Global ETD Search

101	Fluid dynamic assessments of spiral flow induced by vascular grafts Kokkalis, Efstratios January 2014 (has links) Peripheral vascular grafts are used for the treatment of peripheral arterial disease and arteriovenous grafts for vascular access in end stage renal disease. The development of neo-intimal hyperplasia and thrombosis in the distal anastomosis remains the main reason for occlusion in that region. The local haemodynamics produced by a graft in the host vessel is believed to significantly affect endothelial function. Single spiral flow is a normal feature in medium and large sized vessels and it is induced by the anatomical structure and physiological function of the cardiovascular system. Grafts designed to generate a single spiral flow in the distal anastomosis have been introduced in clinical practice and are known as spiral grafts. In this work, spiral peripheral vascular and arteriovenous grafts were compared with conventional grafts using ultrasound and computational methods to identify their haemodynamic differences. Vascular-graft flow phantoms were developed to house the grafts in different surgical configurations. Mimicking components, with appropriate acoustic properties, were chosen to minimise ultrasound beam refraction and distortion. A dual-beam two-dimensional vector Doppler technique was developed to visualise and quantify vortical structures downstream of each graft outflow in the cross-flow direction. Vorticity mapping and measurements of circulation were acquired based on the vector Doppler data. The flow within the vascular-graft models was simulated with computed tomography based image-guided modelling for further understanding of secondary flow motions and comparison with the experimental results. The computational assessments provided a three-dimensional velocity field in the lumen of the models allowing a range of fluid dynamic parameters to be predicted. Single- or double-spiral flow patterns consisting of a dominant and a smaller vortex were detected in the outflow of the spiral grafts. A double- triple- or tetra-spiral flow pattern was found in the outflow of the conventional graft, depending on model configuration and Reynolds number. These multiple-spiral patterns were associated with increased flow stagnation, separation and instability, which are known to be detrimental for endothelial behaviour. Increased in-plane mixing and wall shear stress, which are considered atheroprotective in normal vessels, were found in the outflow of the spiral devices. The results from the experimental approach were in agreement with those from the computational approach. This study applied ultrasound and computational methods to vascular-graft phantoms in order to characterise the flow field induced by spiral and conventional peripheral vascular and arteriovenous grafts. The results suggest that spiral grafts are associated with advanced local haemodynamics that may protect endothelial function and thereby may prevent their outflow anastomosis from neo-intimal hyperplasia and thrombosis. Consequently this work supports the hypothesis that spiral grafts may decrease outflow stenosis and hence improve patency rates in patients. 617.4
102	Magnetic and Magneto-Transport Properties of Hard Magnetic Thin Film Systems Matthes, Patrick 21 December 2015 (has links) The present thesis is about the investigation of ferromagnetic thin film systems with respect to exchange coupling, magnetization reversal behavior and effects appearing in magnetic heterostructures, namely the exchange bias and the giant magnetoresistance effect. For this purpose, DC magnetron sputtered thin films and multilayers with perpendicular magnetic anisotropy were prepared on single crystalline and rigid as well as flexible amorphous substrates. The first part concentrates on magnetic data storage applications based on the combination of the concept of bit patterned media and three dimensional magnetic memory, consisting of at least two exchange decoupled ferromagnetic storage layers. Here, [Co/Pt] multilayers, revealing different magnetic anisotropies, have been applied as storage layers and as spacer material Pt and Ru was employed. By the characterization of the magnetization reversal behavior the exchange coupling in dependence of the spacer layer thickness was studied. Furthermore, with regard to the concept of bit patterned media, the layers were also grown on self-assembled silica particles, leading to an exchange decoupled single-domain magnetic dot array, which was studied by magnetic force microscope imaging and angular dependent magneto-optic Kerr effect magnetometry to evaluate the reversal mechanism and its dependence on the array dimensions, mainly the diameter of the silica particles and layer thicknesses. To complete the study, micromagnetic simulations were performed to access smaller dimensions and to investigate the dependence of intralayer as well as interlayer coupling on the magnetization reversal of the dot array with multiple storage layers. The second part focuses on the investigation of the giant magnetoresistance effect in systems with perpendicular magnetic anisotropy, where L10 -chemically ordered FePt alloys and [Co/Pt] as well as [Co/Pd] multilayers were utilized. In case of FePt, where high temperatures during the deposition are necessary to induce the chemical ordering, diffusion and alloying of the spacer material often prevent a sufficient exchange decoupling of the ferromagnetic layers. However, with Ru as spacer material a giant magnetoresistance effect could be achieved. Large improvements of the magnetoresistive behavior of such trilayer structures are presented for [Co/Pt] and [Co/Pd] multilayers, which can be deposited at room temperature not limiting the choice of spacer as well as substrate material. Furthermore, in systems consisting of one ferromagnet with perpendicular magnetic anisotropy and one ferromagnet with in-plane magnetic easy axis, a linear and almost hysteresis-free field dependence of the electrical resistance was observed and the behavior for various thickness series has been intensively studied. Finally, the corrosion resistance in dependence of the capping layer material as well as the magnetoresistance of a strained flexible pseudo-spin-valve structure is presented. In addition, in chapter 2.5.2 an experimental study of an improved crystal growth of FePt at comparable low temperatures by molecular beam epitaxy and further promoted by a surfactant mediated growth using Sb is shown. Auger electron spectroscopy as well as Rutherford backscattering spectrometry were carried out to confirm the surface segregation of Sb and magnetic characterization revealed an increase of magnetic anisotropy in comparison to reference layers without Sb. / Die vorliegende Dissertation beschäftigt sich mit der Untersuchung ferromagnetischer Dünnschichtsysteme im Hinblick auf die Austauchkopplung, das Ummagnetisierungsverhalten und Effekte wie z.B. den Exchange Bias Effekt oder den Riesenmagnetwiderstandseffekt (GMR), welche in derartigen Heterostrukturen auftreten können. Die Probenpräparation erfolgte mittels DC Magnetronsputtern, wobei auf einkristallinen aber auch flexiblen sowie starren amorphen Substraten abgeschieden wurde. Im ersten Teil der Arbeit werden Untersuchungen mit dem Hintergrund einer Anwendung als magnetischer Datenträger vorgestellt. Konkret werden hier die Konzepte Bit Patterned Media (BPM) und 3D Speicher miteinander kombiniert. Letzteres Konzept basiert auf der Verwendung wenigstens zweier austauschentkoppelter ferromagnetischer Schichten, für welche [Co/Pt] Multilagen mit unterschiedlicher magnetischer Anisotropie verwendet wurden. Als Zwischenschichtmaterial diente Pt und Ru. Durch die Charakterisierung des Ummagnetisierungsverhaltens wurde die Austauschkopplung in Abhängigkeit der Zwischenschichtdicke untersucht. Darüber hinaus wurden jene Schichtstapel zur Realisierung des BPM-Konzeptes auf selbstangeordnete SiO2 Partikel mit unterschiedlichen Durchmessern aufgebracht, durch welche sich lateral austauschentkoppelte, eindomänige magnetische Nanostrukturen erzeugen lassen. Zur Untersuchung des Ummagnetisierungsverhaltens und der jeweiligen Größenabhängigkeiten (maßgeblich Durchmesser und Schichtdicke) wurden diese mittels Magnetkraftmikroskopie sowie winkelabhängiger magnetooptischer Kerr Effekt Magnetometrie untersucht. Zur weiteren Vertiefung des Verständnisses noch kleinerer Strukturgrößen erfolgten mikromagnetische Simulationen, bei denen die magnetischen Wechselwirkungen lateral (benachbarte 3D Elemente) als auch vertikal (Wechselwirkungen ferromagnetischer Schichten innerhalb eines 3D Elementes) im Interesse standen, sowie deren Auswirkungen auf das Ummagnetisierungsverhalten des gesamten Feldes. Der Fokus des zweiten Teils liegt auf der Untersuchung des Riesenmagnetwiderstandseffektes in Systemen mit senkrechter Sensitivität. Dafür sind ferromagnetische Schichten mit senkrechter magnetischer Anisotropie nötig, wobei hier die chemisch geordnete L10-Phase der FePt Legierung und [Co/Pt] sowie [Co/Pd] Multilagen Anwendung fanden. Für eine chemische Ordnung der FePt Legierung sind hohe Temperaturen während der Schichtabscheidung notwendig, welche eine hinreichende Austauschentkopplung beider ferromagnetischer Schichten meist nicht gewährleisten. Grund dafür sind einsetzende Diffusionsprozesse als auch Legierungsbildungen mit dem Zwischenschichtmaterial. In der vorliegenden Arbeit konnte der GMR Effekt daher ausschließlich mit einer Ru Zwischenschicht in FePt basierten Trilagensystemen nachgewiesen und charakterisiert werden. Enorme Verbesserungen der magnetoresistiven Eigenschaften werden im Anschluss für [Co/Pt] und vor allem [Co/Pd] Multilagen vorgestellt. Diese Schichtsysteme mit senkrechter magnetischer Anisotropie können bei Raumtemperatur präpariert werden und stellen daher keine weiteren Anforderungen an das Zwischenschichtmaterial sowie die verwendeten Substrate. Hier wurden neben Systemen mit ausschließlich senkrechter magnetischer Anisotropie auch Systeme mit gekreuzten magnetischen Anisotropien intensiv untersucht, da diese durch einen linearen und weitgehend hysteresefreien R(H) Verlauf imHinblick auf Sensoranwendungen enorme Vorteile bieten. Letztendlich wurde die Korrosionsbeständigkeit in Abhängigkeit des Deckschichtmaterials als auch die mechanische Belastbarkeit von auf flexiblen Substraten abgeschiedenen GMR-Schichtstapeln untersucht. Zusätzlich wird in Kapitel 2.5.2 eine experimentelle Studie zum Surfactant-gesteuerten Wachstum der FePt Legierung mittels Molekularstrahlepitaxie vorgestellt. Als Surfactant dient Sb, wodurch die Kristallinität bei geringer Depositionstemperatur deutlich verbessert werden konnte. Die Oberflächensegregation von Sb wurde mittels Auger Elektronenspektroskopie und Rutherford Rückstreuspektrometrie verifiziert und die Charakterisierung magnetischer Eigenschaften belegt einen Anstieg der magnetischen Anisotropieenergie im Vergleich zu Referenzproben ohne Sb. info:eu-repo/classification/ddc/500 ddc:500 info:eu-repo/classification/ddc/530 ddc:530 info:eu-repo/classification/ddc/536 ddc:536 info:eu-repo/classification/ddc/537 ddc:537 info:eu-repo/classification/ddc/538 ddc:538 info:eu-repo/classification/ddc/539 ddc:539 info:eu-repo/classification/ddc/548 ddc:548 info:eu-repo/classification/ddc/600 ddc:600 info:eu-repo/classification/ddc/621 ddc:621 Spintronik; Anisotropie
103	BBT Acoustic Alternative Top Bracing CADD Data Set-NoRev-2022Jun28 Hemphill, Bill 22 July 2022 (has links) This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are (a) a one-piece base for the standard kit's (Martin-style) bracing, (b) 277 Ladder-style bracing, and (c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars. The CADD data set for each of the three (3) top bracing designs includes (a) a nominal 24" x 18" x 3mm (0.118") Baltic birch plywood laser layout of (1) the one-piece base with slots, (2) pre-radiused and pre-scalloped vertical braces with tabs to ensure proper orientation and alignment, and (3) various gages and jigs and (b) a nominal 15" x 20" marking template. The 'provided as is" CADD data is formatted for use on a Universal Laser Systems (ULS) laser cutter digital (CNC) device. Each CADD drawing is also provided in two (2) formats: Autodesk AutoCAD 2007 .DWG and .DXF R12. Users should modify and adapt the CADD data as required to fit their equipment. This CADD data set is released and distributed under a Creative Commons license; users are also encouraged to make changes o the data and share (with attribution) their designs with the worldwide acoustic guitar building community. BBT acoustic guitar brace bracing top CADD CAD DWG DXF R12 lutier ETSU OM orchestra model STEM STEM Guitar building project kit storefront 3mm 0.118" Baltic birch plywood sheet 24 18 3mm 0.118 laser cut engrave etch marking template layout Martin Martin-style X-brace X-bracing X-braced X tone arm tonal variant alternative alt ladder 277 fan classicial European tab slot bump out radiused 300 inch 25 foot 762 meter radius base vertical scallop glue wood go-bar go bar deck jig fixture gage gauge headstock head plate neck contour fret stack stackable align alignment position orientation vertical perpendicular T1 upper bout lower kerfing sand chisel shape weight lighten light tone tap carbon-dioxide CO2 10.6 µm Universal Laser Systems ULS workboard waxed baker sheet Acoustics, Dynamics, and Controls Adult and Continuing Education Algebraic Geometry Appalachian Studies Art Education Educational Technology Elementary Education and Teaching Engineering Education Geometry and Topology Harmonic Analysis and Representation Higher Education and Teaching Industrial and Product Design Manufacturing Music Music Education Other Engineering Science and Materials Polymer and Organic Materials Science and Mathematics Education Secondary Education and Teaching Structural Materials Vocational Education
104	BBT Acoustic Alternative Top Bracing CADD Data Set-NoRev-2022Jun28 Hemphill, Bill 22 July 2022 (has links) This electronic document file set consists of an overview presentation (PDF-formatted) file and companion video (MP4) and CADD files (DWG & DXF) for laser cutting the ETSU-developed alternate top bracing designs and marking templates for the STEM Guitar Project’s BBT (OM-sized) standard acoustic guitar kit. The three (3) alternative BBT top bracing designs in this release are (a) a one-piece base for the standard kit's (Martin-style) bracing, (b) 277 Ladder-style bracing, and (c) an X-braced fan-style bracing similar to traditional European or so-called 'classical' acoustic guitars. The CADD data set for each of the three (3) top bracing designs includes (a) a nominal 24" x 18" x 3mm (0.118") Baltic birch plywood laser layout of (1) the one-piece base with slots, (2) pre-radiused and pre-scalloped vertical braces with tabs to ensure proper orientation and alignment, and (3) various gages and jigs and (b) a nominal 15" x 20" marking template. The 'provided as is" CADD data is formatted for use on a Universal Laser Systems (ULS) laser cutter digital (CNC) device. Each CADD drawing is also provided in two (2) formats: Autodesk AutoCAD 2007 .DWG and .DXF R12. Users should modify and adapt the CADD data as required to fit their equipment. This CADD data set is released and distributed under a Creative Commons license; users are also encouraged to make changes o the data and share (with attribution) their designs with the worldwide acoustic guitar building community. BBT acoustic guitar brace bracing top CADD CAD DWG DXF R12 lutier ETSU OM orchestra model STEM STEM Guitar building project kit storefront 3mm 0.118" Baltic birch plywood sheet 24 18 3mm 0.118 laser cut engrave etch marking template layout Martin Martin-style X-brace X-bracing X-braced X tone arm tonal variant alternative alt ladder 277 fan classicial European tab slot bump out radiused 300 inch 25 foot 762 meter radius base vertical scallop glue wood go-bar go bar deck jig fixture gage gauge headstock head plate neck contour fret stack stackable align alignment position orientation vertical perpendicular T1 upper bout lower kerfing sand chisel shape weight lighten light tone tap carbon-dioxide CO2 10.6 µm Universal Laser Systems ULS workboard waxed baker sheet Acoustics, Dynamics, and Controls Adult and Continuing Education Algebra Algebraic Geometry Appalachian Studies Applied Mathematics Art Education Biology Computer-Aided Engineering and Design Educational Technology Elementary Education and Teaching Engineering Education Engineering Science and Materials Forest Sciences Geometry and Topology Harmonic Analysis and Representation Industrial and Product Design Manufacturing Music Music Education Other Engineering Other Engineering Science and Materials Physics Polymer and Organic Materials Polymer Chemistry Science and Mathematics Education Secondary Education and Teaching Structural Materials Vocational Education

Page generated in 0.041 seconds