Fuktskador är ett problem som kan uppstå vid byggnation i trä om konstruktionen exponeras för nederbörd under byggtiden. Mätning av fuktkvoter i trä kan utföras med flera olika instrument och metoder. Syftet med arbetet är att studera fuktkvotsförändringar i korslimmade träelement som utsätts för långvarig nederbörd i laborationsmiljö. För att utveckla detta område har Linnéuniversitetet tillsammans med Saab utvecklat ett eget mätinstrument. Instrumentet mäter resistans i trä som jämförs med mätvärden från ett annat instrument vid namn Gigamodule. Det egenutvecklade sensorkortet är fortfarande under utveckling. Förutom i arbetets försöksuppställning testas instrumentet även i en byggnad i Växjö. För kontroll av mätresultat har fler metoder och instrument använts. Två modeller har använts som representerar detalj vid anslutning av väggelement-och mellanbjälklag. Båda modellerna har under lika lång tid varit nedsänkta i vattenbad. Försöksuppställningen har utförts mellan 19:e april och 18:e maj 2018. Mätningar och beräkningar har resulterat i jämförbara resultat. Skillnader i resultat utifrån träets fiberriktning har visats från flera instrument. KL-träelementen har uppvisat en god förmåga att trots höga fuktkvotsvärden torka ut och återgå mot normala värden under mätperioden. / Moisture related damage is an occurring problem in wood-based buildings if the material is exposed to rainfall during construction. Measurement of moisture content can be done with various instruments and methods. The purpose of the thesis is to study change in moisture content in cross-laminated-timber, with prolonged exposure to water in laboratory environment. To advance the field, the Linnaeus University has been developing a measurement instrument of their own in collaboration with the company Saab. The instrument measures electrical resistance in wood where the obtained values will be compared to similar measurements from a product named Gigamodule. The self-developed sensor card is still a product under development. In addition to the lab setting measurements the instrument was also installed in a local building in Växjö. To verify the result from the previously mentioned resistance measurers additional instruments and methods have been utilized. Two separate models have been used to represent the detail of the connection between the wall element and the joist. Both models have been submerged under water for an equal amount of time. The experimental setting took place between the 19th of April to the 18th of May 2018. The measurements and calculations have been resulting in values that can be the subject of internal evaluation. Difference in result based on the direction of the grain have been observed in several measurement methods. The CLT-elements demonstrated good drying properties despite periodically high moisture content and the wood indicate a return towards initial levels of moisture.

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / The difficulty of obtaining dry wood with a low incidence of defects is a challenge when it comes to eucalyptus wood, since the species of this genus exhibit drying difficult and high expression of defects, contributing to their use is limited and the level of losses on many occasions raised. The main objective of this study was to develop and evaluate programs for drying wood Corymbia citriodora, Eucalyptus robusta and Eucalyptus saligna. For this, it was evaluated drying parameters and physical characteristics of the species in preliminary tests, using equations to establish the drying programs for each species. Underwent two batches of 32 tablets with 270,0 x 15,0 x 2,5 (length, width and thickness), respectively, of each kind, drying using the same drying program for each species. For each batch, we used four control samples to monitor the moisture content and four boards for the evaluation of moisture gradients during drying and standardization phase. The programs were evaluated for drying the drying rate, the manifestation of defects, the final moisture content, the shrinkage, moisture gradient and the standardization phase. The drying rate in the application of drying programs maintained the trend presented during the preliminary assessment, with values equal to 5,38 x10-4, 1,10 x10-3 e 7,96x10-4 g/cm³.h for Corymbia citriodora, Eucalyptus robusta and Eucalyptus saligna, respectively. For the final moisture content, the three species showed variation satisfactory, and the Corymbia citriodora showed less dispersion between the parts, followed by Eucalyptus saligna and Eucalyptus robusta. The qualitative assessments showed that the wood, in general, the species which obtained the best results was Corymbia citriodora, followed by Eucalyptus saligna robust and Eucalyptus. The same trend was observed for the contractions during drying was not observed for the species difference between the coefficient anisotropic. The time used for the standardization step is only sufficient for Eucalyptus robusta, the moisture content which presented below 4% after the end of the standardization. / A dificuldade de obter-se madeira seca com reduzida incidência de defeitos é um desafio quando se trata de madeira de eucalipto, visto que as espécies deste gênero apresentam secagem difícil e elevada incidência de defeitos, contribuindo para que a sua utilização seja limitada e o nível de perdas, em muitas ocasiões, elevado. O objetivo principal deste estudo foi elaborar e avaliar programas de secagem para madeira de Corymbia citriodora, Eucalyptus robusta e Eucalyptus saligna. Para isso, avaliaram-se parâmetros de secagem e características físicas das espécies em ensaios prévios, utilizando equações para elaborar os programas de secagem para cada uma das espécies. Submeteram-se dois lotes, com 32 tábuas de 270,0 x 15,0 x 2,5 cm (comprimento, largura e espessura), respectivamente, de cada espécie, à secagem utilizando o mesmo programa de secagem para cada espécie. Para cada lote, utilizaram-se quatro amostras de controle para o monitoramento do teor de umidade e outras quatro tábuas para as avaliações dos gradientes de umidade, durante a secagem e na fase de uniformização. Os programas de secagem foram avaliados quanto a taxa de secagem, manifestação de defeitos, o teor de umidade final, retratibilidade, gradiente de umidade e etapa de uniformização. A taxa de secagem na aplicação dos programas de secagem manteve a tendência apresentada durante a avaliação prévia, com valores iguais a 5,38x10-4, 11,0x10-4 e 7,96x10-4 g/cm2.h, respectivamente para o Corymbia citriodora, Eucalyptus robusta e Eucalyptus saligna, sendo que as mesmas apresentaram massa específica básica de 0,82, 0,61 e 0,69 g/cm³, respectivamente. Para o teor de umidade final, as três espécies apresentaram variação satisfatória, sendo que o Corymbia citriodora mostrou a menor dispersão entre as peças, seguido pelo Eucalyptus saligna e Eucalyptus robusta. As avaliações qualitativas da madeira indicaram que, de modo geral, a espécie que obteve os melhores resultados foi o Corymbia citriodora, seguida pela de Eucalyptus saligna e pela de Eucalyptus robusta. A mesma tendência foi verificada para as contrações durante a secagem, não se verificando diferença entre as espécies para o coeficiente anisotrópico. O tempo aplicado para a etapa de uniformização foi suficiente apenas para o Eucalyptus robusta, o qual apresentou gradientes de umidade abaixo de 4% após o final da uniformização.

Aspen (Populus tremula L.) accounts for about 2% of the total wood stock in Sweden. Sawmills use only a small part (about 5,000 m³fub) of round wood aspen per year. Since there are no Swedish gradings and design values for aspen, no aspen is used for structural purposes. This also applies to other hardwood trees in Sweden. Aspen is mainly used for pulp and paper with a mass consumption of 800,000 m³fub per year of which about 50% is imported. Most imported aspen is from Russia and the Baltics. The other major use of aspen is in match industries. Consumption for matches amounts to approximately 30,000 m³fub per year in Sweden. The aim of the research work was to increase knowledge on the wood quality of aspen used in the production of matches. Aspen (Populus tremula L.) logs were collected from two different sites in Sweden and a non-destructive tools weas used to estimate the modulus of elasticity in logs. To measure the dynamic modulus of elasticity (MOEdyn), Fakopp resonance log grader used. Other properties like density and moisture content were measure and were correlated with the MOEdyn values in order to identify the site that has a better log quality. Besides, horizontal and vertical variation of different wood properties were measured and compared within and between trees from two different sites in order to justify the variation of log quality. A total of 20 trees from Askaremåla and Vimmerby, Sweden were felled and used in this study. From each tree, 3 m long logs were sampled from each base, middle and top. After that, non-destructive evaluations were performed in those logs. Besides, 5 cm thick discs were collected in every tree height (base, middle and top) to measure horizontal and vertical variations. This study shows that there were differences in MOEdyn between and within trees. It was evident that trees collected from Vimmerby had a better log property than that in Askaremåla. Using non-destructive tools, it is possible to sort out quality logs for the production of Swedish matches.

Orientador: Sylvio Luis Honorio / Tese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Agricola / Made available in DSpace on 2018-08-08T08:41:42Z (GMT). No. of bitstreams: 1 Portugal_EdilbertoPrinci_D.pdf: 3108115 bytes, checksum: 834974ae808b2dc8cae3ca812f9976ba (MD5) Previous issue date: 2006 / Resumo: A Stevia rebaudiana, um arbusto que tem na produção de esteviosídeos seu principal produto de interesse, foi objeto deste trabalho. Considerando sua cadeia produtiva, existem lacunas que necessitam pesquisas, tanto no aspecto agronômico, como o emprego de espécies fúngicas micorrízicas, quanto procedimentos pós-colheita, dos quais a secagem é um dos fatores. O presente trabalho teve como objetivos, identificar uma espécie de fungo micorrízico arbuscular eficiente e sua relação com o desenvolvimento e concentração de esteviosídeos em plantas de estévia, cultivadas em campo, hidroponia e aeroponia, selecionar substrato adequado para o desenvolvimento da colonização micorrízica, avaliar sistemas de secagem no teor de esteviosídeos e determinar as isotermas de sorção da estévia. Para seleção de fungo micorrízico foram testadas sete espécies, sendo cinco de um banco de culturas e duas isoladas da própria cultura da estévia. O ensaio foi conduzido em casa de vegetação em vasos com solo esterilizado e cinco repetições. Foram determinados a massa seca total da parte aérea e de folhas, teor e quantidade acumulada de esteviosídeos nas folhas e colonização micorrízica. Para seleção de substratos, foram testados nove produtos comerciais, utilizando-se como planta indicadora uma gramínea (Brachiaria humidicola) e como parâmetro avaliado a taxa de colonização fúngica no sistema radicular. Plantas de estévia inoculadas ou não com o fungo micorrízico Glomus intraradices foram cultivadas em três sistemas distintos, campo, aeroponia e hidroponia. Foram realizadas três colheitas em épocas distintas e determinada a massa da matéria seca total da parte aérea e de folhas, teor e acúmulo de esteviosídeos nas folhas e colonização micorrízica. Foram testados três processos de secagem, ao sol, secador a gás e estufa elétrica com circulação forçada de ar, à temperatura de 45oC. Os processos foram avaliados em função do teor de esteviosídeos nas folhas. A determinação da umidade de equilíbrio nas folhas de estévia foi realizada nas temperaturas de 30 e 45oC e, as isotermas de sorção foram tratadas com os modelos matemáticos de BET, BET linear, Peleg, GAB, Halsey, Langmuir, Oswin, Henderson e Chung e Pfost. A espécie Glomus intraradices foi a mais eficiente para o desenvolvimento da estévia e acumulação de esteviosídeos. O substrato Rendmax Citrus sem adubação propiciou as melhores condições para a colonização micorrízica nas raízes da gramínea. Dentre os sistemas de cultivo estudados a hidroponia mostrou-se o menos eficiente para o cultivo de estévia. Em aeroponia obteve-se maior produtividade em termos de matéria seca da parte aérea, enquanto no campo maior quantidade acumulada de esteviosídeos. Não se observou diferença entre a secagem na estufa e no secador para qualquer das épocas de colheita. O teor de esteviosídeos nas folhas de plantas secadas ao sol foi sempre inferior, com perda de até 20% em relação aos outros dois sistemas. Os modelos que apresentaram melhor ajuste, nas temperaturas de 30 e 45oC, foram GAB e HALSEY. O modelo BET LINEAR também mostrou bom ajuste, mas somente para a temperatura de 45oC / Abstract: Stevia rebaudiana, a shrub mostly interesting for its production of steviosides, was the object of this work. In regard to its productive chain, further researches must be done, not only in agronomical aspects, but also in the utilization of mycorrhizal fungal species, as well as in the post-harvest processes, namely the drying one. The present work aimed at the identification of an efficient arbuscular mycorrhizal fungal species and its influence in the development and concentration of steviosides in stevia plants grown in hydroponic and aeroponic systems; to select an adequate substrate for the development of mycorrhizal fungi; to evaluate drying systems in steviosides rates and to determine stevia?s isotherms of sorption. For the mycorrhizal fungi selection seven species were tested, five from a germplasm bank and two were isolated from their own stevia culture. Five assays in pots with sterilized soil were carried out in a greenhouse. The total dry mass of the aerial parts and of the leaves, the rate and accumulated quantity of steviosides in the leaves as well as the mycorrhizal colonization were determined. Nine commercial substrates were tested for the rate of colonization of the root system of an indicating gramineous plant (Brachiaria humidicola). Stevia plants that were inoculated (or not) with the mycorrhizal fungus Glomus intraradices were cultivated in three different growing systems, field, aeroponic and hydroponic. Three harvests were carried out in different periods and the total dry mass of the branch and leaves sections, contents and accumulated steviosides in the leaves and mycorrhizal colonization were determined. Three processes for drying leaves were tested: by sunlight, gas dryer and electrical stove with forced air circulation, at 45oC. The processes were evaluated in relation to the steviosides rate of the leaves. The equilibrium moisture content for stevia leaves was done at 30oC and 45oC, while the isotherms of sorption were tested for the best fit by mathematical models of BET, BET linear, Peleg, Gab, Halsey, Langmuir, Oswin, Henderson and Chung and Pfost. The Glomus intraradices species was the most efficient for the stevia development and accumulation of steviosides. The Rendmax Citrus substrate without manure rendered the best conditions for the mycorrhizal colonization in the gramineous roots. Among the growing systems studied, hydroponics turned out to be the least efficient for stevia cultivation. Aeroponics brought the highest production in terms of dry mass from the aerial parts, while in the field a larger accumulated quantity of steviosides was obtained. No difference was observed between the stove and gas drying processes at any of the harvesting periods. The steviosides rate from the leaves dried by sunlight was always inferior, coming to a loss of 20% in relation to the others. The best fit models were GAB and HALSEY. The BET LINEAR fitted by 45ºC / Doutorado / Tecnologia Pós-Colheita / Doutor em Engenharia Agrícola

O objetivo deste trabalho é avaliar a influência da variação do teor de umidade no valor do módulo de resiliência (MR) de um solo argiloso de subleito, tendo em vista que este parâmetro é muito susceptível à variações climáticas ambientais. Foram realizados ensaios triaxiais cíclicos para se estimar o módulo de resiliência de corpos de prova ensaiados em diversas condições de umidade. Verificou-se que o MR é influenciado pela tensão desvio, de forma que aquele aumenta com o acréscimo desta. Constatou-se que os corpos de prova moldados na Wot e submetidos a trajetórias de secagem e umedecimento alcançaram valores de MR superiores e inferiores, respectivamente, ao se comparar com o MR de corpos de prova ensaiados na Wot. Este fato foi também observado para os corpos de prova moldados com massa específica seca máxima, em teores de umidade abaixo e acima do teor ótimo. Determinou-se, ainda, a sucção no solo através do método do papel filtro e levantou-se a sua curva característica. Verificou-se que à medida que a umidade aumenta, a sucção diminui. Observou-se que o valor do MR aumenta com o aumento da sucção no solo. Este crescimento é tanto maior quanto maior seja a tensão desvio aplicada. Foi possível determinar a relação entre o MR, a tensão desvio e o módulo tangente inicial (Eo), proveniente dos ensaios de compressão simples. Relacionou-se, também, o Eo e a sucção no solo. / The aim of this work is to evaluate the influence of moisture content variation in resilient modulus value (MR) of a subgrade clayey soil, considering that this parameter is very susceptible to environmental climatic variations. Cyclic triaxial tests were performed to acess resilient modulus of specimens tested in several moisture conditions. lt has been verified that MR is influenced by deviator stress, so that the former increases with the latter increases. lt has been confirmed that specimens molded in Wot and submited to a drying and moistening route reached MR values higher and lower, respectively, to compare with MR of specimens tested in Wot. This fact was also observed for the specimens molded with dry density, in moisture contents below and above of optimum moisture content. lt has been also determined the soil suction using filter paper method and it has been built its characteristic curve. lt has been verified that when moisture increases, the suction decreases. lt has been observed that MR value increases with the soil suction increase. This increase is as bigger as bigger the applied deviator stress be. lt was possible to determine the relationship between MR, deviator stress and parameters from compressive strength tests. lt has been related parameters from compressive strength tests and soil suction.

Na construção de rodovias, as condições de umidade e densidade observadas na compactação são, geralmente, próximas daquelas correspondentes ao pico da curva de compactação obtida no ensaio Proctor. É sabido que variações ambientais no decorrer da vida do pavimento podem alterar, de maneira significativa, a umidade do subleito e dos seus componentes e assim, as suas propriedades resilientes. O objetivo principal desta pesquisa é avaliar a influência da variação da umidade pós-compactação no módulo de resiliência de solos de rodovias do interior paulista a partir de resultados de ensaios de laboratório. Foram coletados e caracterizados setenta e três solos, e, dentre estes, selecionados trinta para a etapa de estudo da variação da umidade pós-compactação, após a realização de ensaios MCT, difração de raios-x, microscopia eletrônica de varredura e azul de metileno para determinação da gênese. Os solos selecionados apresentam características distintas quanto à gênese, sendo metade laterítico e metade não-laterítico. Os corpos-de-prova foram compactados na umidade ótima e submetidos a processos de secagem e umedecimento e, posteriormente, realizados ensaios triaxiais cíclicos. Os resultados permitiram a modelagem do 'M IND.R' em função do estado de tensão para diferentes umidades e a avaliação da competência de alguns modelos matemáticos nesta representação. Estudou-se a influência da gênese e da granulometria sobre o valor do 'M IND.R' e avaliou-se a conseqüência da variação da umidade sobre este para solos lateríticos e não-lateríticos. Determinou-se uma expressão para estimar a variação do 'M IND.R' com a variação da umidade a partir do parâmetro k1, independentemente do estado de tensão. Pesquisou-se a existência de relações entre os parâmetros de regressão do modelo composto e os resultados dos ensaios de compressão simples e as propriedades físicas dos solos, de forma a permitir a estimativa do módulo de resiliência a partir do resultado de ensaios mais simples. Investigou-se a possibilidade de se utilizar as relações entre a variação do módulo tangente inicial com a variação da umidade para estimar os efeitos sobre o 'M IND.R'. / On road construction, the field compaction conditions are usually close to those determined from Proctor tests. Environmental variations may lead to changes in the pavement moisture and also changing its resilient properties. The main objective of this research is to study the influence of post-compaction moisture content variation on the resilient modulus of soils from São Paulo state pavements, using laboratory tests. To accomplish this objective, seventy three soils samples were collected and characterized. Among them, thirty samples were selected, after four different tests were carried out to determine the soils genesis, to study the post-compaction moisture content variation. Half of these selected soils are lateritic ones, and the other half are non-lateritic soils. The specimens were compacted at optimum moisture content and submitted to drying and moistening processes prior cyclic triaxial test to be carried out. The results allowed the resilient modulus modeling as a function at the stress state and the performance evaluation of five different models. The genesis and grain size distribution influence on the resilient modulus values were studied. The effects of moisture content variations on lateritic and non-lateritic soils were investigated. An expression to estimate the resilient modulus variations with the moisture variations was determined, independently of the stress state. The existence of relations of the compound model regression parameters with the results of unconfined compressive strength and soil properties were studied. The possibility of using the initial tangent modulus variations with the moisture variations to estimate the effects on the resilient modulus were also investigated.

A pesquisa foi conduzida nos laboratórios de Análise de Sementes do Departamento de Produção Vegetal, USP/ESALQ, e do Departamento de Horticultura e Agricultura da Universidade do Estado de Ohio, Columbus, OH, E.U.A. O trabalho procurou avaliar a eficiência de diferentes processos de condicionamento fisiológico de sementes de cebola, bem como estudar o efeito da secagem e do armazenamento sobre o potencial fisiológico das sementes condicionadas. O trabalho foi conduzido em três etapas; na primeira, utilizandose 6 lotes de sementes do cultivar Granex 33, avaliaram-se três procedimentos para o condicionamento fisiológico: a) hidratação das sementes entre folhas de papel toalha, durante 48 e 96 horas, a 15ºC; b) osmocondicionamento em solução de PEG 8000, sob potenciais hídricos de –0,5 MPa e –1,0 MPa, durante 24 e 48 horas, a 15ºC e c) hidratação das sementes com utilização do método do tambor, a 15ºC e 25ºC, em que as quantidades de água adicionadas e o período de hidratação foram variáveis entre os diferentes lotes. A segunda etapa constou do estudo de diferentes procedimentos de secagem após o condicionamento fisiológico. Para tanto, após o hidrocondicionamento entre folhas de papel toalha, por 48h, seis lotes do cultivar Petroline, foram submetidos a secagem rápida (em estufa com circulação de ar) e a secagem lenta (em câmara a 20ºC e umidade relativa de 50%-55% durante 72h). Foi também, avaliada a influência da incubação pré-secagem, utilizando-se: a) soluções de PEG 8000, a 8ºC durante 24, 72 ou 120 horas; b) banho-maria a 40ºC, durante 1, 3 e 5 horas; e c) em estufa, a 35ºC, durante 24 e 48 horas. Na terceira fase da pesquisa, avaliou-se o potencial de armazenamento das sementes, de quatro lotes de sementes de três cultivares (Petroline, Primavera e Crioula Mercosul), submetidas ao hidrocondicionamento e secagem rápida; as sementes foram armazenadas em câmara seca (50% de umidade relativa do ar, a 20ºC) e em ambiente de laboratório, durante 9 meses. Os resultados permitiram concluir que: a) o hidrocondicionamento, envolvendo a embebição entre folhas de papel toalha, constitui procedimento adequado para o condicionamento fisiológico de sementes de cebola, beneficiando principalmente a velocidade de germinação; b) a definição de procedimentos para o condicionamento fisiológico deve considerar o grau de umidade das sementes após a hidratação, não sendo recomendada a embebição durante período pré-determinado; as sementes de cebola devem atingir grau de umidade de 44% a 49% após a hidratação; c) o processo de secagem rápida, em estufa com circulação de ar, a 35ºC-40ºC, é mais conveniente para a secagem de sementes de cebola condicionadas, tornando-as tolerantes à dessecação e d) o desempenho das sementes durante o armazenamento após o condicionamento fisiológico é dependente do genótipo utilizado. / This work was carried out at the seed analysis laboratories of the Department of Crop Science, Escola Superior de Agricultura “Luiz de Queiroz” (USP/ESALQ) and of the Department of Horticulture and Crop Science of the Ohio State University. The objectives were to study different methods of priming for onion seeds and also to verify the influence of drying and storage on the physiological potential of primed seeds. The research was conducted in three phases. First, using six lots of onion seeds (cultivar Granex 33), the effects of three priming techniques were compared: a) hydropriming, through seed imbibition between layers of paper towel, for 48 or 96 h, at 15ºC; b) osmopriming, using PEG 8000 solution with osmotic potentials of – 0.5 MPa and –1.0 MPa, for 24 and 48 h, at 15ºC) and c) seed hydration by the drum priming technique, at 15ºC and 25ºC, which the optimal amount of water added and imbibition periods were variable among seed lots. At the second phase, drying procedures after priming were tested. For that, after hydropriming (between layers of paper towel, for 48h), six lots of “Petroline”, were submitted to fast drying (in an oven with air circulation) and to slow drying (in a chamber at 20ºC and 50%-60% relative humidity, for 72h). The influence of pre-drying incubation was also evaluated by using: a) PEG 8000 solution, at 8ºC, for 24, 72 and 120h; b) waterbath at 40ºC, for 1, 3 and 5h; and c) incubation in an oven, at 35ºC, for 24 and 48h. In the third phase, the storability of four seed lots each of three cultivars (Petroline, Primavera and Crioula Mercosul), hydroprimed and fast dried, was evaluated; samples of those lots were stored in a dry chamber (relative humidity around 50%, at 20ºC) and in the laboratory environment, during 9 months. The results showed that: a) the hydropriming, between layers of paper towel, is an adequate procedure for priming onion seeds, with beneficial effects mainly on speed of germination; b) for choosing the physiological conditioning procedure, the seed moisture content should be considered after hydration, it’s not being recommended the imbibition during pre-determined period; the onion seeds should reach moisture content of 44% to 49% after the hydration; c) the process of fast drying, in oven with air circulation, at 35ºC-40ºC, is convenient for the drying of primed onion seeds, inducing desiccation tolerance and d) the primed seed performance during storage is dependent on genotypes.

Abstract The main objective of this thesis was to research and develop a sensitive characterization method for dielectric powdery substances which could be utilized in various industrial and research fields. With modern electromagnetic simulation tools and the presented experimental measurements, the characterization of dielectric powders using an indirectly coupled open-ended coaxial cavity resonator operating in TEM mode at 4.5 GHz was found to have potential. The modelling and the experimental measurement results of commonly used dielectric powders revealed that, from the nine classical mixing rules, it was possible to derive reliable inclusion permittivity values when using the properties of the perturbed resonator and the Bruggeman symmetric and the Looyenga mixing theories. In addition, the determination accuracy of the inclusion permittivity was found to be greatly improved with the correction factor included into the previously presented permittivity equation of the quarter wave coaxial resonator. Determination of the dielectric losses was found to be reliable when using the differences between the perturbed and unperturbed resonator and the general mixing model equation. The sensitivity of the characterization method was researched with both humidity exposed and surfactant treated modified SiO2, Al2O3 and ZrO2 powders. Experimental results showed that the effect of adsorbed water on the particles was most pronounced when measuring the dielectric losses of the inclusions. Furthermore, a clear correlation with the theory of the general mixing model was found. Thus, in addition to the changed dielectric properties between dry and humidity exposed powders, it was also possible to determine the moisture content with reasonable accuracy. This correlated well with the traditional, mass based, determination. Stearic acid coating of the particles induced only a small change in inclusion permittivity but a notable change in dielectric losses. Unlike the cases with the larger particle sized SiO2 and Al2O3, the dielectric loss of ZrO2 inclusions, with stearic acid coating, was decreased significantly from 6.2 × 10-3 to 3.8 × 10-3. When characterizing magnesium and calcium titanate composite powders, with CaTiO3 molar ratios of 0.0, 0.02, 0.05 and 0.1, the method was found to have good sensitivity and accuracy. Additions of CaTiO3 exhibited a clear increase in net inclusion permittivities from 13.4 up to 14.9 and in dielectric loss tangents from 7.1 × 10-3 up to 8.5 × 10-3. In addition, a good correlation was found in the theoretical determination of the CaTiO3 molar ratios using the resonator measurement results and the general mixing model. The characterization method was proved to be capable of measuring the dielectric properties and detecting even very slight changes in the powders. Thus, the method could be utilized in various types of powdery material characterization, for example, in the analysis and quality control of different composite powders. / Tiivistelmä Väitöstyön päätavoitteena oli tutkia ja kehittää herkkä jauhemaisten eristemateriaalien karakterisointimenetelmä, jota voitaisiin hyödyntää usealla teollisuuden ja tutkimuksen alueella. Hyödyntäen nykyaikaisia sähkömagnetiikan simulointityökaluja sekä kokeellisia mittauksia, havaittiin TEM -moodissa 4,5 GHz taajuudella toimivan avoimen epäsuorasti kytketyn koaksiaalionteloresonaattorin soveltuvan karakterisoimaan eristejauheita. Sähkömagneettinenmallinnus yhdessä yleisesti käytettyjen eristejauheiden kokeellisten mittausten kanssa osoitti, että partikkelin permittiivisyysarvot voitiin johtaa luotettavasti. Tällöin käytettiin näytemateriaalilla täytetyn resonaattorin ominaisuuksia, sekä yhdeksästä vertaillusta klassisesta sekoitusyhtälöstä Bruggeman symmetristä ja Looyengan sekoitusteorioita. Tämän lisäksi tarkkuutta voitiin parantaa huomattavasti lisäämällä korjauskerroin aikaisemmin julkaistuun neljännesaalto-koaksiaaliresonaattorin permittiivisyyden määrittävään yhtälöön. Eristehäviöiden määrittäminen havaittiin luotettavaksi, kun käytettiin mitattavalla materiaalilla muutetun ja tyhjän resonaattorin ominaisuuksien eroja, sekä general mixing model -yhtälöä. Karakterisointimenetelmän herkkyys tutkittiin ilmankosteudelle altistetuilla, sekä pintakäsittelyllä muutetuilla SiO2, Al2O3 ja ZrO2 -jauheilla. Mittaustulokset osoittivat, että partikkelin pinnalle adsorpoituneen veden vaikutus oli kaikkein korostunein, kun mitattiin partikkelien eristehäviöitä. Tämän lisäksi havaittiin myös selkeä korrelaatio general mixing model -teorian kanssa. Näin ollen muuttuneiden eristeominaisuuksien määritysten lisäksi voitiin määrittää jauheen kosteussisältö riittävällä tarkkuudella. Tulokset korreloivat hyvin perinteisen massaeroihin perustuvan määrittämisen kanssa. Partikkelien pinnoitus steariinihapolla aiheutti ainoastaan pienen muutoksen permittiivisyyteen mutta merkittävän muutoksen eristehäviöihin. Toisin kuin suuremman partikkelikoon SiO2:lla ja Al2O3:lla ZrO2 -partikkelin eristehäviö laski huomattavasti steariinihappopinnoituksen jälkeen, 6,2 × 10-3:sta 3,8 × 10-3:een. Karakterisoitaessa magnesium- ja kalsiumtitanaattikomposiittijauheita käyttämällä CaTiO3 -moolisuhteita 0,0, 0,02, 0,05 ja 0,1 menetelmällä havaittiin olevan hyvä herkkyys ja tarkkuus mitattavan materiaalin muutoksille. CaTiO3 -määrän lisäykset aiheuttivat selkeän nousun partikkelien kokonaispermittiivisyyksissä, joka kasvoi 13,4:sta 14,9:ään, sekä häviötangentissa, joka kasvoi 7,1 × 10-3:sta aina 8,5 × 10-3:een. Tämän lisäksi resonaattorin mitattuihin ominaisuuksiin sekä general mixing model -yhtälöön perustuvan teoreettisen määrityksen havaittin korreloivan hyvin CaTiO3 -moolisuhteisiin. Karakterisointimenetelmän osoitettiin soveltuvan eristeominaisuuksien mittaukseen sekä havaitsemaan jopa erittäin pienet muutokset jauheiden eristeominaisuuksissa. Menetelmää voitaisiin hyödyntää usean tyyppisissä jauhemateriaalien ominaisuuksien määrityksissä, kuten esimerkiksi erilaisten komposiittijauheiden analysoinnissa ja laaduntarkkailussa.

In the pharmaceutical industry, it is always important to have reproducible processes and raw materials of high quality to ensure good quality products. AstraZeneca, that is a leading manufacturer of different pharmaceuticals, works according to GMP to make sure that their processes deliver products of the same quality every time. A problem that has occurred at AstraZeneca is when a raw material is not properly understood and variations in the raw material affects the final product. Variations in drug release in one of AstraZeneca´s products, Product X, has been linked to the cushioning excipient Microcrystalline cellulose (MCC). Variations in drug release has been noticed during change from one batch of MCC to another. The aim of this study was to investigate which material attributes of MCC that contributes to variations in the final product. Particle size and moisture content were identified as critical material attributes (CMA´s) and were therefore chosen to be investigated more thoroughly. By variating particle size and moisture content during manufacturing of Product X, the influence of these attributes could be investigated using Design of Experiment (DoE). An additional experiment that compared two MCC batches from different suppliers was also performed during this study. The results from these experiments showed that the particle size and moisture content of MCC does affect the drug release. Large particles and high moisture content gave rise to a faster drug release compared to small particles and low moisture content that gave rise to a slower drug release. It is however hard to draw conclusions regarding how small differences in particle size and moisture content could affect the drug release.

The risk of moistening wood material should be considered and avoided as varying moisture content in the air causes the wood to swell and shrink. Moisture content in the material has influence on its mechanical properties, which may lead to damage due to reduced strength of the material. Wood material should be stored in places where the external climate does not contribute to an increase in the moisture content of the element. An optimal storage location is where the moisture content of wood material decreases. The purpose of this study is to increase knowledge about how the moisture content in cross-laminated timber (CLT) changes under different storage conditions. To achieve the purpose and get a broad picture of how moisture varies within CLT element, a measurement method that could handle measurements at different depths in the element was chosen. Furthermore, the CLT elements were placed in several storage places that simulated storage conditions at the workplace, where the amount of moisture in the environment varied based on the diurnal variation. The study has shown that, over the entire measurement period, the CLT elements that were placed indoors had a reduction of moisture content by 4.5%. The elements that were placed in a tent hall showed a decreasing of moisture content by about 1.5%. The elements that were placed outdoors with weather protection had an increasing moisture ratio of about 3%. The elements that were placed outdoors without weather protection had been affected greatly by the external climate and during precipitation the moisture content increased even greater. According to the study, CLT should be stored indoors or in a tent hall where the external climate does not contribute to an increase in the element's moisture content compared with outdoor storage. Furthermore, the study showed that cracks in the CLT elements led to higher moisture contents in the material. For the elements that were placed outdoors without weather protection that the cracked element reached its saturation point during precipitation, while the element without cracks showed increase of moisture content by a certain percentage and this increase is much slower.