Le graphène est une simple couche de nid d'abeille motifs atomes de carbone. Il a suscité beaucoup d'intérêt dans la dernière décennie en raison de ses excellentes propriétés électroniques, optiques et mécaniques, etc., et montre larges perspectives d'applications dans le futur. Parfois, les propriétés du graphène doivent être modulées pour s’adapter à des applications spécifiques. Par exemple, le contrôle du niveau de dopage fournit un bon moyen de moduler les propriétés électriques et magnétiques de graphène, qui est important pour la conception de dispositifs de mémoire et de logique à base de graphène. En outre, la possibilité de régler la conductance électrique peut être utilisée pour fabriquer le transistor de graphène, et le dépôt chimique en phase vapeur (CVD) Procédé montre la possibilité d'effectuer la préparation de graphène intégrées dans les processus de fabrication de semi-conducteur. L'injection de spin et l'irradiation sont méthodes efficaces et pratiques pour adapter les propriétés de transport du graphène. Mais en raison du processus de fabrication complexe, il est difficile de préparer le dispositif de transport de spin graphène succès. La lithographie et décoller les processus qui impliquent utilisant résine photosensible va dégénérer les propriétés de transport du graphène. En outre, la sensibilité du graphène aux molécules H2O et O2 lorsqu'il est exposé à l’air ambiant entraînera faible signal de rotation et le bruit de fond. L'irradiation fournit une méthode propre à moduler les propriétés électriques de graphène qui n’impliquent pas de traitement chimique. En ions ou irradiation d'électrons, la structure de bande électronique de graphène peut être réglé et la structure en treillis est modulé aussi bien. En outre, les impuretés chargées et dopage résultant de l'irradiation peuvent modifier les propriétés électroniques du graphène comme la diffusion électron-phonon, libre parcours moyen et la densité de support. Comme indiqué, le graphène oxydation peut être induite par exposition à un plasma d'oxygène, et le N- dopage de graphène par recuit thermique dans de l'ammoniac a été démontré. En outre, la souche dans le graphène peut également être adaptée par irradiation, qui contribue également à la modification des propriétés de transport de graphène. En conclusion, l'irradiation fournit une méthode physique efficace pour moduler les propriétés structurelles et de transport de graphène, qui peuvent être appliqués dans la mémoire à base de graphène et des dispositifs logiques, transistor, et des circuits intégrés. Dans cette thèse, l'irradiation d'ions hélium a été réalisée sur le graphène cultivé sur substrat SiO2 par la méthode CVD, et les propriétés structurelles et de transport ont été étudiés. Le dopage de transfert de charge dans le graphène induite par les résultats d'irradiation dans une modification de ces propriétés, qui suggère une méthode pratique pour les adapter. En outre, l'irradiation par faisceau d'électrons a été effectuée sur graphène cultivé sur substrat de SiC. Les amorphisations progressives, contraintes et d'électrons dopage locales contribuent à la modification des propriétés structurelles et de transport dans le graphène qui peuvent être observés. / Graphene is a single layer of honeycomb patterned carbon atoms. It has attracted much of interest in the past decade due to its excellent electronic, optical, and mechanical properties, etc., and shows broad application prospects in the future. Sometimes the properties of graphene need to be modulated to adapt for specific applications. For example, control of doping level provides a good way to modulate the electrical and magnetic properties of graphene, which is important to the design of graphene-based memory and logic devices. Also, the ability to tune the electrical conductance can be used to fabricate graphene transistor, and the chemical vapor deposition (CVD) method shows the possibility to make the preparation of graphene integrated into semiconductor manufacture processes. Moreover, the sensitivity of graphene to the H2O and O2 molecules when exposed to the air ambient will result in weak spin signal and noise background. Irradiation provides a clean method to modulate the electrical properties of graphene which does not involve chemical treatment. By ion or electron irradiation, the electronic band structure of graphene can be tuned and the lattice structure will be modulated as well. Moreover, the charged impurities and doping arising from irradiation can change the electronic properties of graphene such as electron-phonon scattering, mean free path and carrier density. As reported, graphene oxidization can be induced by exposure to oxygen plasma, and N-Doping of Graphene through thermal annealing in ammonia has been demonstrated. Furthermore, the strain in graphene can also be tailored by irradiation, which also contributes to the modification of transport properties of graphene. In conclusion, irradiation provides an efficient physical method to modulate the structural and transport properties of graphene, which can be applied in the graphene-based memory and logic devices, transistor, and integrated circuits (ICs). In this thesis, Helium ion irradiation was performed on graphene grown on SiO2 substrate by CVD method, and the structural and transport properties were investigated. The charge transfer doping in graphene induced by irradiation results in a modification of these properties, which suggests a convenient method to tailor them. Moreover, electron beam irradiation was performed on graphene grown on SiC substrate. The local progressive amorphization, strain and electron doping contribute to the modification of structural and transport properties in graphene which can be observed.

<p>Clusters are finite ensembles of atoms or molecules with sizes in the nanometer regime (<i>i.e.</i> nanoparticles). This thesis present results on the geometric and electronic structure of homogeneous and heterogeneous combinations of atoms and molecules. The systems have been studied with synchrotron radiation and valence, core and Auger electron spectroscopic techniques.</p><p>The first theme of the thesis is that of mixed clusters. It is shown that by varying the cluster production technique both structures that are close to that predicted by equilibrium considerations can be attained as well as far from equilibrium structures.</p><p>Electronic processes following ionization constitute the second theme. The post-collision interaction phenomenon, energy exchange between the photo- and the Auger electrons, is shown to be different in clusters of argon, krypton and xenon. A model is proposed that takes polarization screening in the final state into account. This result is of general character and should be applicable to the analysis of core level photoelectron and Auger electron spectra of insulating and semi-conducting bulk materials as well.</p><p>Interatomic Coloumbic Decay is a process that can occur in the condensed phases of weakly bonded systems. Results on the time-scale of the process in Ne clusters and mixed Ar/Ne clusters are herein discussed, as well observations of resonant contributions to the process. In analogy to Auger <i>vis-à-vis</i> Resonant Auger it is found that to the ICD process there is a corresponding Resonant ICD process possible. This has later been observed in other systems and by theoretical calculations as well in subsequent works by other groups.</p><p>Delocalization of dicationic valence final states in the hydrogen bonded ammonia clusters and aqueous ammonia has also been investigated by Auger electron spectroscopy. With those results it was possible to assign a previously observed feature in the Auger electron spectrum of solid ammonia.</p>

Abstract : The objectives of this work were to prepare and characterize films of benzylic amide macrocycles and rotaxanes obtained by functionalisation of an acidterminated self-assembled monolayer (SAM) on gold, and thus to probe the aptitude of these surfaces for applications in the field of the nanotechnologies. We initially studied the self-assembled monolayer of 11-mercaptoundecanoic acid and focused on its composition, structure and organization. We show that the molecules of alcanethiol are oriented with the acid group pointing out from the surface. The film is highly ordered with defect density below 0.2%. We investigated the functionalisation process with the covalently bound Mac-OH macrocycle, with the physisorbed Mac-pyridine macrocycle and with the naphtalimide rotaxane. The latter is also anchored to the SAM through a non-covalent interaction. We focused on the comprehension of both quantitative as qualitative characteristics of the films, such as the degree of functionalisation, their stability with respect to external constraints, their order and homogeneity, their structure and their orientation. By combining techniques such as X-ray photoemission spectroscopy, infrared reflection-absorption spectroscopy, atomic force microscopy, electrochemical and contact angle measurements, we demonstrated that the films of macrocycles reach a high degree of functionalisation. The layers are homogeneous and a preferential orientation of the macrocycle molecules with the plan of the ring tilted with respect to the surface and with the alkyl chains pointing-out from the films is observed. In addition, we studied the possibility of using the macrocycle films for molecular recognition, employing the Fc-Gly-Gly molecule as a model target. Through similar experiments and analysis, films of naphtalimide rotaxane were proven to give a good functionalisation of SAM. The molecule adsorbs with a preferential orientation of the linear axis parallel to the surface and the macrocycle unit normal to it. We characterized the fluorescent properties of the molecule due to the naphtalimide group and showed that when adsorbed on a gold substrate the presence of the self-assembled monolayer prevents total quenching. <br> Résumé : Les objectifs de ce travail étaient de caractériser des films de macrocycles et de rotaxanes de type amide benzylique obtenus par la fonctionnalisation de monocouches auto-assemblées d'alcanethiols, ayant un groupe acide terminal, sur une surface d'or, et ainsi de mettre en évidence certaines des potentialités de ces surfaces en vue d'applications éventuelles dans le domaine des nanotechnologies. Nous avons d'abord étudié la monocouche auto-assemblée de l'acide 11-mercaptoundecanoïque et particulièrement les aspects tels que la composition, la structure et l'organisation du film et nous avons mis en évidence que les molécules d'alcanethiol sont orientées dans le film avec le groupe acide vers l'extérieur de la surface, de façon à pouvoir interagir avec les molécules à greffer, et que le degré d'ordre de la monocouche est très élevé, en montrant celle-ci une fraction de défauts inférieure au 0.2% de l'aire totale du film. L'étude de la fonctionnalisation successive avec le macrocycle Mac-OH, lié de façon covalente, et le macrocycle Mac-pyridine ainsi que la rotaxane naphtalimide, ancrés à travers une interaction non-covalente à la monocouche auto-assemblée, a porté une attention particulière à la compréhension d'aspects tels que le degré de recouvrement de la surface, la stabilité vis-à-vis de contraintes externes, l'ordre et l'homogénéité, ainsi que la structure des films et l'orientation des molécules. Grâce à la combinaison de techniques telles que l'XPS, l'IRAS, les techniques électrochimiques, les mesures d'angle de contact et l'AFM, nous avons mis en évidence que les films de macrocycle atteignent un recouvrement élevé et homogène de la monocouche autoassemblée et qu'une orientation des molécules de macrocycle, avec une inclinaison du plan de l'anneau par rapport à la surface et pointant leurs chaînes alkyles vers l'extérieure du film, est observée. Ensuite, nous avons abordé la possibilité d'impliquer les films de macrocycle en tant que récepteurs moléculaires d'une molécule modèle, la Fc-Gly-Gly. Par une caractérisation similaire, les films de la rotaxane naphtalimide ont montré d'atteindre un recouvrement élevé de la surface de la monocouche avec une orientation privilégiée des molécules avec l'axe parallèle et le macrocycle perpendiculaire à la surface pour pouvoir interagir, à travers les fonctions pyridine du macrocycle, avec la monocouche. De plus, nous avons caractérisé les propriétés fluorescentes de la molécule, résidantes dans son groupe naphtalimide, lorsqu'elle est adsorbée sur un substrat métallique, l'or, affectées par la présence de la monocouche auto-assemblée.

Clusters are finite ensembles of atoms or molecules with sizes in the nanometer regime (i.e. nanoparticles). This thesis present results on the geometric and electronic structure of homogeneous and heterogeneous combinations of atoms and molecules. The systems have been studied with synchrotron radiation and valence, core and Auger electron spectroscopic techniques. The first theme of the thesis is that of mixed clusters. It is shown that by varying the cluster production technique both structures that are close to that predicted by equilibrium considerations can be attained as well as far from equilibrium structures. Electronic processes following ionization constitute the second theme. The post-collision interaction phenomenon, energy exchange between the photo- and the Auger electrons, is shown to be different in clusters of argon, krypton and xenon. A model is proposed that takes polarization screening in the final state into account. This result is of general character and should be applicable to the analysis of core level photoelectron and Auger electron spectra of insulating and semi-conducting bulk materials as well. Interatomic Coloumbic Decay is a process that can occur in the condensed phases of weakly bonded systems. Results on the time-scale of the process in Ne clusters and mixed Ar/Ne clusters are herein discussed, as well observations of resonant contributions to the process. In analogy to Auger vis-à-vis Resonant Auger it is found that to the ICD process there is a corresponding Resonant ICD process possible. This has later been observed in other systems and by theoretical calculations as well in subsequent works by other groups. Delocalization of dicationic valence final states in the hydrogen bonded ammonia clusters and aqueous ammonia has also been investigated by Auger electron spectroscopy. With those results it was possible to assign a previously observed feature in the Auger electron spectrum of solid ammonia.

In this thesis we have performed core-electron spectroscopy studies of gas phase molecular systems starting with smaller diatomic, continuing with triatomic and extending our research to more complex polyatomic ones. We can subdivide the results presented here into two categories: the first one focusing on electronic fine structure and effect of the chemical bonds on molecular core-levels and the other one dealing with nuclear dynamics induced by creation of a core hole. In our research we have mostly used synchrotron radiation based techniques such as X-ray Photoelectron (XPS), X-ray Absorption (XAS), normal and Resonant Auger (AES and RAS, respectively) and Energy-Selected Auger Electron PhotoIon COincidence (ES-AEPICO) spectroscopies. We have demonstrated that resonant Auger spectroscopy can be used to aid interpretation of the features observed in XAS for Rydberg structures in the case of Cl2 and C1s−1π*1 states of allene molecules. The combined use of high-resolution spectroscopy with ab initio calculations can help the interpretation of strongly overlapped spectral features and disentangle their complex profiles. This approach enabled us to determine the differences in the lifetimes for core-hole 2p sublevels of Cl2 which are caused by the presence of the chemical bond. We have shown that contribution in terms of the Mulliken population of valence molecular orbitals is a determining factor for resonant enhancement of different final states and fragmentation patterns reached after resonant Auger decays in N2O. We have also performed a systematic study of the dependence of the C1s resonant Auger kinetic energies on the presence of different substituents in CH3X compounds. For the first time we have studied possible isomerization reaction induced by core excitation of acetylacetone. We could observe a new spectral feature in the resonant Auger decay spectra which we interpreted as a signature of core-excitation-induced keto-enol tautomerism.

Chalcogenide glasses have attracted considerable attention due to their infrared transparency, low phonon energy, and high non linear optical properties. They have been explored as promising candidate for optical memories, gratings, switching devices etc. Because of their low phonon energy and high refractive indices, now a days these are used for high efficiency fibre amplifiers. Nevertheless, the availability of amorphous semiconductors in the form of high quality multilayers provides potential applications in the field of micro and optoelectronics. Among amorphous multilayers, chalcogenide multilayers are attractive because of the prominent photoinduced effects. Studies in chalcogenide amorphous multilayer have been directed towards two phenomena. One is photoinduced interdiffusion in short period multilayer systems which finds potential applications in holographic recording and fabrication of phase gratings . The other is photo darkening or photobleaching which is also known in thick films. These multilayers exhibit prominent photoinduced effects, similar to those exhibited by uniform thin films. In spite of its practical usefulness, the mechanism of photoinduced interdiffusion is not properly understood. Since most structural transformations are related to atomic diffusion, understanding of the structural transformation must be based on the diffusion process. The main aim of this thesis is to study the photoinduced diffusion in Sb/As2S3 multilayered films and (As2S3)1-xSbx thin films. In literature, there are reports about the photoinduced interdiffusion in Se/As2S3 and Bi/As2S3 multilayered films, but the mechanisms of photoinduced interdiffusion of these elements are not very clear. Raman scattering and infrared spectroscopy techniques have been used to study the photoinduced interdiffusion in Se/As2S3 and Bi/As2S3 multilayered films by Malyovanik et al. (M. Malyovanik, M. Shiplyak, V. Cheresnya, T. Remeta, S. Ivan, and A. Kikineshi, J. Optoelectron. Adv. Mater. 5, 397 (2003). But many questions remain unanswered. The characteristic spectra of components in the multilayer and those of the diffused layer were rather similar. In the present thesis, photoinduced interdiffusion in Sb/As2S3 multilayered samples are studied by Fourier Transform Infrared spectroscopy (FTIR) at room and low temperature and X-ray photoelectron spectroscopy (XPS). The photoinduced effects in (As2S3)1-xSbx thin films are studied by FTIR, XPS and Raman Spectroscopy. The detailed information about the distribution of electronic states in the absorption edge, localized states and the new bonds formed between the components due to photoinduced interdiffusion elucidated from the above studies will give more insight into the mechanism and kinetics of photoinduced interdiffusion. The thesis consists of seven chapters. References are given at the end of each chapter.

Die vorliegende Arbeit beschäftigt sich mit der Präparation strukturell geordneter Dünnschichtverbindungen der Seltenen Erden Ce und Dy mit den Übergangsmetallen Pd, Rh, und Ni sowie der Untersuchung ihrer kristallinen und elektronischen Struktur. Die Präparation der typischerweise 10 nm starken Dünnschichten erfolgte in-situ durch Aufdampfen der Seltenerdmetalle auf einkristalline Übergangsmetallsubstrate oder alternativ durch Kodeposition der Konstituenten auf einen W(110)-Einkristall, jeweils gefolgt durch kurzzeitiges Tempern bei 400 - 1000 °C zur Einstellung der kristallinen Ordnung. Letztere wurde mittels niederenergetischer Elektronenbeugung (LEED) analysiert und auf der Grundlage einer einfachen kinematischen Theorie ausgewertet. Die Untersuchungen der elektronischen Struktur erfolgten mittels winkelaufgelöster Photoemission (ARPES), teilweise unter Nutzung von Synchrotronstrahlung von BESSY. Schwerpunkt bildete dabei das Verhalten der Valenzbänder als Funktion von Struktur und Zusammensetzung der Dünnschichten unter besonderer Berücksichtigung von Oberflächenphänomenen. Gemessene Energiedispersionen wurden mit Ergebnissen eigens dafür durchgeführter LDA-LCAO-Rechnungen verglichen und beobachtete Energieverschiebungen der Bandschwerpunkte um z.T. mehr als 1 eV im Rahmen eines einfachen Modells auf unvollständige Abschirmung der Photoemissionsendzustände zurückgeführt. / The present thesis deals with preparation of structurally ordered thin-film compounds of the rare-earths Ce and Dy with the transition metals Pd, Rh, and Ni as well as with investigations of their crystalline and electronic structures. Typically 10nm-thick films were grown in-situ by deposition of the rare-earth metals onto single crystalline transition-metal substrates or alternatively by codeposition of both constituents onto a W(110) single crystal. In both cases deposition was followed by short-term annealing at temperatures of 400 - 1000 °C to achieve crystalline order. The latter was analyzed by means of low-energy electron-diffraction (LEED) and evaluated on the basis of a simple kinematic theory. The electronic structure was investigated by means of angle-resolved photoemission (ARPES), partially exploiting synchrotron radiation from BESSY. The studies concentrate mainly on the behavior of the valence bands as a function of structure and composition of the thin films, particularly under consideration of surface phenomena. Measured energy dispersions were compared with results of LDA-LCAO calculations performed in the framework of this thesis. Observed shifts of the energy bands by up to 1 eV are attributed in the light of a simple model to incomplete screening of the photoemission final states.

Heutzutage ist die Entwicklung neuer Technologien stark auf die Miniaturisierung und die Herstellung von Materialien im Nanometer-Bereich und deren Charakterisierung ausgerichtet. Besonders interessant sind Informationen über hergestellte &amp;quot;sandwich&amp;quot; Strukturen betreffs Art und Anzahl der Schichten, Dicke der Schichten und deren chemische Zusammensetzung. Die chemischen Informationen von den Proben sind sowohl nahe der Oberfläche als auch in tiefer liegenden Schichten (vergrabene Schichten) von Interesse. Da die üblichen Tiefenprofilverfahren durch das Auftreten von ionenstrahlinduzierten Probenschädigungen hier versagen, sind zerstörungsfreie Untersuchungen der Probenstruktur von Bedeutung. Winkelaufgelöste Röntgenphotoemissionsspektroskopie (ARXPS) ist eines der Verfahren, die ohne Beschädigung der Schichtstruktur der untersuchten Materialen Informationen über dünne Gebiete der Probe liefert. Die Charakterisierung der Probe basiert auf der Analyse der austretenden Photoelektronen unter verschiedenen Austrittswinkeln, weil damit die effektive Informationstiefe durch Analyse von Photoelektronenstrom aus verschiedenen Tiefen verändert wird. Die Untersuchungstiefe bei diesem Verfahren ist maximal ~10 nm. Aus dem ARXPS-Verfahren ist nur eine indirekte Information zu erhalten. Deshalb braucht man ein Werkzeug, mit dem die untersuchten Proben mit Hilfe von mathematischen Modellen quantitativ beschrieben werden können. In der vorliegenden Doktorarbeit wird gezeigt, dass die ARXPS-Modellrechnung unter bestimmten Voraussetzungen eine sinnvolle Methode zur Analyse von dünnen Barriere-, Oxid- und Segregationsschichtsystemen ist. Die Quantifizierung der ARXPS-Daten ist nur dann erfolgreich, wenn nicht nur der Einfluss der Abklinglänge der Photoelektronen berücksichtigt wird, sondern auch der Einfluss der mittleren Atomvolumina der Matrix in geeigneter Schichten und der korrigierten Empfindlichkeitsfaktoren berücksichtigt wird. Die Anpassung zwischen experimentellen und berechneten Daten verläuft unter Verwendung bestimmter Rand- und Grenzbedingungen durch Anwendung mathematischer Methoden gleichzeitig für alle betrachtete Winkel. Das Verhalten der ARXPS-Modellrechnung wurde unter verschiedenen Bedingungen überprüft. Zu diesem Zweck wurde eine theoretische Struktur simuliert, deren Verhalten (berechnete Schichtdicken, Bedeckungsgrad der Oberfläche mit der Kontamination, chemische Zusammensetzung der Schichten) untersucht wurde hinsichtlich der Einflüsse von verschiedener Dicken, von Rauhigkeiten an der Probeoberfläche, der Art der Kontamination an der Oberfläche die aus der ex situ Präparation resultiert, und der &amp;quot;Qualität&amp;quot; der betrachteten Information während der Quantifizierung (Peak-Fit Prozeduren). Zur Demonstration der Möglichkeiten der Modellrechnung wurden zwei Systeme untersucht. Das erste Schichtsystem Co/Al2O3/Al enthält eine dünne vergrabene Aluminiumoxid-Barriere, die durch Plasma-Oxidation mit Electron Cyclotron Resonance (ECR) bei unterschiedlichen Oxidationszeiten hergestellt wurde. Die Modellierung der Proben mit der ARXPS-Modellrechnung ergibt unterschiedliche Dicken von Al2O3, die mit der Zeit der Oxidation korrelieren. Je größer die Oxidationszeit ist, desto dickere Aluminiumoxidschichten bilden sich. Die Untersuchung der Alterungsprozesse an den ECR-Proben ergibt, dass die Dicke der Aluminiumoxide nicht beeinflusst wurde. Das bestätigt, dass die Co-Schicht erfolgreich Al2O3 vor weiterer Oxidation schützt. Das zweite Beispiel betrifft eine S/Fe Struktur, die während der Wärmebehandlung durch Schwefel-Segregation auf einer Fe(100)-Oberfläche entstanden ist. Mit Hilfe der ARXPS-Modellrechnung kann der Bedeckungsgrad mit dem Schwefel der Fe- Oberfläche berechnet werden. Um die Ergebnisse der Modellierung zu verifizieren, wurden die ausgewählten Strukturen mit anderen Methoden (z.B.: TEM, EELS, XRR) untersucht.

No description available.

Aqueous solutions were studied using photoelectron and Auger spectroscopy, based on synchrotron radiation and a liquid micro-jet setup. By varying the photon energy in photoelectron spectra, we depth profiled an aqueous tetrabutylammonium iodide (TBAI) solution. Assuming uniform angular emission from the core levels, we found that the TBA+ ions were oriented at the surface with the hydrophobic butyl arms sticking into the liquid. We investigated the association between ions and their neighbors in aqueous solutions by studying the electronic decay after core ionization. The (2p)−1 decay of solvated K+ and Ca2+ ions was studied. The main features in the investigated decay spectra corresponded to two-hole final states localized on the ions. The spectra also showed additional features, related to delocalized two-hole final states with vacancies on a cation and a neighboring water molecule. These two processes compete, and by comparing relative intensities and using the known rate for the localized decay, we determined the time-scale for the delocalized process for the two ions. We compared to delocalized electronic decay processes in Na+, Mg2+, and Al3+, and found that they were slower in K+ and Ca2+, due to different internal decay mechanisms of the ions, as well as external differences in the ion-solute distances and interactions. In the O 1s Auger spectra of aqueous metal halide solutions, we observed features related to delocalized two-hole final states with vacancies on a water molecule and a neighboring solvated anion. The relative intensity of these feature indicated that the strength of the interaction between the halide ions and water correlated with ionic size. The delocalized decay was also used to investigate contact ion pair formation in high concentrated potassium halide solutions, but no concrete evidence of contact ion pairs was observed. / Felaktigt tryckt som Digital Comprehensive Summaries of Uppsala Dissertations from the Faculty of Science and Technology 726