Les supraconducteurs à base d'oxyde de cuivre ont fait l'objet d'études approfondis mais ils restent toujours au centre de nombreux débats. Après 30 années de recherche, certaines questions scientifiques ont été éclairées, alors que d'autres restent controversées. L'évolution du paramètre d'ordre supraconducteur avec la température et le dopage en est un cas exemplaire. Dans cette thèse nous décrivons notre étude systématique de supraconducteurs à haute temperature critique par Angle Resolved PhotoEmission Spectroscopy (ARPES: Spectroscopie de photoémission résolue en angle) et par ARPES resolué en temps. On a mesuré du Bi2Sr2CaCu2O8+δ avec dopage optimale (c.a.d. montrant la Tc la plus élevé), afin d'explorer la possibilité que une photo-excitation très intense du supraconducteur crée un état avec des paires de Cooper incohérentes et sans aucune densité superfluide. La méthode expérimentale employée nous a permis de mesurer la dynamique des électrons hors équilibre et du gap supraconducteur, en fournissant des informations complémentaires à l'ARPES conventionnelle et aux mesures optiques. Nos données de ARPES résolue en temps sur Bi2Sr2CaCu2O8+δ montrent que une photo-excitation génère un effondrement du gap supraconducteur qui dépend du moment. La relaxation des quasi-particules acquiert une composante rapide à la fluence F de seuil ou le gap s'effondre complètement. La comparaison entre le F_pair et le F_phase spar spectroscopie optique THz résolue en temps suggère que il y aurait un régime de fluence ou les paires de Cooper survivent, mais ne portant plus un courant superfluide.Un autre défi majeur dans la physique des cuprates supraconducteurs à haute température critique (HTSCs) est la compréhension de l'état normale à haute température. Nous presentons aussi un étude ARPES du pseudo-gap proche du point nodale de la surface de Fermi dans le système La2-xBaxCuO4 (LBCO), qui montre un possible lien avec les modulations de densité de charge (stripes). Nos données suggerent que le gap s'ouvre en dessous de la transition LTT-LTO associé à l'apparition des modulations de charge tandis que la fonction spectrale n'est pas affecté par le modulation de la densité de spin. On observe aussi que la structure de bande dans LBCO est rénormalisé avant le "kink" à environs 70 meV. Nous corrélons cette rénormalisation en énergie et moment à l'amollissement du mode d'étirement de la liaison Cu-O. / The superconductors of the copper-oxide family have been matter of extensive investigations and are still subject of fierce debates. After 30 years of research, some issues have been settled, whereas others remain controversial. The evolution of the superconducting order parameter with temperature and doping level is an exemplary case. In this thesis, we report a systematic Time resolved Angle Resolved PhotoEmission Spectroscopy (ARPES) study of the optimally doped Bi2Sr2CaCu2O8+δ to explore the possibility that an intense photoexcitation of the superconductor can generate a state with incoherent copper pairs and no superfluid density. The employed experimental methods allow us to measure the dynamics of non-equilibrium electrons and of the superconducting gap, providing complementary information to conventional ARPES and optical measurement. Our time resolved ARPES data of Bi2Sr2CaCu2O8+δ, report a momentum-dependent collapse of the superconducting gap upon photoexcitation. Interestingly, the QP relaxation develops a faster component at the threshold fluence F_pair where the gap has fully collapsed. The comparison between the F_pair and the F_phase extracted by tr-THz suggested the existence a fluence regime when the Cooper pairs have survived, but without holding superfluid current. A second major challenge in the physics of HTSCs is the poor understanding of the normal phase at high temperature. We also present the ARPES study of the near nodal pseudo-gap in La2-xBaxCuO4 (LBCO) to show a possible link with charge modulation (stripes). Our data show that the near nodal gap open below the LTT-LTO transition, which is linked to the formation of such modulations, instead of the one where spin modulations appear. The data show that the band structure of LBCO is affected by a renormalization setting in prior to the 70 meV kink. We were able to correlate this renormalization of the ARPES data to the region where the Cu-O bond-stretching mode soften, both in energy and momentum space.

Transition-metal oxides (TMOs) display numerous fascinating and complex properties, such as mixed-valency, low dimensionality, lattice distortion, and phase transition, etc. These properties arise from the partially filled d- or f-electron shells of TM cations and are often accompanied by the intriguing interplay between degrees of freedom. To understand the complexity of d-electron TMOs, this thesis is primarily focused on studying their underlying electronic structure using X-ray absorption spectroscopy (XAS), X-ray emission spectroscopy (XES), X-ray photoemission spectroscopy (XPS), and resonant inelastic X-ray scattering (RIXS). The measurements at the O K- and TM L-edges are achieved by taking advantage of high-flux and high-resolution synchrotron radiation light with tunable monochromatic photon energy. Four electronically and structurally distinctive oxides are selected as representative TMOs for investigation in this thesis. To begin with, through a comparative study of WO3 and Na0.67WO3 crystals, the narrowing of the conduction band is observed with Na doping and the core-hole energy shift in the O K-edge XAS process is experimentally determined. Indirect and direct band gaps of photoanode WO3 are measured from the resonant XES with polarization-dependent experimental geometry. The other sodium bronze studied is quasi-one-dimensional β-Na0.33V2O5 polycrystalline film. The film stoichiometry, preferential orientation, and orbital anisotropy are well characterized by a variety of photon and electron techniques and compared to density-functional theory (DFT) calculation. The V 3d orbital splitting of β-Na0.33V2O5 is surveyed by the V L-edge RIXS and compared with isoelectronic β-Sr0.17V2O5 regarding distortions to VO6 octahedra. Furthermore, the complex electronic structure of Mott insulators La1-xLuxVO3 is investigated to understand their spin-orbital phase diagram. The effects of rare-earth size on the O 2p hybridization states and the local crystal field of VO6 octahedron are found to agree with the prediction of DFT calculation and the evolution of crystal structure. The changes of experimental spectra with temperature are associated with Jahn-Teller distortion and orbital ordering due to structural phase transition. Lastly, the band structure and low-energy excitations of spinel MnV2O4 are explored using soft x-ray spectroscopies and theoretical calculations. The presence of Hubbard bands and the mixing between V and Mn 3d states are suggested both experimentally and theoretically.

Solid state approaches to structural properties like diffraction or microscopy techniques often cannot be applied to biomolecular systems, at least not without special postpreparation which often corrupts the desired properties of the pristine systems. In this work the capabilities of synchrotron-based, soft X-ray spectroscopies as an alternative way to unravel structural properties of such systems are tested. To this end, three exemplary systems were investigated each with the focus on another facet and characteristic length scale. The first example are DNA-alkanethiol self-assembled monolayers, also known as DNA microarrays or DNA chips, for which a way to monitor and controllably tune the structural composition on the mesoscopic scale of many thousands of molecules was sought for. The second example focuses on the single-molecule and submolecular scale in metalprotein hybrid compounds with the aim to identify the binding site of metal atoms or ions within protein molecules and the underlying interaction mechanisms. The most fundamental structural scale, the level of single bonds and molecular orbitals, is addressed in the last example where it was tried to elaborate an approach to map the topology of molecular orbitals based upon X-ray absorption properties. This approach was put to the practical test for the characteristic pi*peptide orbitals in protein backbones. For all three investigated examples, spectroscopies using soft X-ray synchrotron radiation were able to extract the desired information, thus confirming that they may grant alternative access to structural properties of soft-matter systems in cases where standard approaches fail. / Klassische Festkörpertechniken zur Strukturuntersuchung, wie Streu- oder Mikroskopiemethoden, können häufig nicht auf Biomolekülsysteme angewandt werden, zumindest nicht ohne spezielle Postpräparation, die die ursprünglichen Eigenschaften dieser Systeme oft verfälscht. In dieser Arbeit soll untersucht werden, inwieweit Röntgenspektroskopien basierend auf Synchrotronstrahlung einen alternativen Zugang zu Struktureigenschaften solcher Systeme bieten. Dazu wurden drei Systeme exemplarisch untersucht, jeweils mit Schwerpunkt auf einen anderen Aspekt und charakteristischen Längenbereich. Für selbstorganisierende DNA-Alkanthiol-Schichten, sogenannte DNA-Chips, wurde nach eine Weg gesucht, ihre strukturelle Zusammensetzung auf der mesoskopischen Ebene vieler tausend Moleküle zu bestimmen und kontrolliert zu modifizieren. Metallisierte Proteinstrukturen wurden auf Einzelmolekül- bzw. submolekularer Ebene untersucht, mit dem Ziel, die Orte der Metallanlagerung innerhalb des Proteins und die zugrundeliegenden Wechselwirkungsmechanismen zu identifizieren. Die unterste strukturelle Ebene, der Bereich einzelne Bindungen und Molekülorbitale, wurde adressiert am Beispiel der pi*peptide Orbitale des Proteinrückrats. Dafür wurde eine Methode zur Kartographierung einzelner Orbitale anhand von Röntgenabsorptionseigentschaften herausgearbeitet und praktisch getestet. In allen drei Fällen konnten Röntgenspektroskopien die nötigen Informationen liefern und damit ihr Potential für Strukturuntersuchungen in weicher Materie unter Beweis stellen.

Perovskite-based photovoltaic is one of the most promising classes of emerging solar cell technologies. This material class combines several advantageous properties, including low exciton binding energy, high charge carrier diffusion length and high optical absorption. Despite these excellent attributes, some challenges remain in perovskite research. Most notably the device stabilities and lifetimes need to be significantly improved in order to push this technology towards commercialization. Defect physics in perovskite photovoltaics has been shown to be a main factor in understanding long-term device instabilities. However, the number of measurement techniques that can track changes in the ionic landscape during device degradation is very limited, as the perovskite layer is buried under charge extraction layers and metallic contacts. In this thesis argon gas-cluster ion beam etching is combined with x-ray and ultraviolet photoelectron spectroscopy to achieve high resolution energetic and compositional depth profiles. In contrast to most layer-to-layer techniques this method can be applied after any operation time of the photovoltaic and therefore nicely investigate potential changes in the defect landscape. In the first part of this thesis, the impact of argon gas-cluster etching on the perovskite structure is investigated in order to identify potential damage that prevents this technique from being viable for perovskite materials. It is found that metallic lead is gradually created and a small preferential etching effect of the organic cations takes place during the depth profiling, but it is demonstrated that the major part of the crystal structure stays intact and that the energetics of the sample remains very stable. Moreover, it is demonstrated that fitting of the obtained ultraviolet photoelectron spectroscopy spectra leads to high resolution energetic and compositional depth profiles, which are suitable to identify potential loss mechanisms in full photovoltaic devices. In the second part, we investigate the increase in device performance of a perovskite photovoltaic during the first subsequent measurements under full illumination, which is a common example of a short-term instability. Ultraviolet photoelectron spectroscopy depth profiles reveal a strong band bending effect appearing after biasing the device which consequently leads to an increase in device open-circuit voltage. Density functional theory simulations link this band bending effect to the accumulation of iodine interstitials at the interface between the perovskite and the electron transport layer. In the final part, long-term degradation of perovskite photovoltaics is studied by investigating the impact of ionic additives on the perovskite active layer, which increases the lifetime of these devices significantly. It is found that most properties of the perovskite layer remain unaffected by the ionic additive, e.g. microstructure, energetic disorder and photoluminescence. Photoelectron spectroscopy depth profiling revealed an accumulation of iodine at the interface towards the electron transport layer, which is significantly reduced in additive-containing samples. Deep-level transient spectroscopy revealed a new mobile defect species in the ionic additive samples and at the same time a reduction of iodine diffusivity.

De nombreux oxydes de métaux de transition (TMOs) possèdent des propriétés physiques complexes (ferroélectricité, magnétisme, supraconductivité à haute Tc ou magnétorésistance colossale). Les différents degrés de liberté (le réseau, la charge, le spin ou l'ordre orbitalaire) interagissent pour donner des phases différentes, très proches en énergie, qui vont former une grande variété d'états fondamentaux accessibles. La possibilité de fabriquer des hétérostructures de TMOs a encore accru la complexité de ces systèmes, de nouveaux phénomènes apparaissant aux interfaces. Un exemple typique est le gaz d'électrons bidimensionnel (2DEG) créé à l'interface entre deux oxydes isolants, LaAlO3 et SrTiO3, qui montre une transition métal-isolant, du magnétisme ou de la supraconductivité (contrôlée par une tension de grille). Le point de départ de cette thèse a été la découverte d'un 2DEG similaire à la surface nue de SrTiO3 fracturée sous vide, rendant possible l'étude de sa structure électronique par photoémission angulaire.Dans cette thèse, l'étude de surfaces préparées, plutôt que de petites facettes fracturées, a permis l'obtention de données spectroscopiques possédant des largeurs de raie proches des valeurs intrinsèques. Il est alors possible d'étudier les effets à N corps comme la renormalisation de la self-énergie due à l'interaction électron-phonon.Ces recherches sur la structure électronique du 2DEG à la surface de SrTiO3 ont pris un tour nouveau lorsqu'une texture de spin complexe y a été mesurée par photoémission résolue en spin. Nous présentons des résultats qui contredisent ces conclusions et nous discutons des raisons pouvant expliquer ce désaccord.Une des motivations de cette thèse était de savoir si la structure électronique et les propriétés du 2DEG pouvaient être contrôlées. L'étude du 2DEG sur des surfaces (110) et (111) de SrTiO3 révèle que sa structure de bandes (ordre orbitalaire, symétrie de la surface de Fermi, masses effectives) peut être ajustée en confinant les électrons sur des surfaces de différentes orientations du même matériau.Un succès majeure est la mise en évidence de 2DEGs à la surface de nombreux autres TMOs (TiO2-anatase, CaTiO3, BaTiO3) ou d'oxydes plus simples utilisés dans les applications (ZnO). Dans tous ces oxydes, nous avons identifié les lacunes en oxygène comme étant à l'origine de la création des 2DEGs.Dans l'anatase, ou d'autres TMOs en configuration électronique initiale d0, les lacunes en oxygène produisent à la fois des électrons localisés ou itinérants (le 2DEG). Il peut être subtile de prévoir quel est le cas est le plus favorable énergétiquement comme le démontre l'étude de deux polymorphes de TiO2, anatase et rutile. Dans CaTiO3, l’octaèdre formé par les atomes d'oxygène autour du Ti est incliné. Cette rupture de symétrie provoque un mélange des orbitales d et modifie le 2DEG. Dans BaTiO3, la création d'un 2DEG entraîne la coexistence de deux phénomènes normalement incompatibles, la ferroélectricité et la métallicité, dans deux zones spatialement distinctes du même matériau. Ce travail démontre qu'un 2DEG existe aussi à la surface de ZnO qui est, contrairement aux oxydes à base de Ti, plutôt un semiconducteur conventionnel, le caractère des orbitales pour les électrons itinérants étant alors de type s et non de type d.Le principal résultat est la mise au point d'une méthode simple et versatile pour la création de 2DEGs en évaporant de l'aluminium sur des surfaces d'oxydes. Une réaction d'oxydo-réduction entre le métal et l'oxyde permet de créer un 2DEG à l'interface entre le métal oxydé et l'oxyde réduit. Dans cette thèse, les 2DEGs ont été étudiés uniquement par photoémission sous ultra-vide. Cette méthode ouvre la possibilité d'étudier ces 2DEGs dans des conditions de pression ambiante en utilisant, par exemple, des techniques de transport, un pas important vers la production de masse et à bas coûts de 2DEGs dans les oxydes pour de futures applications. / Many transition metal oxides (TMOs) show complex physics, ranging from ferroelectricity to magnetism, high-Tc superconductivity and colossal magnetoresistance. The existence of a variety of ground states often occurs as different degrees of freedom (e.g. lattice, charge, spin, orbital) interact to form different competing phases which are quite similar in energy. The capability to epitaxially grow heterostructures of TMOs increased the complexity even more as new phenomena can emerge at the interface. One typical example is the two-dimensional electron system (2DES) at the interface of two insulating oxides, namely LaAlO3/SrTiO3, which shows metal-to-insulator transitions, magnetism or gate-tunable superconductivity. The origin of this thesis was the discovery of a similar 2DES at the bare surface of SrTiO3 fractured in vacuum, making it possible to study its electronic structure by angle-resolved photoemission spectroscopy (ARPES).In this thesis, the study of well-prepared surfaces, instead of small fractured facets, results in spectroscopic data showing line widths approaching the intrinsic value. This approach allows a detailed analysis of many-body phenomena like the renormalization of the self-energy due to electron-phonon interaction.Additionally, the understanding of the electronic structure of the 2DES at the surface of SrTiO3(001) was given an additional turn by the surprising discovery of a complex spin texture measured by spin-ARPES. In this thesis data is presented which contradicts these conclusions and discusses possible reasons for the discrepancy.One major motivation of this thesis was the question if and how the electronic structure and the properties of the 2DES can be changed or controlled. In this context, the study of 2DESs at (110) and (111) surface revealed that the electronic band structure of the 2DES (orbital ordering, symmetry of the Fermi surface, effective masses) can be tuned by confining the electrons at different surface orientations of the same material, namely SrTiO3.A major achievement of this thesis is the generalization of the existence of a 2DES in SrTiO3 to many other surfaces and interfaces of TMOs (TiO2 anatase, CaTiO3, BaTiO3) and even simpler oxides already used in modern applications (ZnO). In all these oxides, we identify oxygen vacancies as the origin for the creation of the 2DESs.In anatase and other doped d0 TMOs, both localized and itinerant electrons (2DES) can exist due to oxygen vacancies. Which of the two cases is energetically favorable depends on subtle differences as demonstrated by studying two polymorphs of the same material (anatase and rutile).In CaTiO3, the oxygen octahedron around the Ti ion is slightly tilted. This symmetry breaking results in the mixing of different d-orbitals demonstrating again why and how the electronic structure of the 2DES can be altered.In BaTiO3, the creation of a 2DES results in the coexistence of the two, usually mutual exclusive, phenomena of ferroelectricity and metallicity in the same material by spatially separating the two.Moreover, this work demonstrates that the 2DES also exists in ZnO which is - compared to the Ti-based oxides - rather a conventional semiconductor as the orbital character of the itinerant electrons is of s and not d-type.The main result of this thesis is the demonstration of a simple and versatile technique for the creation of 2DESs by evaporating Al on oxide surfaces. A redox reaction between metal and oxide results in a 2DES at the interface of the oxidized metal and the reduced oxide. In this thesis the study of such interfacial 2DESs was limited to photoemission studies in ultra high vacuum. However, this technique opens up the possibility to study 2DESs in functional oxides in ambient conditions by e.g. transport techniques, and might be an important step towards cost-efficient mass production of 2DESs in oxides for future applications.

Photochrome Schalter (Photoschalter), wie Diarylethene (DAEs), Dihydropyrole (DHPs), Azobenzole und Spiropyrane sind für die Entwicklung von photoschaltbaren multifunktionalen Geräten interessant. Daher beschäftigt sich ein Großteil dieser Dissertation mit der Untersuchung der grundlegenden elektronischen Eigenschaften von Photoschaltern, u.a. Dipolmoment und Grenzniveaus. Ein besonderer Fokus liegt auf der dynamischen Anpassung der Energienieveaus zwischen den (in)organischen Halbleitern und den Photoschaltern mit externen Stimuli (z. B. Licht, Wärmeenergie). Zuerst werden die elektronischen Änderungen von DAE-Photoschaltern bei Lichtbeleuchtung durch direkt und inverse Photoemissionsspektroskopie und Dichtefunktionaltheorie nachgewiesen. Beispielsweise zeigt das höchste besetzte Molekülorbital (HOMO) von DAE-Dünnfilmen eine Differenz von 800 meV zwischen ihren beiden isomeren Zuständen. Mit diesen lichtgesteuerten Eigenschaften werden dann DAE-Moleküle verwendet, um die elektronische Struktur an Grenzflächen mit organischen und anorganischen Komponenten (z. B. P3HT, N2200, ZnO, ITO) zu modifizieren. Es wird gezeigt, dass DAE-Moleküle bei Lichtbeleuchtung die Energieniveauanordnung an der Grenzfläche um Hunderte von meV dynamisch und reversibel ändern können. Um Erkenntnisse über mehrere stimulationsinduzierte Schaltungen, z. B. Licht und Wärme, zu erhalten, wird hierfür ein Photoschalter Pyridyl-DHP (Py-DHP) vom T-Typ synthetisiert, da Py-DHP mit Licht in eine Richtung geschaltet und mit Wärmebehandlung zurückgeschaltet werden kann. Es hat sich herausgestellt, dass die schaltinduzierten elektronischen Änderungen durch ein Fermi-Level-Pinning aufgrund der Anwesenheit von molekularen Dipolen beeinflusst werden. Diese Studien bieten eine solide Grundlage für die Verwendung von Photoschaltern zur dynamischen Änderung der Energielevelanordnung und werden die Entwicklung verbesserter photoschaltbarer (opto-)elektronischer Geräte unterstützen. / Photochromic switches (photoswitches) such as diarylethenes (DAEs), dihydropyrenes (DHPs), azobenzenes and spiropyrans have attracted increasing interest for the development of photoswitchable multifunctional devices. The present work of this thesis is to investigate the fundamental electronic properties of photoswitches, i.e., dipole moment, and frontier levels. Particular focus is on dynamically tuning the frontier level alignment between the (in)organic semiconductors and photoswitches with external stimuli (e.g., light, heat). First, the electronic changes of DAE photoswitches upon light illumination are evidenced by direct and inverse photoemission spectroscopy together with density functional theory calculations, for example, the highest occupied molecular orbital (HOMO) of DAE thin films exhibits an 800 meV difference between their two isomeric states. With these light-controlled properties, DAE molecules are then employed to modify the electronic structure at interfaces with organic and inorganic components (e.g., P3HT, N2200, ZnO, ITO). It is proved that upon light illumination DAE molecules can indeed dynamically and reversibly switch the interface frontier level alignment by hundreds of meV. To obtain knowledge on multiple stimuli-induced switchings, e.g., light and heat, a T-type photoswitch pyridyl-DHP (Py-DHP) is synthesized for this purpose, since Py-DHP can be switched with light in one direction and switched back with heat treatment. It is found that, the switching-induced electronic changes are impacted by a Fermi level pinning due to the presence of molecular dipoles. These studies provide a solid basis for the use of photoswitches for dynamically manipulating energy level alignment, and will aid the development of improved photoswitchable (opto-)electronic devices.

No description available.

No description available.

<p>Oligo(phenyleneethynylene) (OPE) molecules are a class of fully conjugated aromatic molecules, that attract attention for their application as “molecular wires” in molecular electronic devices. In this thesis work, self-assembled monolayers (SAMs) formed from a variety of OPE derivatives have been studied. The chemical properties, structure, and packing density of the SAMs have been characterized utilizing techniques such as high-resolution X-ray photoemission spectroscopy (HRXPS), near-edge X-ray absorption fine structure spectroscopy (NEXAFS), Infrared reflection absorption spectroscopy (IRRAS), contact angle measurements, and atomic force microscopy (AFM).</p><p>In a first study, three OPE-derivatives, with benzene, naphthalene and anthracene, respectively, inserted into the backbone, and an acetyl-protected thiophenol binding group were found to form SAMs on Au(111) substrates with lower molecular surface densities and larger molecular inclination as the lateral π-system increases.</p><p>In a second study, porphyrin was introduced as the end group to a wire-like molecule such as OPE. The purpose was to obtain well-organized and functionalized surfaces with optical and redox properties. Three porphyrin-functionalized OPEs had different binding groups, an acetyl-protected thiophenol, a benzylic thiol, and a trimethylsilylethynylene group, and were found to form SAMs on gold surfaces with difference in structure and degree of order. The molecules with the acetyl-protected thiophenol binding group were found to form a high quality SAM compared to the other two. This SAM exhibits a well-ordered and densely packed layer.</p><p>This study gives rise to a better understanding of SAM formation of OPE derivatives, and will form a base for further investigations of charge transport properties of these molecular films, which is of interest for applications in molecular electronic devices.</p>

Silizium (Si) wird für eine breite Palette von Anwendungen wie z.B. in Solarzellen, Mikroelektronik, Biochips und so weiter eingesetzt. In dieser Arbeit wurden neue Hybridsysteme aus Si und organischen Molekülen, bezüglich der Oberflächenpassivierung des Halbleiters und der resultierenden elektronischen Eigenschaften untersucht. Insbesondere wurden Methyl-Gruppen (CH3 und CD3), Ethynyl-Derivate (H−C≡C-, CH3−C≡C-, und C6H5−C≡C-), sowie Pyrrol und Thiophen aus Grignardlösungen untersucht. Bezüglich Stabilität und Defektkonzentration konnte gezeigt werden, dass organisch modifizierte Si-Oberflächen eine höhere Stabilität an Luft haben als Standard wasserstoffpassivierte Si-Oberflächen und dabei eine nur geringfügig höhere Defektkonzentration aufweisen. Untersuchungen mit Infrarot Spektroskopischer Ellipsometrie (IRSE) und Synchrotron Röntgen Photoemissions Spektroskopie (SXPS) zeigen, dass die Oxidationsrate für Oberflächen mit CH3-Terminierung stark reduziert ist. In der vorliegenden Arbeit gelang es erstmalig mittels IRSE die charakteristische „Umbrella“-Schwingungsmode zu beobachten und SXPS Messungen zeigten die Spin-Orbit-Aufspaltung der Si 2p Emission für CH3-passivierte Si-Oberflächen. Die CH3-Gruppen besitzen einen hohen Grad von Ordnung auf der Si(111)-Oberfläche. Das Aufbringen von Ethynyl-Derivaten führt zu extrem dünnen polymerisierten Schichten auf Si durch elektrochemische Radikaloxidation der C≡C Dreifachbindung. Diese Schichten sind homogen und haften sehr gut an der Si-Oberfläche. Weiterhin konnte gezeigt werden, dass die Abscheidung von Ethynyl-Derivaten vom Typ des Halogenatoms im Grignard-Precursor abhängig ist, wobei Br im Vergleich zu Cl zu geringeren Rekombinationsgeschwindigkeiten an der Polymer/Si-Grenzfläche führen. Eine Änderung der Austrittsarbeit von bis zu 0.5 eV und der Bandverbiegung von bis zu 0.24 eV wurde nach der Abscheidung dieser Moleküle gemessen. Diese elektronischen Eigenschaften hängen linear vom Oberflächendipol ab. / Organic functionalization of silicon (Si) surfaces has received a tremendous interest in the development of organic/semiconductor hetero-structures for plenty of potential applications from microelectronics, molecular electronics, photovoltaics to bio-applications. In this thesis, tailoring of the electronic properties and passivation properties of such organic hetero-structures have been investigated. Direct grafting of organic layers like methyl groups (CH3 and CD3), ethynyl derivatives (H−C≡C-, CH3−C≡C-, and C6H5−C≡C-), and heterocyclic molecules (pyrrole and thiophene) onto Si(111) surfaces have been performed in a one-step electrochemical process by anodic treatment in Grignard electrolytes. Organically modified Si surfaces show low interface recombination rates as measured by photoluminescence technique and reveal also a much better passivation with respect to stability in ambient air than H-terminated Si surfaces. Grafting of ethynyl derivatives and heterocyclic molecules lead to the formation of ultrathin polymeric layers, where the thickness depends on charge flow applied to the Si electrode, while methyl groups lead to a monolayer on Si(111) surfaces. Only a very small amount of oxidation states of Si has been observed by infrared spectroscopic ellipsometry (IRSE) and synchrotron X-ray photoemission spectroscopy (SXPS). For the first time, IRSE and SXPS measurements reveal the “umbrella” vibrational mode characteristic from methyl groups and a well-defined spin-orbit splitting of the Si 2p core level emission, respectively, in the case of methylated Si(111) surfaces. For all ethynyl derivatives, high-resolution SXPS investigations reveal the incorporation of halogen atoms in the organic layers obtained. Thereby, exchanging Br for Cl in the Grignard compound leads to lower interface recombination rates at the polymer/Si interface. A shift in work function and surface band bending of up to 0.5 and 0.24 eV has been observed, respectively. The electronic properties reveal a linear relation between the work function and the surface dipole.