mais adequado. O estudo de caracterização dos complexos foi realizado através do método de solubilidade de fases, DSC e TGA. A constante de estabilidade, a eficiência de complexação e solubilidade sugeriram maior interação do fármaco com a βCD. Nos complexos ternários, a utilização de copovidona foi mais efetiva que a povidona. Houve aumento da solubilidade quando os complexos foram preparados pelo método de liofilização. A melhor solubilidade foi alcançada pelos complexos BNZ:βCD (0,84 mg/mL) e BNZ:βCD:copovidona (0,86 mg/mL) preparados pelo método de liofilização. / The present study was aimed to obtain and characterize binary and ternary complexes of benznidazole (BNZ) with cyclodextrins and water-soluble polymers with the purpose to improve the solubility of drug. It was performed the physicochemical characterization of BNZ by differential scanning calorimetry (DSC), thermogravimetry (TGA), investigation of new crystalline forms and the definition of parameters for the intrinsic drug dissolution test of intrinsic dissolution. Subsequently, these informations were used as reference in the studies of characterization of the inclusion complexes. The binary complexes were prepared with the cyclodextrins αCD, βCD and γCD and the ternary with βDC and HPβCD and addition of 1.0% of water-soluble polymers (povidone and copovidone). The complexes were dried in tray drayer and additionally two methods of preparation coevaporation and lyophilization were employeed for comparison and the best was selected. The characterization of the complexes was carried out by phase-solubility method, DSC and TGA. The constant of stability, the efficiency of complexation and solubity suggested higher interaction of the drug with the βCD. In the ternary complexes, the use of copovidone was more effective in the solubility than to povidone. There was an increased of solubility when the complexes were prepared by lyophilization. To best solubility was achieved by the complexes BNZ:βCD (0.84 mg/ml) and BNZ:βCD:copovidone (0.86 mg/ml) prepared by lyophilization method.

A radiação UV pode causar danos à pele humana, e, evitar estes danos, é uma preocupação crescente para a população e um desafio à comunidade científica. Para uma ação efetiva de fotoproteção, a associação de filtros, como avobenzona (BMBM) e ρ-metoxicinamato de octila (EHMC), são empregados. Devido à semelhança estrutural com os filtros solares químicos, a rutina (RUT), tal como outros flavonoides, apresenta atividade fotoprotetora. Apesar da disponibilidade de diferentes classes de filtros solares, o desenvolvimento de fotoprotetores contendo filtros químicos é um desafio, devido à instabilidade inerente a certos filtros orgânicos. As ciclodextrinas (CDs) são oligossacarídeos cíclicos, de formato tronco-cônico, cuja estrutura externa é hidrófilica e sua cavidade interna central hidrofóbica, com a capacidade de acomodar substâncias lipofílicas, formando complexos de inclusão. A formação dos complexos de inclusão pode levar à alterações de propriedades físico-químicas da molécula hóspede, tais como, solubilidade, fotoestabilidade e biodisponibilidade. O objetivo deste trabalho foi desenvolver, caracterizar e avaliar a formação de complexos de inclusão entre RUT, BMBM e EHMC e as CDs (HPβCD e SBEβCD). Os complexos de inclusão (RUT:HPβCD, RUT:SBEβCD, BMBM:HPβCD, BMBM:SBEβCD, EHMC:HPβCD e EHMC:SBEβCD) foram obtidos pelo método de liofilização e quantificados por cromatografia líquida de alta eficiência (CLAE). Os sistemas binários foram caracterizados em solução, pelo método de equilíbrio de solubilidade, e, no estado sólido, empregando calorimetria exploratória diferencial (DSC), termogravimetria (TG/DTG) e difração de raios-X de pó (PDRX). As substâncias isoladas e os complexos binários foram avaliados quanto à fotoestabilidade em estado sólido, e, em solução. Incremento na solubilidade (X mcg mL-1) foi observado para os complexo RUT:HPβCD (4,13x); RUT:SBEβCD (4,38x); BMBM:HPβCD (43,3x); BMBM:SBEβCD (53,3x); EHMC:HPβCD (12,7x); e EHMC:SBEβCD (70,0x). Os ensaios de DSC, TG/DTG, e P-DRX indicaram a formação de complexos de inclusão para os todos os sistemas, onde a supressão dos eventos endotérmicos característicos das substâncias isoladas foram observados; porém, nos complexos de BMBM, a presença de avobenzona livre no meio foi detectada, sugerindo, que a complexação não foi completa. A formação dos complexos de inclusão promoveu o aumento da fotoestabilidade em todos os sistemas avaliados, tanto no estado sólido, como em solução. Os resultados reportados neste estudo, indicaram que a complexação de substâncias fotoprotetoras com HPβCD e SBEβCD, pode representar, uma estratégia promissora quanto ao aumento da solubilidade e da fotoestabilidade. / UV radiation may cause demage on human skin, and preventing it, is an increasing worry for the population and a challenge to the scientific community. For an effective action of photoprotection, the association of filters, like avobention (BMBM) and octyl ρ-methoxycinnamate (EHMC), are used. Due to the structural similarity with the chemical solar filters, the rutin (RUT), like other flavonoids, shows photoprotective activity. Despite the availability of different classes of sunscreens, the development of photoprotectors containing chemical filters is a challenge, due to the inherent instability of certain organic filters. The cyclodextrins (CD) are cyclic oligosaccharides of truncated conical structure, which external structure is hydrophilic and its internal central hydrophobic cavity, with capacity to accommodate lipophilic substances, forming inclusion complexes. The formation of the inclusion complexes can lead to changes in physicalchemical properties of the host molecule, such as, solubility, photostability and bioavailability. The objective of this work was to develop, characterize and evaluate the formation of the inclusion complexes between RUT, BMBM and EHMC and the CDs (HPβCD and SBEβCD). The inclusion complexes (RUT:HPβCD, RUT:SBEβCD, BMBM:HPβCD, BMBM:SBEβCD, EHMC:HPβCD and EHMC:SBEβCD) were obtained by the lyophilization method and quantified by high performance liquid chromatography (HPLC). The binary systems were characterized in solution, by solubility equilibrium method and in solid state, using differential scanning calorimetry (DSC), thermogravimetry (TG/DTG) and powder X-ray diffraction (P-XRD). The isolated substances and binary complexes were evaluated the photostability in solid state, and in solution. The increase in solubility (X mcg mL-1) was observed for the complexes RUT:HPβCD (4.13x); RUT:SBEβCD (4.38x); BMBM:HPβCD (43.3x); BMBM:SBEβCD (53.3x); EHMC:HPβCD (12.7x); and EHMC:SBEβCD (70.0x). The analysis of DSC, TG/DTG, and P-DRX indicated the formation of inclusion complexes for all systems, where the suppression of the endothermic events characteristic of the isolated substances were observed; however, in the BMBM complexes, the presence of free avobenzone was detected, suggesting that the complexation was not complete. The formation of inclusion complexes promoted the increase of photostability in all evaluated systems, as in solid state as in solution. The results reported in this study indicated that the complexation of photoprotective substances with (HPβCD e SBEβCD). may represent a promising strategy for increasing solubility and photostability.

Les phosphines sulfonées sont les ligands hydrosolubles les plus utilisés en catalyse organométallique aqueuse. La méthode la plus courante d’introduction des groupements sulfonate sur une arylphosphine consiste en la réaction de celle-ci avec l’oléum sulfurique. Dans ce contexte, la première partie de cette thèse a été consacrée à la synthèse de nouvelles triarylphosphines sulfonées encombrées possédant des groupements naphtyle. Plus précisément, les phosphines sulfonées synthétisées ont été du type [(1 ou 2-naphtyl)x(phényl)3-x]phosphine (x = 1, 2, 3) avec en moyenne, deux groupes sodium sulfonate par molécule. Dans la seconde partie de cette thèse, le développement d’une nouvelle voie d’accès à des phosphines du type R-diphénylphosphines disulfonées, où R est un groupement sensible aux conditions drastiques de sulfonation a été mis en œuvre. Ce protocole met en jeu deux étapes : la première étape implique l’alkylation de la benzyldiphénylphosphine trisulfonée (BDPPTS) ou du 1,2-bis(diphénylphosphino)éthane tétrasulfoné (DPPETS) par un dérivé halogéné (RX) apportant le groupement R sensible. La seconde étape consiste en le clivage réducteur par l’aluminohydrure de lithium (LiAlH4) des sels de phosphonium ou de bis-phosphonium ainsi obtenus et conduit à la R-diphénylphosphine disulfonée. Les phosphines qui ont été synthétisées par cette méthode sont les n-octyl-, n-dodécyl-, n-hexadécyl-, phénéthyl- et but-3-ényl-diphénylphosphines disulfonées. Les phosphines sulfonées synthétisées dans le cadre de cette thèse ont été valorisées en tant que ligands dans la réaction d’hydroformylation du déc-1-ène catalysée au rhodium et assistée ou non par des cyclodextrines. / Sulfonated arylphosphanes are the most applied water-soluble ligands in aqueous organometalliccatalysis. Sodium sulfonate groups are commonly introduced on an arylphosphane by using sulfuric oleum(SO3/H2SO4) followed by neutralization with aqueous sodium hydroxide. In this context, the first part of thiswork was focused on the synthesis of new bulky sulfonated triarylphosphanes with naphtyl groups. Moreprecisely, sulfonated [(1 or 2-naphtyl)x(phenyl)3-x]phosphane (x = 1, 2, 3) with an average sulfonation degreearound two have been prepared. In the second part, a new and convenient synthesis pathway to disulfonatedR-diphenylphosphanes with R an oleum-sensitive group was developed. This route involves two steps: thefirst step is the alkylation of trisulfonated benzyldiphenylphosphane (BDPPTS) or tetrasulfonated 1,2-bis(diphenylphosphanyl)ethane (DPPETS) with an halide compound (RX) bearing the sensitive group R. Inthe second step, the synthetized trisulfonated phosphonium or tetrasulfonated bis-phosphonium salt aresubsequently cleaved by lithium aluminium hydride (LiAlH4) to give the corresponding disulfonated Rdiphenylphosphanes.The phosphanes obtained by this new methodology are the disulfonated n-octyl-, ndodecyl-,n-hexadecyl-, phenethyl-, and but-3-enyl-diphenylphosphanes. Most of the synthetized phosphanesin this work have then been tested as ligand in the rhodium catalyzed dec-1-ene hydroformylation assisted ornot by cyclodextrins.

A radiação UV pode causar danos à pele humana, e, evitar estes danos, é uma preocupação crescente para a população e um desafio à comunidade científica. Para uma ação efetiva de fotoproteção, a associação de filtros, como avobenzona (BMBM) e ρ-metoxicinamato de octila (EHMC), são empregados. Devido à semelhança estrutural com os filtros solares químicos, a rutina (RUT), tal como outros flavonoides, apresenta atividade fotoprotetora. Apesar da disponibilidade de diferentes classes de filtros solares, o desenvolvimento de fotoprotetores contendo filtros químicos é um desafio, devido à instabilidade inerente a certos filtros orgânicos. As ciclodextrinas (CDs) são oligossacarídeos cíclicos, de formato tronco-cônico, cuja estrutura externa é hidrófilica e sua cavidade interna central hidrofóbica, com a capacidade de acomodar substâncias lipofílicas, formando complexos de inclusão. A formação dos complexos de inclusão pode levar à alterações de propriedades físico-químicas da molécula hóspede, tais como, solubilidade, fotoestabilidade e biodisponibilidade. O objetivo deste trabalho foi desenvolver, caracterizar e avaliar a formação de complexos de inclusão entre RUT, BMBM e EHMC e as CDs (HPβCD e SBEβCD). Os complexos de inclusão (RUT:HPβCD, RUT:SBEβCD, BMBM:HPβCD, BMBM:SBEβCD, EHMC:HPβCD e EHMC:SBEβCD) foram obtidos pelo método de liofilização e quantificados por cromatografia líquida de alta eficiência (CLAE). Os sistemas binários foram caracterizados em solução, pelo método de equilíbrio de solubilidade, e, no estado sólido, empregando calorimetria exploratória diferencial (DSC), termogravimetria (TG/DTG) e difração de raios-X de pó (PDRX). As substâncias isoladas e os complexos binários foram avaliados quanto à fotoestabilidade em estado sólido, e, em solução. Incremento na solubilidade (X mcg mL-1) foi observado para os complexo RUT:HPβCD (4,13x); RUT:SBEβCD (4,38x); BMBM:HPβCD (43,3x); BMBM:SBEβCD (53,3x); EHMC:HPβCD (12,7x); e EHMC:SBEβCD (70,0x). Os ensaios de DSC, TG/DTG, e P-DRX indicaram a formação de complexos de inclusão para os todos os sistemas, onde a supressão dos eventos endotérmicos característicos das substâncias isoladas foram observados; porém, nos complexos de BMBM, a presença de avobenzona livre no meio foi detectada, sugerindo, que a complexação não foi completa. A formação dos complexos de inclusão promoveu o aumento da fotoestabilidade em todos os sistemas avaliados, tanto no estado sólido, como em solução. Os resultados reportados neste estudo, indicaram que a complexação de substâncias fotoprotetoras com HPβCD e SBEβCD, pode representar, uma estratégia promissora quanto ao aumento da solubilidade e da fotoestabilidade. / UV radiation may cause demage on human skin, and preventing it, is an increasing worry for the population and a challenge to the scientific community. For an effective action of photoprotection, the association of filters, like avobention (BMBM) and octyl ρ-methoxycinnamate (EHMC), are used. Due to the structural similarity with the chemical solar filters, the rutin (RUT), like other flavonoids, shows photoprotective activity. Despite the availability of different classes of sunscreens, the development of photoprotectors containing chemical filters is a challenge, due to the inherent instability of certain organic filters. The cyclodextrins (CD) are cyclic oligosaccharides of truncated conical structure, which external structure is hydrophilic and its internal central hydrophobic cavity, with capacity to accommodate lipophilic substances, forming inclusion complexes. The formation of the inclusion complexes can lead to changes in physicalchemical properties of the host molecule, such as, solubility, photostability and bioavailability. The objective of this work was to develop, characterize and evaluate the formation of the inclusion complexes between RUT, BMBM and EHMC and the CDs (HPβCD and SBEβCD). The inclusion complexes (RUT:HPβCD, RUT:SBEβCD, BMBM:HPβCD, BMBM:SBEβCD, EHMC:HPβCD and EHMC:SBEβCD) were obtained by the lyophilization method and quantified by high performance liquid chromatography (HPLC). The binary systems were characterized in solution, by solubility equilibrium method and in solid state, using differential scanning calorimetry (DSC), thermogravimetry (TG/DTG) and powder X-ray diffraction (P-XRD). The isolated substances and binary complexes were evaluated the photostability in solid state, and in solution. The increase in solubility (X mcg mL-1) was observed for the complexes RUT:HPβCD (4.13x); RUT:SBEβCD (4.38x); BMBM:HPβCD (43.3x); BMBM:SBEβCD (53.3x); EHMC:HPβCD (12.7x); and EHMC:SBEβCD (70.0x). The analysis of DSC, TG/DTG, and P-DRX indicated the formation of inclusion complexes for all systems, where the suppression of the endothermic events characteristic of the isolated substances were observed; however, in the BMBM complexes, the presence of free avobenzone was detected, suggesting that the complexation was not complete. The formation of inclusion complexes promoted the increase of photostability in all evaluated systems, as in solid state as in solution. The results reported in this study indicated that the complexation of photoprotective substances with (HPβCD e SBEβCD). may represent a promising strategy for increasing solubility and photostability.