- About
-
The Global ETD Search service is a free service for researchers
to find electronic theses and dissertations. This service is
provided by the
Networked Digital Library of Theses and Dissertations.
Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
Search results
Showing 271 to 278 of 278 (0.134 seconds)| 271 |
FC³ - 1st Fuel Cell Conference Chemnitz 2019 - Saubere Antriebe. Effizient Produziert.: Wissenschaftliche Beiträge und Präsentationen der ersten Brennstoffzellenkonferenz am 26. und 27. November 2019 in Chemnitzvon Unwerth, Thomas, Drossel, Welf-Guntram 25 November 2019 (has links)
Die erste Chemnitzer Brennstoffzellenkonferenz wurde vom Innovationscluster HZwo und dem Fraunhofer-Institut für Werkzeugmaschinen und Umformtechnik IWU durchgeführt. Ausgewählte Fachbeiträge und Präsentationen werden in Form eines Tagungsbandes veröffentlicht. / The first fuel cell conference was initiated by the innovation cluster HZwo and the Fraunhofer Institute for Machine Tools and Forming Technology. Selected lectures and presentations are published in the conference proceedings.
|
| 272 |
Control of stack emissions using hydrated lime injections during incineration of healthcare risk waste : a case study of Biomed in BenoniThemba, Nomathemba 01 1900 (has links)
Abstract in English / Incineration is still a widely utilised method for treating healthcare risk waste in the Republic of South Africa. As much as incinerators are needed, the fact that they are still a critical source of hazardous toxic air pollutants that are not easy to manage cannot be disregarded. The Ministry of Environmental Affairs has promulgated a new regulation for General and Hazardous Waste Thermal Treatment. This exceedingly stringent air pollution legislation requires that existing incinerators be modified or redesigned to meet the new air quality standards, or face closure in the event that they fail to comply. The regulation contains strict emission requirements for concentrations of stack gases such as CO2, NO2, NOx, HCl, HF, CO, SO2, as well as TOC and PM. To be certain that emissions are within the standard, incineration facilities are instructed to reduce the acid gas emissions and to have permanent on-line monitoring equipment for stack testing of regulated pollutants. Since the promulgation of the new legislation in April 2015, none of the incinerators in South Africa has been able to achieve the new requirements. This study, based on the quantitative approach, was conducted in search of a cost-effective method of controlling acid gas emissions from incinerators without major adjustments to the plants. During the study, 60 kg of sorbacal Ca(OH)2 was injected into a lime feeder every day. A variable speed drive was used to inject Ca(OH)2 into the furnace continuously at a rate of between 2.5 kg/h and 3.5 kg/h. The temperature was maintained between 850°C and 1200°C with the use of four gas burners. Two manual blowers were utilised to ensure a continuous flow of Ca(OH)2 into the reaction chamber and filtration system.
Comparative analysis was done to compare gas emission levels before and after the use of hydrated lime. Descriptive statistics were used to compute the mean, frequency and
percentages, while Wilcoxon sign rank test established whether hydrated lime was significant in reducing gaseous emissions or not. Wilcoxon sign rank test showed a statistically significant difference (P<0.05) in the reduction of all gaseous emissions using hydrated lime, except particulate matter where there was a significant increase in emissions. This technology was able to achieve high removal efficiency of 97% for HCl, 86% for HF, 83% for NOx, 87% for SO2 and 74% for NO2. The optimum temperature for SO2 and NOx was 1020°C. For HCl it was between 1190°C and 1200°C, and for NO2 it was between 1120°C and 1200°C. The amount of particulate matter increased along with the concentration of the Ca(OH)2 injections. Ca(OH)2 was found to be cost effective in the controlling and capturing of gaseous emissions. It is recommended that combustion requirements, such as heat, oxygen and turbulence, be considered to reduce the amount of gases generated during the incineration of healthcare risk waste. It is also recommended that electrostatic precipitators be used instead of fabric filters
to improve the efficiency of capturing the particulate matter. / Environmental Sciences / M.Sc. (Environmental Science)
|
| 273 |
Eliminating Cash; cash-free corporate liquidity : A study on the plausibility and efficiency of financial leanCharpentier, Viktor January 2019 (has links)
This paper addresses the problem of a failing net debt approach; deposited funds rarely compensate the cost of debt. Venturing into operational credit facilities, the study evaluates the efficiency and feasibility of transitioning into fully cash-free liquidity management. The study takes a holistic approach and evaluates the research questions from the perspective of management through case studies on four smaller Swedish industrial firms. The study finds that there is substantial potential to free up capital; return on equity could have been boosted by an annual 5-10 percent including substantial one-off distributions. The study also concludes that Agency reasons are strong reasons for why firms are carrying material cash reserves. Through qualitative interviews, the study identifies several additional, but not less important, obstacles in the way of a full out cash-free transition. Most significantly, the financial system is not offering fully committed long term operational credit facilities and operating across different jurisdictions complicates the consolidation of liquidity. The study concludes that the matter would not have vast negative implications on real business activities, although further research would be required in regard to an extended debt overhang problem. / Uppsatsen kretsar kring den fallerande logiken med begreppet nettoskuld; tillgodohavanden på bank genererar sällan upp för kostnaden relaterad till motsvarande skuld. Med utgångspunkt i operationella kreditstrukturer utvärderas möjliga effektivitetsvinster och genomförbarheten av en fullständig övergång till kassa-fri likviditetshantering. Studien har ett holistiskt angreppssätt och utvärderar frågeställningarna från ett management-perspektiv genom fallstudier på fyra mindre svenska industriella bolag. Studien finner betydande möjligheter att frigöra kapital; årliga avkastningen på eget kapital hade kunnat öka med 5–10 procent och betydande engångsutdelningar hade varit möjliga. Studien finner vidare att agentteorin är en stark anledning till att bolag bär betydande kassapositioner. Genom kvalitativa intervjuer identifierar studien ytterligare, men ej desto mindre betydande, hinder för en kassa-fri övergång. Mest betydelsefullt, är att nuvarande finansiella system inte erbjuder för syftet fullgoda kreditstrukturer, samt det faktum att företag med verksamhet över olika jurisdiktioner upplever juridiska svårigheter med att konsolidera likviditet. Studien drar slutsatsen att en övergång inte skulle medföra betydande negativa konsekvenser för den operativa affärsverksamheten, men identifierar samtidigt att ytterligare studier skulle vara nödvändiga framförallt kring hur finansiella incitament kopplade till agent-teorins ’debt overhang’ skulle förändras vill en övergång till en fullt garanterad operationell kreditstruktur.
|
| 274 |
Územní studie „Zbrojovka“ / Town planing study "Zbrojovka"Bílek, František January 2012 (has links)
The aim of this thesis is a revitalization of the grounds once belonging to Zbrojovka Brno. These grounds are in the zoning map defined as “brownfield”. Within Brno’s limits, the area has an extremely convenient location. Since the grounds are situated in the central part of Brno, the complex is in terms of traffic and transport in the vicinity of both, the current and the newly planned ring-road. Important factors influencing the project are the river Svitava which borders the west side of the area, and a railroad corridor skirting the east side of the location. Assigned area was, for the purposes of this thesis, expanded by the grounds once belonging to Zetor and the adjoining area towards Markéty Kuncové Street. Several buildings from the former grounds, which fit in into the urban concept and were in good technical conditions, have been preserved. From a functional point of view, the newly designed grounds will meet all the requirements for a fully independent municipal district. The multifunctional development contains primarily housing complexes, administrative buildings, public facilities, recreational areas, as well as other functional structures. The urban concept of this project is a result of a study of surrounding blocks. Based on an analysis of the size and height of these buildings, an idealized block was designed and then recreated into a symmetrical raster of blocks with the street width of 20m. This raster was subsequently applied to newly designed points of entry into the area. Total urban and mass proposal of the development areahas been further influenced by principal conceptual points. Among these conceptual points belong the perspective axes which connect the conceptual points with an orientation point, in this case the former factory’s smokestack. Creating a new arm for the Svitava River is another point. Taking into account that the whole vicinity of the factory grounds is without quality public greenery elements.
|
| 275 |
Validation and application of advanced soil constitutive models in numerical modelling of soil and soil-structure interaction under seismic loadingKowalczyk, Piotr Jozef 23 September 2020 (has links)
This thesis presents validation and application of advanced soil constitutive models in cases of seismic loading conditions.
Firstly, results of three advanced soil constitutive models are compared with examples of shear stack experimental data for free field response in dry sand for shear and compression wave propagation. Higher harmonic generation in acceleration records, observed in experimental works, is shown to be possibly the result of soil nonlinearity and fast elastic unloading waves. This finding is shown to have high importance on structural response, real earthquake records and reliability of conventionally employed numerical tools. Finally, short study of free field response in saturated soil reveals similar findings on higher harmonic generation.
Secondly, two advanced soil constitutive models are used, and their performance is assessed based on examples of experimental data on piles in dry sand in order to validate the ability of the constitutive models to simulate seismic soil-structure interaction. The validation includes various experimental configurations and input motions. The discussion on the results focuses on constitutive and numerical modelling aspects. Some improvements in the formulations of the models are suggested based on the detailed investigation.
Finally, the application of one of the advanced soil constitutive models is shown in regard to temporary natural frequency wandering observed in structures subjected to earthquakes. Results show that pore pressure generated during seismic events causes changes in soil stiffness, thus affecting the natural frequency of the structure during and just after the seismic event. Parametric studies present how soil permeability, soil density, input motion or a type of structure may affect the structural natural frequency and time for its return to the initial value. In addition, a time history with an aftershock is analysed to investigate the difference in structural response during the earthquake and the aftershock.
|
| 276 |
Étude du comportement mécanique à rupture des alumines de forte porosité : Application aux supports de catalyseurs d'hydrotraitement des résidus / Mechanical behaviour at fracture of highly porous aluminas : Application to catalyst supports for residues hydrotreatingStaub, Déborah 29 September 2014 (has links)
La présente étude porte sur le comportement mécanique de deux types de supports de catalyseurs utilisés industriellement en hydrotraitement des résidus. Ces supports extrudés, fabriqués par IFPEN, sont constitués d’alumine de transition γ avec un taux de porosité proche de 70%. La porosité du premier matériau est uniquement constituée de mésopores (< 50 nm). La porosité du second matériau est constituée de mésopores et de macropores (jusqu’à 20 µm). Les niveaux de sollicitation en service étant très peu connus, cette étude s’attache à décrire de manière précise et exhaustive le comportement mécanique de ces supports sous une large gamme de sollicitations, et à identifier les différents mécanismes de ruine possibles. L’objectif final est de mieux comprendre les relations entre les paramètres microstructuraux et les propriétés mécaniques afin d’identifier des leviers d’amélioration de la tenue mécanique des supports. Dans un premier temps, une méthodologie adaptée de caractérisation mécanique est établie. Le comportement des supports est étudié d’une part en traction, à l’aide d’essais de flexion trois points et d’écrasement diamétral, et d’autre part, en compression sous différents taux de triaxialité, à l’aide d’essais de compression uniaxiale et hydrostatique et d’essais de micro-indentation sphérique. Les différents mécanismes responsables de la ruine des supports sont identifiés au moyen de techniques d’imagerie telles que la microscopie électronique à balayage et la micro-tomographie à rayons X. En traction, le comportement est fragile avec l’amorçage de la rupture sur un défaut critique. En compression, une transition fragile / quasi-plastique du comportement est observée avec l’augmentation du taux de confinement. Cette quasi-plasticité s’exprime en particulier à travers un phénomène de densification de la macroporosité. Dans un deuxième temps, un critère de rupture est identifié pour chaque type de matériau en vue de représenter sur une même surface de charge les différents types de comportement et phénomènes physiques observés. Cette identification est réalisée en couplant les essais d’indentation sphérique à une analyse numérique. Des critères faisant intervenir la pression hydrostatique permettent de rendre compte de la forte dissymétrie du comportement des matériaux en traction et en compression. Enfin, dans un souci de se rapprocher des sollicitations subies par les supports de catalyseurs dans un réacteur en service, le comportement d’un empilement de supports est étudié en compression œdométrique. L’analyse de cet essai par tomographie à rayons X permet de déterminer les différents mécanismes de ruine intervenant au sein d’un empilement, en particulier ceux responsables de la génération de fines. Les résultats illustrent la pertinence de la caractérisation en flexion et en indentation des supports de catalyseurs seuls pour prévoir leur comportement au sein d’un empilement en compression. / In this work, we study the mechanical behaviour of two types of catalysts supports produced by IFPEN and industrially used in residues hydrotreating. Those extruded supports are made of transition γ-alumina with about 70% of porous volume. The first material’s porosity is exclusively composed of mesopores (< 50 nm). The porosity of the second material is composed of both mesopores and macropores (up to 20 µm). Because of the limited knowledge of the stress fields in embedded catalysts supports in use in a reactor, this study aims at precisely and exhaustively describing the mechanical behaviour of those supports under a wide range of stresses, and identifying the possible damage mechanisms. The final objective is to better understand the influence of microstructural parameters on the mechanical properties of the supports in order to propose some leads about how to improve their mechanical strength. First, an adequate mechanical characterization methodology is set. On one hand, the tensile mechanical behaviour of the supports is studied with three-point bending and diametrical crushing tests. On the other hand, their compressive behaviour under various triaxiality rates is characterized in uniaxial and hydrostatic compression, and by spherical micro-indentation. The different damaging mechanisms are identified by imaging techniques such as scanning electronic microscopy and X-ray micro-tomography. Under tensile stresses, the supports exhibit a brittle behaviour and fracture initiates at a critical flaw. Under compressive stresses, a brittle/quasi-plastic transition is observed with increasing the triaxiality rate. The quasi-plasticity is mainly due to the densification of the macroporosity. The second part of the study consists in identifying, for each material, a fracture criterion able to represent every types of behaviour and physical phenomena observed on the same yield surface. This identification is achieved by coupling the spherical indentation tests to a numerical analysis. Fracture criteria involving hydrostatic pressure are well suited to describe the highly dissymmetric mechanical behaviour of the materials in tension and in compression. The last part of this work aims at studying the mechanical behaviour of a stack of supports under œdometric compression in order to produce stress fields more representative of those existing within the supports stacked in a reactor. This test is analysed by X-ray tomography, which allows us to determine/acknowledge the different damaging mechanisms involved in fragments and fines generation. The results illustrate the suitability of the bending and indentation tests to characterize the mechanical properties of a single support and relate them to its mechanical behaviour in a stack of supports under compression.
|
| 277 |
BBT Acoustic Alternative Top Bracing CADD Data Set-NoRev-2022Jun28Hemphill, Bill 22 July 2022 (has links)
This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are (a) a one-piece base for the standard kit's (Martin-style) bracing, (b) 277 Ladder-style bracing, and (c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.
The CADD data set for each of the three (3) top bracing designs includes (a) a nominal 24" x 18" x 3mm (0.118") Baltic birch plywood laser layout of (1) the one-piece base with slots, (2) pre-radiused and pre-scalloped vertical braces with tabs to ensure proper orientation and alignment, and (3) various gages and jigs and (b) a nominal 15" x 20" marking template.
The 'provided as is" CADD data is formatted for use on a Universal Laser Systems (ULS) laser cutter digital (CNC) device. Each CADD drawing is also provided in two (2) formats: Autodesk AutoCAD 2007 .DWG and .DXF R12. Users should modify and adapt the CADD data as required to fit their equipment. This CADD data set is released and distributed under a Creative Commons license; users are also encouraged to make changes o the data and share (with attribution) their designs with the worldwide acoustic guitar building community.
|
| 278 |
BBT Acoustic Alternative Top Bracing CADD Data Set-NoRev-2022Jun28Hemphill, Bill 22 July 2022 (has links)
This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are (a) a one-piece base for the standard kit's (Martin-style) bracing, (b) 277 Ladder-style bracing, and (c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars.
The CADD data set for each of the three (3) top bracing designs includes (a) a nominal 24" x 18" x 3mm (0.118") Baltic birch plywood laser layout of (1) the one-piece base with slots, (2) pre-radiused and pre-scalloped vertical braces with tabs to ensure proper orientation and alignment, and (3) various gages and jigs and (b) a nominal 15" x 20" marking template.
The 'provided as is" CADD data is formatted for use on a Universal Laser Systems (ULS) laser cutter digital (CNC) device. Each CADD drawing is also provided in two (2) formats: Autodesk AutoCAD 2007 .DWG and .DXF R12. Users should modify and adapt the CADD data as required to fit their equipment. This CADD data set is released and distributed under a Creative Commons license; users are also encouraged to make changes o the data and share (with attribution) their designs with the worldwide acoustic guitar building community.
|
Page generated in 0.2119 seconds