Esta tesis muestra una radiografía de las evaluaciones de Historia de España en COU y Bachillerato (a través de los recuerdos de 1523 alumnos entre 1993-2003), y de los protocolos de los exámenes (410 realizados por el profesorado entre 2002-2004), en la CC.AA. de la Región de Murcia. Entre los resultados más relevantes, destacar: la influencia que los aspectos formales de las evaluaciones y los exámenes tienen tanto en los contenidos por los que se les pregunta a los alumnos como en el tipo de aprendizaje que éstos adquieren; la presencia predominante de preguntas que requieren principalmente la memorización de los conocimientos; las relaciones existentes entre los tipos de preguntas y las capacidades cognitivas solicitadas en las pruebas; la evaluación de unos temas de la Historia de España en detrimento de otros; y la influencia que dos referentes como son selectividad y decreto de currículum, tienen en las pruebas estudiadas. / This thesis shows a radiograph of the assessments of History of Spain in COU and Bachillerato (through the memories of 1523 students between 1993-2003), and the protocols of the examinations (410 made by teachers between 2002-2004) in the Autonomous Community of the Region of Murcia. Among the most relevant results, include: the influence of the formal aspects of assessments and examinations have so much in the content for which one asks the students as the type of learning that they acquire, the predominance of questions mainly require the memorization of knowledge, relations between the types of questions and cognitive abilities tests requested and the evaluation of the subjects of the History of Spain at the expense of others, and the influence of two references such as selectivity and Decree of the curriculum, the tests are studied.

No description available.

Cette recherche porte sur le financement public de l’enseignement supérieur au Pérou et ses impacts dans une perspective longitudinale couvant la période 1993-2003. Cette période est importante parce qu’elle a été témoin, dans ce pays, de changements majeurs aux plans du financement public et de la configuration du système d’enseignement supérieur. La recherche consiste principalement dans des analyses secondaires de données pertinentes publiées par des organismes nationaux et internationaux. Les analyses sont structurées à partir d’un schéma d’inputs et outputs. On considère comme inputs les ressources financières et les ressources humaines, lesquelles comprennent les professeurs et les étudiants, et comme outputs les taux de diplomation (efficacité interne) et la demande de diplômés par le marché du travail (efficacité externe). La théorie de la dépendance de ressources sert de cadre pour interpréter les rapports entre le financement public et ses incidences sur les réponses institutionnels et ses conséquences. Dans la période retenue, le financement du secteur public a décru de 32% en raison d’un désengagement progressif de l’État. Une conséquence majeure de la diminution du financement public a été la croissance rapide du secteur privé de l’enseignement supérieur. En effet, alors qu’en 1993 il y avait 24 institutions privées d’enseignement supérieur, il y en avait, en 2003, 46 institutions. La baisse du financement public et la croissance du secteur privé d’enseignement supérieur ont eu des incidences sur la sélectivité des étudiants, sur le statut des professeurs, sur l’implication des universités en recherche et sur les taux de diplomation. Le taux de sélectivité dans le secteur public a augmenté entre 1993 et 2003, alors que ce taux a diminué, dans la même période, dans le secteur privé. Ainsi, le secteur public répond à la diminution du financement en restreignant l’accès à l’enseignement supérieur. Le secteur privé, par contre, diminue sa sélectivité compensant ainsi l’augmentation de la sélectivité dans le secteur public et, par le fait même, augmente sa part de marché. Également, tant dans le secteur public que dans le secteur privé, les professeurs sont engagés principalement sur une base temporaire, ce qui se traduit, particulièrement dans le secteur privé, dans un moindre engagement institutionnel. Enfin, les universités publiques et privées du Pérou font peu de recherche, car elles favorisent, pour balancer leurs budgets, la consultation et les contrats au détriment de la recherche fondamentale. Paradoxalement, alors que, dans le secteur privé, les taux de sélectivité des étudiants diminuent, leurs taux de diplomation augmentent plus que dans le secteur public. Enfin, les formations avec plus d’étudiants inscrits, tant dans le secteur public que privé, sont les moins coûteuses en infrastructure et équipements. Dès lors, la pertinence de la production universitaire devient problématique. Cette recherche révèle que les organisations universitaires, face à un environnement où les ressources financières deviennent de plus en plus rares, développent des stratégies de survie qui peuvent avoir des incidences sur la qualité et la pertinence de l’enseignement supérieur. / This research deals with public financing of higher education in Peru and its impacts in a longitudinal perspective. It covers a ten-year period from 1993 to 2003. This period is important since this country witnessed major changes in public financing of higher education and in the configuration of its higher education system. The research is based mainly in secondary analyses of relevant data published by national as well as international agencies. Analyses are conducted within an input-output scheme. Financial and human resources (professors and students) are considered inputs, and graduation rates (internal effectiveness) and market labour demands as outputs (external effectiveness). Dependency theory is used as framework for the interpretation of the relationships between public financing and institutional responses and its consequences. In the period considered, public financing diminished by 32% resulting from a progressive disengagement of the State. A major consequence of this disengagement was the rapid growth of the private sector of higher education. While in 1993 there were 24 private institutions of higher education, ten years later there were 46 institutions. The decline in public financing and the growth of the private sector of higher education had measurable consequences on selectivity rates, professorial status, research involvement, and graduation rates. Selectivity rates in the period considered increased in public institutions but decreased in the private ones. Thus the public sector reacted to the decline in financing by becoming more selective; the private sector responded to the increase in selectivity in the public sector by decreasing its rates which translates into a higher student market share. Also, in both sectors, professors are hired on a part-time basis which impacts on participation to academic life and on research production. Moreover, universities, both public and private, favoured applied contractual research as a means of gaining alternative funding to compensate for scarce financial resources. Paradoxically, whereas in the private sector selectivity rates diminished in the decade considered, graduation rates increased and so more than in the public sector. Finally, training programs with higher enrolments in both public and private sectors are those which require less investment in infrastructure and equipments without consideration of societal relevancy. This research reveals that higher education organisations which face an environment with diminishing financial resources devise survival strategies which might have a negative impact on the quality and relevance of higher education.

Nitrogen trifluoride (NF3) is frequently used as a source of fluorine in the electronics device manufacturing industry as a dry etchant during plasma assisted etching of silicon wafers, or during the plasma cleaning of chemical vapor deposition chambers. As a result of the electrochemical synthesis procedures in which carbon anodes are used in a fluorine-rich environment, NF3 product streams are frequently contaminated with ppm-amounts of carbon tetrafluoride (CF4). The electronics manufacturing industry, however, requires NF3 of exceptional purity, i.e. so-called VLSI-grade (very large scale integration) NF3, with CF4 concentrations of 20 ppm and below. Due to the close chemical and physical similarities of the two compounds, the removal of CF4 from NF3 has proven to be rather difficult, and current NF3 purification technologies are relatively inefficient. Although membrane gas separation has proven to be competitive in terms of operating costs and energy efficiency, its use for the purification of NF3 seems to have remained unexplored to date. In this study, the use of high free volume glassy perfluoropolymers of Teflon AF2400, Teflon AF1600, and Hyflon AD60 was therefore investigated. To be able to measure the pure and mixed gas permeabilities and selectivities of the solution-cast membranes towards NF3 and CF4, a custom built experimental setup was used, in which a newly developed gas chromatographic (GC) analysis method was implemented. Using divinylbenzene-styrene co-polymer stationary phases in the form of Super Q, a reliable quantification of mixtures of NF3 and CF4 were achieved without requiring additional fluorocarbon liquid stationary phases, as is commonly used in NF3 production environments. Furthermore, by implementing a dual-channel configuration it was possible to quantify a wide range of NF3 and CF4 concentrations. Using the newly developed technique, NF3 and CF4 concentrations of ca. 1 mol% and upwards could be quantified using a Thermal Conductivity Detector (TCD) on one channel, and NF3 and CF4 concentrations of between ca. 40 vppm and 4000 vppm could be measured using a Pulsed Discharge Helium Ionisation Detector (PDHID) on the second channel of the GC method. The glassy perfluoropolymer membranes of Teflon AF2400, Teflon AF1600, and Hyflon AD60 were prepared by a solution casting method, and it was found that annealing at sufficiently high temperatures (170 – 200 °C) ensured optimum permeability selectivity. In contrast, thermal analysis of the solution-cast Hyflon AD60 membranes that were heated to only 95 °C confirmed that the polymer matrix was significantly swollen due to a residual amount of the casting solvent. Consequently, considerably reduced selectivity and increased permeability of both NF3 and CF4 were observed for such solvent-swollen Hyflon AD60 membranes in comparison with the non-swollen membranes that were annealed at 170 °C. Nonetheless, the measured He/N2 permeability and permeability selectivity of all the membranes studied compared favourably with literature values, and selectively permeated NF3 rather than CF4 wherein the pure and mixed gas permeability selectivity displayed a clear dependence on the fractional free volume (FFV) of the polymer matrices. Thus, in accordance with the decreasing FFV of the perfluoropolymers in the order Teflon AF2400 > Teflon AF1600 > Hyflon AD60, the NF3 permeability decreased from 227 Barrer for Teflon AF2400, to 29 Barrer for Teflon AF1600, to 1.9 Barrer for Hyflon AD60. In contrast, the NF3/CF4 selectivity, α(NF3/CF4), increased inversely from 4.5 for Teflon AF2400, to 6.0 for Teflon AF1600, to the highest selectivity of 12 which was obtained using Hyflon AD60. To elucidate the mechanism of separation, the transport properties of NF3 and CF4 in Teflon AF2400 and Teflon AF1600 w.r.t. diffusion and solubility were studied using Molecular Dynamics (MD), Grand Canonical Monte Carlo (GCMC), and statistical thermodynamic techniques. The results indicated that NF3/CF4 diffusion selectivity (DNF3/DCF4) was favoured by the lower free volume of Teflon AF1600, whereas poor correlation was achieved between the GCMC calculated sorption isotherms of CF4 and the experimentally determined isotherms as reported in the literature. Consequently, the non-equilibrium lattice fluid (NELF) model, which more accurately described the sorption isotherms of CF4, was used to evaluate the solubility selectivity. It was found that by adjusting the NELF model interaction parameter, Ψ, favourable NF3/CF4 solubility selectivities (SNF3/SCF4) were predicted. Furthermore, by combining the solubility selectivity values with the diffusion selectivities calculated from the MD results, permeability selectivity predictions that correlated well with the experimentally determined values were obtained. Based on a semi-quantitative technological evaluation, it was concluded that although good NF3/CF4 mixed gas permeability selectivity was obtained with Hyflon AD60, further research into improving the NF3 solubility, and hence permeability will aid in the development of an efficient membrane gas separation process for the purification of NF3. / PhD (Chemistry),North-West University, Potchefstroom Campus, 2013.

Nitrogen trifluoride (NF3) is frequently used as a source of fluorine in the electronics device manufacturing industry as a dry etchant during plasma assisted etching of silicon wafers, or during the plasma cleaning of chemical vapor deposition chambers. As a result of the electrochemical synthesis procedures in which carbon anodes are used in a fluorine-rich environment, NF3 product streams are frequently contaminated with ppm-amounts of carbon tetrafluoride (CF4). The electronics manufacturing industry, however, requires NF3 of exceptional purity, i.e. so-called VLSI-grade (very large scale integration) NF3, with CF4 concentrations of 20 ppm and below. Due to the close chemical and physical similarities of the two compounds, the removal of CF4 from NF3 has proven to be rather difficult, and current NF3 purification technologies are relatively inefficient. Although membrane gas separation has proven to be competitive in terms of operating costs and energy efficiency, its use for the purification of NF3 seems to have remained unexplored to date. In this study, the use of high free volume glassy perfluoropolymers of Teflon AF2400, Teflon AF1600, and Hyflon AD60 was therefore investigated. To be able to measure the pure and mixed gas permeabilities and selectivities of the solution-cast membranes towards NF3 and CF4, a custom built experimental setup was used, in which a newly developed gas chromatographic (GC) analysis method was implemented. Using divinylbenzene-styrene co-polymer stationary phases in the form of Super Q, a reliable quantification of mixtures of NF3 and CF4 were achieved without requiring additional fluorocarbon liquid stationary phases, as is commonly used in NF3 production environments. Furthermore, by implementing a dual-channel configuration it was possible to quantify a wide range of NF3 and CF4 concentrations. Using the newly developed technique, NF3 and CF4 concentrations of ca. 1 mol% and upwards could be quantified using a Thermal Conductivity Detector (TCD) on one channel, and NF3 and CF4 concentrations of between ca. 40 vppm and 4000 vppm could be measured using a Pulsed Discharge Helium Ionisation Detector (PDHID) on the second channel of the GC method. The glassy perfluoropolymer membranes of Teflon AF2400, Teflon AF1600, and Hyflon AD60 were prepared by a solution casting method, and it was found that annealing at sufficiently high temperatures (170 – 200 °C) ensured optimum permeability selectivity. In contrast, thermal analysis of the solution-cast Hyflon AD60 membranes that were heated to only 95 °C confirmed that the polymer matrix was significantly swollen due to a residual amount of the casting solvent. Consequently, considerably reduced selectivity and increased permeability of both NF3 and CF4 were observed for such solvent-swollen Hyflon AD60 membranes in comparison with the non-swollen membranes that were annealed at 170 °C. Nonetheless, the measured He/N2 permeability and permeability selectivity of all the membranes studied compared favourably with literature values, and selectively permeated NF3 rather than CF4 wherein the pure and mixed gas permeability selectivity displayed a clear dependence on the fractional free volume (FFV) of the polymer matrices. Thus, in accordance with the decreasing FFV of the perfluoropolymers in the order Teflon AF2400 > Teflon AF1600 > Hyflon AD60, the NF3 permeability decreased from 227 Barrer for Teflon AF2400, to 29 Barrer for Teflon AF1600, to 1.9 Barrer for Hyflon AD60. In contrast, the NF3/CF4 selectivity, α(NF3/CF4), increased inversely from 4.5 for Teflon AF2400, to 6.0 for Teflon AF1600, to the highest selectivity of 12 which was obtained using Hyflon AD60. To elucidate the mechanism of separation, the transport properties of NF3 and CF4 in Teflon AF2400 and Teflon AF1600 w.r.t. diffusion and solubility were studied using Molecular Dynamics (MD), Grand Canonical Monte Carlo (GCMC), and statistical thermodynamic techniques. The results indicated that NF3/CF4 diffusion selectivity (DNF3/DCF4) was favoured by the lower free volume of Teflon AF1600, whereas poor correlation was achieved between the GCMC calculated sorption isotherms of CF4 and the experimentally determined isotherms as reported in the literature. Consequently, the non-equilibrium lattice fluid (NELF) model, which more accurately described the sorption isotherms of CF4, was used to evaluate the solubility selectivity. It was found that by adjusting the NELF model interaction parameter, Ψ, favourable NF3/CF4 solubility selectivities (SNF3/SCF4) were predicted. Furthermore, by combining the solubility selectivity values with the diffusion selectivities calculated from the MD results, permeability selectivity predictions that correlated well with the experimentally determined values were obtained. Based on a semi-quantitative technological evaluation, it was concluded that although good NF3/CF4 mixed gas permeability selectivity was obtained with Hyflon AD60, further research into improving the NF3 solubility, and hence permeability will aid in the development of an efficient membrane gas separation process for the purification of NF3. / PhD (Chemistry),North-West University, Potchefstroom Campus, 2013.

La tesi si incentra sulle questioni legate alla distribuzione degli aiuti multilaterali allo sviluppo; in particolare due temi sono affrontati: la selettività degli aiuti e la qualità della governance. L’elaborato si basa sulla letteratura concernente l’efficacia e la distribuzione degli aiuti ed unisce quest’ultima alla letteratura sulla political economy delle organizzazioni internazionali e sulla good governance. Attraverso un’analisi econometrica si intende capire se le organizzazioni multilaterali hanno a cuore la qualità della governance del paese ricevente al momento dell’allocazione degli aiuti. Con un modello GMM-Diff che adopera sia strumenti interni che esterni, si evidenzia come l’interesse per la governance da parte delle istituzioni multilaterali non sia solo retorica, come invece appare da uno studio preliminare. Inoltre, attraverso l’analisi di un panel a tre dimensioni, la tesi monitora l’applicazione della selettività degli aiuti. Viene rigettata l’ipotesi di un aumento della selettività e si evidenziano margini per un miglioramento dell’efficacia allocativa degli aiuti. Le agenzie multilaterali devono cercare di distribuire gli aiuti con criteri diversi da quelli di natura geopolitica. / The thesis examines the allocation of multilateral aid flows with respect to two current issues of the development agenda: the selectivity of aid and the quality of governance. The dissertation brings together three strands of the relevant literature: firstly, the reference literature relating to aid effectiveness and aid allocation, which is then followed by the literature on good governance and, lastly, on the political economy of international organizations. We carry out an econometric study to understand whether international organizations care about the recipients’ performance on governance. With a GMM-Diff methodology using both internal and external instruments we show that the focus on governance by multilateral bodies is not only rhetoric, as it appears at first glance. Moreover, we explore how the selectivity of multilateral aid varies over time by employing a three-dimensional panel. Our analysis rejects the hypothesis of increasing selectivity and confirms that there is room to improve on the allocation of aid. Multilateral institutions need to strengthen their efforts to allocate aid on criteria other than political-strategic ones.

About 8 tons of dry undigested solid waste is generated by the MixAlco process for every 40 tons of food residue waste fed into the process. This MixAlco process produces liquid fuels and the sludge generated can be further converted into synthesis gas using the process of pyrolysis. The hydrogen component of the product synthesis gas may be separated by pressure swing adsorption and used in the hydrogenation of ketones into fuels and chemicals. The synthesis gas may also be catalytically converted into liquid fuels via the Fischer-Tropsch synthesis process. The auger-type pyrolyzer was operated at a temperature between 630-770 degrees C and at feed rates in the range of 280-374 g/minute. The response surface statistical method was used to obtain the highest syngas composition of 43.9 +/- 3.36 v % H2/33.3 +/- 3.29 v % CO at 740 degrees C. The CH4 concentration was 20.3 +/- 2.99 v %. For every ton of sludge pyrolyzed, 5,990 g H2 (719.3 MJ), 65,000 g CO (660 MJ) and 21,170 g CH4 (1055.4 MJ) were projected to be produced at optimum condition. At all temperatures, the sum of the energies of the products was greater than the electrical energy needed to sustain the process, making it energy neutral. To generate internal H2 for the MixAlco process, a method was developed to efficiently separate H2 using pressure swing adsorption (PSA) from the synthesis gas, with activated carbon and molecular sieve 5A as adsorbents. The H2 can be used to hydrogenate ketones generated from the MixAlco process to more liquid fuels. Breakthrough curves, cycle mass balances and cycle bed productivities (CBP) were used to determine the maximum hydrogen CBP using different adsorbent amounts at a synthesis gas feed rate of 10 standard lpm and pressure of 118 atm. A 99.9 % H2 purity was obtained. After a maximum CBP of 66 % was obtained further increases in % recovery led to a decrease in CBP. The synthesis gas can also be catalytically converted into liquid fuels by the Fischer-Tropsch synthesis (FTS) process. A Co-SiO2/Mo-Pd-Pt-ZSM-5 catalyst with a metal-metal-acid functionality was synthesized with the aim of increasing the selectivity of JP-8 (C10-C17) fuel range. The specific surface areas of the two catalysts were characterized using the BET technique. The electron probe microanalyzer (with WDS and EDS capabilities) was then used to confirm the presence of the applied metals Co, Mo, Pd and Pt on the respective supports. In addition to the gasoline (C4-C12) also produced, the synthesis gas H2:CO ratio was also adjusted to 1.90 for optimum cobalt performance in an enhanced FTS process. At 10 atm (150 psig) and 250 degrees C, the conventional FTS catalyst Co-SiO2 produced fuels rich in hydrocarbons within the gasoline carbon number range. At the same conditions the Co-SiO2-Mo-Pd-Pt/HZSM-5 catalyst increased the selectivity of JP-8. When Co-SiO2/Mo-Pd-Pt-HZSM-5 was used at 13.6 atm (200 psig) and 250 degrees C, a further increase in the selectivity of JP-8 and to some extent diesel was observed. The relative amounts of olefins and n-paraffins decreased with the products distribution shifting more towards the production of isomers.

La pesca d'arrossegament practicada al mar Mediterrani incideix sobre un rang batimètric molt ampli i afecta a nombrosos tipus de fons que presenten comunitats molt diversificades, on les espècies de peixos, crustacis, cefalòpodes, altres mol·luscs, equinoderms i d'altres macroorganismes epibentònics interaccionen entre si. D'aquí la importància de caracteritzar amb una aproximació multiespecífica els fons explotats, com la que aquí hem dut a terme, prenent en consideració no tan sols les espècies d'interès comercial sinó totes les espècies que conformen la comunitat. Els objectius concrets d'aquesta tesi estan centrats en l'estudi qualitatiu i quantitatiu dels descartaments produïts per la pesca d'arrossegament que efectua la flota espanyola en la zona del Golf de Lleó, i en aspectes relacionats a millorar la selectivitat de les xarxes emprades canviant el disseny de la malla tradicional per malla quadrada.El mostreig s'ha dut a terme a bord d'una embarcació d'arrossegament comercial, amb una freqüència setmanal, dins el període comprès entre març del 1998 i març del 2000. En total s'han analitzat 68 pesques. Totes les mostres estudiades provenen del primer vol del dia i s'han capturat a fondàries entre 50 i 500 metres.De tot el volum capturat durant l'estudi s'han identificat un total de 307 espècies pertanyent a diversos grups taxonòmics. El grup taxonòmic majoritari és el dels peixos amb 133 espècies, seguit dels crustacis, els cefalòpodes, els equinoderms i finalment el grup d'altres invertebrats. L'espècie més capturada en nombre a la pesquera del Golf de Lleó ha estat la cervellina (Leptometra phalangium) i les més capturades en biomassa han estat la sardina (Sardina pilchardus) i el lluç mediterrani (Merluccius merluccius smiridus).Pel total de la captura la fracció descartada en nombre d'individus representa el 71% mentre que la biomassa descartada és de l'ordre del 36%. La causa més important en quant a quantitat de rebuig produït és la que respon al compliment de la normativa vigent, ja sigui per les talles mínimes legals o per les captures acompanyants permeses. Els majors descartaments estacionals en termes d'abundància es donen a la primavera i l'estiu, coincidint amb l'època de reclutament de la majoria de les espècies explotades. En canvi, els descartaments estacionals en termes de biomassa són excepcionalment elevats a l'estiu i estan provocats per la captura massiva de sardina (S. pilchardus) durant aquesta època de l'any. El rebuig expressat tant en nombre com en pes disminueix en funció de l'estrat de fondària, essent la quantitat descartada major en l'estrat A (50-200 m) i menor en l'estrat C (>400 m).S'ha comprovat que el disseny de malla quadrada aplicat al cóp de les xarxes d'arrossegament fa augmentar dràsticament, tant en nombre com en pes, el percentatge d'individus escapats, disminuint a la vegada la quantitat de descartament. També s'aconsegueix un augment de la mida de primera captura (L50) de totes les espècies excepte en la bruixa de quatre taques (Lepidorhombus boscii). A més es redueix l'impacte de la pesca sobre els estocs d'individus juvenils, sobretot d'espècies que presenten una secció de cos rodona com el lluç mediterrani (M. merluccius smiridus) i el verat (Scomber scombrus), disminuint així la sobrepesca de creixement i de reclutament al mateix temps que s'assegura i es millora la venda d'exemplars de mida legal. / Multispecies Mediterranean trawl fisheries are carried out in a wide range of depths and affect different bottoms and communities. The demersal resources distributed in the trawl fishing grounds off the south-western Gulf of Lions were studied. The aim of this study is to evaluate qualitatively and quantitatively the amount of discards associated to demersal trawl fisheries in this area and to improve the selectivity of bottom trawl nets introducing square mesh codends. A weekly sampling was conducted with a chartered commercial trawler (length 23 m; 600 HP) between march 1998 to march 2000. All the samples took place during daylight at depths ranging between 50 and 500 m. A total of 68 hauls were analyzed and 307 species were identified. The main taxonomic group are fishes with 133 species followed by crustaceans, cephalopods, echinoderm and other invertebrates. Leptometra phalangium is the most abundant species in number of individuals and Sardina pilchardus and Merluccius merluccius smiridus are the most abundant in biomass.From the total catch discards represented 71% in number of individuals and 36% in biomass. The main reason to discard is the compliance with current legislation in relation to minimum landing size and TAC's.Seasonal discards were important in number of individuals during spring due to recruitment of some commercial species. In summer, large amounts of Sardina pilchardus were discarded due to legal regulations that established TAC's to small pelagic species.Discards decreased with depth. We obtain majors discards in the continental shelf and less in the slope.We realized that square mesh design in codends is better than diamond mesh design. The percentage of individuals and biomass escaped increase in square mesh codends and the fraction discarded decrease. The estimated fifty percent retention length (L50) and selection factors were higher for square mesh codends than diamond mesh codends in the most cases except for Lepidorhombus boscii. Also the L50 obtained with square mesh codends are very close to or coincide with the legal size for the majority of the species studied. This results may be explained by the different body shapes and behaviour of the individuals species. We have observed that square mesh codends contribute to reduce the impact of fisheries in immature and undersized individuals from the stock, especially in species with a round shape body like Merluccius merluccius smiridus and Scomber scombrus. Moreover, the square mesh codends assured that landings are made up of marketable lengths.

Nous avons étudié les mécanismes d’interaction entre le piège du fourmilion, une dépression conique dans le sable, et ses proies. Nous avons identifié un spectre optimal de proies, pesant environ 2 à 3 mg, par une expérience d’écologie comportementale sur des fourmis. Les proies plus petites et plus grosses sont moins capturées, pour des raisons différentes. Nous avons également découvert que la compacité du milieu granulaire où les fourmilions construisent influence la probabilité de capture. Le piège garde donc en mémoire l’état du milieu, avec des conséquences sur l’alimentation du prédateur. / We studied the interactions between an antlion pit, a conical depression in sand, and its prey. We identified an optimal range of prey size with a behavioural ecology experiment with ants. Prey that are lighter or heavier are less captured, for different causes, than prey of around 2 and 3 mg. We also found that the compaction of the granular medium where antlion built impacts on the probability of capture of prey. The pit so has a memory of the initial state of the immediate soil environment, with consequences for the predator success.

No description available.