本文探討研發支出資本化與攤銷之理論，並以國內股票上市公司為實證對象。本研究使用聯立方程式及Almon lag procedure來檢測企業研發投資效益遞延之情形，然後以Feltham and Ohlson（1995）之評價模式，探討研發支出資本化與攤銷後之權益帳面價值與盈餘之特性，並探討研發投資是否為股票報酬之長期風險因素。本研究並以研發強度（研發費用對銷貨凈額比）區分高、低研發強度二組樣本，比較其與研發有關問題。 本文發現如下： (1)研究發展支出效益遞延實現之現象，似乎存續自第三年開始至未來數期（第四、五年）；平均而言，一元之研發投資可於未來4-5年產生2元以上之獲利，高研發強度廠商則有3元以上之獲利；而低研發強度之公司，研發支出獲益則不顯著的於研發初期二年實現。 (2)在股票評價模式中，高研發強度廠商之研發支出採取資本化，對模式解釋能力較高；而低研發比例（強度）廠商之研發支出則採取費用化，「似乎」對模式解釋能力較高。 (3)目前「一般公認會計原則」對於評價模式的解釋，對低研發強度的廠商之解釋能力較高；反之，對高研發強度廠商較不適用。 (4)研發資本存量對市場比率為股票報酬之長期風險因素。 / This study analyzes the theory of capitalization and amortization of R&D expenditures. This study uses the simultaneous equations and Almon lag procedure to examine whether earnings reflect benefits from past R&D expenditures of public firms in Taiwan. Based on asset valuation model generated by Fetham and Ohlson(1995) and Bernard (1995), this study examines the properties of coefficients of parameters of valuation model and explainary power. In addition, this study estimates the R&D capitalization, and tests whether the R&D capitalization is the long risk factor of stock return or not. Moreover, this study groups sample firms into high or low intensity groups by R&D intensity (R&D expenses-to-sales ratio), and compares the above issues of capitalization of R&D expenditures. The major findings of this study follows: (1)Earnings almost reflect realized benefits from R&D, but there are two years time lag. On average, every one N.T. dollar invested in R&D will produce 2 N.T. dollars profits during four or five - years period. In the high R&D intensity group, every one N.T. dollar invested in R&D will produce 3 N.T. dollars profits in future. On the contrary, in the low R&D intensity group, the benefits of R&D outlays are insignificantly reflected in the first two years. (2)The explainary power (Radj2) of valuation model of R&D capitalized in the high R&D intensity group is higher than that of in the low R&D intensity groups. (3)The relevance of stock valuation generated by present GAAPs for the high R&D intensity group is lower than that of the lower R&D intensity group. (4)The R&D capital-to-market values ratio is the long risk factor of stock returns.

Made available in DSpace on 2011-05-04T12:36:13Z (GMT). No. of bitstreams: 0 Previous issue date: 2009 / A pesquisa e o desenvolvimento tecnológico com vistas à inovação contribuíram significativamente para os progressos observados ao longo da últimametade do século XX, influenciando a formação de recursos humanos qualificados e a gestão das instituições de Ciência & Tecnologia. Entretanto, pesquisa, desenvolvimento e inovação são atividades intrinsecamente ligadas. Assim, as políticas de fomento à inovação implicam em apoio à pesquisa técnico-científica e conseqüentemente na manutenção da capacidade técnico-científica das instituições e exige, também, a análise e o constante aperfeiçoamento da gestão da pesquisa e dos programas de fomento à Pesquisa & Desenvolvimento das instituições públicas de pesquisa. Neste sentido, este trabalho se ocupou da análise qualitativa de um programa de apoio às atividades de P&D realizadas pela maior instituição de pesquisa em saúde do país a Fundação Oswaldo Cruz. O objetivo foi a proposição de um modelo de avaliação de bolsas de pesquisa adequado à complexidade organizacional da FIOCRUZ, que sem abrir mão do mérito científico, da produtividade e da eficiência como componentes da avaliação, seja capaz de identificar critérios e indicadores que levem em conta as articulações dos projetos de pesquisa com os objetivos estratégicos da instituição, com as políticas governamentais de estímulo à inovação eo impacto social de suas atividades. Espera-se com o resultado desta proposta contribuir para a efetividade do modelo de gestão de programas de bolsa de P&D na instituição. / The research and technological development with a view to innovation significantly contributed to the progress observed throughout the last half of the twentieth century, influencing the formation of qualified human resources and the management of Science & Technology institutions. However, research, development and innovation are intrinsically linked activities. So, the innovation promotion policies implicate in support to technical -scientific research and consequently in maintenance of technical-scientific capacity of the institutions and also require analysis and a constant improvement of the research management and of Research & Development fomentation programs of research public institutions. In this sense, this work was in charge of the qualitative analysis of a support program to Research & Development activities accomplished by the major health research institution in the country – Oswaldo Cruz Foundation. The aim was the proposition of a research scholarships evaluation model suitable to the organizational complexity of FIOCRUZ , that considering the scientific merit, productivity and efficiency as evaluation components, be capable of identify criteria and indicators which take into account the research projects articulations with the strategic aims of the institution, with governmental policies of incitement to innovation and social impact of its activities. Our hope with the result of this proposal is to contribute to the effectiveness of the Research & Development scholarship programs management model in the institution.

The research performed throughout this dissertation aims at implementing quantitative methods in order to assess economic and technological performances of firms, i.e. it tries to assess the impacts of the determinants of technological activity on the results of this activity. For this purpose, a representative sample of the most important R&D firms in the world is constituted. The micro-economic nature of the analysis, as well as its international dimension are two main features of this research at the empirical level.<p><p>The second chapter illustrates the importance of R&D investments, patenting activities and other measures of technological activities performed by firms over the last 10 years.<p><p>The third chapter describes the main features as well as the construction of the database. The raw data sample consists of comparable detailed micro-level data on 2676 large manufacturing firms from several countries. These firms have reported important R&D expenditures over the period 1980-1994.<p><p>The fourth chapter explores the dynamic structure of the patent-R&D relationship by considering the number of patent applications as a function of present and lagged levels of R&D expenditures. R&D spillovers as well as technological and geographical opportunities are taken into account as additional determinants in order to explain patenting behaviours. The estimates are based on recently developed econometric techniques that deal with the discrete non-negative nature of the dependent patent variable as well as the simultaneity that can arise between the R&D decisions and patenting. The results show evidence of a rather contemporaneous impact of R&D activities on patenting. As far as R&D spillovers are concerned, these externalities have a significantly higher impact on patenting than own R&D. Furthermore, these effects appear to take more time, three years on average, to show up in patents.<p><p>The fifth chapter explores the contribution of own stock of R&D capital to productivity performance of firms. To this end the usual productivity residual methodology is implemented. The empirical section presents a first set of results which replicate the analysis of previous studies and tries to assess the robustness of the findings with regard to the above issues. Then, further results, based on different sub samples of the data set, investigate to what extent the R&D contribution on productivity differs across firms of different industries and geographic areas or between small and large firms and low and high-tech firms. The last section explores more carefully the simultaneity issue. On the whole, the estimates indicate that R&D has a positive impact on productivity performances. Yet, this contribution is far from being homogeneous across the different dimensions of data or according to the various assumptions retained in the productivity model.<p><p>The last empirical chapter goes deeper into the analysis of firms' productivity increases, by considering besides own R&D activities the impact of technological spillovers. The chapter begins by surveying the alternative ways proposed in the literature in order to asses the effect of R&D spillovers on productivity. The main findings reported by some studies at the micro level are then outlined. Then, the framework to formalize technological externalities and other technological determinants is exposed. This framework is based on a positioning of firms into a technological space using their patent distribution across technological fields. The question of whether the externalities generated by the technological and geographic neighbours are different on the recipient's productivity is also addressed by splitting the spillover variable into a local and national component. Then, alternative measures of technological proximity are examined. Some interesting observations emerge from the empirical results. First, the impact of spillovers on productivity increases is positive and much more important than the contribution of own R&D. Second, spillover effects are not the same according to whether they emanate from firms specialized in similar technological fields or firms more distant in the technological space. Finally, the magnitude and direction of these effects are radically different within and between the pillars of the Triad. While European firms do not appear to particularly benefit from both national and international sources of spillovers, US firms are mainly receptive to their national stock and Japanese firms take advantage from the international stock.<p> / Doctorat en sciences économiques, Orientation économie / info:eu-repo/semantics/nonPublished

On the surface, Sweden and Denmark are two similar countries, but behind the closed boardroom doors, things look different. These two countries have chosen different approaches to achieving their goals and the diversification within the boards differs markedly. As a result, the study tries to emphasize the differences, and see if it is possible to distinguish different gender effects. The purpose of the study is to investigate the possible effects of gender quotas in corporate governance and the impact women does have on reducing risk in a corporate governance context as well as their connection to R&amp;D investments based on a performance measure of earnings per share. The study has chosen a deductive approach with regards to a cross-sectional design to make it possible to make various comparisons between the collected variables. The hypotheses of the study have been formulated with help of the theories: tokenism, institutional theory, social role theory, resource mobilization theory, resource-based theory, economic growth theory and the theory of the firm. The study finds gender effects for Denmark however cannot conclude if this is an effect of women on the board of directors or a tokenism problem arising due to males’ dominance causing women to be pushed away or men having a different risk appetite. For Sweden no gender effects can be concluded neither for the 3-year or the year-to-year results. This suggests that Swedish companies board of directors have achieved great synergy effects due to institutional and social pressures, however a tokenism problem cannot be ruled out. / Sverige och Danmark är till ytan två lika länder men bakom de stängda styrelsedörrarna så ser det annorlunda ut. Dessa två länder har valt olika tillvägagångssätt för att uppnå sina mål och diversifieringen inom styrelserna skiljer sig markant. Till följd detta försöker studien betona skillnaderna, samt se om det går att urskilja olika könseffekter. Syftet med studien är att undersöka de möjliga effekterna av könskvotering i bolagsstyrning och vilken inverkan kvinnor har på att minska risken i ett bolagsstyrningssammanhang, samt deras koppling till forskning och utvecklings investeringar baserat på prestationsmått på vinst per aktie. Studien har valt ett deduktivt tillvägagångssätt med avseende på en tvärsnittsdesign för att göra det möjligt att göra olika jämförelser mellan de insamlade variablerna. Studiens hypoteser har formulerats med hjälp av teorierna: tokenism, institutionell teori, social rollteori, resursmobiliseringsteori, resursbaserad teori, ekonomisk tillväxtteori och företagets teori. Studien finner könseffekter för Danmark men kan inte dra slutsatsen om detta är en effekt av kvinnor i styrelsen eller ett tokenismproblem som uppstår på grund av mäns dominans som gör att kvinnor trängs undan eller att män möjligen har en annan riskaptit. För Sverige kan inga könseffekter konstateras varken för 3-års- eller årsresultatet. Detta tyder på att den svenska styrelsen har uppnått stora synergieffekter på grund av institutionella och sociala påtryckningar, men ett tokenismproblem kan inte uteslutas.

Modern Web or ¿Eternal-Beta¿ applications necessitate a flexible and easy-to-use data management platform that allows the evolutionary development of databases and applications. The classical approach of relational database systems following strictly the ACID properties has to be extended by an extensible and easy-to-use persistency layer with specialized DB features. Using the underlying concept of Software as a Service (SaaS) also enables an economic advantage based on the ¿economy of the scale¿, where application and system environments only need to be provided once but can be used by thousands of users. Within this tutorial, we are looking at the current state-of-the-art from different perspectives. We outline foundations and techniques to build database services based on the SaaS-paradigm. We discuss requirements from a programming perspective, show different dimensions in the context of consistency and reliability, and also describe different non-functional properties under the umbrella of Service-Level agreements (SLA).

Malaysia is a transition economic country that aims to be a developed country by 2020. In realising this mission (Vision 2020), the cluster concept has been an interest and adopted by the central authorities. There are few years ahead to reach the targeted year and it interest of this study to investigate the relevant development on its own engineered cluster of the Multimedia Super Corridor (MSC) that was put forward on the success of Silicon Valley in the US. This thesis focuses on the development of the MSC cluster in the Malaysia context. It examines and measures the state of the cluster, the role played by its core actors (from Triple Helix perspective) and their relationship in the MSC. The role of collaboration has been used to measure the relationship among actors with the key determinants of cluster formation. A mixed data collection method was used to answer the research question and objectives involved. A conceptual model for analysing the MSC cluster is proposed, bringing together insights from the literature on clusters, role of actors, collaborative relationship and the complex systems of innovation approach. This conceptual model uncover the weaknesses of social dimension (social infrastructure) in Porter’s diamond model and the general approach of Triple Helix model in the cluster development. The cluster lifecycle model is used to add the depth to the analysis on the condition of cluster development.

Questo lavoro intende analizzare la correlazione tra innovazione delle imprese e capital sociale, misurato da indicatori classici (come la partecipazione politica e le attività nel tempo libero) e da indicatori maggiormente legati alla dimensione aziendale (come accordi e cooperazioni). L’analisi viene fatta sia per l’Italia che per il Regno Unito attraverso l’uso della Community Innovation Survey 4, la survey europea sull’innovazione e la R&S nelle imprese per i dati su innovazione e capital sociale aziendale. Inoltre vengono utilizzate l’Indagine Multiscopo 2000 per l’Italia e l’Indice di Deprivazione per l’Inghilterra come misure di capitale sociale classico. Infine viene proposta una comparazione dei risultati per i due paesi per l’analisi sul capitale sociale aziendale. Questa comparazione è riletta alla luce di più generali considerazioni sui due differenti sistemi produttivi ed economici. / This work would try to test the correlation between innovation in firms and social capital, measured by classic indicators (like political participation, leisure and activities) and more corporate indicators (like agreements and collaborations). The analysis is carried out for Italy and UK and we use the Community Innovation Survey 4, the European survey on innovation and R&D in the firms, for the data on innovation and corporate social capital. We use the Multipurpose Survey 2000 for Italy and the Index of Deprivation for England like measures of classic social capital. We further try a comparison of the results between the two countries for the analysis on corporate social capital. This comparison is finally referred to more general issues like the two different productive and economic systems.

This thesis examines the perceived importance by two-tiered management of Cooperative Research Centres (CRCs) for managing a range of intellectual property issues. Fifty survey items are presented to the executive directors and commercialization managers of 62 CRCs. The survey items are categorized under four themes: relationships with collaborators, project management; design and implementation of agreements; and specific licensing issues. An analysis of the data, using a series of independent samples t-tests, repeated measures t-tests, chi-square tests for independence or relatedness and goodness of fit, shows a range of results. There are significant differences between executive directors and commercialization managers on a number of issues. There are particular emphases or trends about certain issues for the whole sample of managers. These findings are compared with text analyses of 23 CRC strategic planning documents. This is done in order to explore any similarity, difference or nuance between what the managers say in response to the survey items, compared with what is stated in the codified policies of the CRCs. While there is a high degree of consistency among certain themes between the two sets of findings, the overall analysis points to the need for the CRCs to have a better understanding and practice of commercialization opportunities, especially through the involvement of third party commercial interests. It is argued that accommodating third party commercialization interests involves the application of an important knowledge economy principle that has an important bearing on the future economic viability and competitiveness of the CRCs.

During the last two decades, there have been a number of policy and legislative changes in respect of South Africa’s intellectual property (IP) and the national system of innovation (NSI). In 2012, a Ministerial Review of the Science, Technology and Innovation (STI) landscape in South Africa made recommendations to improve the STI landscape and effectively the national system of innovation. The study provides a critical review of drafts of the national IP policy published in 2013 as well as the IP Framework released in 2016 for public comment. The review of the IP and the NSI are within the context of the National Development Plan (NDP), which outlines South Africa’s desired developmental goals. South Africa is part of the BRICS group of countries (Brazil, Russia, India, China and South Africa). The South African economy is characterised by a desire to move away from being dependent on resources and commodities, to becoming a more knowledge based and innovation driven economy. It is hoped that such a move would assist the country to address some of the social and economic development challenges facing South Africa, as captured in the NDP. South Africa has a functioning IP system, but its relationship with South Africa’s development trajectory is not established. More particularly, the extent to which the IP system relates to the innovation system and how these two systems must be aligned to enable South Africa to transition successfully from a country based on the production of primary resources and associated commodity-based industries to a viable knowledge-based economy is unclear. The Trade-related Aspects of Intellectual Property Rights (TRIPS Agreement) of the World Trade Organisation (WTO) provides that IP must contribute to innovation and to transfer of technology and knowledge in a manner that is conducive to social and economic welfare. Certain provisions set out the foundations of intellectual property systems within the context of each member state. This study has thus explored the complex, complementary and sometimes contested relationships between IP and innovation, with particular emphasis on the potential of an intellectual property system to stimulate innovation and foster social and economic development. The study has also analysed the interconnectivity of IP and innovation with other WTO legal instruments, taking into account South Africa’s positioning within the globalised economy and in particular the BRICS group of countries. The research involved a critical review of South Africa’s IP and innovation policies, as well as relevant legislation, instruments, infrastructure, IP and innovation landscape, and relationship with international WTO legal instruments, in addition to its performance, given the developmental priorities and the globalised economy. The research documents patenting trends by South Africans using European Patent Office (EPO), Patent Cooperation Treaty (PCT), United States Patents and Trademarks Office (USPTO) databases over the period 1996-2015. A comparative analysis of patenting trends amongst BRICS group of countries has also been documented. The study also documents new findings, observations and insights regarding South Africa’s IP and innovation systems. Some of these, particularly in relation to higher education and research institutions, are directly attributable to the Intellectual Property Rights from Publicly Financed Research and Development Act. More particularly, the public institutions are becoming relevant players in the NSI and are responsible for growth of certain technology clusters, in particular, biotechnology. At the same time, the study makes findings of a decline of private sector participation in patenting as well as R&D investment over the 20-year period. Recommendations are included regarding specific interventions to ensure coherence between the IP and innovation systems. Such coherence and alignment should strengthen the systems’ ability to stimulate innovation and foster inclusive development and competitiveness, which are relevant for addressing South Africa’s socio-economic development priorities. / Mercantile Law / LL. D.

Research and Development engineering is at the corner stone of humanity’s evolution. It is perceived to be a systematic creative process which ultimately improves the living standard of a society through the creation of new applications and products. The commercial paradigm that governs project selection, resource allocation and market penetration prevails when the focus shifts from pure research to applied research. Furthermore, the road to success through commercialisation is difficult for most inventors, especially in a vast and isolated country such as Australia which is located a long way from wealthy and developed economies. While market leading products are considered unique, the actual process to achieve these products is essentially the same; progressing from an idea, through development to an outcome (if successful). Unfortunately, statistics indicate that only 3% of ‘ideas’ are significantly successful, 4% are moderately successful, and the remainder ‘evaporate’ in that form (Michael Quinn, Chairman, Innovation Capital Associates Pty Ltd). This study demonstrates and analyses two techniques developed by the author which reduce uncertainty in the engineering design and development phase of new product development and therefore increase the probability of a successful outcome. This study expands the existing knowledge of the engineering design and development stage in the new product development process and is couched in the identification of practical methods, which have been successfully used to develop new products by Australian Small Medium Enterprise (SME) Excel Technology Group Pty Ltd (ETG). Process theory is the term most commonly used to describe scientific study that identifies occurrences that result from a specified input state to an output state, thus detailing the process used to achieve an outcome. The thesis identifies relevant material and analyses recognised and established engineering processes utilised in developing new products. The literature identified that case studies are a particularly useful method for supporting problem-solving processes in settings where there are no clear answers or where problems are unstructured, as in New Product Development (NPD). This study describes, defines, and demonstrates the process of new product development within the context of historical product development and a ‘live’ case study associated with an Australian Government START grant awarded to Excel Technology Group in 2004 to assist in the development of an image-based vehicle detection product. This study proposes two techniques which reduce uncertainty and thereby improve the probability of a successful outcome. The first technique provides a predicted project development path or forward engineering plan which transforms the initial ‘fuzzy idea’ into a potential and achievable outcome. This process qualifies the ‘fuzzy idea’ as a potential, rationale or tangible outcome which is within the capability of the organisation. Additionally, this process proposes that a tangible or rationale idea can be deconstructed in reverse engineering process in order to create a forward engineering development plan. A detailed structured forward engineering plan reduces the uncertainty associated with new product development unknowns and therefore contributes to a successful outcome. This is described as the RETRO technique. The study recognises however that this claim requires qualification and proposes a second technique. The second technique proposes that a two dimensional spatial representation which has productivity and consumed resources as its axes, provides an effective means to qualify progress and expediently identify variation from the predicted plan. This spatial representation technique allows a quick response which in itself has a prediction attribute associated with directing the project back onto its predicted path. This process involves a coterminous comparison between the predicted development path and the evolving actual project development path. A consequence of this process is verification of progress or the application of informed, timely and quantified corrective action. This process also identifies the degree of success achieved in the engineering design and development phase of new product development where success is defined as achieving a predicted outcome. This spatial representation technique is referred to as NPD Mapping. The study demonstrates that these are useful techniques which aid SMEs in achieving successful new product outcomes because the technique are easily administered, measure and represent relevant development process related elements and functions, and enable expedient quantified responsive action when the evolving path varies from the predicted path. These techniques go beyond time line representations as represented in GANTT charts and PERT analysis, and represent the base variables of consumed resource and productivity/technical achievement in a manner that facilitates higher level interpretation of time, effort, degree of difficulty, and product complexity in order to facilitate informed decision making. This study presents, describes, analyses and demonstrates an SME focused engineering development technique, developed by the author, that produces a successful new product outcome which begins with a ‘fuzzy idea’ in the mind of the inventor and concludes with a successful new product outcome that is delivered on time and within budget. Further research on a wider range of SME organisations undertaking new product development is recommended.