I Sverige står bostadssektorn för mer än en tredjedel av landets energianvändning. Byggnader måste minska sin energianvändning för att således kunna uppfylla framtida lagkrav om maximal tillåten energianvändning, men också för att minska påverkan till global uppvärmning. Ytterligare en problematik som råder, däribland i Sverige, är bostadsbrist. Kommunala bostadsbolag står inför utmaningen att kunna bygga bostäder snabbt, billigt och miljövänligt för att minska bostadsbristen i landet. Ett sätt att studera två av tre hållbarhetsaspekter vid val av framtida bostadsbyggande är att utföra en livscykelanalys (LCA) och livscykelkostnadsanalys (LCC) kring de tilltänkta husen. LCA:er indikerar vilken miljöpåverkan en produkt förorsakar under dess livslängd. LCC:er avser att studera vilka kostnader produkter ger upphov till under en given analysperiod. Det svenska kommunala bostadsbolaget Stångåstaden AB står inför utmaningen kring bostadsbrist och vill bygga hållbara bostäder. Bostadsbolaget har önskat en jämförande LCA och LCC av två verkliga flerbostadshus som de genom ramavtal kan upphandla, detta är utgångspunkten för denna studie. Den ena byggnaden har stomme av betong, den andra har stomme av trä. Husen är tänkta att placeras i utkanten av Linköping, Sverige. Studien har valt att analysera miljöpåverkan från husens olika livscykelfaser samt kostnader över analysperioden 50 år. Utöver detta studeras även vilka energieffektiviseringsåtgärder (EEÅ) till byggnaderna som är optimala att genomföra för att öka den termiska prestandan hos huskonstruktionerna. Från litteraturen finns det relativt få studier som kombinerar både LCA och LCC för vanligt förekommande hustyper i städer. I dess standardfall påvisade resultatet från LCA:n att huset med betongkonstruktion hade något lägre påverkan i sex av sju studerade miljöpåverkanskategorier, jämfört med flerbostadshuset i trä. Resultatet skilde sig lite åt då annan typ av indata användes. Vad gäller kostnader under husens livslängd var huset i trä ungefär 20 % dyrare jämfört med huset med betongkonstruktion. Trots annan typ av indata var träkonstruktionen dyrare än betongkonstruktionen. Med en kalkylränta på 7,5 % var det inte lönsamt att genomföra EEÅ för husen, med halverad kalkylränta blev det dock lönsamt att tilläggsisolera krypgrunden i huset med trästomme. Fler studier behöver utföras för att generalla slutsatser ska kunna dras kring vilket konstruktionsmaterial som är mest hållbart. Denna studie baseras på två specifika fall. Samma resultat kan eventuellt inte förväntas för andra byggnader med stomme i betong och trä. / The residential sector accounts for more than a third of the energy use in Sweden. To reduce the energy use of buildings is a necessity in order to meet future regulationof maximum allowable energy, but also important to reduce the impact on global warming. Another complexity arising in Sweden is the shortage of accommodation. Municipal housing corporations face the challenge of constructing residences fast, cheap and with concern of environmental effects in order to reduce the shortage of accommodation. One way of assessing two of the three aspects of sustainability when looking at future construction of residential buildings is to carry out a Life Cycle Assessment (LCA) and a Life Cycle Cost Assessment (LCCA). An LCA can indicate what kind of environmental impact a product causes over its lifetime and the LCC allows for assessing what types of costs are associated with the product. For the municipal housing corporation Stångåstaden AB the shortage of accommodation is a reality and their mindset is sustainable construction of residences. This study was conducted upon request from Stångåstaden who wanted a comparative LCA and LCCA between two prefabricated multi-residential buildings that are available to them through a framework agreement. The first building has a concrete foundation and the second one is made of wood. The houses are planned to be placed at the outskirts of Linköping, Sweden. The focus of this study has been to comparatively assess the environmental impact from the different life cycle phases and the economic costs of the two buildings during a time period of 50 years. Moreover, the thesis also analyze the optimal retrofit strategy for the buildings in order to find the optimal (lowest) life cycle cost. Furthermore, the current literature has conveyed relatively few studies that combine both LCA and LCC methodology for house types that are common in most towns. The result from the LCA indicated that the house with concrete construction had a little less impact in six of the seven studied environmental impact categories compared to the house made of wood. The result differed slightly when the input data were changed. Regarding the LCCA the house made of wood was roughly 20 % more expensive than its concrete counterpart. Changing the input data revealed no difference in the result. With an interest rate of 7,5 % no retrofits were profitable for either building, however reducing the interest rate to half its original value made it cost optimal to increase the floor insulation for the house made of wood. More studies should be conducted to be able to draw general conclusions regarding which construction material that is the most sustainable. This thesis is based on two specific and real cases. The same result could possibly not be expected from other studies comparing buildings with concrete and wood construction.

Les différents types d’édifices résidentiels, urbains, suburbains et ruraux de l'époque de la Rome antique sur le territoire de la Serbie contemporaine, ainsi que la culture de l’habitat, représentent le sujet abordé dans la présente thèse. Cette réflexion analyse les principaux facteurs économiques, démographiques, sociologiques, géographiques, culturels et autres qui ont influencé le choix de l’emplacement des résidences, le développement de différents types d’agglomérations, la conception architecturale des édifices résidentiels et la création d’une culture de l’habitat. Les points primordiaux de cette recherche sont : l'analyse des zones résidentielles au sein des unités urbaines, les liens des propriétés suburbaines et rurales avec les centres urbains et le réseau de l'infrastructure de l'Antiquité tardive, ainsi que l'analyse comparative des éléments structuraux et décoratifs des maisons romaines du point de vue des matériaux utilisés, des techniques, de la décoration etc. Les éléments architecturaux et les caractéristiques fonctionnelles des maisons de l’Antiquité tardive sur le sol serbe sont comparés aux édifices construits dans les autres parties de l'Empire romain, afin d'identifier leurs valeurs spécifiques et les influences architecturales dominantes. La thèse représente une base de données bilingue accessible aux nouvelles générations de chercheurs, une contribution à l'ensemble des valeurs culturelles de la Serbie. Le but de cette base de données est d'élaborer une stratégie pour la conservation, la présentation et l'utilisation du patrimoine antique en tant que grand potentiel culturel, touristique et économique de développement durable. / The research topic of this thesis refers to residential buildings and residence culture in late Ancient Rome Classical antiquity period on the territory of the present-day Republic of Serbia. Research goal is to reconstruct residential architecture and culture from the Ancient Roman period on this territory, based upon analyses of preserved residential architecture structures, identification of architectural elements’ characteristics, creation of residential buildings typology, as well as analyses of residential urban zones, links between buildings and urban centers and infrastructure network. Through comparative analysis of spatial structure, functional, constructional and decorative elements, as well as characteristics of late Roman antiquity buildings on the territory of Serbia with residential buildings from other territories of Roman Empire, their specific values and dominant influences have been identified.Systematized data on residential buildings and reconstruction of residential culture on this territory allows further valorization of findings in comparison to other areas of Roman Empire. It also explains different types of late Antiquity residential buildings occurrence and their influence on later development of architectural forms. Collected and processed information, along with recommendations for preserving the fund of antique residence program as architectural heritage, has been transformed into bilingual database available to new generations of researches worldwide. / Предмет истраживања у докторској дисертацији су стамбени објекти и култура становања из периода касне антике на територији данашње Србије. Циљ истраживања је реконструкција стамбене архитектуре и културе становања у римском периоду на овом подручју, на основу проучавања сачуваних резиденцијалних структура, утврђивања карактеристика архитектонских елемената и формирања типологије стамбених објеката, као и анализе зона становања унутар градова, веза грађевина са урбаним центрима и са мрежом инфраструктуре. Упоредном анализом просторне структуре, функционалних, конструктивних и декоративних елемената, као и карактеристика касноантичких грађевина са територије Србије са стамбеним зградама из других области Римског царства, утврђене су њихове специфичне вредности и доминантни утицаји.Систематизовани подаци о стамбеним грађевинама и реконструкција стамбене културе на овом подручју омогућавају валоризацију налаза у односу на друга подручја Римске империје, као и боље разумевање настанка различитих типова касноантичких стамбених објеката и њиховог значаја за даљи развој архитектонских форми. Прикупљене и обрађене информације су, уз препоруке за очување фонда стамбеног програма антике као градитељске баштине, преточене у двојезичну базу података међународно доступну новим генерацијама истраживача.

Gröna byggnader hjälper till att driva den hållbara utvecklingen framåt, vilket behövs inom fastighetsbranschen på grund av dess stora miljöpåverkan. Den fortsatta utvecklingen kännetecknas av problem såsom bristande medvetenhet samt en osäkerhet kring det ekonomiska utfallet. Resultaten som framförs i denna studie bidrar till en ökad förståelse av hur medvetna fastighetsföretag är om gröna bostadsbyggnader samt hur de uppfattar de ekonomiska följderna. Studiens syfte är att belysa hur fastighetsföretag uppfattar de ekonomiskt positiva faktorerna (hyra, vakans, drift- och underhåll, image, inomhusmiljö och risk) som sammankopplas med gröna byggnader. Enbart en del av problemområdet berörs, varvid fokus är på de positiva faktorer som frekvent förekommit i tidigare studier på ämnesområdet. För att besvara syftet har en kvalitativ metod med ett deduktivt ansats valts. Sex fastighetsföretag med varierande miljöengagemang har intervjuats, där samtliga är verksamma i södra Värmland. Intervjufrågorna har baserats på identiskt material för att sedan delvis anpassas efter respektive fastighetsföretag. Resultatet av intervjuerna framkommer i studiens empiriska sammanställning samt analyseras utgående från den teoretiska referensramen. Både likheter och skillnader har observerats. Slutsatsen är att samtliga av de intervjuade fastighetsföretagen värdesätter någon av faktorerna, samt vidrör att ett långsiktigt förhållningssätt är viktigt. Det har framkommit att minskade drifts- och underhållskostnader samt en förbättrad image är de faktorerna som värdesätts högst. Den faktor som företagen anser har minst samband med gröna byggnader är minskad vakans, vilket kan bero på den rådande bostadsbristen. / Green buildings help to drive the sustainable development forward, which is needed in the real estate industry due to its major environmental impact. The continued development is characterized by problems such as a lack of awareness and an uncertainty about the economic outcome. The results presented in this study contributes to an increased understanding of how aware real estate companies are, and how they perceive green residential buildings financial impact. The purpose of this study is to illustrate how real estate companies perceive the economically positive factors (rent, vacancy, operating- and maintenance costs, image, indoor environment and risk) which are linked to green buildings. Only a part of the problem area is examined, whereas focus is going to be on the positive factors which frequently appear in previous studies on the subject area. A qualitative method with an deductive approach has been chosen for this essay in order to answer the purpose of the study. Interviews have been conducted with six real estate companies located in Southern Värmland, whom had varied environmental commitment. The questions that was used have been based on identical material and then been partly adapted after each company. The results from the interviews are stated in the empirical compilation and are being analysed in connection to the theoretical framework. Both similarities and differences have been observed. The concludes are that all of the interviewed real estate companies appreciate some of the factors. All of them mention that a long term approach is of relevance despite their varied startup presumption. It has emerged that the reduced operation- and maintenance cost and an improved image are the most appreciated factors. The factor that the real estate companies consider to have least correlance with green buildings is reduced vacancy, which can be due to the current lack of housing.

Die Entwicklung Sachsens im 19. Jh. - Die Geschichte der ersten beiden sächsischen Baugenossenschaften: (1.) in Mittweida und (2.) in Meißen – Die Pioniere des deutschen Genossenschaftswesens: Victor Aimè Huber und Schulze-Delitzsch. - (1.) Die Entwicklung der Industrie in Mittweida und 1873 die Gründung des Bauvereins zu Mittweida - Die drei Wohnbauten des Bauvereins mit Lageplan und alten Bauzeichnungen sowie kritische Untersuchung der Wohnungsgrundrisse. - (2.) Die Entwicklung Meißens zu einer Industriestadt des 19. Jahrhunderts und die Bedeutung ihrer keramischen Industrie. - Zur Gründung des Meißner Bauvereins Jahre 1873 und seiner Baugeschichte. - Die drei genossenschaftlichen Wohnbauten mit Lageplan und alten Bauzeichnungen. Kritische Betrachtung der Wohnungsgrundrisse unter Berücksichtigung des Einbaus von Kachelöfen aus Meißener Produktion. - (3.) Ein Epilog: Das Heizen der Wohnung im 19. Jh. - Verbesserung der Heiz- und Kochtechnik durch den Einsatz von Kachelöfen - Die Kachelproduktion in Meißen und in Velten/Mark. - Zur Gewinnung von Rohbraunkohle und der Brikettierung - Das Braunkohlenbrikett. - Fotografien gusseiserner Öfen und Kachelöfen aus Meißen und Velten/Mark im 19.Jh. Insgesamt 51 Seiten mit 33 Abbildungen.

Der Klimawandel ist auf regionaler Ebene nachweisbar. Zudem gehen Forschungsergebnisse davon aus, dass sich Ereignisse wie Überflutung und Starkregen regional differenziert zukünftig noch intensivieren werden. Bereits heute belegen Schadensmeldungen in der Region Dresden einen sich aus den klimatischen Veränderungen ergebenden Handlungsbedarf in Form von Anpassungsmaßnahmen auf Gebäudeebene. Deshalb sind die Hauptziele der vorliegenden Arbeit das Aufzeigen der Verletzbarkeit von Wohngebäuden und die Erarbeitung von Vorschlägen für entsprechende Ertüchtigungen. Als Datenbasis dient zum einen die baukonstruktive Analyse typischer Beispielgebäude der Region Dresden, welche gleichzeitig die wichtigsten Baualtersstufen abbilden. Dadurch können die in der Region hauptsächlich anzutreffenden baukonstruktiven Durchformungen, Nutzungen und Charakteristiken von Wohngebäuden abgedeckt werden. Dies dient als Grundlage zur Beurteilung der Verletzbarkeit und Anpassungsfähigkeit der wichtigsten Baukonstruktionen gegenüber den Einwirkungen Überflutung und Starkregen. Zum anderen dient als Datenbasis die Dokumentation, Analyse und Interpretation abgelaufener Schadensereignisse in Bezug auf Schadensbilder und Schadensmechanismen an Gebäuden und Baukonstruktionen. Innerhalb der Verletzbarkeitsanalyse gegenüber Überflutung führt die Beschreibung von Schadenstypen, Schadensbildern und Schadensmechanismen in die Erläuterung einer Methodik zur Abschätzung von Hochwasserschäden an Gebäuden. Diese wird in der Arbeit dazu verwendet, die spezifische Verletzbarkeit der einzelnen Beispielgebäude gegenüber der Einwirkung Überflutung mit Hilfe von Wasserstand-Schaden-Beziehungen zu ermitteln. Darauf aufbauend können nun Bereiche, welche aufgrund ihrer hohen Verletzbarkeit angepasst werden sollten, eingegrenzt werden. In der Folge werden beispielhaft bautechnisch mögliche Anpassungsmaßnahmen vorgestellt, am baukonstruktiven Detail gezeigt und ihre positiven Auswirkungen auf die Wasserstand-Schaden-Beziehungen beziehungsweise auf die Verringerung der Verletzbarkeit der Beispielgebäude dargestellt.

Energianvändningen idag är den största bidragande faktorn till de globala klimatförändringarna vilket ställer krav på mer hållbar och resurseffektiv energihantering. I Sverige står sektorn bostäder och service för ca 40 % av den slutgiltiga energianvändningen motsvarande 144 TWh. För att nå en mer hållbar byggnadssektor har EU i direktivet för Byggnaders Energiprestanda satt målet att byggnadssektorn ska vara fossilfri till 2050, samt beslutat att varje medlemsstat ska etablera en långsiktig renoveringsstrategi. Nationellt finns därmed målet att minska den totala energianvändningen per uppvärmd area med 50 % till 2050 jämfört med 1995. Detta innebär att omfattande energieffektiviseringsåtgärder (EEÅ) behöver implementeras i Sveriges byggnadsbestånd. I examensarbetet jämförs den nationella potentialen avseende energibesparing, kostnadseffektivitet samt utsläppsreduktion av koldioxidekvivalenter (CO2eq) för olika energieffektiviseringsåtgärder (EEÅ) kopplade till uppvärmning och tappvarmvattenanvändning i flerbostadshus. Vidare undersöks även hur väl anpassade befintliga styrmedel är för de studerade EEÅ. För att besvara frågeställningarna har sex olika typhus tagits fram vilka är representativa för Sveriges bestånd av flerbostadshus. Dessa byggnader har modellerats i programvaran IDA ICE och energisimuleringar har genomförts för att undersöka effekterna av samtliga EEÅ. Vidare, styrmedel kopplade till energieffektivisering av flerbostadshus har analyserats och dess innebörd för olika EEÅ granskats. Resultatet visar att inom det svenska flerbostadshusbeståndet har installation av spillvattenvärmeåtervinning och FTX störst tekniskt möjlig energibesparingspotential med en årlig nationell energibesparingspotential på 5,3 TWh respektive 4,7 TWh. Isolering av tak är den EEÅ med högst kostnadseffektivitet per sparad energienhet, 334–579 SEK/MWh beroende på klimatzon, följt av spillvattenvärmeåtervinning och FTX som har en kostnadseffektivitet på 1267–1503 SEK/MWh respektive 1882–3587 SEK/MWh. Takisolering är även den EEÅ som är mest kostnadseffektiv för utsläppsminskning av koldioxidekvivalenter följt av spillvattenvärmeåtervinning och FTX. För takisolering är kostnadseffektiviteten 5,9–10,3 tSEK/ton CO2eq, 28,2–33,5 tSEK/ton CO2eq för spillvattenvärmeåtervinning och 39,5–93 tSEK/ton CO2eq för installation av FTX. Utifrån de styrmedel som studerats konstateras det att befintliga styrmedel för energieffektivisering i flerbostadshus inkluderar konventionella EEÅ men att det finns bristfällig information och krav gällande återvinning av värme från spillvatten trots åtgärdens höga energibesparingspotential och kostnadseffektivitet. Bättre kunskap och information gällande kostnadseffektiviteten för olika EEÅ kan leda till mer resurseffektiva åtgärdsförslag från energiexperter och även öka renoveringstakten. / Today's energy use is the largest contributing factor to global climate change, which calls for a more sustainable and resource-efficient energy management. In Sweden, the residential and service sector accounts for about 40% of the final energy use, corresponding to 144 TWh. To achieve a more sustainable building sector, the European Commission has set a target in the Energy Efficiency Directive that the building sector should be fossil-free by 2050 and decided that every Member State should establish a long-term renovation strategy. Nationally, there is a target to reduce the total energy use per heated area by 50% by 2050. This requires a large-scale implementation of energy efficiency measures (EEMs) in Sweden's building stock. This master thesis compares the national potential regarding energy saving, cost-effectiveness and emission reduction of carbon dioxide equivalents (CO2eq) for various EEMs linked to heating and domestic hot water use in multi-family buildings. Furthermore, it is also examined how well-adjusted existing policy instruments are to the studied EEMs. To answer the research questions, six different reference buildings, which are representative of Sweden’s stock of multi-family buildings, have been developed. These buildings have been modeled using the software IDA ICE and energy simulations have been carried out to investigate the effects for all EEMs. Policy instruments regarding energy efficiency in multi-family buildings have been analyzed and their significance for various EEMs have been investigated. The results show that installation of wastewater heat recovery and exhaust air heat recovery has the highest technically possible energy saving potential with an annual national saving potential of 5.3 TWh and 4.7 TWh, respectively Roof insulation is the EEM with the highest cost-effectiveness per saved energy unit, 334–579 SEK/MWh depending on climate zone, followed by wastewater heat recovery with a cost-effectiveness of 1267–1503 SEK/MWh and exhaust air heat recovery with 1882–3587 SEK/MWh. Roof insulation is also the EEM that is most cost-effective regarding reduced CO2eq -emissions, followed by wastewater heat recovery and exhaust air heat recovery. For roof insulation, the cost-effectiveness is 5.9–10.3 kSEK/ton CO2eq, 28.2–33.5 kSEK/ton CO2eq for wastewater heat recovery and 39.5–93 kSEK/ton CO2eq for installation of exhaust air heat recovery. Based on the studied policy instruments, it is found that the existing policy instruments for EMMs in multi-family buildings include conventional EMMS. However, there is insufficient information and requirements regarding recovery of heat from wastewater despite the measure's high energy saving potential and cost-effectiveness. Better knowledge and information regarding the cost-effectiveness of various EEMs can lead to more resource-efficient suggestions from energy experts and increase the pace of renovation.

Human efforts to increase their comfort rise in density of population in congested city areas, rapid growth of traffic and electric smog created due to constantly transforming communication technologies all resulted in an increase of stress in the immediate human environment. All of this, along with frequent reports about changes in global climate, gradually contributes to an alteration of thinking of the whole society, which is forced to face the consequences of economic damages caused by climatic changes. If we want to tenably assert adequate economic and social living conditions, we have to approach the natural environment in a more profound way. In accordance with the trend of substantional development for the purpose of enhancement of the quality of the living environment in the field of building industry, it is logical to concentrate on buildings, which are conceptually focused on saving of the energy. That is on energy-efficient houses. Pathway to sustainable building is not based on discovering one or several multipurpose technological solutions, but on usage of new designing principles, new materials and methods of processing them as well as new techniques of construction. For an effective creation of a building concept it is essential to have that kind of device which quickly responds to changes performed on a design, enables an easier work on variants and produces the most accurate results. Consistent application of energy optimizing methods is necessary particularly for designs of energy saving houses. Beginning efficient building design is the most “abstract factor of concept linked with very uncertain inputs,” because a lot of parameters in that moment is still unknown. Many mutually connected factors are invoked during designing passive house e.g. trajectory of the sun and the shielding effect of the surroundings, the aspect of sunlight and interior lighting, power quality construction, etc. Currently, the architect has no choice, he can use only well-known precepts, such as large windows are facing the South not the North. Unfortunately this "empirical formula" for the design of a real passive house is not enough. And yet the first draft of the house is most affected by not only its shape, form, but user´s comfortable, cost, feasibility and future energy behavior of buildings and related operating costs of the house too. It is obvious that this stage should not be underestimated, because “minor variation of the initial inputs greatly influence the outcomes.” With this reasoning, the work focuses on early stage design decision, i.e. the architectural concept of a passive house (an idea, vision). Therefore the aim of this work is to simplify the issue into understandable form, i.e. the creation of relatively simple and illustrative sketches, which generalize the issue satisfactorily, show the individual parameters (glazing, shading, shape, size, etc.) and change need of heat for heating passive house. The results of the work will be useful when the architect picks up the pencil and starts to think about his future house. At this point, he will have on hand sketches, which give him an idea and streamline his further design. Therefore the main goal is to create new outcomes and identify energy behaviour of buildings with a computational tool. This research works with virtual idealized mathematical model in the software PHPP 2007 CZ and uses "phenomenon" of parametric equations and sensitivity analysis.

Energy from solar photovoltaic (PV) are generated as direct current (DC) and almost all of today’s electrical loads in residential buildings, household appliances and HVAC system (Heating Ventilation and Air-conditioning) are operated on DC. For a conventional alternating current (AC) distribution system this requires the need for multiple conversion steps before the final user-stage. By switching the distribution system to DC, conversion steps between AC to DC can be avoided and, in that way, losses are reduced. Including a battery storage–the system’s losses can be reduced further and the generated PV energy is even better utilised. This thesis investigates and quantifies the energy savings when using a direct current distribution topology in a residential building together with distributed energy generation from solar photovoltaic and a battery storage. Measured load and PV generation data for a single-family house situated in Borås, Sweden is used as a case study for the analysis. Detailed and dynamic models–based on laboratory measurements of the power electronic converters and the battery–are also used to more accurately reflect the system’s dynamic performance. In this study a dynamic representation of the battery’s losses is presented which is based on laboratory measurements of the resistance and current dependency for a single lithium-ion cell based on Lithium iron phosphate (LFP). A comparative study is made with two others, commonly used, loss representations and evaluated with regards to the complete system’s performance, using the PV and load data from the single-family house. Results show that a detailed battery representation is important for a correct loss prediction when modelling the interaction between loads, PV and the battery. Four DC system topologies are also modelled and compared to an equivalent AC topology using the experimental findings from the power electronic converters and the battery measurements. Results from the quasi-dynamic modelling show that the annual energy savings potential from the suggested DC topologies ranges between 1.9–5.6%. The DC topologies also increase the PV utilisation by up to 10 percentage points, by reducing the associated losses from the inverter and the battery conversion. Results also show that the grid-tied converter is the main loss contributor and when a constant grid-tied efficiency is used, the energy savings are overestimated.

<p>This dissertation focuses on the creation of a paradigm shift in building innovation. Challenges in achieving building energy-efficiency at scale highlight the complexity of the building performance problem, which is embedded with social, cultural, physical, environmental, and economic factors. Traditional approaches to building design have difficulty accounting for these multi-faceted variables and related longitudinal barriers and intangible impacts. Firstly, key stakeholders and their economic constraints change throughout time, and this variability is not traditionally considered upfront or addressed throughout a building’s operation. Secondly, buildings have social, cultural, environmental and economic implications that are difficult to quantify and evaluate against strictly functional design objectives. Therefore, current deeply technical and often system-specific building design strategies could benefit from whole-building solutions that account for this complexity and enable a paradigm shift in design toward human-centered outcomes (i.e., well-being, health, financial sustainability) and effective (i.e., equitable and sustainable) buildings. </p> <p>To drive this shift, an impact-based innovation framework was employed to pursue system-level and ecosystem-level strategies to optimize longitudinal building value assessment and distribution. First, a grounded theory study was pursued which identified gaps in current design practice that miss underlying building subsystem interactions which influence building performance. A system-level taxonomy of the building was then defined, linking identified sub-system synergies to functional, emotional and social building benefits for inhabitants. Then, an exploratory mixed-methods study was pursued, yielding a longitudinal building value framework that helps characterize key stakeholders, building design choices, and shared efficacy metrics. Building on these inputs, a multi-stakeholder, longitudinal building value assessment model was developed. The model was tested on two residential building development scenarios, highlighting its ability to capture the true impact of buildings on affected stakeholders over time in terms of tangible and intangible building costs and benefits. Finally, business model innovation concepts were employed to identify specific changes in stakeholder value delivery and capture strategies that could redistribute building costs and benefits over time, and thereby facilitate a shift in the paradigm of design and value capture in the residential building industry. </p>

В работе рассмотрен процесс проектирования систем вентиляции «Как есть». Определена взаимосвязь работ в проектировании вентиляции со смежными разделами проектирования, что скорректировало общий график работ. Были определены трудозатратные работы, требующие автоматизации. В процессе выполнения магистерской диссертации было разработано приложение, которое позволяет повысить эффективность производственных процессов компании. / The paper considers the process of designing ventilation systems. The interrelation of work in ventilation design with adjacent design sections has been determined, which has adjusted the overall work schedule. Labor-intensive work requiring automation has been identified. In the process of completing the master's thesis, an application was developed that allows you to increase the efficiency of the company's production processes.