The topic of this thesis is synthesis and preparation of lead-free pizoceramic with perovskite structure, in particular potassium-sodium niobate (KNN). In theoretical part are described possibilities of KNN synthesis and of it’s shaping and sintering. Experimental part deals with three types of synthesis described in the theretical part – solid state reaction, hydrothermal synthesis, sol-gel synthesis, and subconsequentional shaping of prepared powders by uniaxial pressing, cold isostatic pressure method, sintering (classical in oven, in some cases SPS – spark plasma sintering) of such green body and their following properties like relative density, grain size or charge constant. Preparation of KNN powder by each described method took place, followed by shaping and sintering. Best properties were shown by SPS sintered samples, which reached the highest density and lowest grain growth.

The content of this thesis is about preparation and processing of lead-free piezoceramic materials with perovskite structure. Potassium sodium niobate (KNN) powder was prepared by solid state reaction (SSR) and liquid phase reaction (sol-gel reaction). The powders were formed by uniaxial and isostatic pressing and further sintered. The density, grain size and morphology were determined on the sintered samples. The powder, synthesised by SSR and sintered in a conventional furnace, was chosen as a standard. The maximum density achieved on samples after optimization of sintering cycle was 93 %TD. The sintering optimization involved a homogenization step at 950 °C, which promotes the correct development of the phase composition and microstructure, followed by sintering at 1120 °C. The same approach and sintering cycle were used for sintering the samples, prepared by sol-gel synthesis. The maximum density of the samples prepared by sol-gel reaction and sintered in a conventional way, was 92 %TD. For further comparison, both of the synthesised powders were sintered using SPS (spark plasma sintering), which increased their final density up to 97 %TD. The approximate value of the piezoelectric coefficient d33 (pC/N) has been measured on selected SSR samples with pure phase composition ((K0,5Na0,5)NbO3). The best measured value of d33 was around 100 pC/N.

Im Rahmen dieser Dissertation wird die Kopplung von einer ultraschnellen optischen Interband-Anregung und der Erzeugung von akustischen Phononen im ferroelektrischen Prototyp-Material Lithiumniobat (LiNbO3) studiert. Unter Verwendung der Anrege-Abfrage-Technik wird LiNbO3 mit ultrakurzen optischen Lichtimpulsen angeregt und die Antwort des LiNbO3-Kristallgitters mit harten Femtosekunden-Röntgenimpulsen abgefragt. Zur Erzeugung der ultrakurzen Röntgenimpulse (100 fs) wird eine kompakte, lasergetriebene Femtosekunden-Röntgenquelle mit einer 1 kHz Repetitionsrate genutzt. Die Stärke und die zeitliche Evolution der beobachteten integralen Röntgen-Reflektivität ausgewählter Bragg-Reflexionen ist charakteristisch für die Propagation von starken akustischen Deformationswellen in einem homogen angeregten Einkristall. Überraschenderweise weisen sowohl die Polarisation als auch die Propagationsgeschwindigkeit der aktivierten Phononmoden eine hohe Anisotropie in Abhängigkeit der Ausrichtung der ferroelektrischen Achse relativ zur Polarisation der optischen Anrege-Impulse auf. Die bekannten Kopplungsmechanismen, wie das elektronische Deformationspotential oder die anharmonische Phonon-Phonon-Wechselwirkung, sind zur Erklärung der akustischen Deformationswellen mit der beobachteten Amplitude und der hohen Anisotropie ungeeignet. Stattdessen konnte gezeigt werden, dass die impulsive mechanische Spannung über den piezoelektrischen Effekt erzeugt wird. Die dafür notwendige makroskopische elektrische Polarisation resultiert aus einem photoinduzierten Verschiebestrom, welcher die Folge der optischen Interband-Anregung mittels Zwei-Photonen-Absorption ist. Diese optisch-elektrisch-mechanische Kopplung zwischen dem nichtlinearen Leitfähigkeitstensor fünfter Ordnung, dem piezoelektrischen Tensor und den relevanten Phononmoden ermöglicht eine vollkommene Beschreibung der experimentellen Beobachtungen. / The coupling between an ultrafast optical interband excitation and the generation of acoustic phonons in the ferroelectric prototype material lithium niobate (LiNbO3) is studied. Employing the pump-probe technique, LiNbO3 is excited optically with ultrashort light pulses while the impact on the crystal lattice is probed by femtosecond hard x-ray pulses. A compact, laser-driven femtosecond x-ray source with a 1-kHz repetition rate provides 100-fs pulses for time-resolved experiments. With this experimental arrangement, the response of the LiNbO3 crystal lattice to a nonlinear optical excitation can be investigated. The strength and temporal evolution of the observed integrated x-ray reflectivity of selected Bragg reflections are consistent with the propagation of a strong acoustic strain wave in a homogeneously excited single crystal. Surprisingly, both the polarization of the activated phonon modes and the propagation velocity show a high anisotropy as a function of the ferroelectric axis orientation relative to the polarization of the optical excitation pulses. The previously known coupling mechanisms, such as the electronic deformation potential or the anharmonic phonon-phonon interaction, are insufficient to explain the observed deformation amplitude and high anisotropy of the acoustic strain waves. Instead, it is shown that the impulsive mechanical stress is generated via the piezoelectric effect. The required macroscopic electrical polarization is a result of a photoinduced shift current, which in turn is generated by the optical interband excitation via two-photon absorption. This optical-electrical-mechanical coupling between the fifth-order nonlinear conductivity tensor, the piezoelectric tensor, and the relevant phonon modes fully describe the experimental observations.

In this work the transient non-instantaneous polarization, i.e., laser-pulse injected small polarons and self-trapped excitons, is studied in the perovskite-like ferroelectric lithium niobate. The investigations span a time scale from femtoseconds to several hours. It is shown that the established small polaron picture is not able to describe transient absorption and photoluminescence of lithium niobate consistently. Several strong indications are presented demonstrating that the photoluminescence cannot be caused by geminate small polaron annihilation. Instead, the idea of radiatively decaying self-trapped excitons at the origin of the blue-green photoluminescence is revived. Excitons pinned on defect sites are proposed to lead to the already observed long-lived transient absorption in the blue spectral range in Mg- and Fe-doped crystals. Excitons pinned on iron-defects are studied in more detail. Their spectral fingerprint and absorption cross section is determined. Furthermore, it is shown that the occurrence of these pinned STEs can be tailored by chemical treatment of the samples and the experimental parameters such as the pump pulse intensity and photon energy. Based on the new experimental results and reviewing data published in literature, an atomistic picture of hopping and pinning of self-trapped excitons in lithium niobate is proposed. The question is addressed whether small polarons and self-trapped excitons in lithium niobate are coupled species in the sense that oppositely-charged polarons may merge into self-trapped excitons or STEs break into small polaron pairs. Decay kinetics of transient absorption and luminescence assigned to free small polarons and STEs indicate that this is not the case. For a more complete picture the ultrafast time scale is investigated as well. The formation times of small polarons and STEs are determined, which both lie in the range of 200 fs. No indications are found on the (sub)picosecond time scale indicating a coupling of both quasi-particle species either. In order to gain access to the formation of self-trapped excitons a custom-built femtosecond broadband fluorescence upconversion spectrometer is installed. Based on an already existing scheme, it is adapted to the inspection of weakly luminescent solid samples by changing to an all reflective geometry for luminescence collection. To avoid the necessity for an experimentally determined photometric correction of the used setup, an already established calculation method is extended considering the finite spectral bandwidth of the gate pulses. The findings presented here are important not only as fundamental research, but also regarding the technical application of lithium niobate and other similar nonlinear optical crystals. The simultaneous occurrence of both small polarons and self-trapped excitons is a rather rarely described phenomenon. Usually, the optical response of wide band gap oxide dielectrics is associated with only one of these quasi-particle species. This work may therefore be a stimulus to review the existing microscopic models for transient phenomena in other oxide dielectrics, which may help to improve their application in nonlinear optical and electro-optical devices. In this context the ultrafast transient photoluminescence spectroscopy established here for weakly luminescing solid samples may again provide valuable insight. With respect to lithium niobate, the results do not only resolve inconsistencies between the microscopic pictures described in literature, but also provide information regarding the extends to which the propagation of ultrashort laser pulses may be affected by (pinned-)STE absorption. It is shown that tailoring of the long-lived absorption center in the blue spectral range is possible, which may be used to avoid optical damage when high repetition rates are applied. It is important to emphasize that the microscopic model proposed in this work is mainly based on experimental indications. It is the task of further detailed theoretical investigations, e.g., via time-dependent density functional theory, to test whether the proposed model is justified. From an experimental perspective the important question remains whether (pinned-)STEs contribute to a photorefractive effect. In the experimentally easily accessible spectral range no absorption feature of mobile STEs is observed. As a complementary experimental technique, ultrafast holographic spectroscopy may reveal an excitonic contribution to photorefraction and provide further insight to STE transport and pinning phenomena.

In dieser Arbeit werden ferroelektrische Phasenübergänge in verspannten (K,Na)NbO3-Schichten erstmals mit Hilfe temperaturabhängiger dreidimensionaler Röntgenbeugung untersucht. Der Fokus liegt auf stark anisotrop verspannten Dünnschichten, die bei Raumtemperatur ein geordnetes Fischgräten-Domänenmuster mit einer periodischen Anordnung von monoklinen a1a2/MC-Phasen aufweisen. Bei Erhöhung der Temperatur durchlaufen die (K,Na)NbO3-Dünnschichten einen ferroelektrischen Phasenübergang in die orthorhombische Hochtemperaturphase, die sich durch regelmäßige, alternierenden a1/a2-Streifendomänen mit ausschließlich lateraler Polarisation auszeichnet. In-plane Röntgenmessungen zeigen, dass die Filmeinheitszellen eine kleine Verzerrung in der Ebene erfahren, was zur Bildung von vier verschiedenen Einheitszellvarianten und damit vier verschiedenen (Super-)Domänenvarianten führt. Durch den Vergleich von Röntgenbeugungsmessungen verschiedener Bragg-Reflexe an Filmen mit unterschiedlicher Schichtdicke ist es möglich, die spezifischen Beugungsmerkmale zu unterscheiden und sie den einzelnen Phasen zuzuordnen. Mit Hilfe von in situ temperaturabhängiger Röntgenbeugung ist es daher möglich, die Details des Phasenübergangs vom Fischgräten in das Streifen-Domänenmuster aufzudecken. Es zeigt sich, dass dieser sich über einen großen Temperaturbereich erstreckt und in mehreren Schritten vollzieht. Die Beobachtung von Phasenkoexistenz innerhalb des Übergangs und einer thermischen Hysterese in der Phasenübergangstemperatur lassen auf einen Phasenübergang erster Art schließen. Zudem hängt die Phasenübergangstemperatur stark von der Kaliumkonzentration x in der KxNa1-xNbO3-Dünnschicht ab und kann durch eine Änderung von x=0,95 (stärker kompressiv verspannt) auf x=0,8 (stärker tensil verspannt) um etwa 60 K erhöht werden. Darüber hinaus ist dies die erste Studie, die experimentell beobachtete dreidimensionale Domänenanordnungen direkt mit Berechnungen aus Phasenfeldsimulationen vergleicht. / In this work, ferroelectric phase transitions in strained (K,Na)NbO3 films are studied for the first time using in situ temperature-dependent three-dimensional X-ray diffraction. The focus lies on strongly anisotropically strained thin films, which exhibit a well-ordered herringbone domain pattern with a periodic arrangement of monoclinic a1a2/MC phases at room temperature. Upon increasing temperatures, the (K,Na)NbO3 thin films undergo a ferroelectric phase transition to the orthorhombic high-temperature phase, which is characterized by a regular pattern of alternating a1/a2 stripe domains with pure lateral polarization. In-plane X-ray measurements show that the film unit cells undergo a small in-plane distortion, leading to the formation of four different unit cell variants and thus four different (super)domain variants. By comparing X-ray diffraction measurements of different Bragg reflections of films with different film thicknesses, it is possible to distinguish the specific diffraction features and assign them to the individual phases observed at the different temperatures. Using in situ temperature-dependent X-ray diffraction, it is therefore possible to reveal the details of the phase transition from the a1a2/MC herringbone to the a1/a2 stripe domain pattern. It is shown to extend over a wide temperature range and to occur in several steps. The observation of phase coexistence within the transition and a thermal hysteresis in the phase transition temperature suggests a first-order type phase transition. Moreover, the phase transition temperature strongly depends on the molar concentration of potassium x in the KxNa1-xNbO3 thin film and can be increased by about 60 K by changing x=0.95 (more compressively strained) to x=0.8 (more tensile strained). Furthermore, this is the first study to directly compare experimentally observed three-dimensional domain arrangements with calculations from phase field simulations.

No description available.

No description available.

Die Ferroelektrische Lithografie ist ein im letzten Jahrzehnt entwickeltes Verfahren zur gezielten Steuerung des Aufbaus von Nanostrukturen auf ferroelektrischen Oberflächen. Hierbei wird ausgenutzt, dass die unterschiedlich orientierte Spontanpolarisation des Materials in den einzelnen Domänen zu einer charakteristischen Variation der Oberflächenchemie führt. Die vorliegende Dissertation behandelt die Umsetzung dieses Ansatzes zur gezielten und steuerbaren Deposition von Nanostrukturen aus Edelmetallen oder organischen Molekülen. Diese Deposition erfolgte mittels einer nasschemischen Prozessierung unter UV-Beleuchtung auf magnesiumdotierten, einkristallinen Lithiumniobat-Substraten. Als typisches Ergebnis zeigte sich sowohl für in Wasser gelöste Silber-, Gold- und Platinsalze als auch für wässrige Lösungen des organischen Fluoreszenzfarbstoffs Rhodamin 6G eine bevorzugte Abscheidung des Materials an den 180°-Domänenwänden auf der Substratoberfläche. Dabei beginnt die Abscheidung in Form einzelner Nanopartikel innerhalb eines 150−500 nm breiten Streifens parallel zur Domänenwand. Bei fortgesetzter Beleuchtung erfolgt ein weiteres Wachstum der Kristallite bis zur ihrer gegenseitigen Berührung. Damit ermöglicht dieser Abscheideprozess den Aufbau organischer oder metallisch polykristalliner Nanodrähte mit Abmessungen um 100 nm in Breite und Höhe. Die Länge ist lediglich durch die Probenabmessungen begrenzt. Die so erzeugten Strukturen wurden im Rahmen der experimentellen Arbeiten topografisch, elektrisch und optisch charakterisiert. Am Beispiel einzeln kontaktierter Platindrähte konnte dabei deren annähernd ohmsches Leitfähigkeitsverhalten nachgewiesen werden. Zudem reagiert der Widerstand eines solchen Platin-Nanodrahtes sehr sensitiv auf Änderungen des umgebenden Gasmediums, was die Eignung solcher Strukturen für die Integration in künftige Sensorbauelemente unterstreicht. Weitergehende Untersuchungen beschäftigten sich mit der Klärung der Ursachen dieser sogenannten Domänenwanddekoration. Hierzu wurde die Lage der abgeschiedenen Strukturen mit dem zu Grunde liegenden Domänenmuster verglichen. Bis auf wenige Ausnahmen wurde dabei eine auf die Domänengrenze zentrierte, symmetrische Bedeckung nachgewiesen. Als Erklärungsansatz wird die Trennung der photoinduzierten Elektron-Loch-Paare durch das elektrostatische Feld der Polarisations- und Abschirmladungen diskutiert. Diese führt zur Ladungsträgerakkumulation und erhöhten chemischen Reaktivität an den Domänengrenzen. / Ferroelectric lithography is a method for a controlled assembly of nanostructures on ferroelectric surfaces, which has has been established throughout the last decade. It exploits the characteristic variations in surface chemistry arising from the different orientations of the spontaneous polarisation within the separate domains. The scope of this thesis is the application of that approach for the directed and controlled deposition of nanostructures consisting of noble metals or organic molecules. For this deposition, a wet chemical processing under UV illumination was carried out on magnesium doped lithium niobate single crystals. As a typical result, the decoration of 180° domain walls was observed for aqueous solutions of silver, gold and platinum salts as well as for the dissolved organic fluorescent dye Rhodamine 6G. The deposition starts within a stripe of 150−500 nm in width parallel to the domain wall. Under continuing illumination, the crystallites grow further until they finally touch each other. Using this technique, organic or metallic polycrystalline nanowires with dimensions in the range of 100nm in width and height can be assembled. Their length is only limited by the sample size. These nanostructures were characterised in respect of their topographical, electrical and optical properties. In the case of contacted single platinum wires an electrical conduction was measured, which showed approximately ohmic behaviour. It was also shown that the resistance of such a platinum nanowire is very sensitive to changes in the surrounding gas medium. This emphasises the suitability of such structures for integration in future sensor devices. Further experiments were carried out to investigate the physical background of the observed domain wall decoration. For this, the positions of the deposited structures were compared with the underlying domain structure. Apart from few exceptions, a symmetric deposition centered at the domain wall was observed. As a starting point for explanation, the separation of electron-hole-pairs by the electrostatic field from polarisation and screening charges is discussed. This process leads to charge carrier accumulation at the domain boundaries, thus enhancing the local chemical reactivity.

Am Beispiel von ferroelektrischen Systemen auf Bismut-Basis (Bismutmolybdat, Bismutwolframat und Bismuttitanat) und von Strontiumbariumniobat werden neue Möglichkeiten zur Synthese solcher Nanopartikel aufgezeigt. Die Integration der Nanopartikel in transparente Nanokompositmaterialien und die Entwicklung neuer Precursoren für die Herstellung von Dünnschichtproben gehen den Untersuchungen zur Anwendung als elektrooptische aktive Materialien voraus. Durch weitere Anwendungsmöglichkeiten in der Photokatalyse, dem Test dampfadsorptiver Eigenschaften mit Hilfe eines neuartigen Adsorptionstesters (Infrasorb) und auch mit Hilfe der Ergebnisse der ferroelektrischen Charakterisierung von gesinterten Probenkörpern aus einem Spark-Plasma-Prozess wird ein gesamtheitlicher Überblick über die vielfältigen Aspekte in der Arbeit mit nanoskaligen, ferroelektrischen Materialien gegeben.

Ferroic materials play an increasingly important role in novel (nano-)electronic applications. Recently, research on domain walls (DWs) received a big boost by the discovery of DW conductivity in bismuth ferrite (BiFeO3 ) and lead zirconate titanate (Pb(Zrx Ti1−x )O3) ferroic thin films. These achievements open a realistic and unique perspective to reproducibly engineer conductive paths and nanocontacts of sub-nanometer dimensions into wide-bandgap materials. The possibility to control and induce conductive DWs in insulating templates is a key step towards future innovative nanoelectronic devices [1]. This work focuses on the investigation of the charge transport along conductive DWs in ferroelectric single crystals. In the first part, the photo-induced electronic DC and AC charge transport along such DWs in lithium niobate (LNO) single crystals is examined. The DC conductivity of the bulk and DWs is investigated locally using piezoresponse force microscopy (PFM) and conductive AFM (c-AFM). It is shown that super-bandgap illumination (λ ≤ 310 nm) in combination with (partially) charged 180° DWs increases the DC conductivity of the DWs up to three orders of magnitude compared to the bulk. The DW conductivity is proportional to the charge of the DW given by its inclination angle α with respect to the polar axis. The latter can be increased by doping the crystal with magnesium (0 to 7 mol %) or reduced by sample annealing. The AC conductivity is investigated locally utilizing nanoimpedance microscopy (NIM) and macroscopic impedance measurements. Again, super-bandgap illumination increases the AC conductivity of the DWs. Frequency-dependent measurements are performed to determine an equivalent circuit describing the domains and DWs in a model system. The mixed conduction model for hopping transport in LNO is used to analyze the frequency-dependent complex permittivity. Both, the AC and DC results are then used to establish a model describing the transport along the conductive DW through the insulating domain matrix material. In the last part, the knowledge obtained for LNO is applied to study DWs in lithium tantalate (LTO), barium titanate (BTO) and barium calcium titanate (BCT) single crystals. Under super-bandgap illumination, conductive DWs are found in LTO and BCT as well, whereas a domain-specific conductivity is observed in BTO.