Organic semiconductors combine the benefits of organic materials, i.e., low-cost production, mechanical flexibility, lightweight, and robustness, with the fundamental semiconductor properties light absorption, emission, and electrical conductivity. This class of material has several advantages over conventional inorganic semiconductors that have led, for instance, to the commercialization of organic light-emitting diodes which can nowadays be found in the displays of TVs and smartphones. Moreover, organic semiconductors will possibly lead to new electronic applications which rely on the unique mechanical and electrical properties of these materials. In order to push the development and the success of organic semiconductors forward, it is essential to understand the fundamental processes in these materials. This thesis concentrates on understanding how the charge transport in thiophene-based semiconductor layers depends on the layer morphology and how the charge transport properties can be intentionally modified by doping these layers with a strong electron acceptor. By means of optical spectroscopy, the layer morphologies of poly(3-hexylthiophene), P3HT, P3HT-fullerene bulk heterojunction blends, and oligomeric polyquaterthiophene, oligo-PQT-12, are studied as a function of temperature, molecular weight, and processing conditions. The analyses rely on the decomposition of the absorption contributions from the ordered and the disordered parts of the layers. The ordered-phase spectra are analyzed using Spano’s model. It is figured out that the fraction of aggregated chains and the interconnectivity of these domains is fundamental to a high charge carrier mobility. In P3HT layers, such structures can be grown with high-molecular weight, long P3HT chains. Low and medium molecular weight P3HT layers do also contain a significant amount of chain aggregates with high intragrain mobility; however, intergranular connectivity and, therefore, efficient macroscopic charge transport are absent. In P3HT-fullerene blend layers, a highly crystalline morphology that favors the hole transport and the solar cell efficiency can be induced by annealing procedures and the choice of a high-boiling point processing solvent. Based on scanning near-field and polarization optical microscopy, the morphology of oligo-PQT-12 layers is found to be highly crystalline which explains the rather high field-effect mobility in this material as compared to low molecular weight polythiophene fractions. On the other hand, crystalline dislocations and grain boundaries are identified which clearly limit the charge carrier mobility in oligo-PQT-12 layers. The charge transport properties of organic semiconductors can be widely tuned by molecular doping. Indeed, molecular doping is a key to highly efficient organic light-emitting diodes and solar cells. Despite this vital role, it is still not understood how mobile charge carriers are induced into the bulk semiconductor upon the doping process. This thesis contains a detailed study of the doping mechanism and the electrical properties of P3HT layers which have been p-doped by the strong molecular acceptor tetrafluorotetracyanoquinodimethane, F4TCNQ. The density of doping-induced mobile holes, their mobility, and the electrical conductivity are characterized in a broad range of acceptor concentrations. A long-standing debate on the nature of the charge transfer between P3HT and F4TCNQ is resolved by showing that almost every F4TCNQ acceptor undergoes a full-electron charge transfer with a P3HT site. However, only 5% of these charge transfer pairs can dissociate and induce a mobile hole into P3HT which contributes electrical conduction. Moreover, it is shown that the left-behind F4TCNQ ions broaden the density-of-states distribution for the doping-induced mobile holes, which is due to the longrange Coulomb attraction in the low-permittivity organic semiconductors. / Organische Halbleiter kombinieren die molekulare Vielfalt und Anpassbarkeit, die mechanische Flexibilität und die preisgünstige Herstellung und Verarbeitung von Kunststoffen mit fundamentalen Halbleitereigenschaften wie Lichtabsorption und -emission und elektrischer Leitfähigkeit. Unlängst finden organische Leuchtdioden Anwendung in den Displays von TV-Geräten und Smartphones. Für die weitere Entwicklung und den Erfolg organischer Halbleiter ist das Verständnis derer physikalischer Grundlagen unabdingbar. Ein für viele Bauteile fundamentaler Prozess ist der Transport von Ladungsträgern in der organischen Schicht. Die Ladungstransporteigenschaften werden maßgeblich durch die Struktur dieser Schicht bestimmt, z.B. durch den Grad der molekularen Ordnung, die molekulare Verbindung von kristallinen Domänen und durch Defekte der molekularen Packung. Mittels optischer Spektroskopie werden in dieser Arbeit die temperatur-, molekulargewichts- und lösemittelabhängigen Struktureigenschaften poly- und oligothiophenbasierter Schichten untersucht. Dabei basiert die Analyse der Absorptionsspektren auf der Zerlegung in die spezifischen Anteile geordneten und ungeordneten Materials. Es wird gezeigt, dass sich hohe Ladungsträgerbeweglichkeiten dann erreichen lassen, wenn der Anteil der geordneten Bereiche und deren molekulare Verbindung in den Schichten möglichst hoch und die energetische Unordnung in diesen Bereichen möglichst klein ist. Der Ladungstransport in organischen Halbleitern kann außerdem gezielt beeinflusst werden, indem die Ladungsträgerdichte und die elektrische Leitfähigkeit durch molekulares Dotieren, d.h. durch das Einbringen von Elektronenakzeptoren oder -donatoren, eingestellt werden. Obwohl der Einsatz dotierter Schichten essentiell für effiziente Leuchtdioden und Solarzellen ist, ist der Mechanismus, der zur Erzeugung freier Ladungsträger im organischen Halbleiter führt, derzeit unverstanden. In dieser Arbeit wird der Ladungstransfer zwischen dem prototypischen Elektronendonator P3HT und dem Akzeptor F4TCNQ untersucht. Es wird gezeigt, dass, entgegen verbreiteter Vorstellungen, fast alle F4TCNQ-Akzeptoren einen ganzzahligen Ladungstransfer mit P3HT eingehen, aber nur 5% dieser Paare dissoziieren und einen beweglichen Ladungsträger erzeugen, der zur elektrischen Leitfähigkeit beiträgt. Weiterhin wird gezeigt, dass die zurückgelassenen F4TCNQ-Akzeptorionen Fallenzustände für die beweglichen Ladungsträger darstellen und so die Ladungsträgerbeweglichkeit in P3HT bei schwacher Dotierung absinkt. Die elektrischen Kenngrößen Ladungsträgerkonzentration, Beweglichkeit und Leitfähigkeit von F4TCNQ-dotierten P3HT-Schichten werden in dieser Arbeit erstmals in weiten Bereichen verschiedener Akzeptorkonzentrationen untersucht.

<p>When the amorphous silicon (a-Si) dangling bonds are bonded to hydrogen the concentration of the dangling bond is decreased. The resulting film is called hydrogenated amorphous silicon (a-Si:H). The reduction in the dangling bonds concentration improves the optoelectrical properties of the film. The improved properties of a-Si:H makes it possible to manufacture electronic devices including a solar cell. A solar cell device based on the hydrogenated amorphous silicon (a-Si:H) was fabricated using the Hot-Wire Chemical Vapour Deposition (HWCVD). When an n-i-p solar cell configuration is grown, the norm is that the p-doped layer is deposited from a mixture of silane (SiH4) gas with diborane (B2H6). The boron atoms from diborane bonds to the silicon atoms and because of the number of the valance electrons, the grown film becomes a p-type film. Aluminium is a group 3B element and has the same valence electrons as boron, hence it will also produce a p-type film when it bonds with silicon. In this study the p-doped layer is grown from the co-deposition of a-Si:H from SiH4 with aluminium evaporation resulting in a crystallized, p-doped thin film. When this thin film is used in the n-i-p cell configuration, the device shows photo-voltaic activity. The intrinsic layer and the n-type layers for the solar cell were grown from SiH4 gas and Phosphine (PH3) gas diluted in SiH4 respectively. The individual layers of the solar cell device were characterized for both their optical and electrical properties. This was done using a variety of experimental techniques. The analyzed results from the characterization techniques showed the films to be of device quality standard. The analysed results of the ptype layer grown from aluminium showed the film to be successfully crystallized and doped. A fully functional solar cell was fabricated from these layers and the cell showed photovoltaic activity.<br /> &nbsp / </p>

Le carbure de silicium est l'un des semi-conducteurs les plus importants et les plus répandus dans les appareils électroniques de puissance. Du fait de la demande croissante d'électronique à haut rendement, bas coût et économe en énergie, il est nécessaire d'améliorer les propriétés des semi-conducteurs monocristallins. Cela demande une meilleure compréhension des phénomènes impliqués dans le procédé de croissance de ces matériaux. Cette thèse présentera de nouvelles perspectives sur deux sujets majeurs dans le domaine de la croissance en phase gazeuse de monocristaux de SiC. Dans un premier temps, le procédé de croissance utilisé dans notre laboratoire a été développé dans le but d'améliorer la qualité et la taille des cristaux de SiC obtenus. Une géométrie permettant la croissance sans contact et reproductible de monocristaux de SiC a été obtenue. La nucléation et la propagation des instabilités structurelles (inclusions de polytype étranger) apparaissant lors de la croissance ont été étudiés de façon continue. Deux critères spécifiques doivent être réunis pour qu'un polytype étranger puisse nucléer. Une fois le point de nucléation localisé, la propagation du polytype étranger dans le volume du cristal peut être appréhendée. Lorsque la stabilisation et déstabilisation des polytypes de SiC ont été mieux comprises, une tentative a été faite pour stabiliser la croissance du polytype 15R-SiC. L'objectif final, les paramètres de croissance susceptibles de renforcer la croissance préférentielle de 15R-SiC, a été mis en évidence. Enfin, l'incorporation d'azote pendant la croissance en phase gazeuse de monocristaux a été étudiée. En effet, aucune description détaillée n'existe pour l'incorporation d'azote dans le SiC, bien que ce soit le dopant le plus couramment utilisé. Notre contribution à cet effort porte sur l'étude de la concentration d'azote dans les cristaux obtenus en fonction de différents paramètres de croissance. Compte tenu des mécanismes d'adsorption/désorption à la surface de croissance, un effort a été fait pour expliquer les tendances obtenues expérimentalement. / Silicon Carbide is one of the most important and widely used semiconductors for power electronic devices. Due to the increasing demand for high efficiency, low cost and energy saving electronics, further improvement of the properties of single crystal semiconductors is needed. That requires a better understanding of the phenomena involved in the growth process of these materials. This thesis will bring some new insight into two main topics at the field of SiC bulk growth from the vapor phase. Initially, the growth process used in our laboratory was developed in order to improve the quality and the size of the grown SiC crystal. A geometry that allows the contactless and reproducible growth of SiC single crystals was obtained. Continuously, we investigated the nucleation and propagation of structural instabilities (foreign polytype inclusions) that appear during growth. Two specific criteria must be fulfilled for a foreign polytype to be nucleated. Once the nucleation point is located, the propagation of the foreign polytype in the volume of the grown crystal can be comprehended. Once the stabilization or destabilization of the SiC polytypes was better perceived, an attempt was made to stabilize the growth of the 15R-SiC polytype. As a final objective, the growth parameters that could preferentially enhance the growth of the 15R-SiC are highlighted. Last, nitrogen incorporation during bulk growth from the vapor phase was studied. Indeed as the most commonly used dopant, no full description exists for the incorporation of nitrogen in SiC. We contribute to this effort by exploring the nitrogen concentration in the grown crystals as a function of various growth parameters. Considering the adsorption/desorption mechanisms at the growing surface, effort was given to explain the experimentally obtained trends.

Molecular doping is a key technique for realizing high efficient organic light-emitting diodes (OLEDs) and photovoltaics (OPV). Furthermore, its most recent application in organic field-effect transistors (OFETs) marks a milestone on the roadmap towards flexible organic CMOS technology. However, in contrast to silicon based devices, the understanding of the fundamental processes of molecular doping is still controversially discussed. This work aims at the detailed analysis of the molecular doping process by employing Photoelectron spectroscopy (PES) on various doped thin-films prepared by co-evaporation in vacuum. Here, the focus is on explanation of the experimental findings by a statistical description in order to contribute to the fundamental understanding of the doping mechanism. First, the Fermi level shifts in thin-films of the common hole transport materials MeO-TPD, ZnPc, and pentacene p-doped by the acceptors C60F36 and F6-TCNNQ are studied. The precise control of molar doping ratios as low as 1e−5 is demonstrated, allowing analysis of the doping properties in a much broader range as previously accessible. Characteristic kinks and slopes in the Fermi level vs. doping concentration diagrams are found. Furthermore, the doping efficiency is found to decrease with increasing doping concentrations to just a few percent at molar ratios above 0.1. By numerically solving the charge neutrality equation using a classical semiconductor physics approach, these findings are explained by trap-limitation, dopant saturation, and reserve regimes as known from inorganic semiconductor physics. Using the example of p-doped MeO-TPD thin-films, it is finally demonstrated that the density of deep gap states depends on the purity degree of the host material. Similar studies are conducted on thin-films of C60, ZnPc, and pentacene n-doped by the di-metal complex W2(hpp)4. The corresponding Fermi level plots possess also host material specific kinks and slopes, which however, can be explained by application of the statistical doping description and assuming just dopant saturation and trap-limitation. Furthermore, it is demonstrated that electron traps with defined density can intentionally be introduced in pentacene by co-evaporation of C60 and gradually filled-up by n-doping with W2(hpp)4. In contrast to p-dopants, the highly efficient n-dopant W2(hpp)4 is prone to degradation in air due to its low IP of just 2.4eV. Therefore, the degradation of pure films of W2(hpp)4 as well as of n-doped films applying various host materials is studied under air exposure by conductivity measurements and PES. An unexpected (partial) passivation of W2(hpp)4 molecules against oxidation is found, however, this effect is identified to depend on the energy levels of the used host material. This finding is explained by a down-shift of the W2(hpp)4 energy levels upon charge transfer to a host material with deeper lying energy levels and thus allows for new conclusions on the relative alignment of the energy levels of dopant and host molecules in doped films in general. The maximum open-circuit voltage Voc of BHJ solar cells is limited by the effective HOMO(donor)-LUMO(acceptor) gap of the photo-active absorber blend. Therefore, the relative energy levels within ZnPc:C60 blend layers are furthermore investigated by PES, identifying an increase of the HOMO(ZnPc)-LUMO(C60) gap by 0.25 eV when varying the blend stoichiometry from 6:1 to 1:6. The trend in this gap correlates with observed changes in Voc of respective BHJ solar cells as well as with measured charge transfer energies. As physical origins for the changed energy levels, a suppressed crystallization of the C60 phase due to presence of donor molecules as well as concentration-dependent growth modes of the ZnPc phase are discussed.

No description available.

This thesis describes the in vitro production of drug metabolites using fungi of the Cunninghamella species. The metabolites were characterized with mainly liquid chromatography-mass spectrometry using ion-trap and quadrupole-time-of-flight instruments. A fungal in vitro model has several advantages e.g., it is easily up-scaled and ethical problems associated with animal-based models are avoided. The metabolism of bupivacaine and the selective androgen receptor modulators (SARMs) S1, S4 and S24 by the fungi Cunninghamella elegans and Cunninghamella blakesleeana was investigated. The detected metabolites were compared with those formed in vitro and in vivo by human and horse and most phase I metabolites formed by mammals were also formed by the fungi. The higher levels of bupivacaine metabolites in the fungal samples allowed an extensive mass spectrometric structural characterization which shows that the fungi are relevant metabolic models. Glucuronides are important drug metabolites but they are difficult to synthesize. The discovery that the fungus Cunninghamella elegans formed large amounts of glucosides led to the idea that they could be used to form glucuronides. A new concept was developed where a fungal incubate containing a SARM S1 glucoside was mixed with the free radical tetramethylpiperidinyl-1-oxy (TEMPO), sodium bromide and sodium hypochlorite which produced a glucuronide. Isolation and characterization by nuclear magnetic resonance spectroscopy proved that the new method could produce glucuronides for use as reference material. An investigation of reactive metabolite formation of the drugs paracetamol, mefenamic acid and diclofenac by the fungus Cunninghamella elegans was performed. It was demonstrated for the first time that the fungus could produce glutathione, glutathione ethyl-ester, cysteine and N-acetylcysteine conjugates that are indicative of a preceding formation of reactive intermediates. A comparison with conjugates formed by human liver microsomes showed that both models formed identical metabolites. The presented investigations prove that Cunninghamella fungi are relevant drug metabolism models. They show that the fungi to a large extent forms the same metabolites as mammals and that they can produce metabolites for use as reference material in, e.g. doping control. It was also demonstrated that the fungal model can be used in the important assessment of drug toxicity.

This document describes work performed related to the determination of how elemental additions affect the interfacial fracture toughness of thermal barrier coatings at the bond coat/thermally grown oxide interface in gas turbines. These turbines are exposed to cyclical thermal loading, therefore a simulation was designed to model this interface in a temperature cycle between 200 K and 1000 K that included oxide growth between 2 μm and 27 μm. The fracture toughness of this interface was then determined to elucidate the function of elemental additions. It was shown that minimal concentrations of atomic species, such as hafnium and yttrium cause notable increases in the toughness of the bond coat/thermally grown oxide interface, while other species, such as sulphur, can dramatically reduce the toughness. Furthermore, it was shown that, contrary to some empirical results, the addition of platinum has a negligible effect on the fracture toughness of this interface.

A novel dislocation locking technique is used to study the behaviour of nitrogen and oxygen in silicon. Specimens containing well-defined arrays of dislocation half-loops are subjected to isothermal anneals of controlled duration, during which nitrogen or oxygen diffuses to the dislocations. The stress required to move the dislocations away from the impurities is then measured. Measurement of this unlocking stress as a function of annealing time and temperature allows information on the transport of nitrogen and oxygen to be deduced. Despite being present in a concentration of just 3E14cm-3 in some specimens, nitrogen is found to provide substantial benefits to the mechanical properties of float-zone silicon (FZ-Si). The segregation of nitrogen at dislocations is stable to at least 1200 degrees centigrade and the unlocking stress measured at 550 degrees centigrade is of similar magnitude to that found previously for oxygen in Czochralski silicon (Cz-Si). The unlocking stress initially rises linearly with annealing time, before it takes a constant value. The rate of the initial rise is dependent on temperature and the 1.5eV activation energy found agrees with that found previously. The rate of the initial rise also depends on nitrogen concentration. In the 500 to 700 degrees centigrade temperature range, the unlocking stress is found to decrease linearly as the temperature at which the unlocking process takes place increases. The results of a pre-annealing experiment confirm that oxygen monomers and dimers in Cz-Si exist in thermodynamic equilibrium at 550 degrees centigrade. Numerical simulation of oxygen diffusion to dislocations allows values of the effective diffusivity of oxygen in Cz-Si with four different oxygen concentrations to be deduced. At 500 degrees centigrade, the effective diffusivity depends upon oxygen concentration in a way which is consistent with oxygen dimers being responsible for transport. The transport of oxygen in Cz-Si at 550 to 600 degrees centigrade is found to be unaffected by nitrogen doping at a level of 2.1E15cm-3. The dislocation locking technique has also been used to study the effect of high concentrations of shallow dopants on oxygen transport in Cz-Si in the 350 to 550 degrees centigrade temperature range. Oxygen transport has been found to be unaffected by a high antimony concentration ~3E18cm-3, but is found to be enhanced by, on average, a factor of approximately 44 in Cz-Si with a high boron concentration ~5E18cm-3. Furthermore, deep-level transient spectroscopy (DLTS) and high-resolution DLTS (HR-DLTS) are used to study the electrical activity of defects in silicon. A deep-level with an enthalpy of 0.50eV and a concentration of order 10E11cm-3 is found in n-type nitrogen-doped FZ-Si and n-type nitrogen-doped neutron transmutation doped FZ-Si. No additional deep-levels are found in either material, for which the detection limit is 6E10cm-3. No deep-levels are found in p-type nitrogen-doped Cz-Si, for which the detection limit is approximately 10E12cm-3. DLTS and HR-DLTS are also used to investigate the electrical activity of oxygen-decorated dislocations in Cz-Si and states associated with oxygen at dislocation cores have been identified.

Les matériaux conjugués sont de nos jours très utilisés dans de nombreuses applications ainsi qu’en recherche. L’enchainement des liaisons π-σ-π permet la délocalisation des électrons et d’obtenir différentes propriétés comme la conduction, la fluorescence, la chélation, etc. Ainsi, de nombreux dispositifs utilisent ces caractéristiques en vue d’obtenir de nouveaux matériaux révolutionnaires comme les cellules solaires, les transistors à effet de champs, les dispositifs électrochromiques, etc.. Les dispositifs électrochromiques font partie des dispositifs en vogue. Ils sont capables de changer de couleur selon le potentiel électrique appliqué. Ils se distinguent par la simplicité du mode de conception et ils ne nécessitent pas de fonctionner dans des conditions drastiques comme une atmosphère contrôlée. Ces dispositifs sont actuellement utilisés et commercialisés comme fenêtre intelligente, camouflage, papier électronique et carte de visite personnalisée pour n’en nommer que quelques-uns. Deux propriétés sont essentielles pour que des composés puissent être utilisés dans ces familles de dispositifs : la réversibilité à l’oxydation et la stabilité à l’air et à la lumière. Dans le groupe de recherche du professeur W.G. Skene, l’axe principal de recherche est basé sur la conception de nouveaux matériaux conducteurs comportant des liaisons azométhines. Les principaux matériaux étudiés sont des dérivés de thiophènes et de fluorènes. De précédents résultats ont montré que plusieurs produits issus de la réaction de condensation entre les dérivés du 2,5-diaminothiophène et de thiophènes diformylés menaient à des produits possédant d’excellentes propriétés photophysiques et électrochimiques. C’est en partant de ces résultats encourageants qu’il a été choisi de synthétiser une nouvelle famille de produits avec un nouveau substrat fonctionnalisé. Ce dernier possède d’excellentes propriétés électrochimiques et photophysiques : la triphénylamine. Deux familles de produits ont été synthétisées qui possèdent toutes comme cœur une triphénylamine. Cette dernière a été modifiée de façon à créer une, deux ou trois liaisons azométhines avec différents thiophènes. Deux dérivés du thiophène ont été choisis afin d’étudier l’influence des groupements donneurs et accepteurs sur ces nouveaux types de composés encore jamais étudiés. Les résultats des différentes synthèses et analyses ont été effectués par RMN, spectrométrie de masse, spectrométrie d’absorbance UV-Visible, fluorescence et voltampérométrie cyclique sont rapportées dans le présent recueil. / Conjugated materials are been used in many applications and fundamental research, owing in part to their high degree of conjugation. They further have opto-electronic properties that are compatible for use as conjugated materials in many devices including solar cells, organic field effect transistors, organic light emitting diodes and electrochromic devices. The latter are of particular interest because their colors that can be changed when a potential is applied. The advantage of these color switching materials compared to other opto-electronic devices is their simple fabrication that can be done under ambient conditions. Electrochromic devices have found many consumer applications including mirrors, tunable windows, camouflage and electronic paper, to name a few examples. The focus of our research group is the preparation of new conjugated materials based on azomethine. Previous efforts from the group demonstrated that azomethines having the required properties for use in electrochromic devices (electrochemical reversibility and air stability) were possible when using a 2,5-diaminothiophene derivative as a building block. It was also demonstrated that color tuning of both the neutral and oxidized states was possible when coupling 2,5-diaminothiophene with various heterocyclic arylaldehydes. Despite the many examples of azomethines studied in our group, fundamental structure-property relationships of these conjugated materials are still not understood. The objective of this thesis was therefore to prepare to new conjugated azomethines from triarylamine aldehydes. The objective was also to examine the opto-electronic properties of these novel azomethines, including the effect of the degree of conjugation and type of triphenylamine aldehyde precursor on the absorbance, electrochemical properties, and fluorescence.

P-xylene-bis(diethylsulphonium chloride) (PXBDC) monomer was synthesized by the reaction of &amp / #945 / ,&amp / #945 / -dichloro-p-xylene with tetrahydrothiophene or diethyl sulphide. Electrochemical behavior of this monomer (PXBDC) was examined by cyclic voltametry. Polymerization was achieved both by using electrochemical and chemical polymerization techniques. In the electrochemical technique, PPV was synthesized by constant potential electrolysis in acetonitrile-tetrabutylammonium tetrafluoroborate (TBAFB) solvent-electrolyte couple. The polymer obtained from the electrode surface was converted to the poly(p-phenylene vinylene) (PPV) by the thermal elimination reaction of diethyl sulphide and HCl. Also, PPV was doped via electrochemical doping with ClO4- dopant ion. The chemical structures were confirmed both by Nuclear Magnetic Resonance Spectroscopy (NMR) and Fourier Transform Infrared Spectroscopy (FTIR). The thermal behavior of chemically and electrochemically synthesized conducting polymers were investigated by Differential Scanning Calorimetry (DSC). Also, electrochromic and spectroelectrochemical properties of PPV was investigated by using UV-VIS spectrophotometer.