Arbetet undersökte hur hotfull betraktaren uppfattade en varelse utifrån olika grader av våta alternativt torra ytegenskaper, genom enbart visuell perception. Arbetet inleds med en genomgång av tidigare forskning kring visuell perception, ytors relationer till fruktan samt hotfullhet i form och färg. Definitioner för begreppen ”Yta” och ”våt- och torrhet” skapades även, med vetenskapliga belägg. Artefakten som skapades för arbetet bestod av 10 stycken 2D-bilder, indelade i två bildserier med olika färgmättnad. Bilderna föreställde en och samma varelse som skapades med olika grader av våt- och torrhet på dess yta. En kvantitativ webbenkät användes för att undersöka respondenterna upplevda hotfullhet hos de olika bilderna. Resultatet visade att respondenterna upplevde bilderna som mer hotfulla ju våtare de blev, men ökningen i hotfullhet var marginell, andra faktorer verkade spela större roll i hur hotfull varelsen upplevdes.

Additive manufacturing (AM), also called 3D-printing, are technologies where parts are formed from the bottom up by adding material layer-by-layer on top of each other. Electron Beam Melting (EBM) is an AM technique capable of manufacturing fully solid metallic parts, using a high-intensity electron beam to melt powder particles in layers to form finished components. Compared to conventional machining, EBM offers enhanced efficiency for production of customized and patient specific parts such as e.g. dental prosthetics. However, dental prosthetics are challenging to produce by EBM, as their small sizes mean that mechanical and surface properties may be altered as part sizes decreases. The aim of this thesis is to gain new insights that could lead to optimization for production of small sized components in the EBM. The work is focused to understand the process-property relationships for small size components production. To improve the surface resolution and part detailing, a smaller sized powder was used for production and compared to parts made with standard sized powder. The surface-, chemical and mechanical properties were evaluated for parts produced with both types of powders. The results indicate that the surface roughness may be influenced by powder and build layer thickness size, whereas the mechanical properties showed no influence of the layer-wise production. However, the mechanical properties are dependent on part size. The outermost surface of the parts consists of a surface oxide dominated by TiO2, formed as a result of reaction between the surface and residual gases in the EBM build chamber. The surface oxide thickness is comparable to that of a conventionally machined surface, but is dependent on build height. This work concludes that the surface resolution and component detailing can be improved by various measures. Provided that proper process themes are used, the EBM manufactured material is homogenous with properties comparable to conventional produced titanium. It has also been shown that the material properties will be altered for small components. The results point towards different ways of optimizing manufacturing of dental prosthetics by EBM, which will make dental prosthetics available for an increased number of patients.

Today there is growing interest within the construction sector to increase the proportion of biobased building materials made from renewable resources. By-products or residuals from wood processing could in this case be valuable resources for manufacturing new types of biocomposites. An important research question related to wood-based biocomposites is how to characterise molecular interactions between the different components in the composite. The hygroscopic character of wood and its water sorption properties are also crucial. Thermal modification (or heat treatment) of wood results in a number of enhanced properties such as reduced hygroscopicity and improved dimensional stability as well as increased resistance to microbiological decay. In this thesis, surface characteristics of thermally modified wood components (often called wood fibres or particles) and influencing effects from moisture sorption have been analysed using a number of material characterisation techniques. The aim is to increase the understanding in how to design efficient material combinations for the use of such wood components in biocomposites. The specific objective was to study surface energy characteristics of thermally modified spruce (Picea abies Karst.) under influences of water vapour sorption. An effort was also made to establish a link between surface energy and surface chemical composition. The surface energy of both thermally modified and unmodified wood components were studied at different surface coverages using inverse gas chromatography (IGC), providing information about the heterogeneity of the surface energy. The water vapour sorption behaviour of the wood components was studied using the dynamic vapour sorption (DVS) method, and their surface chemical composition was studied by means of X-ray photoelectron spectroscopy (XPS). Additionally, the morphology of the wood components was studied with scanning electron microscopy (SEM). The IGC analysis indicated a more heterogeneous surface energy character of the thermally modified wood compared with the unmodified wood. An increase of the dispersive surface energy due to exposure to an increased relative humidity (RH) from 0% to 75% RH at 30 ˚C was also indicated for the modified samples. The DVS analysis indicated an increase in equilibrium moisture content (EMC) in adsorption due to the exposure to 75% RH. Furthermore, the XPS results indicated a decrease of extractable and a relative increase of non-extractable compounds due to the exposure, valid for both the modified and the unmodified wood. The property changes due to the increased RH condition and also due to the thermal modification are suggested to be related to alterations in the amount of accessible hydroxyl groups in the wood surface. Recommendations for future work and implications of the results could be related to knowledge-based tailoring of new compatible and durable material combinations, for example when using thermally modified wood components in new types of biocomposites for outdoor applications. / <p>Forskningsfinansiärer och strategiska forskningsprojekt:</p><p>Nils och Dorthi Troëdssons forskningsfond (Projektnr 793/12 Hydro-termo-mekanisk modifiering av trä).</p><p> KTH Royal Institute of Technology.</p><p> COST Action FP0904.</p><p> KK-Stiftelsen.</p><p>Stiftelsen för strategiskt forskning (SSF). QC 20150908</p>

Optical scattering measurement devices are used to measure light reflection and light scattering from materials, to obtain data of the surface and bulk properties of materials. The measurement data are often used in research and development projects where material requirements are important, also for quality control in manufacturing processes, in different optical simulations and can be used for photorealistic rendering. In this master thesis project conducted at AFRY, a multifunctional team will develop an optical scattering measurement device that aims to collect data more accurately than current devices on the market. This thesis will focus on the mechanical design of the device which consists of the stability and movement of the components, the environment of the measurements and material selection with a focus on performance and sustainability. The optical model that will act as a basis for the development will be a gonioreflectometer consisting of a material sample, sample holder, light source, detector and an environment in which the measurements are conducted. Some of the physical, cognitive and emotional needs of the intended user are efficient use, low risk of misuse, reliable and high precision. A thorough requirement specification was made as a framework for the concept generation. The selected concept provides the movement of the optical components with an angular step enabling the desired optical scattering measurement. The selected stepper motor and gear ratio provides the flexibility of the movement, making it easy for the user to change angular steps of the optical components, enabling both fine and rough measurements. A separating screen was chosen for both concepts in order to avoid light contamination between measurements and the material sample holder resembles a frame that allows for mounting the material sample outside of the device. The mechanical system has a high stability and the material black anodized aluminum further contributes to the sturdiness of the construction. A physical prototype was created to validate the movement, since the movement of the detector and light source will be similar, only the detector movement was prototyped. The prototype showed that the movement of the detector worked in the desired way, hence the construction of the movement is approved. The scope was delimited in consensus with the project members and supervisors due to the time frame, hence there is future work on the device that should be accounted for. In conclusion, the purpose of the project was fulfilled after delimiting the goals and a conceptual solution was created that fulfilled the requirements of the project. / Optiska mätinstrument används för att mäta ljusreflektion och ljusspridning från material, för att erhålla data om materialets yt- och bulkegenskaper. Mätdata används ofta i forsknings- och utvecklingsprojekt där materialkrav är viktiga, även för kvalitetskontroll i tillverkningsprocesser, i olika optiska simuleringar och kan användas för fotorealistisk rendering. I detta examensarbete, genomfört på AFRY, kommer ett multifunktionellt team att utveckla en optisk spridningsmätningsenhet som syftar till att samla in data mer noggrant. Denna avhandling kommer att fokusera på den mekaniska designen av enheten som består av stabiliteten och rörelsen av komponenterna, mätmiljön och materialval med fokus på prestanda och hållbarhet. Den optiska modellen som kommer att ligga till grund för utvecklingen kommer att vara en gonioreflektometer bestående av ett materialprov, provhållare, ljuskälla, detektor och en miljö där mätningarna genomförs. Några av de fysiska, kognitiva och emotionella behoven hos den avsedda användaren är effektiv användning, låg risk för felanvändning, pålitlighet och hög precision. En noggrann kravspecifikation gjordes som en ram för konceptgenereringen. Det valda konceptet möjliggör rörelse av de optiska komponenterna med ett vinkelsteg som tillåter den önskade optiska spridningsmätningen. Den valda stegmotorn och utväxlingen ger flexibilitet i rörelsen, detta bidrar till att det är enkelt för användaren att ändra vinkelstegen för de optiska komponenterna, vilket tillåter både fina och grova mätningar. En avskiljningsskärm valdes för att undvika ljuskontaminering mellan mätningarna och materialprovhållaren liknar en ram där materialprovet monteras utanför enheten. Det mekaniska systemet har en hög stabilitet och materialet svart anodiserad aluminium bidrar till konstruktionens robusthet. En fysisk prototyp skapades för att validera rörelsen, eftersom rörelsen av detektorn och ljuskällan kommer att vara liknande, återskapades endast detektorns rörelse. Prototypen visade att detektorns rörelse fungerade på önskat sätt, därmed godkänns konstruktionen av rörelsen. Projektets mål avgränsades i samförstånd med projektmedlemmarna och handledarna på grund av tidsramen, därmed finns det framtida arbete för mätinstrumentet som bör beaktas. Sammanfattningsvis uppfylldes projektets syfte efter att målen avgränsats och en konceptuell lösning skapades som uppfyllde projektets krav.