[pt] A tese de doutorado tem por objetivo avaliar os impactos decorrentes da implementação de estratégias de eficientizacão energética na indústria de papel e celulose. A motivação pela escolha do tema resultou da necessidade de obter ganhos de energia considerando aspectos que, usualmente, não são considerando em programas de eficiência de energética (i.e.: aspectos sociais, técnicos, econômicos e ambientais). A metodologia utilizada –Método Multicritério de Apoio à Decisão Fuzzy-AHP-TOPSIS– (i) permitiu selecionar as tecnologias de eficientização aplicáveis ao subsetor de papel e celulose e (ii) possibilitou avaliar a influência de cada critério e subcritério na hierarquização de alternativas de eficientização energética. Os resultados consolidados permitiram: (i) confirmar que mudanças tanto nos processos, quantos nas tecnologias transversais do subsetor de papel e celulose devem ser implementadas; (ii) identificar os principais critérios decorrentes da eficientização energética no âmbito social, técnico, econômico e ambiental. Como conclusão, a pesquisa avaliou a relevância de cada critério, sugerindo, inclui-los em programas brasileiros de eficiência energética. Assim, a pesquisa legitima a sua contribuição para o setor energético brasileiro, promovendo o desenvolvimento de novos estudos na área de eficiência energética. / [en] The goal of this work is to evaluate the impacts of the implementation of energy efficiency strategies in the pulp and paper industry. The motivation for choosing the theme resulted from the need to obtain energy gains considering aspects that, usually not considered in energy efficiency programs (i.e.: social, technical, economical and environmental aspects). The methodology used –Multicriteria Decision Making Method Fuzzy-AHP-TOPSIS – (i) allowed to select the efficiency technologies applicable to the pulp and paper sub-sector and (ii) made it possible to evaluate the influence of each criterion and sub-criterion in the hierarchy of alternatives of energy efficiency. The consolidated results allowed: (i) to confirm that changes in the processes and in the transversal technologies of the pulp and paper subsector must be implemented; (ii) identify the main criteria resulting from energy efficiency in social, technical, economic and environmental aspects. As a conclusion, this work evaluated the relevance of each criterion, suggesting that it be included in Brazilian energy efficiency programs. Thus, the research legitimizes its contribution to the Brazilian energy sector, promoting the development of new studies in the area of energy efficiency.

Ce travail de thèse a été réalisé dans le cadre d'un contrat avec l'ANR (ANR-09-VERS-013 « THID ») et porte sur le développement d'une nouvelle génération de tags Chipless à bas coûts fonctionnant dans le domaine THz, pour des applications d'identification et/ou authentification unitaire des articles commerciaux, des papiers d'identités, des personnes pour le contrôle d'accès... Les structures proposées, constituées d'un empilement périodique de couches diélectriques d'indices de réfraction différents, utilisent les propriétés particulières des cristaux photoniques 1D de présenter une réponse électromagnétique entrecoupée de bandes interdites photoniques (BIP). Toute perturbation de la périodicité de la structure engendre des pics dans les bandes interdites qui sont utilisés pour coder une information binaire. Cette structuration particulière des matériaux permet donc de manipuler précisément une signature électromagnétique. Pour des raisons liées à l'industrialisation (facilité de fabrication en masse) et aussi de coût, nous avons retenu des matériaux de base déjà couramment utilisés dans l'industrie papetière : le papier et le polyéthylène. Le choix de ces matériaux, qui doivent allier contraste d'indice élevé et faible absorption, représente une étape cruciale dans ce travail. Ainsi, à partir des résultats expérimentaux obtenus par spectroscopie THz dans le domaine temporel (THz-TDS) sur un grand nombre de matériaux, nous avons pu concevoir deux familles de tags sur la base de ces différents matériaux. Par ailleurs, nous avons développé deux méthodes de codage d'une information binaire, toutes deux basées sur l'absence ou la présence de pics dans une BIP, pics dont la position et le nombre dépendent bien évidemment des défauts de périodicité introduits. Pour des applications liées à l'identification, des capacités de codage de près de 20 bits ont été démontrées. Nous avons aussi montré que la richesse d'information contenue dans la réponse électromagnétique de ces Tags THz peut être utilisée pour les applications liées à l'authentification unitaire, en utilisant comme critère de discrimination le coefficient d'autocorrélation. Nous avons ainsi pu évaluer les performances d'un test d'authentification basé sur ce critère dans différents domaines d'analyse : temporel, fréquentiel et temps-fréquence. Nous avons montré qu'une étude du spectrogramme (combinant temps et fréquence) est ainsi bien plus pertinente qu'une étude dans les seuls domaines temporel ou fréquentiel. / This thesis work deals with the development of a new generation of low-cost Chipless tags operating in the THz frequency domain, it has been supported by the french national agency for research (ANR-09-VERS-013 « THID » ). It covers a wide area of applications such as the identification and/or unitary authentication of commercial items, identity papers, access control…To manufacture these tags, we proposed to use a periodic stack of dielectric material layers with different refractive index and whose thickness is of the order of the wavelength, commonly known as a one dimensional photonic crystal. The electromagnetic signature of such a structure exhibits photonic bandgaps (PBG), i.e. frequency windows in which light propagation is prohibited. We suggested modifying the periodicity of the crystal to create defect levels (peaks) for example in the 1st PBG to encode binary information. This particular structure allows to precisely tuned an electromagnetic signature. To ensure a mass and cost effective industrialization, we retained basic materials which are widely used in the pulp and paper industry: paper and polyethylene. The choice of these materials, which must combine high index contrast and low absorption, represents the first and a crucial step in this work. We characterize a wide range of materials using classical THz time domain spectroscopy (THz-TDS) and we propose two families of tags based on paper and polyethylene. Furthermore, we developed two methods to encode binary information, both based on the absence or presence of peaks in a PBG, peaks whose number and position depend on the introduced defects of periodicity. In a real identification test, a coding capacity of nearly 20-bit has been demonstrated. We also showed that the information contained in the electromagnetic response of these THz tags can be used for other applications related to the unitary authentication and by using the correlation coefficient as criterion for discrimination of the different signatures. Therefore, we evaluate the performance of an authentication test based on this criterion in various analysis domains: time, frequency and time-frequency. We showed that a study of the spectrogram (combining time and frequency representation) is much more relevant than a study in the only time or frequency domain.

O presente trabalho tem como objetivo final a verificação da aplicabilidade da Teoria das Opções Reais (TOR) em investimentos de papel e celulose, considerando o Movimento de Reversão à Média (MRM) nos fatores de risco, dado um modelo de gerenciamento de curto prazo, no âmbito de um estudo de caso da Fibria Celulose S.A. para o setor de papel e celulose no Brasil. Nesta dissertação, testa-se a aderência da série histórica de preços da celulose de fibra curta da Fibria, no período entre 2003 e 2013, a um modelo estocástico de reversão à média, sendo este modelo validado para o presente estudo. Uma vez o modelo validado, determinam-se os parâmetros para realização de cálculos e análises fundamentais para se chegar aos objetivos intermediários, etapa preliminar aos resultados do objetivo final. Dentre os cálculos e análises citados, ressaltam-se: determinação dos VPLs dinâmicos e os valores das Opções Reais europeias sequenciais para a Simulação de Monte Carlo com Processo Neutro ao Risco; construção e análise da Árvore Binomial com Processo Neutro ao Risco; construção e análise das Regiões de Gatilho para preços e lucros marginais em um Processo Real; comparação das Regiões de Gatilho com as determinadas pelas Árvores Binomiais. Assim, com tais análises, confirma-se, nesta dissertação, a aplicabilidade da Teoria das Opções Reais na Análise de Investimento no setor celulósico-papeleiro. / The present work has the ultimate purpose of verifying the applicability of the Real Options Theory in the pulp and paper investment, considering the Mean Reversion Movement in the risk factors, given a short-term management model, within a study of Fibria Celulose S.A. for the pulp and paper industry in Brazil. This dissertation tests the adherence of Fibria's short fiber pulp historical price series, between 2003 and 2013 to a stochastic mean reversion model, being this model validated in the present study. Once the model is validated, the parameters for calculations and fundamental analyzes are determined to reach intermediate goals, preliminary step to the results of the final goal. Among the cited calculations and analyzes, it is emphasized: determination of dynamic NPVs and values of the sequential European Real Options for the Monte Carlo Simulation with Risk Neutral Process; construction and analysis of the Binomial Tree with Risk Neutral Process; construction and analysis of the Trigger Regions for prices and marginal profits in a Real Case; Comparison between Trigger Regions and those determined by the Binomial Trees.So with such analyzes, it is confirmed, in this work, the applicability of the Real Option Theory on Investment Analysis in pulp and paper industry. / Dissertação (mestrado) - Pontifícia Universidade Católica. Departamento de Engenharia Industrial, Rio de Janeiro, 2014. / Bibliografia: p. [109]-113.

O setor industrial produtor de papel e celulose tem aumentado sua relevância comercial nas últimas décadas devido à demanda constantemente crescente. O aumento na competitividade do setor gerado pela economia globalizada e a dificuldade de desenvolvimento de bons planos de produção em ambientes produtivos cada vez mais complexos têm motivado a pesquisa por novas e efetivas ferramentas de auxílio à tomada de decisão. Considerando estas dificuldades, abordamos neste trabalho o problema de dimensionamento e sequenciamento de lotes com foco em empresas com processo integrado de produção de celulose e de papel. Trata-se de um problema de planejamento de médio a curto prazo, geralmente com maior enfoque no curto prazo por considerar o planejamento detalhado da produção em horizontes de planejamento que não superam 30 dias. No processo integrado de celulose e papel, foram consideradas as decisões de produção do digestor, evaporador, caldeira de recuperação e de múltiplas máquinas produtoras de papel, além do controle de estoque de produtos intermediários e finais. Modelos matemáticos da literatura foram modificados e estendidos para incorporar características adicionais do problema como, por exemplo, processos com múltiplas máquinas de papel. Além disso, foram desenvolvidas heurísticas construtivas, heurísticas de melhoria, abordagens de solução híbridas baseadas em algoritmos genéticos combinadas com ferramentas comerciais de solução exata, além de combinações entre os métodos. As abordagens desenvolvidas foram testadas computacionalmente e as melhores combinações de métodos foram definidas. De forma geral, os resultados dessas abordagens foram superiores aos obtidos por ferramentas de solução comerciais puras. Ademais, a variação proposta da heurística de melhoria fixe-e-otimize com mudanças na função objetivo se destacou com relação aos demais métodos, obtendo os melhores resultados, independentemente da qualidade da solução inicial utilizada. As principais contribuições desta tese são a apresentação de modelos matemáticos para representar apropriadamente o problema estudado, e o desenvolvimento de métodos de solução efetivos para resolver o problema. / The pulp and paper industry has been increasing the commercial importance in recent decades due to the constant growing demand. The increasing competitiveness of this sector generated by the globalized economy and the difficulty to develop good production plans in complex production environments have motivated the search for new and effective decision support systems. Given these difficulties, in this thesis we address the lot sizing and scheduling problem focused on integrated pulp and paper mills. This is a problem of medium to short term planning, generally more focused on the short term as it covers detailed production schedules in planning horizons which do not exceed 30 days. In these integrated pulp and paper process the production decisions of digester, evaporator, recovery boiler and multiple paper machines are considered, apart from the inventory control of intermediate and final products. Mathematical models known in the literature were modified and extended to incorporate additional features of the problem, such as processes with multiple paper machines. In addition, constructive and improvement heuristics, and hybrid methods based on genetic algorithms combined with a commercial solver were developed, as well as combinations of these solution approaches. The methods developed were computationally tested and the best combinations of methods were defined. Overall, the results of these methods were superior to the solutions obtained by pure commercial solvers. Moreover, the alternative variation proposed of the improvement heuristic fix-and-optimize with exchanges in the objective function surpassed the other methods, obtaining the best results, regardless of the quality of the initial solution used. The main contribution of this thesis are the presentation of mathematical models that appropriately represents the problem under study, and the development of effective solution methods to deal with the problem.

In the pulp- and paper industry the human dimension indesign of information systems has been underestimated andoverlooked. Research indicates that there is a gap concerninguser involvement in the maintenance phase. Therefore, thepurpose of the study is to investigate how user involvementin the maintenance phase affects the user satisfaction, withinthe pulp and paper industry. The study has a deductiveapproach with a qualitative method. A relations model wasdesigned based on the theoretic framework, the modelshows five important factors in user involvement that affectsuser satisfaction; the users opportunity to be involved, the usersinfluence, communication between user and developer, the usersattitude towards the system and organization and managementculture. We interviewed 8 users of the system PaperLine, intwo different work groups and factories. The analysisshowed that the central factor was communication betweenuser and IT-staff, since this was relevant for all the areas of thestudy. The organization and management culture need toactively encourage involvement in the system developmentwork to give the user the opportunity to get involved, this willthen increase the users influence which in turn will lead to theusers positive attitude towards the system. The findingsresulted in a new model called K-OLMII, which shows theeffect user involvement has on user satisfaction in themaintenance phase, through identified factors for the successof user involvement. / Inom massa- och pappersindustrin har den mänskligadimensionen vid design av informationssystem underskattasoch förbisetts. Forskningen indikerar även att det finns ettglapp gällande användarinvolvering i förvaltningsfasen.Därför är studiens syfte att undersöka huranvändarinvolvering i förvaltningsfasen av ett system påverkar användartillfredsställelsen inom massa- ochpappersindustrin. Studien har en deduktiv ansats medkvalitativ metod. Baserat på det teoretiska ramverketutformades en sambandsmodell som visar fem viktigafaktorer inom användarinvolvering, som påverkaranvändartillfredsställelsen; användarens möjlighet attinvolveras, användarens inflytande, kommunikation mellananvändare och utvecklare, användarens inställning till systemetoch organisations- och ledningskultur. Vi har intervjuat 8användare av systemet PaperLine, inom två olikayrkeskategorier och fabriker. Analysen visade att dencentrala faktorn var kommunikation med IT-personal, då dettavar relevant inom samtliga områden av studien.Organisations- och ledningskulturen måste aktivt uppmuntrainvolvering i systemutvecklingsarbetet för att användarenska få en möjlighet att involveras, detta ökar i sin turanvändarens inflytande vilket leder till att användaren får enpositiv inställning till systemet. Fynden resulterade i en nymodell kallad K-OLMII, som visar användarinvolveringenseffekt på användartillfredsställelsen i förvaltningsfasen, viaidentifierade framgångsfaktorer för användarinvolvering.

The topic of this thesis is description, analysis and proposal of turbo generator’s control and protection system. The power output of turbo generators is from 3 MVA up to 75 MVA for various industrial sectors. The final proposal is based on the results of this analysis and it consists of a modern control and protection turbo generators systems. This proposal is designed to respect universality, customer’s requirements. And this proposal should be used in many industry branches.

Nivåerna av växthusgaser i atmosfären har ökat drastiskt de senaste århundradet, till följd av mänsklig aktivitet. Det krävs en stor omställning för oss människor om klimatförändringarna ska motverkas och för att konsekvenserna för planeten inte ska bli allt för stora. Koldioxid är en av de viktigaste växthusgaserna och skogen är en viktig del i balansen av koldioxid i atmosfären genom att växter och träd binder in koldioxid och lagrar biogent kol i biomassan. Rundvirke kan användas för att producera en mängd olika produkter med olika användningsområden och varierande livslängd och det finns både globala och nationella mål som stödjer ett arbete för en minskad klimatpåverkan med skogens resurser som verktyg. Syftet med examensarbetet var att analysera inbindningen av biogent kol i det årliga tillskottet av träbaserade produkter från svensk skogsindustri, för att sedan undersöka potentialen att öka tiden för inbindning av det biogena kolet. FN:s klimatpanel (IPCC) har tagit fram en generell metod för att beräkna lagringen av kol i skördade träprodukter och beräkningarna bygger på tre produktkategorier, vilka är sågade trävaror, spånskivor och papper och kartong. Detta examensarbete har utvidgat FN:s klimatrapportering genom att studera totalt sexton produktkategorier. Flödet av biogent kol studerades genom en materialflödesanalys, som bygger på massbalans mellan ”inputs” och ”outputs” i ett system. Systemet studerades från det att råvara förbrukas till dess att produkterna går som avfall och förbränns. Statistik över råvaruförbrukning inom sågverksindustrin och massaindustrin, samt produktionsmängd av fibermassa och träbaserade produkter användes i analysen. En stor volym biomassa går dessutom direkt till förbränning och ger bioenergi. Resultatet visade att sågade trävaror från sågverksindustrin har längst medellivslängd och binder även in störst mängd biogent kol. Biobränslen har kortast medellivslängd, och koldioxid frigörs till atmosfären på mycket kortast tid. Enligt detta examensarbete innehåller träbaserade produkter från Sverige 29,0 miljoner ton koldioxid årligen. Tre strategier att förlänga inbindningstiden av biogent kol studerades, vilka är förlängd livslängd för produkter, kaskadanvändning och Bio-Energy with Carbon Capture and Storage (BECCS). Att förlänga livslängden för produkter innebär att återvinning av exempelvis cellulosabaserade textilier införs. Kaskadanvändning innebär att skogsindustrin primärt ska producera långlivade produkter och undvika att biomassa direkt går till förbränning. BECCS bygger på att träden binder in kol i sin biomassa och när en träbaserad produkt förbränns pressas frigjord koldioxid ned i marken och lagras. BECCS bedöms vara den strategi som är mest avancerad. / The levels of greenhouse gases have increased drastically over the past hundred years as a result of human activity. Major actions are needed to counter climate change, if the consequences are not to be too great. Carbon dioxide is one of the most important greenhouse gases and the forest is an important part of the balance of carbon dioxide in the atmosphere, by the fact that plants and trees bind carbon dioxide and store biogenic carbon in the biomass. Roundwood can be used to produce a variety of products with different applications and varying life spans and there are both global and national goals that support a work to reduce climate change with forest resources as tools. The aim of the thesis was to analyse the storage of biogenic carbon in the annual addition of wood-based products from the Swedish forest industry, and then to investigate the potential to increase the time of storage. The UN Climate Panel (IPCC) has developed a general method for calculating the storage of carbon in harvested wood products and the calculations is based on three product categories, which are sawn wood, wood-based panels and paper and paperboard. This thesis has expanded the UN climate reporting by studying a total of sixteen product categories. The flow of carbon was studied using a material flow analysis, which is based on the mass balance of inputs and outputs in a system. The system was studied from the raw material being consumed until the products are defined as waste and incinerated. The calculations were based on statistics on raw material consumption in the sawmill industry and the pulp and paper industry, as well as production volume of fibre pulp and wood-based products. A large volume of biomass also goes directly to incineration and provides bioenergy. The binding time of biogenic carbon was analysed to explore the potential of increasing the binding time, using different strategies. Sawn timber products from the sawmill industry have the longest average life span and also bind the highest amount of biogenic carbon. Biofuels have the shortest average life span, which means that carbon dioxide is released into the atmosphere rapidly. A total of 29.0 million tonnes of carbon dioxide are stored in wood-based products annually, according to this study. Three strategies to extend the storage time of biogenic carbon were studied in this study, which were extended life span of the products, cascading wood use and so called BECCS. To extend product life means introducing recycling of, for example, cellulose-based textiles. Cascading wood use means that the forest industry primarily produce long-lived products and avoid biomass going directly to incineration. BECCS is based on the fact that trees bind carbon dioxide in their biomass and when wood-based product is incinerated, the carbon dioxide is stored in the ground. BECCS is considered to be the most advanced strategy, of the three.

Over the past few years, there has been a surge in literature regarding the digital transformation. Its popularity derives from the tremendous potential it has proven in production companies, in previous studies. This has increased its attention among actors within the industrial business area. Despite this overwhelming popularity, the literature does not address the research area in relation to the slow-moving pulp and paper industry. At the same time, incumbent companies within the industry have proven to be incapable of adopting the digital transformation in the rapid pace of today’s volatile environment. This research therefore intends to investigate the crucial factors an incumbent company within the pulp and paper industry needs to adopt to achieve a higher absorption of novel digital trends.  In order to investigate the subject, a qualitative case study was applied to a company within the category. The material was retrieved through semi-structured interviews with relevant actors within the case company and analyzed through thematic analysis. This revealed nine clearly outlined themes of insufficient corporate infrastructure that emphasizes essential organizational capabilities. These findings suggest that there are a number of capabilities that leaders and decision-makers need to adopt in order for the organization to conduct a more efficient and sustainable approach of digital transformation. This research therefore proposes a framework with outlined leadership capabilities to consider in transformation initiatives, within the pulp and paper industry. The framework will help leaders in shaping the process of implementing and maintaining digital transformation. These capabilities stimulate the support activities, which are the surrounding procedures and activities that support the organization in transformation initiatives, and are imperative for an organization to possess within the given context. By reducing the ambiguity and resistance to change the framework will help leaders in improving the decision making of transformation initiatives. The ultimate goal is to establish a unified organizational vision, based on digital transformation, to strengthen the overall long-term sustainability. / Tidigare studier påvisar att digital transformation blivit ett allt vanligare forskningsområde. Detta på grund av de positiva effekter transformationen medfört inom ett flertal produktionsföretag. Konceptet har ökat uppmärksamheten inom industrisektorn, där det nu blivit allt vanligare att anamma digital transformation. Trots denna trend uppvisar befintlig litteratur en avsaknad av studier inom forskningsområdet, i relation till den långsamt rörliga kartong- och massaindustrin. Samtidigt påvisar etablerade företag inom industrin en brist på förmågan att anpassa sig till den digitala transformationen. Denna forskningsstudie syftar därför till att undersöka vilka faktorer som kan vara avgörande för ett företag inom kartong- och massaindustrin att anamma i strävan att uppnå en högre absorption av nya digitala trender. För att undersöka ämnet genomfördes en kvalitativ fallstudie hos ett företag inom kartong- och massaindustrin. Materialet erhölls via semistrukturerade intervjuer med relevanta aktörer inom fallföretaget och analyserades med hjälp av tematisk analys, vilket visade på nio tydliga teman i form av bristande infrastruktur. Detta resultat tyder på att ledare och beslutsfattare behöver besitta ett visst antal kvalifikationer för att organisationen ska kunna uppnå en mer effektiv och hållbar digital transformation. Denna studie har därför upprättat ett tydligt ramverk med definierade kvalifikationer som ledare bör eftersträva vid digital transformation inom kartong- och massaindustrin. Ramverket är avsett att användas som stöd för ledare vid implementering och upprätthållande av transformativa initiativ. Genom att stimulera viktiga stödfunktioner med hjälp av dessa kvalifikationer kan den organisatoriska tvetydigheten och acceptansen för sådana initiativ öka. Det ultimata målet är att etablera en enhetlig organisatorisk vision, baserat på digital transformation, för att stärka den övergripande långsiktiga hållbarheten.

En förväntad ökning av jordens befolkning ställer den redan ökande fiberkonsumtionen på sin spets. Bomull är en av de mest frekvent använda textilfibrerna men dess vatten- och kemikalieanvändning i framställningsprocessen har lett till förödande konsekvenser för människa och miljö. Flera alternativa, hållbara fibrer behöver därmed introduceras på marknaden. Garn av papper från råvaran abacá har länge använts till textila ändamål till följd av dess goda mekaniska egenskaper. På senare år har intresset för fibern ökat främst på grund av dess miljömässiga fördelar i jämförelse med bomull. Garn av papper är dock styvt och känns strävt mot huden. För att vidga pappersgarnets användningsområden måste därför dess taktila egenskaper förbättras genom någon typ av behandling. Textilproduktion är kemikaliekrävande och flertalet av kemikalierna som används är miljö- och hälsofarliga. Det är därför av intresse att hitta en mekanisk metod för mjukgöring snarare än en kemisk. En sådan mjukgöring har därav utvecklats och undersökts inom projektets ramar. Mjukgöringen är en smärglingsbehandling i garnform där garnet leds genom en bladspännare utrustad med två sandpapper som smärgeldukar. Behandlingen ämnar öka antalet utstickande fiberändar och på så vis efterlikna känslan av ett stapelfibergarn. Genom att garnet behandlas redan i garnstadiet kan det sedan användas till valfri textil konstruktionsteknik. För att undersöka effekten av smärglingsbehandlingen har studien delats in i två delar. Den ena delen undersöker två klassiska denimvävar av 100 % papper där väftgarnet i den ena väven har smärglats en gång medan väftgarnet i den andra är obehandlat. Kawabata Evaluation System (KES) har använts för att objektivt analysera vävarnas taktila egenskaper, alltså hur de känns vid beröring. För att undersöka hur vävens ytstruktur förändrats till följd av behandlingen har provkropparna fotograferats i svepelektronmikroskop (SEM) och ljusmikroskop. Studiens andra del undersöker effekten av upprepade smärglingsbehandlingar på garn. Pappersgarner som behandlats mellan noll och fem gånger undersöks dels gällande dess mekaniska egenskaper men även visuellt i SEM och med hjälp av ljusmikroskop. Behandlingen förväntas minska garnets styrka. För att kontrollera om de behandlade garnerna är tillräckligt starka för att användas i en industriell vävprocess trots den mekaniska degraderingen jämfördes deras styrka med ett referensgarn av bomull. Majoriteten av resultaten från KES-testerna visar på att det inte är någon skillnad mellan en obehandlad väv och en väv vars väftgarn är smärglat en gång. Den behandlade väven är dock lättare att komprimera och har en större initial tjocklek än den obehandlade väven. Detta tyder på att smärglingen kan ha ändrat garnernas diameter vilket resulterat i högre invävning och därmed ökad vikt och tjocklek. Den visuella undersökningen av garnerna i ljusmikroskop pekar mot ett ökat antal utstickande fiberändar i takt med ökat antal behandlingar. Dock är skillnaden mellan det osmärglade garnet och det garn som enbart smärglats en gång liten. Dragprovning av garn visar att det pappersgarn som smärglats fem gånger har signifikant lägre brottkraft än de övriga pappersgarnerna men är starkare än referensgarnet i bomull. Detta styrker förväntningen om att smärgling försämrar styrkan på garnet men visar också att de behandlade garnerna, trots den minskade styrkan, bör vara tillräckligt starka för att användas som väftgarn i maskinell vävning. Fiberändarnas effekt i en denimväv behöver undersökas vidare för att en slutsats kring hur de påverkar den taktila komforten ska kunna dras. Metoden för garnsmärgling är i sin initiala fas och flera parametrar behöver undersökas närmare innan metoden skulle kunna implementeras på industriell skala som en metod för mjukgöring av pappersgarn med syfte att främja den framtida fibermångfalden. / An expected population increase and rising consumption of textile fibres creates a demand for both new materials and processes. Cotton is one of the most frequently used fibres but its use is resource intensive both in terms of water and chemical agents. To meet these demands a range of alternative, sustainable fibres need to be developed and introduced into the market. Due to its good mechanical properties paper yarns produced from the abacá plant have long been used in textile applications. In recent years it has also garnered increased interest as a result of its environmental benefits in comparison to cotton. However, paper yarns tend to be stiff and feel coarse in contact with skin. In order for paper yarns to have larger fields of use its tactile qualities must therefore be improved. The production of textiles is generally reliant on the use of chemicals that in varying degree pose threats both to human health and the environment as a whole. It would therefore be beneficial to develop a method for the softening of paper yarns that is based on a mechanical approach, rather than a chemical one. In this project a mechanical method of softening paper yarns has been developed and tested. The softening process is an altered approach to conventional emery grinding and is performed on yarn rather than fabric. The yarn is guided through a leaf tensioner fitted with two sand papers with the purpose to increase the number of protruding fibre ends, thereby reproducing the feel of staple fibre yarns. In order to investigate the effects of the emery grinding two classical denim weaves were produced from 100 % paper yarn. The weft yarn in one of the weaves was emery ground once while the other was left untreated. Kawabata Evaluation System (KES) was used to objectively analyze the tactile qualities of the differently treated weaves. In addition to KES-tests Scanning Electron Microscopy and light microscopy was utilized for a visual analysis. Since it would also be of interest to study the effects of repeated treatments, yarn treated up to five times was inspected both visually and mechanically. The emery grinding process is expected to decrease the strength of the yarn. To check whether the emery ground yarns were strong enough to be used in an industrial weaving process, its strength was compared to a cotton yarn previously used as a weft yarn in a denim weave. Results from KES show no significant changes concerning the majority of parameters tested on the weaves. The treated weave is however easier to compress and presents an increase in initial thickness when compared to the untreated one. This indicates that the emery grinding may have altered the yarns diameter resulting in a higher crimp in the weave causing an increase in the weight and thickness of the fabric. The visual inspection of the yarns using a digital microscope point to an increase in protruding fibre ends as the number of treatments increase. The difference between untreated paper yarn and yarn that had been emery ground once was however small. The tensile test shows that yarn that had been treated five times had a significantly lower tensile strength compared to the other paper yarns but was still stronger than the cotton yarn. This indicates that emery grinding does indeed decrease the tensile strength of the paper yarn, but that it still should be strong enough to be used in industrial weaving. Paper yarn treated more than once would have to be studied further in order to come to a conclusion about their impact on the tactile comfort of the weave. The method of emery grinding is in its initial phase and a number of parameters can be assumed to have an effect on the results of the process. In the interest of creating more diversity in textile fibres the effects of these parameters would all have to be explored before this method can be implemented on an industrial scale for the softening of paper yarns.

This doctoral thesis consists of three essays. In the first essay I investigate the presence of productivity convergence in eight regional pulp and paper industries of U.S. and Canada over the period of 1971-2005. Expectation of productivity convergence in the pulp and paper industries of Canadian provinces and of the states of its southern neighbour is high since they are trading partners with fairly high level of exchanges in both pulp and paper products. Moreover, they share a common production technology that changed very little over the last century. I supplement the North-American regional data with national data for two Nordic countries, Finland and Sweden, which provides a scope to compare the productivity performances of four leading players in global pulp and paper industry. I find evidence in favour of the catch-up hypothesis among the regional pulp and paper industries of U.S. and Canada in my sample. The growth performance is at the advantage of Canadian provinces relative to their U.S. counterparts. However, it is not good enough to surpass the growth rates of this industry in the two Nordic countries. It is well-known that econometric productivity estimation using flexible functional forms often encounter violations of curvature conditions. However, the productivity literature does not provide any guidance on the selection of appropriate functional forms once they satisfy the theoretical regularity conditions. The second chapter of my thesis provides an empirical evidence that imposing local curvature conditions on the flexible functional forms affect total factor productivity (TFP) estimates in addition to the elasticity estimates. Moreover, I use this as a criterion for evaluating the performances of three widely used locally flexible cost functional forms - the translog (TL), the Generalized Leontief (GL), and the Normalized Quadratic (NQ) - in providing TFP estimates. Results suggest that the NQ model performs better than the other two functional forms in providing TFP estimates. The third essay capitalizes on newly available high frequency energy consumption data from commercial buildings in the District of Columbia (DC) to provide novel insights on the realized energy use impacts of energy efficiency standards in commercial buildings. Combining these data with hourly weather data and information on tenancy contract structure I evaluate the impacts of energy standards, contractual structure of utility bill payments, and energy star labeling on account level electricity consumption. Using this unique panel dataset, the analysis takes advantage of detailed building-level characteristics and the heterogeneity in the building age distribution, resulting in buildings constructed before and after mandatory energy standards came into effect. Estimation results suggest that in commercial buildings constructed under a code, electricity consumption is lower by about 0.48 kWh per cooling degree hour. When tenants pay for their own utilities, consumption is lower by 0.82 kWh per cooling degree hour. The Energy Star effect is a 0.31 kWh reduction per cooling degree hour. Finally, peak savings for all three variables of interest occur at 2pm in the summer months, whereas peak summer marginal prices at DC's local electric utility occur at 5pm.