Global ETD Search

181	School Climate: A Comparison of Teachers, Students, and Parents Jacobs, James A 01 August 2018 (has links) This study was designed to examine the benefits of positive school climate and to measure the perceptions of school climate for intermediate grades in a Northeast Tennessee School district. An online school climate survey was used to collect responses from participants in intermediate grades and focused on the 3 major components of school climate: school engagement, school environment, and school safety. Data were collected for 2 consecutive years in 2016-2017 and 2017-2018. Response totals included 1,955 student responses, 116 teacher responses, and 210 parent responses that were analyzed and used for this study. Of the student totals, some students that were in 5th grade in 2016-2017 may have completed the survey again as 6th graders in 2017-2018. Findings indicated that there were no significant difference in the perceptions of students, parents, and teachers in school climate over a 2-year span for this district. Research indicates there are multiple benefits to a positive school climate, including higher academic achievement, lower chronic absenteeism, and a decrease in discipline referrals. School Climate School Engagement School Environment School Safety Curriculum and Instruction Curriculum and Social Inquiry Educational Leadership Educational Methods Educational Psychology Elementary Education Elementary Education and Teaching Gifted Education Health and Physical Education Language and Literacy Education Liberal Studies Other Education Scholarship of Teaching and Learning Science and Mathematics Education Secondary Education Secondary Education and Teaching Special Education Administration Urban Education
182	A Collaborative Approach to Address Student Behavior and Academic Achievement across Systems Okereke, Beverly Ngozi 01 September 2016 (has links) Academic achievement and in-classroom behaviors are two significant child outcomes that affect student success in school. According to Systems Theory, in order to truly understand the factors that affect these outcomes for children, one must look to the major systems that encapsulate the child (including their school and home environments). This project is a meta-analytic review that examined the effectiveness of measures representing each system in predicting child achievement and behavior: School-Wide Positive Behavior Supports (SWPBS) for the school as a system, level of parent involvement (high versus low) for the home system, and student motivation (intrinsic versus extrinsic) for the child system. Archival research was used to examine children who attended K-12 schools in various Westernized countries. A total of 15 studies were examined to compute the effect sizes which were combined to examine the relative strength of each factor on the two outcome variables. For academic achievement, it was found that effect sizes were very large for SWPBS (0.768) and student motivation (0.807), and were large (0.589) for parent involvement. For behavior, SWPBS was associated with a very large effect size (-0.780). In other words, SWPBS is strongly associated with both increased academic achievement and decreased problem behavior, whereas parent involvement and student motivation are strongly associated with increased academic achievement. A suggested systems approach including the school counselor is proposed that meshes the effects of these three child systems into a more fluid, collaborative model that address child academic achievement and behavioral concerns. systems theory behavior achievement Schoolwide Positive Behavior Supports motivation parent involvement Applied Behavior Analysis Child Psychology Counseling Counseling Psychology Counselor Education Developmental Psychology Education Educational Leadership Elementary Education and Teaching Psychology School Psychology Secondary Education and Teaching Social and Behavioral Sciences
183	Teacher Perceptions of Blended Learning to Support 21st Century Learners Hensley, Nikki 01 December 2020 (has links) The purpose of this qualitative study was to understand teacher perceptions of blended learning as an instructional methodology for addressing the needs of diverse learners. The researcher explored the perceptions of teachers who were participating in an ongoing professional development program within their school district. This program focused on improving teaching and learning through the implementation of a blended learning approach. The researcher examined the experiences of teachers as they learned to adapt pedagogical practices to address the learning needs of 21st century students through blended learning. The researcher sought to gain a better understanding of how teachers perceived that utilizing a blended learning methodology impacted pedagogical beliefs, practices, and student learning. Based on the research questions guiding this study, data was collected from individual, in-depth interviews with fifteen educators. Twelve participants were classroom teachers and three participants were school administrators. The analysis of this data identified the following commonalities regarding teacher perceptions of blended learning as an instructional methodology for addressing the needs of diverse learners: knowledge and understanding of effective instructional practices, enhancing instruction with the strategic use of technology, personalizing learning, technology-enabled assessments to support instruction, engaging and empowering learners, and relevant professional development and support. These results can benefit educators in adapting effective instructional practices to reach all learners. blended learning differentiated instruction strategic use of technology innovative change professional development K-12 education Curriculum and Instruction Disability and Equity in Education Educational Leadership Educational Methods Educational Technology Elementary Education and Teaching Instructional Media Design Online and Distance Education Secondary Education and Teaching
184	The Impact of the Lexile Framework on Standardized Literacy Proficiency Scores Gaines, Julia L 24 April 2016 (has links) Upon entering middle school, students within the study district in southeastern Tennessee had low literacy proficiency scores on the Tennessee Comprehensive Assessment Program (TCAP) for 3 consecutive years. Middle school administrators implemented a program called Lexile Framework (LF) into the literacy curriculum in 2011 to improve TCAP scores. However, the change in literacy scores had not been examined following the implementation of LF. The purpose of this quasi-experimental research study was to examine the differences in literacy scores on TCAP of students across the years of pre- and post-LF implementation into the curriculum (2009-2011 and 2012-2014). The theoretical framework for this research study was Vygotsky’s social development theory used within the LF to create student-centered learning in order for students to construct new knowledge by making connections with their literacy experiences. With a convenience sample of 225 students, a repeated-measure analysis of variance determined if there was a significant change in the archived matched literacy TCAP scores before and after the implementation of LF. The multivariate tests indicated a significant (Wilk’s Λ = .21, F (3, 222) = 276.85, p < .01) and linear effect (F (1, 224) = 709.75, p < .01) with partial eta squared (η2 = .76) of LF on literacy TCAP scores of students across the years of pre- and post-LF implementation. Positive social change implications include providing school administrators with research findings to inform district-wide decisions regarding the use of LF in the curricula in their middle schools. Increasing students’ literacy TCAP scores may ultimately improve graduation rates for students. Lexile Framework Literacy Standardized Literacy Proficiency Scores Validation of Reading Interventions Educational Methods Elementary Education and Teaching Higher Education Administration Higher Education and Teaching Scholarship of Teaching and Learning Secondary Education and Teaching Special Education Administration Special Education and Teaching Urban Education
185	Students with Physical Disabilities - Reflections on their Experiences with Work Preparation Programs, Services and Accommodations in a Higher Education Institution Castillo, Claudia 26 May 2016 (has links) For a variety of reasons, college students with disabilities encounter stressors beyond those of students who do not have disabilities. One of the more salient examples is that students with disabilities are required to disclose that they have a disability and to communicate with faculty and staff in order to receive academic accommodations, as afforded to them under sub-part E of Section 504 of the Education and Rehabilitation Act of 1974. Therefore, postsecondary institutions are required to make appropriate accommodations available to students with disabilities, but they are not required to proactively seek them out. The purpose of this study was to learn about the needs that students with physical disabilities have concerning their successful transition into professional careers. This was accomplished by analyzing how five current senior students with disabilities reflected on their experiences, particularly in terms of using work preparation programs and/or accommodations necessary for them to participate in employment recruitment activities provided by the university’s career services office. The intent of those services was to transition disabled students from the university environment into the workforce. The findings showed that the students perceived they did not receive a lot of information regarding the services available, and they also expressed that the university should have done more in transitioning them into their professional life. The basic premise is that higher education professionals, key support staff, and administrators who provide work preparation programs, career, transition and accommodation services to disabled students are in a position to help remove informational barriers, facilitate the use of services and accommodations, and to actively encourage students with disabilities to enter the workforce upon graduation. The results of this study may inspire university personnel to find creative ways to get students involved and motivated to seek services available to them, to be best self-advocates to students needing their services, and to understand the transition challenges that exist between academic life and entry into the workforce. By being more aware and sensitive about the needs of students with disabilities, the professionals who work with them might be better positioned to help them experience a successful and more supported transition into a competitive employment and independent life after college. Career development disability physical disabilities institutions of higher learning stigma students with disabilities work preparation workforce transition disabilities and workforce Accessibility Counseling Counselor Education Disability and Equity in Education Education Policy Higher Education Higher Education Administration Higher Education and Teaching Inequality and Stratification Other Social and Behavioral Sciences Social Policy Special Education Administration
186	BBT Acoustic Alternative Top Bracing CADD Data Set-NoRev-2022Jun28 Hemphill, Bill 22 July 2022 (has links) This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are (a) a one-piece base for the standard kit's (Martin-style) bracing, (b) 277 Ladder-style bracing, and (c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars. The CADD data set for each of the three (3) top bracing designs includes (a) a nominal 24" x 18" x 3mm (0.118") Baltic birch plywood laser layout of (1) the one-piece base with slots, (2) pre-radiused and pre-scalloped vertical braces with tabs to ensure proper orientation and alignment, and (3) various gages and jigs and (b) a nominal 15" x 20" marking template. The 'provided as is" CADD data is formatted for use on a Universal Laser Systems (ULS) laser cutter digital (CNC) device. Each CADD drawing is also provided in two (2) formats: Autodesk AutoCAD 2007 .DWG and .DXF R12. Users should modify and adapt the CADD data as required to fit their equipment. This CADD data set is released and distributed under a Creative Commons license; users are also encouraged to make changes o the data and share (with attribution) their designs with the worldwide acoustic guitar building community. BBT acoustic guitar brace bracing top CADD CAD DWG DXF R12 lutier ETSU OM orchestra model STEM STEM Guitar building project kit storefront 3mm 0.118" Baltic birch plywood sheet 24 18 3mm 0.118 laser cut engrave etch marking template layout Martin Martin-style X-brace X-bracing X-braced X tone arm tonal variant alternative alt ladder 277 fan classicial European tab slot bump out radiused 300 inch 25 foot 762 meter radius base vertical scallop glue wood go-bar go bar deck jig fixture gage gauge headstock head plate neck contour fret stack stackable align alignment position orientation vertical perpendicular T1 upper bout lower kerfing sand chisel shape weight lighten light tone tap carbon-dioxide CO2 10.6 µm Universal Laser Systems ULS workboard waxed baker sheet Acoustics, Dynamics, and Controls Adult and Continuing Education Algebraic Geometry Appalachian Studies Art Education Educational Technology Elementary Education and Teaching Engineering Education Geometry and Topology Harmonic Analysis and Representation Higher Education and Teaching Industrial and Product Design Manufacturing Music Music Education Other Engineering Science and Materials Polymer and Organic Materials Science and Mathematics Education Secondary Education and Teaching Structural Materials Vocational Education
187	BBT Acoustic Alternative Top Bracing CADD Data Set-NoRev-2022Jun28 Hemphill, Bill 22 July 2022 (has links) This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are (a) a one-piece base for the standard kit's (Martin-style) bracing, (b) 277 Ladder-style bracing, and (c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars. The CADD data set for each of the three (3) top bracing designs includes (a) a nominal 24" x 18" x 3mm (0.118") Baltic birch plywood laser layout of (1) the one-piece base with slots, (2) pre-radiused and pre-scalloped vertical braces with tabs to ensure proper orientation and alignment, and (3) various gages and jigs and (b) a nominal 15" x 20" marking template. The 'provided as is" CADD data is formatted for use on a Universal Laser Systems (ULS) laser cutter digital (CNC) device. Each CADD drawing is also provided in two (2) formats: Autodesk AutoCAD 2007 .DWG and .DXF R12. Users should modify and adapt the CADD data as required to fit their equipment. This CADD data set is released and distributed under a Creative Commons license; users are also encouraged to make changes o the data and share (with attribution) their designs with the worldwide acoustic guitar building community. BBT acoustic guitar brace bracing top CADD CAD DWG DXF R12 lutier ETSU OM orchestra model STEM STEM Guitar building project kit storefront 3mm 0.118" Baltic birch plywood sheet 24 18 3mm 0.118 laser cut engrave etch marking template layout Martin Martin-style X-brace X-bracing X-braced X tone arm tonal variant alternative alt ladder 277 fan classicial European tab slot bump out radiused 300 inch 25 foot 762 meter radius base vertical scallop glue wood go-bar go bar deck jig fixture gage gauge headstock head plate neck contour fret stack stackable align alignment position orientation vertical perpendicular T1 upper bout lower kerfing sand chisel shape weight lighten light tone tap carbon-dioxide CO2 10.6 µm Universal Laser Systems ULS workboard waxed baker sheet Acoustics, Dynamics, and Controls Adult and Continuing Education Algebra Algebraic Geometry Appalachian Studies Applied Mathematics Art Education Biology Computer-Aided Engineering and Design Educational Technology Elementary Education and Teaching Engineering Education Engineering Science and Materials Forest Sciences Geometry and Topology Harmonic Analysis and Representation Industrial and Product Design Manufacturing Music Music Education Other Engineering Other Engineering Science and Materials Physics Polymer and Organic Materials Polymer Chemistry Science and Mathematics Education Secondary Education and Teaching Structural Materials Vocational Education

Page generated in 0.1616 seconds