No description available.

During recent years, significant advances have been made in the field of molecular therapy in urologic oncology, mainly for advanced renal cell carcinoma. In this hitherto largely treatment-refractory disease, several agents have been developed targeting the von Hippel-Lindau metabolic pathway which is involved in carcinogenesis and progression of the majority of renal cell carcinomas. Although cure may not be expected, new drugs, such as the multikinase inhibitors sorafenib and sunitinib and the mammalian target of rapamycine inhibitor temsirolimus, frequently stabilize the disease course and may improve survival. Fewer data are available supporting molecular therapies in prostate, bladder, and testicular cancers. Preliminary data suggest a potential role of high-dose calcitriol and thalidomide in hormone-refractory prostate cancer, whereas targeted therapies in bladder and testicular cancers are still more or less limited to single-case experiences. The great theoretical potential and the multitude of possible targets and drug combinations, however, support further research into this exciting field of medical treatment of urologic malignancies. / Dieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.

This work aims at improving the understanding of the fundamental physics behind molecular doping of organic semiconductors, being a requirement for efficient devices like organic light-emitting diodes (OLED) and organic photovoltaic cells (OPV). The underlying physics is studied by electrical conductivity and thermoelectrical Seebeck measurements and the influences of doping concentration and temperature are investigated. Thin doped layers are prepared in vacuum by thermal co-evaporation of host and dopant molecules and measured in-situ. The fullerene C60, known for its high electron mobility, is chosen as host for five different n-dopants. Two strongly ionizing air-sensitive molecules (Cr2(hpp)4 and W2(hpp)4) and three air-stable precursor compounds (AOB, DMBI-POH and o-MeO-DMBI-I) which form the active dopants upon deposition are studied to compare their doping mechanism. High conductivities are achieved, with a maximum of 10.9 S/cm. Investigating the sample degradation by air-exposure, a method for regeneration is proposed, which allows for device processing steps under ambient conditions, greatly enhancing device fabrication possibilities. Various material combinations for p-doping are compared to study the influence of the molecular energy levels of host (MeO-TPD and BF-DPB) and dopant (F6-TCNNQ and C60F36). Corrections for the only estimated literature values for the dopant levels are proposed. Furthermore, the model system of similar-sized host pentacene and dopant F4-TCNQ is studied and compared to theoretical predictions. Finally, a model is developed that allows for estimating charge carrier mobility, density of free charge carriers, doping efficiency, as well as the transport level position from combining conductivity and Seebeck data. / Diese Arbeit untersucht organische Halbleiter und den Einfluss von molekularer Dotierung auf deren elektrische Eigenschaften, mit dem Ziel effizientere Bauelemente wie organische Leuchtdioden oder Solarzellen zu ermöglichen. Mittels Leitfähigkeitsuntersuchungen sowie thermoelektrischen Seebeck-Messungen werden die Einflüsse der Dotierkonzentration sowie der Temperatur auf die elektrischen Eigenschaften dünner dotierter Schichten analysiert. Das Abscheiden der Schichten durch Koverdampfen im Vakuum ermöglicht eine in-situ Analyse. Das Fulleren C60, bekannt für besonders hohe Elektronenbeweglichkeit, wird als Wirt für fünf verschieden n-Dotanden, zwei extrem stark ionisierende luftreaktive (Cr2(hpp)4 und W2(hpp)4) sowie drei luftstabile (AOB, DMBI-POH und o-MeO-DMBI-I), verwendet. Dies ermöglicht Schlüsse auf die unterschiedlichen zugrunde liegenden Dotiermechanismen und das Erreichen von Leitfähigkeiten von bis zu 10.9 S/cm. Für einen der luftreaktiven Dotanden wird die Probendegradation an Luft untersucht und eine Regenerationsmethode aufgezeigt, die Prozessierungsschritte in Luft erlaubt und somit entscheidend für zukünftige Bauelementfertigung sein könnte. Verschiedene p-dotierte Materialkombinationen werden untersucht, um den Einfluss der molekularen Energieniveaus von Wirt (MeO-TPD und BF-DPB) und Dotand (F6-TCNNQ und C60F36) auf die Dotierung zu studieren. Dies ermöglicht Schlussfolgerungen auf die in der Literatur bisher nur abgeschätzten Energieniveaus dieser Dotanden. Ferner werden die Eigenschaften des bereits theoretisch modellierten Paares Pentacen und F4-TCNQ mit den Vorhersagen verglichen und die Abweichungen diskutiert. Abschießend wird ein Modell entwickelt, das die Abschätzung von Dotiereffizienz, Ladungsträgerkonzentration, Ladungsträgerbeweglichkeit sowie der Position des Transportniveaus aus Leitfähigkeits- und Seebeck-Messungen erlaubt.

Krebserkrankungen stellen in Deutschland die zweithäufigste Todesursache dar und die Anzahl der Neuerkrankungen nimmt stetig zu. Frühzeitige Diagnosen und Therapiemöglichkeiten sind daher dringend erforderlich. Cyklinabhängige Proteinkinasen (Cdk) spielen eine entscheidende Rolle bei der Regulation des Zellzyklus. Viele Tumore zeigen eine deregulierte Cdk4‑Aktivität und/oder ‑Expression. Insgesamt zeigen ca. 80% aller Tumore eine Fehlregulation der für den Zellzyklus zentralen Cdk4/CykD1/INK4/pRb/E2F Signalkaskade. Somit besitzen Cdks ein enormes therapeutisches Potential im Kampf gegen Krebs. Die spezifische Inhibierung der Cdks verhindert die Zellproliferation und damit das Tumorwachstum. In den letzten Jahren wurden verschiedenste Strukturklassen vorgestellt, die als Cdk4-Inhibitor wirken. Im Rahmen der Promotion sollen die Möglichkeiten einer funktionellen Tumordiagnose mittels cyklinabhängiger Kinasen untersucht werden. Die Entwicklung von radioaktiv markierten Inhibitoren der Cdk4/6 als Radiotracer und ihre radiopharmakologische Charakterisierung stellt dabei einen neuen Ansatz dar. Um die Rolle der Cdk4/6 im Zellzyklus von gesunden und deregulierten (z.B. Tumor-) Zellen aufzuklären, sollten mit Iod-124 und Fluor-18 markierte Inhibitoren eingesetzt werden, die hochselektiv diese Cdks blockieren. Zunächst wurden verschiedene Inhibitoren der Cdk4/6 und deren Vorstufen für die Radiomarkierung dargestellt. Die bereits aus den Vorarbeiten von VanderWel et al., 2005 und Toogood et al., 2001 bekannten Syntheserouten mussten dazu optimiert werden und für neue Verbindungen, wie die fluorethylierten Substanzen, wurden neue Reaktionswege gefunden. Die dargestellten Referenzverbindungen CKIA-E wurden anschließend mittels Durchflusszytometrie an den Zelllinien HT-29 und FaDu auf ihre inhibitorischen Wirkung untersucht. Die Untersuchungen der Verbindungen CKIA/B/E zeigte, dass ein Zellzyklusarrest unter Einwirkung der Inhibitoren erreichbar ist. Die weiteren Untersuchungen zur Radiomarkierbarkeit sowie die radiopharmakologische Evaluation sollten daher an den Verbindungen CKIA, CKIB und CKIE stattfinden. Die Darstellung der Verbindungen [124I]CKIA und [124I]CKIB erfolgte in zwei Schritten über die elektrophile Substitution durch regioselektive Destannylierung mit anschließender Entschützung der Seitenkette. Die Darstellung der fluorethylierten Verbindung erfolgte ebenfalls über eine Zweischrittsynthese beginnend mit der Synthese der prosthetischen Gruppe [18F]BFE aus der Tosylmarkierungsvorstufe. Die zur Markierung des sekundären Amins zur Auswahl stehenden prosthetischen Gruppen [18F]Fluorethyltosylat ([18F]FETos) und [18F]Bromfluorethan ([18F]BFE) wurden auf ihre Eignung untersucht, ebenso wie die Auswahl einer geeigneten Markierungsvorstufe für die Darstellung der prosthetischen Gruppe. Die optimierten Syntheserouten ermöglichten die Isolierung von ausreichenden Mengen an Produktaktivität für die radiopharmakologischen Untersuchungen. Es fanden, neben der Bestimmung der spezifischen Aktivität und der Lipophilie der Verbindungen, Zellaufnahmeuntersuchungen und Bestimmungen zur Stabilität der Verbindungen in vitro, ex vivo und in vivo statt. Die radioiodierten Verbindungen konnten des Weiteren zur Untersuchungen der Bioverteilung in normalen männlichen Wistar-Ratten eingesetzt werden. Für alle drei Verbindungen konnte eine sehr hohe in vitro-Stabilität festgestellt werden. Die Zellaufnahmeuntersuchungen zeigten vor allem für die Verbindungen [124I]CKIA und [124I]CKIB eine beträchtliche Zellaufnahme von über 1000% ID/mg Protein nach 2 h. Die Zellaufnahme der Verbindung CKIE ist geringer, sollte allerdings für eine in vivo-Anwendung ausreichend sein. Die Untersuchung der in vivo‑Stabilität der Verbindungen [124I]CKIA, [124I]CKIB und [18F]CKIE im Blut von Wistar Ratten ergab allerdings, dass alle Verbindungen schnell metabolisiert werden. Die Untersuchung der Bioverteilung der radioiodierten Verbindungen belegen eine in vivo Radiodeiodierung sowie eine hohe hepatobliliäre Auscheidungsrate. Im Hinblick auf eine Anwendung als Radiotracer konnten im Rahmen dieser Arbeit neue Erkenntnisse gewonnen werden. Die dargestellten Inhibitoren sind in der Lage am Zellmodell den Zellzyklusarrest in der G1-Phase zu induzieren. Eine Radiomarkierung der ausgewählten Strukturen liefert das Produkt mit reproduzierbarer Ausbeute in hoher radiochemischer Reinheit und ausreichender spezifischer Aktivität, allerdings ist eine Herstellung der fluorethylierten Verbindung unter GMP-Bedingungen nur schwer realisierbar. Die radiomarkierten Verbindungen zeigen eine hohe in vitro-Stabilität und werden energieabhängig in die Zelle aufgenommen. Anhand der Stabilitätsuntersuchungen in vivo wurde gezeigt, dass alle drei Verbindungen in vivo instabil sind und sehr schnell hepatobiliär eliminiert.

Over the last decade a huge amount of experimental data on biological systems has been generated by modern high-throughput methods. Aided by bioinformatics, the '-omics' (genomics, transcriptomics, proteomics, metabolomics and interactomics) have listed, quantif ed and analyzed molecular components and interactions on all levels of cellular regulation. However, a comprehensive framework, that does not only list, but links all those components, is still largely missing. The biology-based but highly interdisciplinary field of systems biology aims at such a holistic understanding of complex biological systems covering the length scales from molecules to whole organisms. Spanning the length scales, it has to integrate the data from very different fields and to bring together scientists from those fields. For linking experiments and theory, hypothesis-driven research is an indispensable concept, formulating a cycle of experiment, modeling, model predictions for new experiments and, fi nally, their experimental validation as the start of the new iteration. On the hierarchy of length scales certain unique entities can be identi fied. At the nanometer scale such functional entities are molecules and at the micrometer level these are the cells. Cells can be studied in vitro as independent individuals isolated from an organism, but their interplay and communication in vivo is crucial for tissue function. Control over such regulation mechanisms is therefore a main goal of medical research. The requirements for understanding cellular interplay also illustrate the interdisciplinarity of systems biology, because chemical, physical and biological knowledge is needed simultaneously. Following the notion of cells as the basic units of life, the focus of this thesis are mathematical multi-scale models of multi-cellular systems employing the concept of individual (or agent) based modeling (IBM). This concept accounts for the entity cell and their individuality in function and space. Motivated by experimental observations, cells are represented as elastic and adhesive spheres. Their interaction is given by a model for elastic homogeneous spheres, which has been established for analysis of the elastic response of cells, plus an adhesion term. Cell movement is modeled by an equation of motion for each cell which is based on the balance of interaction, friction and active forces on the respective cell. As a fi rst step the model was carefully examined with regard to the model assumptions, namely, spherical shape, homogeneous isotropic elastic body and apriori undirected movement. The model examination included simulations of cell sorting and compression of multicellular spheroids. Cell sorting could not be achieved with only short range adhesion. However, it sorting completed with long range interactions for small cell numbers, but failed for larger aggregates. Compression dynamics of multi-cellular spheroids was apparently reproduced qualitatively by the model. But in a more detailed survey neither the time scales nor the rounding after compression could be reproduced. Based on these results, the applications consistent with the assumed simpli cations are discussed. One already established application is colony growth in two-dimensional cell cultures. In order to model cell growth and division, a two-phase model of the cell cycle was established. In a growth phase the cell doubles its volume by stochastic increments, and in a mitotic phase it divides into two daughter cells of equal volume. Additionally, control of the cell cycle by contact inhibition is included in the model. After examination of its applicability, the presented model is used for simulations of in vitro growth of mesenchymal stem cells (MSC) and subsequent cartilage formation in multi-cellular spheroids. A main factor for both processes is the oxygen concentration. Experimental results have shown, that i) MSC grow much better in vitro at low than at high oxygen concentrations and ii) the MSC progeny harvested from low oxygen culture produce higher amounts of the cartilage components aggrecan and collagen II in multicellular spheroids than the ones from high oxygen culture. In order to model these processes, IBM was extended by a stochastic model for cellular differentiation. In this model cellular differentiation is captured phenomenologically by two additional individual properties, the degree of differentiation and the lineage or cell type, which are subject to fl uctuations, that are state and environment dependent. After fitting the model parameters to the experimental results on MSC growth in monoclonal expansion cultures at low and high oxygen concentrations, the resulting simulated cell populations were used for initialization of the simulations of cartilage formation in multi-cellular spheroids. The model nicely reproduced the experimental results on growth dynamics and the observed number of functional cells in the spheroids and suggests the following explanation for the difference between the two expansion cultures: due to the stronger pre-differentiation found after expansion in high oxygen, the plasticity of these cells is smaller and less cell adopt the chondrogenic phenotype and start to produce cartilage. Moreover, the model predicts an optimal oxygen concentration for cartilage formation independent of expansion culture and a de-differentiating effect of low oxygen culture within 24h. Because all simulations comply with the concept of hypothesis-driven research and follow closely the experimental protocols, they can easily be tested and are currently used for optimization of a bioreactor for cartilage production. Cell populations are composed of individual cells and regulation of population properties is performed by individual cell, but knowledge about individual cell fates is largely missing due to the problem of single cell tracking. The IBM modeling approach used for modeling MSC growth and differentiation generically includes information of each individual cell and is therefore perfectly suited for tackling this question. Based on the validated parameter set, the model was used to generate predictions on plasticity of single cells and related population dynamics. Single cell plasticity was quantifi ed by calculating transition times into stem cell and differentiated cell states at high and low oxygen concentrations. At low oxygen the results predict a frequent exchange between all subpopulations, while at high oxygen a quasi-deterministic differentiation is found. After quantifying the plasticity of single cells at low and high oxygen concentration, the plasticity of a cell population is addressed in a simulation closely following a regeneration experiment of populations of hematopoietic progenitor cells. In the simulation the regeneration of the distribution of differentiation states in the population is monitored after selection of subpopulations of stem cells and differentiated cells. Simulated regeneration occurs on the time scales estimated from the single cell transition times except the unexpectedly fast regeneration from differentiated cells in the high oxygen environment, which favors differentiation. The latter case emphasizes the importance of single outlier cells in such system, which in this case repopulate less differentiated states with their progeny. In general, cell proliferation and regeneration behavior are in uenced by biomechanical and geometrical properties of the environment e.g. matrix stiffness or cell density. Because in the model cells are represented as physical objects, a variation of friction is linked to cell motility. The cultures of less motile cells become denser at the same size and the effects of contact inhibition of growth more pronounced. This variation of friction coe fficients allows the comparison of cultures with varying degrees of contact inhibition regarding their differentiation structure and the results suggest, that stalled proliferation is su fficient to explain the well-known differentiation effects in confl uent colonies. In addition, the composition of the simulated stem cell pool was analyzed regarding differentiation. In contrast to the established pedigree models, where stem cell can only be produced by asymmetric division, this model predicts that most of the cells in stem cell states descend from progenitor cells of intermediate differentiation states. A more detailed analysis of single cell derived clones revealed properties that could not be described by the model so far. First, a differentiation gradient was observed in larger colonies, that was the opposite of the one predicted by the model. Second, the proliferative activity turned out to depend not only on oxygen, but also to be a property of individual clones persisting over many generations. Because the relation slow growth/pre-differentiation also holds for single cell derived clones, the general model of differentiation is extended by another heritable individual property. Motivated by the decline of proliferation and differentiation in culture and the high metabolic and epigenetic activity during cell division, each division event is assumed to de-stabilize stem cell states. Consequently, in the model the cells age in terms of cell divisions determines the fl uctuations in stem cell states and the environment the mean fl uctuation strength. Including this novel concept, that links aging to growth and differentiation dynamics, into the model reproduces the experimental results regarding differentiation gradient and persistent clonal heterogeneity. The spatial differentiation pattern can largely be explained by the spatio-temporal growth pattern of the mono-clonal cell assembly: cells close to the border of the cell assembly have undergone more cell divisions than those in the interior and therefore their stem cell states are less stable. Heterogeneity of single-cell derived clones depends on the age of the first cell in the clone. When the stem cell fluctuations equal the mean fl uctuations strength, the proliferative activity passes a maximum at a certain age due to the destabilization of stem cell states. Thereafter the proliferative activity decreases, because more time is spent in non-proliferative differentiated states. Considering the number of divisions the cells have already undergone in vivo and after the initial expansion in vitro, it can be assumed that all cells have already passed this maximum. Interestingly, the model also predicts an optimal age for directed differentiation, when cells stably differentiate, but have not lost the required plasticity. According to the model, this clonal heterogeneity may be caused purely in vitro, but hypothetical simulation of in vivo aging yielded results consistent with experiments on MSC from rats of varying age. Finally, the detailed molecular regulation mechanisms in a multi-scale tissue model of liver zonation was studied, in which the key molecular components were explicitly modeled. Hence, this model resolved the intracellular regulation in higher resolution than the above considered differentiation models which had summarized the intracellular control and differentiation mechanisms by a few phenomenological, dynamical variables. The metabolic zonation of the liver is essential for many of the complex liver functions. One of the vitally important enzymes, glutamine synthetase, (GS) is only synthesized in a strictly defi ned pattern. Experimental evidence has shown that a particular pathway, the canonical wnt pathway, controls expression of the gene for GS. A model for transport, receptor dynamics and intracellular regulation mechanism has been set up for modeling the spatio-temporal formation of this pattern. It includes membrane-bound transport of the morphogen and an enzyme kinetics approach to fibeta-catenin-regulation in the interior of the cell. As an IBM this model reproduces the results of co-culture experiments in which two-dimensional arrangements of liver cells and an epithelial liver cell line give rise to different patterns of GS synthesis. The two main predictions of the model are: First, GS-synthesis requires a certain local cell number of wnt releasing cells. And second, a simple inversion of geometry explains the difference between the specifi c GS pattern found in the liver and in the co-culture experiments. Summarizing the results presented in this thesis, it can be concluded that properties such as the occurrence of memory effects and single cells pursuing fates far off the population average could be essential for biological function. Considering the role of single cells in many tissues, the use of individual based methods, that are able to take such effects into account, can be expected to be a very valuable tool for the problems of systems biology.

Background Molecular data of histologically classified oligodendrogliomas are available offering the possibility to stratify these human brain tumors into clinically relevant molecular subtypes. Methods Gene copy number, mutation, and expression data of 193 histologically classified oligodendrogliomas from The Cancer Genome Atlas (TCGA) were analyzed by well-established computational approaches (unsupervised clustering, statistical testing, network inference). Results We applied hierarchical clustering to tumor gene copy number profiles and revealed three molecular subgroups within histologically classified oligodendrogliomas. We further screened these subgroups for molecular glioma markers (1p/19q co-deletion, IDH mutation, gain of chromosome 7 and loss of chromosome 10) and found that our subgroups largely resemble known molecular glioma subtypes. We excluded glioblastoma-like tumors (7a10d subgroup) and derived a gene expression signature distinguishing histologically classified oligodendrogliomas with concurrent 1p/19q co-deletion and IDH mutation (1p/19q subgroup) from those with predominant IDH mutation alone (IDHme subgroup). Interestingly, many signature genes were part of signaling pathways involved in the regulation of cell proliferation, differentiation, migration, and cell-cell contacts. We further learned a gene regulatory network associated with the gene expression signature revealing novel putative major regulators with functions in cytoskeleton remodeling (e.g. APBB1IP, VAV1, ARPC1B), apoptosis (CCNL2, CREB3L1), and neural development (e.g. MYTIL, SCRT1, MEF2C) potentially contributing to the manifestation of differences between both subgroups. Moreover, we revealed characteristic expression differences of several HOX and SOX transcription factors suggesting the activity of different glioma stemness programs in both subgroups. Conclusions We show that gene copy number profiles alone are sufficient to derive molecular subgroups of histologically classified oligodendrogliomas that are well-embedded into general glioma classification schemes. Moreover, our revealed novel putative major regulators and characteristic stemness signatures indicate that different developmental programs might be active in these subgroups, providing a basis for future studies.

Background To investigate vascular-related pathophysiological characteristics of two human lung cancers with modifiable vascularisation using MRI and CT. Methods Tumour xenografts with modifiable vascularisation were established in 71 rats (approval by the Animal Care Committee was obtained) by subcutaneous transplantation of two human non-small-cell lung cancer (NSCLC) cells (A549, H1299) either alone or co-transplanted with vascular growth promoters. The vascularity of the tumours was assessed noninvasively by MRI diffusion-weighted-imaging (DWI), T2-weighted, and time-of-flight (TOF) sequences) as well as contrast-enhanced CT (CE-CT), using clinical scanners. As a reference standard, histological examinations (CD-31, fluorescent beads) were done after explantation. Results Microvessel density (MVD) was higher in co-transplanted tumours (171 ± 19 number/mm2) than in non-co-transplanted tumours (111 ± 11 number/mm2; p = 0.002). Co-transplanted tumours showed higher growth rates and larger tumour vessels at TOF-MRI as well as larger necrotic areas at CE-CT. In co-transplanted tumours, DWI revealed higher cellularity (lower minimal ADCdiff 166 ± 15 versus 346 ± 27 mm2/s × 10−6; p < 0.001), highly necrotic areas (higher maximal ADCdiff 1695 ± 65 versus 1320 ± 59 mm2/s × 10−6; p < 0.001), and better-perfused tumour stroma (higher ADCperf 723 ± 36 versus 636 ± 51 mm2/s × 10−6; p = 0.005). Significant correlations were found using qualitative and quantitative parameters: maximal ADCperf and MVD (r = 0.326); maximal ADCdiff and relative necrotic volume on CE-CT (r = 0.551); minimal ADCdiff and MVD (r = −0.395). Conclusions Pathophysiological differences related to vascular supply in two human lung cancer cell lines with modifiable vascularity are quantifiable with clinical imaging techniques. Imaging parameters of vascularisation correlated with the results of histology. DWI was able to characterise both the extent of necrosis and the level of perfusion.

A material to function as a molecular electronic device should have a strong coupling with electrodes through appropriate and well-defined anchoring groups and have to support an effective traveling of charges via a conjugated molecular backbone. Oligo(3-hexylthiophene)s are π-conjugated molecules having large applicability in several areas of organic electronics owing interesting semiconducting properties and they also hold great promises in the field of single-molecule electronics. Polymerization methods, in principle, allow construction of long conjugated systems in a single synthetic step, however, most of them lack precision. This work uses externally initiated chain-growth Kumada Catalyst - Transfer Polycondensation (KCTP) for the synthesis of semiconductive oligo(3-hexylthiophene) wires with controllable molecular weights, low polydispersities, high regioregularities as well as with well-defined starting and end groups. In such a way, the synthetic efforts were compromised to obtain relatively easy a series of very complex molecular wires with a reasonable structural precision. To modulate the electronic function of oligomer backbones, specific charge-transfer moieties (DMA-TCBD and Fc-TCBD) were inserted as side chains or end groups. In-situ termination of KCTP with ZnCl-functionalized electron rich alkynes followed by Diederich-type click reaction resulted in the synthesis of asymmetrical oligo(3-hexylthiophene)s having thiolate-functionalized starting groups and donor-functionalized end-groups with a high degree of end-group functionalizations. Side chains of double-thiolate functionalized oligo(3-hexylthiophene)s, on the other hand, were further modified with the insertion of charge-transfer groups by post-polymerization functionalization. While the facile synthesis and modification of oligo(3-hexylthiophene)s enable the control over the molecular backbone, the specific starting and end anchoring groups allow the control over the electrode oligomer interface. To assure the formation of alligator clips between oligomer backbone and Au electrode, the optimizations including proper end-group conversion into mild counterparts followed by in-situ deprotection into thiolates and the binding abilities on gold were investigated. Finally, the conductance of bis-end functionalized oligo(3-hexylthiophene)s was preliminarily studied through oligomer backbone by Mechanically Controllable Break Junctions (MCBJs) setup and through oligomer-attached DNA origami-templated gold nanowires by individual electrical contacts. The developed KCTP-based synthetic route, at the end, presents new opportunities for the facile synthesis, the ease of modification and the feasibility of asymmetrical and side chain functionalized oligo(3-hexylthiophene) wires for needs of molecular electronics.

Electronic circuits comprising organic semiconductor thin-films are part of promising technologies for a renewable power generation and an energy-efficient information technology. Whereas TV and mobile phone applications of organic light emitting diodes (OLEDs) got ready for the market awhile ago, organic photovoltaics still lack in power conversion efficiencies, especially in relation to their current fabrication costs. A major reason for the low efficiencies are losses due to the large number of charge carrier traps in organic semiconductors as compared to silicon. It is the aim of this thesis to identify and quantify charge carrier traps in vacuum-deposited organic semiconductor thin-films and comprehend the reasons for the trap formation. For that, the techniques impedance spectroscopy (IS), thermally stimulated currents (TSC), and photoelectron spectroscopy are utilized. In order to assess the absolute energy of charge carrier traps, the charge carrier transport levels are computed for various hole transport materials such as MeO-TPD, pentacene, and ZnPc. Unlike inorganics, organic semiconductors possess in first-order approximation Gaussian distributed densities of states and temperaturedependent transport levels. The latter shift by up to 300 meV towards the energy gap-mid when changing from room temperature to 10 K as it is done for TSC examinations. The frequency-dependent capacitance response of charge carrier traps in organic Schottky diodes of pentacene and ZnPc are studied via impedance spectroscopy. In undoped systems, deep traps with depths of approx. 0.6 eV and densities in the order of 1016...1017 cm−3 are prevailing. For pentacene, the deep trap density is reduced when the material undergoes an additional purification step. Utilizing p-doping, the Fermi level is tuned in a way that deep traps are saturated. Vice versa, the freeze-out of p-doped ZnPc provides further insight into the influence of trap-filling, impurity saturation and reserve on the Fermi level position in organic semiconductors. Furthermore, charge carrier traps are investigated via thermally stimulated currents. It is shown that the trap depths are obtained correctly only if the dispersive transport of the released charge carriers until their extraction is considered. For the first time, the polarity of charge carrier traps in MeO-TPD, ZnPc, and m-MTDATA is identified from TSC’s differences in release time when spacer layers are introduced in the TSC samples. Simultaneously, tiny hole mobilities in the order of 10−13 cm2 Vs−1 are detected for low-temperature thin-films of the hole transporter material Spiro-TTB. It is shown for Spiro-TTB co-evaporated with the acceptor molecule F6-TCNNQ and a p-doped ZnPc:C60 absorber blend that the doping process creates shallow trap levels. Finally, various organic hole transport materials are examined upon their stability in water and oxygen atmosphere during sample fabrication and storage of the organic electronics. In case of pentacene, ZnPc, MeO-TPD, and m-MTDATA, hole traps are already present in unexposed thin-films, which increase in trap density upon oxygen exposure. A global trap level caused by oxygen impurities is found at energies of 4.7...4.8 eV that is detrimental to hole transport in organic semiconductors. / Elektronische Bauelemente aus Dünnschichten organischer Halbleiter sind Teil möglicher Schlüsseltechnologien zur regenerativen Energiegewinnung und energieeffizienten Informationstechnik. Während Fernseh- und Mobilfunkanwendungen organischer Leuchtdioden (OLEDs) bereits vor einiger Zeit Marktreife erlangt haben, ist die organische Photovoltaik (OPV) noch durch zu hohe Fertigungskosten in Relation zu unzureichenden Effizienzen unrentabel. Ein wesentlicher Grund für die niedrigen Wirkungsgrade sind Verluste durch die im Vergleich zu Silizium hohe Zahl an Ladungsträgerfallen in organischen Halbleitern. Ziel dieser Arbeit ist es, mittels Impedanz-Spektroskopie (IS), thermisch stimulierten Strömen (TSC) und Photoelektronenspektroskopie methodenübergreifend Ladungsträgerfallen in vakuumverdampften organischen Dünnschichten zu identifizieren, zu quantifizieren und ihre Ursachen zu ergründen. Um die Energie von Ladungsträgerfallen absolut beziffern zu können, wird zunächst für verschiedene Lochtransportmaterialien wie z.B. MeO-TPD, Pentazen und ZnPc die Transportenergie aus den in erster Ordnung gaußförmigen Zustandsdichten berechnet. Im Gegensatz zu anorganischen Halbleitern ist die Transportenergie in organischen Halbleitern temperaturabhängig. Sie verschiebt sich beim Übergang von Raumtemperatur zu 10 K, wie für TSC Untersuchungen bedeutsam, um bis zu 300 meV in Richtung der Bandlückenmitte. Mittels Impedanz-Spektroskopie wird die frequenzabhängige Kapazitätsantwort von Ladungsträgerfallen in organischen Schottky-Dioden aus Pentazen und ZnPc untersucht. In undotierten Systemen dominieren Defekte mit Tiefen um 0.6 eV, deren Dichte in der Größenordnung von 1016...1017 cm−3 liegt, sich aber im Fall von Pentazen durch einen zusätzlichen Materialaufreinigungsschritt halbieren lässt. Über p-Dotierung wird das Fermi-Level so eingestellt, dass tiefe Fallen abgesättigt werden können. Umgekehrt liefert das Ausfrieren von p-dotiertem ZnPc weitere Belege für den Einfluss von Fallenzuständen, Störstellen-Erschöpfung und Reserve auf das Fermi-Level in dotierten organischen Halbleitern. Im Weiteren werden Ladungsträgerfallen über thermisch stimulierte Ströme untersucht. Es wird gezeigt, dass die Fallentiefen nur dann konsistent bestimmt werden, wenn der dispersive Transport von freigesetzten Ladungsträgern zur Extraktionsstelle berücksichtigt wird. Durch Einführung von ’Abstandshalterschichten’ werden erstmalig über TSC die Polaritäten von Ladungsträgerfallen in MeO-TPD, ZnPc und m-MTDATA per Laufzeitunterschied bestimmt. Gleichzeitig werden geringste Löcherbeweglichkeiten in der Größenordnung von 10−13 cm2 Vs−1 für stark gekühlte Dünnschichten des Lochtransporters Spiro-TTB gemessen. Wie für Spiro-TTB koverdampft mit dem Akzeptormolekül F6-TCNNQ und p-dotierte Mischschichten der Absorbermaterialien ZnPc und C60 gezeigt, erzeugt Dotierung relativ flache Störstellen. Abschließend werden verschiedene organische Lochtransporter-Materialien auf ihre Stabilität in Wasser- und Sauerstoffatmosphären während der Prozessierung und der Lagerung fertiger elektronischer Bauelemente untersucht. Für Pentazen, ZnPc, MeO-TPD und m-MTDATA werden Löcherfallen in intrinsischen Dünnschichten nachgewiesen. Bei Kontakt mit Sauerstoff nimmt deren Defektdichte zu. Es findet sich ein universales Fallenniveau bei rund 4.7...4.8 eV, verursacht durch Sauerstoffverunreinigungen, welches den Lochtransport in organischen Halbleitern limitiert.

Die heterogene Struktur von aus Rattenhirn isolierten Synaptischen Vesikeln wird untersucht mittels Daten aus Kleinwinkel-Röntgenstreuexperimenten unter Berücksichtigung von Daten erhalten durch cryogene Elektronenmikroskopie, dynamische Lichtstreuung und biochemische Analysen. Es werden niedrig aufgelöste Strukturmodelle des funktionellen Synaptischen Vesikels unter quasi-physiologischen Bedingungen vorgeschlagen. Details des Dichteprofils der Membran, einschließlich Beiträgen von Lipiden und Proteinen werden bestimmt. Die typische Konformation und die allgemeine laterale Organisation der Proteine in Mikrodomänen werden ermittelt. Entropische Beiträge zur freien Energie aufgrund möglicher Bildung und Auflösung der Proteinmikrodomänen auf dem Synaptischen Vesikel werden untersucht. Ferner werden zellfreie Fusionssysteme mittels dynamischer Lichtstreudaten charakterisiert und mögliche Anwendungen von Kleinwinkel-Röntgenstreuung für die Untersuchung von Membran-Fusionsprozessen erörtert.