Lagerhantering avser aktiviteter som mottagning av varor, inlagring, lagring, orderplockning, omlagring, sortering och frakt. Enligt tidigare studier, av bland annat Drury (1988), uppstår 55% - 60% av lagrets kostnader i orderplockning och omlagring. Idag finns teorier och modeller om hur lagerhantering kring orderplockning och omlagring kan optimeras. Dock behandlas bulklager sällan i forskning eller litteratur. Detta arbete hade således i syfte att undersöka vedertagen teoris anpassningsförmåga på en verksamhet med bulklager. Studien har uppfyllt syftet genom en fall- och litteraturstudie med både kvalitativa och kvantitativa tillvägagångssätt i form av intervjuer och observationer. Lagerutformning och lagerstyrning kan med fördel ses som grundläggande metoder som förutsätter effektivitetsutveckling inom plockning och omlagring i bulklager. Metoder som MUDA och 5S skapar förutsättningarna att identifiera, upprätthålla och genomföra effektivitetsförbättringar.  De vedertagna metoderna som studerats kunde genom observation och intervju konstateras som implementerbar eller icke implementerbar. Som sammanfattning kunde en övergripande mall av metoderna sammanställas där det gemensamt och separat kunde bidra till effektivisering. Fallföretaget kunde förses med förbättringsförslag som rekommenderas att införas i både mindre etapper och under större, mer omfattande projekt. / Inventory management refers to activities such as receiving goods, storing, in storage, order picking, rearranging, sorting and shipping. According to previous studies, by Drury (1988), 55% - 60% of the warehouse costs incur in order picking and rearrangement. Today there are theories and models on how inventory management around order picking and rearrangement can be optimized. However, bulk stocks are rarely addressed in research or literature. Thus, this work was aimed at examining the adaptive theory of customary methods in a business with bulk storage. The study has fulfilled its purpose through a case and literature study with both qualitative and quantitative approaches in the form of interviews and observations. Inventory design and inventory control can advantageously be seen as basic methods that require efficiency development in picking and rearranging in bulk storages. Methods such as MUDA and 5S create the conditions for identifying, maintaining and implementing efficiency improvements. The customary methods studied could, through observation and interview, be found to be implementable or non-implementable. In summary, an overall template of the methods could be compiled where they could jointly and separately contribute to efficiency improvements. The studied company could be provided with improvement proposals that are recommended to be introduced in both smaller stages and during larger, more extensive projects.

LKAB Mekaniska i Kiruna, Sverige är en ståltillverkare som bland annat producerar avropsartikeln lingenomföring till moderbolaget LKAB. Målet med detta examensarbete är att minska på leveranstiden för sistnämnda artikel. För att åstadkomma detta undersöktes produktionsflödet i affärssystemet Monitor. Därtill genomfördes en litteraturstudie och intervjuer hölls med avdelningschefer och operatörer från LKAB Mekaniska. Utifrån detta identifierades tre faktorer som påverkar leveranstiden negativt. Dessa är kötiderna mellan operationerna, den bristfälliga planeringen som skedde vid skär- och maskinavdelningen, samt begränsningarna som höll upp produktionen i maskinavdelningen Vi hävdar att leveranstiden minskar om följande åtgärder genomförs: eliminera kötiderna mellan tillverkningsprocesserna, öka beläggningen och kapaciteten på tillverkningsmaskinen, implementera ett kanbansystem, ändra ordningsföljden i tillverkningsprocessen och slutligen införa ett säkerhetslager med färdigsvarvade stänger. / LKAB Mekaniska in Kiruna, Sweden is a steel-manufacturer that, among other things, produces lingenomföring for its parent company LKAB. The aim of this thesis is to decrease the delivery time of the aforementioned product. In order to achieve this, production flow in the business system Monitor ERP (Enterprise Resource Planning) was examined. In addition to this a literature study was conducted and interviews were held with department heads and machine operators from LKAB Mekaniska. Based on data collected, three factors were identified as negatively affecting the delivery time. These are queue times between operations, inadequate planning for the cutting and machinery department, as well as the limitations that kept the production back in the machinery department. We claim that the delivery time decreases if the following measures are realized: eliminate queue times between stages in the manufacturing process, increase personnel capacity related to the manufacturing machine, implement a kanban system, change the order of the manufacturing process and lastly to introduce a storage of ready-turned bars.

This master’s thesis is devoted to problematic of selection of suitable flow directions in double pipe heat exchanger. First chapter is oriented to the construction of tube heat exchangers. It is also discussed impact of construction solution to the flow character and changing of his process parameters. The difference between parallel and countercurrent flow is also occurred in this parts. The next chapter is focused to the basics of heat-hydraulic calculations of heat exchanger. This also means explanation of ways of heat transfer and heat exchanger function. There are told about specific access to the solving problem of fluid laminar flow. The third chapter is detailed focused to the calculating of heat exchanger. At first is discussed factors, which have impact to the flow character. Next are detailed descriptions of design and controlling calculations, including more alternative ways to solve it. Next chapter exploit those results for deciding, which flow arrangement will be better for given case. Last chapter contain realization and reformulating of process heat exchanger calculating to the program code in Maple. There is also description of used algorithms and operating with them, so any user could be able to work with it. In this master’s thesis are used many examples from attached programs on different parts.

<p>The internal and external challenges construction companies face such as variability, low productivity, inefficient processes, waste, uncertainties, risks, fragmentation, adversarial contractual relationships, competition, and those resulting from internal and external challenges such as cost overruns and delays negatively affect company performance and profitability. Though research publications abound, these challenges persist, which indicates that the following gaps exist. Lean construction, process improvement, and performance improvement research have been conducted wherein improvement principles, and best practices are used to ameliorate performance issues, but several knowledge gaps exist. Few companies use these improvement principles and best practices. For those companies applying improvements, there is no established link between these improvements and performance/profitability to guide companies. Further, even when companies use improvement principles and best practices, they apply only one or two, whereas an integrated application of these improvement principles and best practices would be more effective. The other gap the author identified is the lack of strategic tools that construction companies can use to improve and manage their profitability. This thesis tried to fill the knowledge gap, at least partially, by developing a two-part excellence model for profitability improvement of construction companies. The excellence model lays out strategies that would enable companies to overcome the challenges and improve their profitability. The excellence model also gives an iterative and recursive continuous improvement model and flowchart to improve the profitability of construction companies. The researcher used high impact principles, guidelines, and concepts from the literature on organizational effectiveness, critical success factors, strategic company profitability growth enablers, process improvement, and process maturity models, performance improvement, and organizational excellence guidelines to develop the two-part excellence model.</p> <p>The author also translated the two-part excellence model into the diagnostic tool and Decision Support System (DSS) by use of process diagrams, fishbone diagrams, root cause analysis, and use of improvement principles, countermeasures and best practices at the most granular (lowest intervention) levels to do away with root causes of poor performance. The author developed the diagnostic tool and Decision Support System (DSS) in Access 2016 to serve as a strategic tool to improve and manage the profitability of construction companies. The researcher used improvement principles, and best practices from scientific and practitioner literature to develop company and project process flow diagrams, and fishbone (cause and effect) diagrams for company, department, employee, interactions and project performance for the profitability improvement, which are the engines of the diagnostic tool and DSS. The diagnostic tool and DSS use continuous improvement cycles iteratively and recursively to improve the profitability of construction companies from the current net profit of 2-3 percent to a higher value.</p>

The wastewater treatment plays an important role in the maintenance of natural water resources. However, regardless of the technology used or the level of treatment required, the treatment plants of the XXI century are highly complex systems that not only need to meet technical requirements, but also environmental and economic criteria. In this context, decision support systems for environmental domains (English, Environmental Decision Support Systems or EDSS) are configured as an effective tool to support the selection and evaluation of integrated water treatment alternatives. The EDSS designed can be defined as interactive software, flexible and adaptable, which links the numerical models / algorithms, techniques and environmental ontologies, knowledge-based environment, and is capable of supporting decision making, either in choosing between different alternatives, improving potential solutions, or in the integrated assessment using methodologies ranging from environmental (Life Cycle Analysis) to economic / La depuració d’aigües residuals juga un paper fonamental en el manteniment dels recursos hídrics naturals. Tanmateix, sigui quina sigui la tecnologia emprada o el nivell de depuració requerit, les plantes de tractament del segle XXI són sistemes d’alta complexitat, que no només han de satisfer requeriments de tipus tècnic, sinó també de tipus ambiental i econòmic. En aquest context, els sistemes de suport a la decisió en dominis ambientals (en anglès, Environmental Decision Support Systems o EDSS) es configuren com una eina eficaç per donar suport a la selecció i a l’avaluació integrada de diferents alternatives de depuració d’aigües. El EDSS dissenyat pot definir-se com un programari interactiu, flexible i adaptable, que vincula els models numèrics/algoritmes amb tècniques basades en el coneixement i ontologies ambientals, i que és capaç de donar suport a la presa de decisió, ja sigui en l’elecció entre diferents alternatives, millorant una solució, o bé en l’avaluació integrada a través de metodologies ambientals (Anàlisi de Cicle de Vida) i econòmiques

Materialet i rapporten är 10% av det totala materialet som presenterats till SCA, de viktigaste resultaten redovisas i rapporten. Vid SCA:s sågverk Rundvik i Nordmaling finns en automatiserad emballeringsmaskin. Ingen bra anvisning för bruk/drift och underhåll för maskinen finns, vilket har gjort det svårt för personalen att hantera den. Syftet med detta arbete var att kartlägga maskinens delar, funktioner och därefter framta en bruksanvisning. Detta gjordes genom att först kartlägga placeringen av maskinens axlar samt dess funktioner. Därefter intervjuades personalen på hyvleriet för att reda ut svårigheter och problem med maskinen. En problemlösning som löser de mest förekommande felen har framställts. En underhållsplan har tagits fram för att underlätta underhåll av maskinen. En offert på en programuppdatering har skickats till maskinprogrammerare. En offert gällande en säkerhetsanordning till maskinen har skickats till maskintillverkare. Resultatet är en fullt användbar, enkelt läsbar bruksanvisning. Syftet har inte fullföljts helt då operatör inte hunnit testa instruktionerna. / The material in the report is 10% of the total material presented to SCA, the most important results are reported here. At SCA's sawmill Rundvik in Nordmaling, there is an automated packaging machine. There is no good user manual for use/operation and maintenance of the machine, which has made it difficult for the staff to handle it. The purpose of this work has been to map the machine's parts, functions and then produce a user manual. This was done by first mapping the location of the machine's axles and its functions. The staff at the planer were then interviewed to sort out difficulties and problems with the machine. A problem solution that solves the most common errors has been produced. A maintenance plan has been developed to facilitate maintenance of the machine. A quote for a software update has been sent to the machine programmer. A quote regarding a safety device for the machine has been sent to the machine manufacturer. The result is a fully usable, easy-to-read user manual. The purpose has not been fully fulfilled as the operator has not had time to test the instructions.