No description available.

The electrical and optical properties of boron doped hydrogenated amorphous silicon thin films (a-Si) were investigated to determine the effect of boron and hydrogen incorporation on carrier transport. The a-Si thin films were grown by plasma enhanced chemical vapor deposition (PECVD) at various boron concentrations, hydrogen dilutions, and at differing growth temperatures. The temperature dependent conductivity generally follows the hopping conduction model. Above a critical temperature, the dominant conduction mechanism is Mott variable range hopping conductivity (M-VRH), where p = ¼, and the carrier hopping depends on energy. However, at lower temperatures, the coulomb interaction between charge carriers becomes important and Efros-Shklosvkii variable hopping (ES-VRH) conduction, where p=1/2, must be included to describe the total conductivity. To correlate changes in electrical conductivity to changes in the local crystalline order, the transverse optical (TO) and transverse acoustic (TA) modes of the Raman spectra were studied to relate changes in short- and mid-range order to the effects of growth temperature, boron, and hydrogen incorporation. With an increase of hydrogen and/or growth temperature, both short and mid-range order improve, whereas the addition of boron results in the degradation of short range order. It is seen that there is a direct correlation between the electrical conductivity and changes in the short and mid-range order resulting from the passivation of defects by hydrogen and the creation of trap states by boron. This work was done under the ARO grant W911NF-10-1-0410, William W. Clark Program Manager. The samples were provided by L-3 Communications.

Pour étendre l'utilisation des composites dans des applications plus variées (applications intelligentes et multifonctionnelles), l'une des barrières est leur faible conductivité électrique et thermique. Dans le cas de composites renforcés par des fibres de carbone, la matrice organique est responsable des propriétés isolantes du composite résultant. L'une des solutions pour améliorer les conductivités des matériaux est l'utilisation des nanocharges conductrices. L'amélioration des propriétés électriques et thermiques des polymères nanochargés est une problématique récurrente dans la littérature. Cependant, étudier les propriétés des composites à fibre de carbone continue et nanochargés est moins abordée. Ce travail porte sur la fabrication et la caractérisation des composites nanochargés par du noir de carbone et des nanotubes de carbone. Tout d'abord, un intérêt particulier a été accordé à la phase délicate de la fabrication. Comme mentionné ci-dessus, la mise en œuvre des composites à renfort continu et matrice nanochargée implique des problèmes liés à l'agglomération et à la dispersion inhomogène des nanocharges dans le composite final. Pour résoudre ces problèmes, le choix de la matrice thermoplastique (Polyamide 6) était judicieux. En fait, la dispersion des nanocharges a été faite par extrusion bi-vis qui est connue comme l'une des voies les plus efficaces de séparation d'agglomérats. De plus, la méthode de fabrication à base de films de Polyamide 6, appelée film stacking, assure une partition homogène dès le début du processus. Des observations MEB ont été effectuées pour localiser les nanoparticules. Ceux-là ont montré que les particules pénétraient dans la zone des fibres. En effet, en atteignant le cœur des torons, les nano-charges ont créé un réseau de connectivité entre les fibres pour le passage de courant. Ceci explique l'amélioration constatée de la conductivité électrique des composites en présence de noir de carbone et des nanotubes de carbone. Ces essais ont été réalisés avec la méthode à 4 points. La conductivité électrique du composite à matrice « pure » est passée de 20S / cm à 80S / cm en ajoutant 8% en poids de noir de carbone et à 15S / cm en ajoutant 18% en poids de la même charge nanométrique. Pour les nanotubes de carbone, avec 2,5% en poids, la conductivité était d'environ 150S / cm. Pour les propriétés thermiques, des tests basés sur l'effet Joule ont été réalisés. L'augmentation de la température a été enregistrée en utilisant une caméra IR. Les résultats obtenus sont en accord avec ceux de la conductivité électrique, montrant une amélioration du comportement thermique en présence de nanocharges. Grâce à ces résultats, l'utilisation de ces composites comme outil de suivi d’endommagement était possible. Par ailleurs, la méthode de variation de la résistance électrique a été effectuée. Les matériaux nanochargés ont montré une meilleure sensibilité aux endommagements. Les résultats ont été comparés aux outils classiques de suivi d’endommagement. A la fin, plusieurs applications « intelligentes » ont été testées telles que : le composite à gradients de propriétés et des matériaux nanochargés cousus. / To extend the use of composites in more varied application (smart applications, multifunctional issues), one of the actual barrier is their poor electrical and thermal conductivities. In the case of carbon fiber reinforced composites, organic matrix are in charge of the insulating properties of the resulting composite. One of the solutions to enhance conductivities of materials is the use of conductive nanofillers. Improving the electrical and thermal properties of nanofilled polymers has been investigated in several studies. However, studiing the properties of continuous carbon fiber nano-filled composites is less approached. This work tends to fabricate and characterize carbon black and carbon nanotubes nano-filled composites. First of all, special interest was given to the delicate phase of manufacturing. As mentioned before, processing continuous fiber reinforced nanofilled polymers implies issues related to nanofillers agglomeration and inhomogeneous dispersion in the final composite. To resolve these problems, the choice of the thermoplastic (Polyamide6) matrix seemed preferable. In fact, the dispersion of nanofillers was made by twin screw extrusion which is known as one of the most effective agglomeration separation ways. Adding to this, the fabrication method based on Polyamide 6 shects called film stacking, ensure a homogeneous partition at the beginning of the process. SEM observations were performed to localize the nano-particles. It showed that particles penetrated on the fiber zone. In fact, by reaching the fiber zone, the nano-fillers created network connectivity between fibers which means an easy pathway for the current. It explains the noticed improvement of the electrical conductivity of the composites by adding carbon black and carbon nanotube. This test was performed with the 4 points electrical circuit. It shows that electrical conductivity of 'neat' matrix composite passed from 20S/cm to 80S/cm by adding 8wt% of carbon black and to 15S/cm by adding 18wt% of the same nano-filler. For carbon nanotubes, with '2.5wt% the conductivity was around 150S/cm. For the thermal properties, tests based on Joule's effect were performed. The rise of temperature was recorded using IR camera. Results obtained are in agreement with the electrical conductivity ones, showing enhancement of the thermal behavior in presence of nanofillers. Thanks to these results, the use of these composites as a damage-monitoring tool was possible. By the way, the electrical resistance change method was performed. Nanofilled materials showed better sensitivity to damage. Results were compared with classical damage monitoring tools. At the end, several 'smart' applications were tested such as graded functionalities composite and stitched nanofilled materials.

Orientador: Maria Helena Moraes / Banca: Roberto Lyra Villas Bôas / Banca: Itamar Andrioli / Banca: Ricardo Ralish / Banca: Itamar Rosa Teixeira / Resumo: O presente trabalho teve como objetivo avaliar o efeito da utilização de adubos orgânicos, produzidos por diferentes processos de reciclagem de dejetos bovinos criados em sistema de confinamento para novilhos superprecoces, nos atributos químicos e físicos de um LATOSSOLO VERMELHO Distrófico e na produtividade da cultura do milho. O experimento foi conduzido por duas safras agrícolas, 2002/2003 e 2003/2004. Utilizou-se o delineamento experimental em blocos casualizados com quatro repetições e seis tratamentos: T1 = efluente de biodigestor; T2 = esterco de esterqueira; T3 = composto orgânico; T4 = vermicomposto; T5 = adubo mineral; T6 = testemunha (sem utilização de adubos). As parcelas possuíam 15 m de comprimento por 8 m de largura, com área total de 120 m2. As quantidades para cada fonte orgânica foram calculadas com base nos seus teores de nitrogênio, para aplicação de 120 kg ha-1 de N. No tratamento T5 utilizou-se uma formulação N-P2O5-K2O, com base na análise do solo para P e K, e também 120 kg ha-1 de N, dos quais 30 kg foram aplicados na base e o restante em cobertura, em uma única aplicação, aos 33 e 37 dias após a emergência das plantas, na primeira e segunda safra, respectivamente. Os adubos orgânicos foram incorporados ao solo por meio de uma gradagem, antes da semeadura. O milho, cv. híbrido DKB 350 foi semeado dia 6 de janeiro de 2003 na primeira safra, e no dia 26 de dezembro de 2003 na segunda safra, com espaçamento de 90 cm entre linhas, e população de 55000 plantas por hectare. Os atributos do solo foram avaliados nas camadas de 0-0,10 e 0,10-0,20 e 0,20-0,30 m. Os atributos físicos avaliados foram o diâmetro médio ponderado, a argila dispersa em água, a resistência à penetração, a condutividade hidráulica saturada, a densidade do solo, porosidade total, macro e microporosidade...(Resumo completo, clicar acesso eletrônico abaixo) / Abstract: The present work had as its aim to evaluate the effect of cattle manure usage, produced by different processes of bovine dejections recycling raised in pen system for superprecocious steers in the chemical and physical properties of a distrophyc Red Oxisol and in the maize productivity. The experiment was carried out by two crop harvests 2002/2003 and 2003/2004. A completely randomized block design was used with four replications and six treatments: T1 = biodigestor effluent; T2 = cattle manure; T3 = organic composition; T4 = vermicompost; T5 = mineral fertilizer; T6 = witness (without fertilizer application). The parcels were 15 meters long and 8 meters wide, with a total area of 120 square meters. The amounts for each organic source had been calculated based on their nitrogen concentration, for a N application of 120 kg ha-1. In T5 treatment, a N-P2-O5-K2O formula was used, based on the soil analysis for P and K, and also 120 kg ha-1 of N, of which 30 kg were applied in the base and the rest in the covering, in a single application, at 33 and 37 days after the plant emerging, in the first and second harvests, respectively. The organic matter had been incorporated to the soil by grading, before sowing. The maize, cv. Hybrid DKB 350 was sown in January 6th, 2003 in the first harvest and in December 26th, 2003 in the second harvest, with a distance of 90 cm between the lines and a population of 55,000 plants per linear meter. The soil attributes were evaluated in the 0-0,10 and 0,10-0,20 and 0,20-0,30 layers. The evaluated physical attributes were the mean weighed diameter, the water dispersed clay, the penetration resistance, the saturated hydraulic conductivity, the soil bulk density, total porosity, macro and microporosity. Concerning the chemical attributes, the fractioned organic matter, macro and micronutrients, pH... (Complete abstract, click eletronic address below) / Doutor

No description available.

Darbo tikslas- įvertinti karvių bandos sergamumą mastitais, prieš įdiegiant automatizuotą melžimo sistemą ir po įdiegimo, kaip keitėsi pieno sudėties, kokybės rodikliai, bei ištirti pieno elektrini laidumą. Tyrimas atliktas ūkyje „x“ 2011- 2013 metų laikotarpyje. Surinkti pieno SLS, BBS, riebalų, baltymų, laktozės, urėjos duomenys iš 3-6m. amžiaus laktuojančių karvių melžiant į liniją ir pradėjus melžti „Lely Astronaut“ melžimo robotu, bei surinkti AMS duomenys apie pieno EL. Pieno sudėties bei kokybės tyrimai atlikti VĮ “Pieno tyrimai” laboratorijoje. Nustatyti dažniausi karvių mastito sukėlėjai ūkyje. / The objective of this work is to assess the incidences of mastitis in the herd and to evaluate milk composition, quality indicators, and the milk electrical conductivity before and after an installation of an automated milking system. The study was conducted in the farm "x" during the year period from 2011 to 2013. During this study, milk SCC, TBC, fat, protein, lactose, and urea data of lactating cows from 3 to 6 years old was collected. The milk was firstly collected by using a pipeline milking system and later by using a “Lely Astronaut” robotic milking system (AMS). Data about the milk electric conductivity was collected from the AMS. Milk composition and quality research was performed by the State Enterprise “Pieno tyrimai” laboratory. The most common causes of mastitis were identified in the farm.

Orientador: Fernando Braz Tangerino Hernandez / Resumo: A ocorrência de geadas nas pastagens causa perdas de alimento para os animais, reduzindo a produção de leite e carne. Existe uma diversidade de espécies forrageiras com grande potencial produtivo e ampla adaptação térmica, que podem ser cultivadas em áreas de risco desse fenômeno. No entanto é necessário caracterizar a tolerância dessas espécies a baixas temperaturas e as regiões com condições climáticas adequadas. Os métodos de avaliação de danos por baixas temperaturas são predominantemente qualitativos, baseados em critérios visuais que têm o viés da subjetividade. Esta tese teve como objetivos determinar as temperaturas mínimas de início de danos para sete espécies forrageiras e efetuar o zoneamento de risco de geadas para o estado do Paraná. Foram incluídas no estudo as forrageiras: Alfafa (Medicago sativa), Sorgo (Sorghum bicolor), Aveia Preta (Avena strigosa), Brachiaria brizantha cv. Marandu, Milheto (Pennisetum glaucum), capim Mombaça (Panicum maximum) e Tifton 85 (Cynodon spp). As plantas foram conduzidas em vasos em casa de vegetação até 60 dias e submetidas a baixas temperaturas no interior de uma câmara de crescimento com condições de luminosidade e temperatura controladas, atingindo valores mínimos de 0,2 -0,9, -1,8, -2,7, -4,1, -4,6 e -6,2oC, durante uma hora. Foram realizadas avaliações quantitativas pós testes de fluorescência da clorofila, condutividade elétrica de solução embebida com discos de folhas e atividade das enzimas ascorbato peroxidase (APX), cata... (Resumo completo, clicar acesso eletrônico abaixo) / Doutor

Made available in DSpace on 2014-12-17T14:17:54Z (GMT). No. of bitstreams: 1 MirellaCSA_DISSERT.pdf: 648930 bytes, checksum: 06627ea14cbf2543775d82cecd4ee6ec (MD5) Previous issue date: 2014-03-21 / Coordena??o de Aperfei?oamento de Pessoal de N?vel Superior / Mimosa caesalpiniaefolia Benth. is a forest species of the Mimosaceae family, recommended for recovery of degraded areas. The evaluation of vigor by biochemical tests have been an important tool in the control of seed quality programs, and the electrical conductivity and potassium leaching the most efficient in the verifying the physiological potential. The objective, therefore, to adjust the methodology of the electrical conductivity test for seeds of M. caesalpiniaefolia, for then compare the efficiency of this test with the potassium in the evaluation of seed vigor of different lots of seeds M. caesalpiniaefolia. To test the adequacy of the electrical conductivity were used different combinations of temperatures , 25 ?C and 30 ?C, number of seeds , 25 and 50, periods of imbibition , 4 , 8 , 12 , 16 and 24 hours , and volumes deionized water, 50 mL and 75mL. For potassium leaching test, which was conducted from the results achieved by the methodology of the adequacy of the electrical conductivity test, to compare the efficiency of both tests , in the classification of seeds at different levels of vigor, and the period 4 hours also evaluated because the potassium leaching test can be more efficient in the shortest time . The best combination obtained in experiment of electrical conductivity is 25 seeds soaked in 50 mL deionized or distilled water for 8 hours at a temperature of 30 ? C. Data were subjected to analysis of variance, the means were compared with each other by F tests and Tukey at 5 % probability, and when necessary polynomial regression analysis was performed. The electrical conductivity test performed at period eight hour proved to be more efficient in the separation of seed lots M. caesalpiniaefolia at different levels of vigor compared to the potassium test / Mimosa caesalpiniaefolia Benth. ? uma esp?cie florestal pertencente ? fam?lia Mimosaceae, recomendada para recomposi??o de ?reas degradadas. A avalia??o do vigor por meio de testes bioqu?micos tem sido importante ferramenta dentro de programas de controle de qualidade de sementes, sendo os testes de condutividade el?trica e lixivia??o de pot?ssio um dos mais utilizados na verifica??o do potencial fisiol?gico. Objetivou-se, portanto, adequar a metodologia do teste de condutividade el?trica para sementes de M. caesalpiniaefolia, para ent?o comparar a efici?ncia deste teste com o de lixivia??o de pot?ssio na avalia??o de vigor das sementes dos diferentes lotes de M. caesalpiniaefolia. Para o teste de adequa??o da condutividade el?trica foram utilizadas diferentes combina??es de temperaturas, 25 e 30 ?C, de n?mero de sementes, 25 e 50, de per?odos de tempo de embebi??o, 4, 8, 12, 16 e 24 horas, e de volumes de ?gua deionizada, 50 e 75 mL. Para o teste de lixivia??o de pot?ssio, que foi realizado a partir dos resultados alcan?ados pela metodologia da adequa??o do teste de condutividade el?trica, p?de-se comparar a efici?ncia de ambos os testes, na classifica??o dos lotes das sementes em diferentes n?veis de vigor, sendo o per?odo de 4 horas tamb?m avaliado devido o teste de lixivia??o de pot?ssio poder ser mais eficiente em menor espa?o de tempo. A melhor combina??o obtida no experimento de adequa??o da condutividade el?trica ? a combina??o de 25 sementes embebidas em 50 mL de ?gua deionizada durante 8 horas a uma temperatura de 30 ?C. Os dados foram submetidos ? an?lise de vari?ncia, as m?dias comparadas entre si pelos testes F e de Tukey a 5% de probabilidade, e quando necess?rio foi realizada an?lise de regress?o polinomial. O teste de condutividade el?trica realizado no per?odo de oito horas mostra ser mais eficiente na separa??o de lotes de sementes de M. caesalpiniaefolia em diferentes n?veis de vigor comparativamente ao teste de lixivia??o de pot?ssio

Sura sulfatjordar (SSJ) bildas på tidigare havsbottnar med sulfidhaltiga sediment som med landhöjningen har lyfts upp ur havet och genom grundvattensänkande aktiviteter  exponerats för syre. Vörå å är ett vattendrag  i västra Finland som är kraftigt SSJ-påverkat. Närings-, trafik- och miljöcentralen i Österbotten har gjort vattenmätningar i Vörå å i flera decennier och syftet med detta arbete var att strukturera, beskriva och tolka tidigare obehandlade data från vattenmätningar som gjorts mellan 1969 och 2017 och därmed synliggöra årstidsvariationer och förändringar i vattnets kemiska sammansättning över tid. Vattenkvaliteten i Vörå å var allra sämst under höst och vår: pH <5, höga sulfathalter och konduktivitet om 25–100 mS/m.  Suspenderat material och turbiditet var som högst i april medan pH, konduktivitet, järnhalt och COD var som högst under sommaren. Variationerna i vattnets kemiska sammansättning var minst under våren och störst under sommaren då flera variabler uppvisade en mycket stor spridning. I slutet av mätperioden uppvisade många variabler en liten bättring och vad denna beror på är oklart. I och med klimatförändringar har årsmedeltemperaturerna i Finland stigit vilket skulle kunna tänkas påverka tiden för högflöden. Det finns tecken i datan som tyder på sådana förändringar sedan 1970-talet. Metallmätningar som gjorts under 2000-talet jämfördes mot bakgrundsvärden, vissa uppvisade förhöjda värden. / Acid sulphate soils (ASS) form in sulphide bearing marine sediments that have been exposed to atmospheric oxygen caused by eustatic uplift and draining of cultivated fields. The river Vörå å, in western Finland, is a small stream that is severely affected by ASS. Finnish authorities have during decades sampled and analysed the water, but the data has not been interpreted. The objective of this study was to structure, describe and interpret previously untreated analyses data of the water samples from the years 1969 to 2017. Wa-ter quality was in general very bad and the worst situations occurred during springs and late autumns with pH <5, high sulphate concentrations and EC between 25–100 mS/m. Suspended solids and turbidity peaked in April while pH, EC, iron concentration and COD were highest during the summer. The variations in the chemical composition of the water were lowest during the spring and most widespread during the summer. At the end of the measurement period, many variables showed a slight improvement, the reason for this is unclear. Due to climate change the mean temperatures in Finland have increased, this may possibly affect the timing for snow melt in the spring and the time for flooding during the autumn. There are signs in the data indicating such changes. Metal concentra-tions from samples collected since 2005/2010 were compared with regional background values. Some metals demonstrated high concentrations.

Submitted by Marco Antonio Oliveira da Silva (maosilva@ipen.br) on 2016-12-21T16:28:43Z No. of bitstreams: 0 / Made available in DSpace on 2016-12-21T16:28:43Z (GMT). No. of bitstreams: 0 / O titanato de estrôncio (SrTiO3) possui estrutura cristalina do tipo perovsquita. Materiais com este tipo de estrutura são utilizados para diversas aplicações, tais como, sensores, atuadores, em células a combustível de óxido sólido, entre outros. Devido as suas interessantes propriedades físicas, o SrTiO3 vem sendo intensamente estudado, em especial com a introdução de dopantes. Portanto, neste trabalho foi investigada a influência de diferentes teores de Ca (1; 2,5 e 5% mol) e Pr (0,025; 0,050; 0,075 e 1% mol) na microestrutura e propriedades elétricas e dielétricas do SrTiO3, assim como o material sem aditivos (puro). Os resultados mostram que após a sinterização do SrTiO3 puro, a microestrutura consiste de grãos poligonais com tamanho médio micrométrico, além de texturas lisas e rugosas. A condutividade elétrica das amostras sintetizadas sinterizadas a 1450 e 1500ºC é máxima para 2 horas de patamar. Apenas as amostras de SrTiO3 contendo 1% em mol de Ca apresentam fase única. O tamanho médio de grãos das amostras contendo 1% em mol de Ca é 10,65 ± 0,28 µm e para teores acima deste valor ocorre crescimento significativo dos grãos. As medidas de condutividade elétrica mostraram que as amostras contendo a adição de 1% em mol de Ca possuem maior condutividade dos grãos em relação ao material puro. Para as amostras contendo teores de até 0,075% mol de Pr, pode-se observar alguns grãos lisos e outros rugosos e não há variação considerável do tamanho médio de grãos. As amostras contendo menor teor de Pr (0,025% mol) apresentam maior condutividade dos grãos e contornos de grãos. As amostras de SrTiO3 sintetizado sinterizadas a 1450ºC/10 h apresentaram permissividade elétrica colossal em temperatura ambiente em altas frequências. / Dissertação (Mestrado em Tecnologia Nuclear) / IPEN/D / Instituto de Pesquisas Energéticas e Nucleares - IPEN-CNEN/SP