Småföretag har en väsentlig roll på Sveriges marknad där de tillför storaarbetsmöjligheter och står för hälften av Sveriges BNP. De står dock införutmaningar då de ofta brister på centrala kunskaper och resurser, och mångasmåföretag överlever endast ett fåtal år. Genom nätverkande kan småföretagenkomma åt de grundläggande tillgångarna men de har svårt att etablera ett stortoch betydelsefullt nätverk då de är små och okända på marknaden. Inkubatornsroll i samhället avser till att hjälpa småföretag att skapa en snabb tillväxt för attsedan kunna överleva själva ute på marknaden. Men det brister om förståelsekring hur småföretag arbetar med en inkubator samt hur småföretag kan skapamöjligheter för att utöka nätverket utifrån samarbetet med inkubatornsverksamhet, därav är det problemformuleringarna. Syftet för denna studie är attöka förståelse kring hur småföretagen kan främja deras nätverkande och hurinkubatorns verksamhet kan stödja och tillhandahålla resurser. För att kunna besvara studiens syfte och problemformuleringar har relevant teorioch empiri samlats in. Teorin finner att småföretagets interna och externanätverk är en väsentlig roll för överlevnad och tillväxt där entreprenörenspåverkan tydliggörs. För att utveckla ett välfungerande nätverk finner teorin attett samarbete tillsammans med inkubator och dess nätverk kan hjälpasmåföretaget. En egenkonstruerad modell förtydligar detta. Sista kapitletförklarar vad den teoretiska nätverksstrukturen kluster innebär och vad ettkluster kan möjliggöra för de aktörer som befinner sig inom strukturen. Detteoretiska kapitlet kompletteras med ett empiriskt kapitel. Den empiriskainsamlingen använder en kvalitativ metod där semistrukturerade intervjuer harutförts. Sex intervjuer genomfördes med grundare i varsitt småföretag som hareller just nu samarbetar med en inkubator. Den empiriska insamlingen gavskribenterna till denna studie en förståelse för vardera erfarenheter och socialaverklighet inom företagande och småföretagens nätverk kopplat till inkubatorn. Genom att sammanställa teori med empiri har dessa kunnat jämföras ochkopplas samman i ett analyskapitel. Analysen resulterade i en utveckling av denegenkonstruerade modellen från teorin där inkubatorn och kluster sammanfördesdå kopplingar mellan dessa uppkom under empirin. Slutsatsen visade på att detär av stor betydan att underhålla nätverksrelationerna inom småföretaget menockså med övriga entreprenörer och aktörer för att skapa nya och goda kontakter,både internt och externt. Där studien visade på att inkubatorns nätverksstrukturkluster, kan ses som en möjlighet för småföretagens tillväxt. Med brister på ettstrukturerat nätverk hos småföretagen finns risk att resurserna och tillgångarnapåverkas negativt samt att företaget kan gå miste om erfarenheter och nyainnovationer, vilket är något som studien har visat att inkubatorn kantillhandahålla för småföretagen. Det framkom även att den individuellaentreprenörens initiativtagande är väsentligt vad gäller ett småföretagsutveckling, framgång och förmåga att styra resultatet. / Small businesses have a significant role in the development of Sweden'smarkets, where they provide great job opportunities and are responsible for halfof Sweden's GDP. Small businesses face challenges as they often have a lack ofknowledge and resources. Small businesses can access the basic assets but theyhave difficulties establishing a large and significant network as they are smalland unknown in the market. In that case incubators can be of great use.Incubators help small businesses create a more rapid growth in order to then beable to survive independently on the market. According to the authors of thestudy there is a lack of understanding how small businesses work with anincubator and how small businesses can create opportunities to expand theirnetwork based on cooperation with the incubators. The problem statement andpurpose of this study are formulated to increase the understanding of how smallbusinesses can promote their network and how the incubators activities cansupport and provide resources. To be able to answer the purpose and the problem statement of this study,relevant theory and empirical data have been collected. The theoreticalframework finds that the small businesses internal and external networks areessential for survival and growth, where the entrepreneurs impact is clarified.To develop a well-functioning network, the theory finds that a collaborationwith the incubator and its network can aid small businesses. A self-designedmodel clarifies this. The theoretical framework also includes an explanation ofnetwork structured clusters, what defines a cluster, and the actors within thestructure. The empirical collection is made from a qualitative method wheresemi-structured interviews have been conducted. Six interviews were conductedwith founders from each small business who previously have or are currentlycollaborating with an incubator. The empirical collection gave the authors ofthis study an understanding of each small business' own experiences. By compiling the theory with the empirical data, it was possible to compare andlink the information in an analysis chapter. The analysis resulted in adevelopment of a self constructed model from the theory where the incubatorand cluster were brought together. The conclusion showed that it is of greatimportance to maintain the network relations within the small business but alsowith other entrepreneurs and actors to create new and beneficial contacts, bothinternally and externally. The study also showed that the incubators networkstructure and cluster can be seen as an opportunity for small business growth. Ifthere are deficiencies in a small business network there is a risk that resourcesand assets will be negatively affected and the company may lose experience andnew innovation, which is something that the study has shown that the incubatorcan provide for small businesses. It also emerged that the individualentrepreneurs initiative is essential in terms of small business development,success and ability to control the result.

In life science practices, cell culturing is one of the most common procedures in biological experiments involving the use of microscopes. Cell cultures are typically viewed with a microscope to monitor changes after adjusting the environment for the cells or to intermittently supervise for cellular behavior. However, it is currently not possible to continuously monitor cellular behavior due to the absence of solutions for wireless control of a microscope to image cell cultures while maintaining the environment conducive to cell growth. This thesis provides a miniaturized, cost-effective and versatile microscope down-scaled enough to operate inside incubators. This versatility encompasses the ability to switch between bright-field mode and fluorescence mode, capture images in sequences, save said sequential images to a micro SD-card as well as enabling downloading of individual images to a local file manager. All these features are done through a user interface set up by either a local WiFi or access point from the microscope, making the operation possible through wireless connection. In addition, this thesis is a continuation of a previous thesis that was completed in the spring of 2023. The purpose of this thesis is to improve on the result of the main research question of the previous work. / Inom livsvetenskapliga metoder är cellodling en av de vanligaste procedurerna i biologiska experiment som involverar användning av mikroskop. Cellkulturer ses vanligtvis med ett mikroskop för att bevaka förändringar efter att ha ändrat miljön för cellerna eller för att intermittent övervaka cellulärt beteende. Men det är för närvarande inte möjligt att kontinuerligt övervaka cellulärt beteende på grund av avsaknaden av lösningar för trådlös kontroll av ett mikroskop för att avbilda cellkulturer samtidigt som miljön som främjar celltillväxt bibehålls. Detta examensarbete tillhandahåller ett miniatyriserat, kostnadseffektivt och mångfasetterat mikroskop, som är tillräckligt nedskalad för att fungera i inkubatorer. Denna mångsidighet omfattar möjligheten att växla mellan ljusfältsläge och fluorescensläge, ta bilder i sekvenser, spara nämnda sekventiella bilder på ett micro SD-kort samt ladda ner enskilda bilder till en lokal filhanterare. Alla dessa funktioner görs via ett användargränssnitt som ställs in av antingen ett lokalt WiFi eller accesspunkt från mikroskopet, vilket gör operationen möjlig via trådlös anslutning. Dessutom är detta examensarbete en fortsättning på ett tidigare examensarbete som avslutades våren 2023. Syftet med detta examensarbete är att förbättra resultatet på den huvudsakliga forskningsfrågan i det tidigare arbetet.

摘要 台灣生物科技產業，近年來在政府大力推動下，投資金額、企業營收、就業率與新創公司數逐年成長。然而台灣生物科技水準與美歐日等先進國家相比，技術層次仍有待加強，而台灣生物科技產業發展，相較於美歐日等地區生物科技產業的蓬勃發展，仍屬於播種萌芽，逐漸起飛的階段。 台灣發展新興產業的關鍵因素：如人才、資金、技術等關鍵資源極為有限，因此若能藉由地理區域的集中，來凝聚上述有限的關鍵資源，或可加速台灣生物科技產業的發展。 本研究藉由實地參訪和個案研究；再輔以次級資料（公開文件）的蒐集、整理與分析，來探討生物科技產業聚落發展的關鍵因素。研究對象包括：美國的生物科技產業聚落（Philadelphia，New Haven，Boston，RTP、North Carolina）及歐洲瑞典的生物科技產業聚落（Stockholm / Uppsala，Gothenbrug，Malmo / Lund，Linkoping，Umea）等。 由於生物科技公司是生物科技產業聚落的構成主體，因此首先就企業經營管理的觀點，探討生物科技新創公司形成的關鍵因素；另就產業聚落發展的觀點，探討生物科技產業聚落發展的關鍵因素：如生產要素條件、相關與支援性產業、產業聚落的成長與回饋等；再探討生物科技產業聚落內，使得新事業源源不斷形成，產業聚落得以永續發展的機制；最後由先進國家生物科技產業聚落發展的經驗，對台灣地區發展生物科技產業聚落的政策意涵，提出相關建議。 經由本研究可以得到下列發現：生物科技新創公司最重要的生存方式，在於如何善用環境外部資源，來突破企業內部資源的有限性。而生物科技產業聚落不是無中生有，首先必須先存在大學及研究機構等專業化生產要素，才會設立科學園區或育成中心。大學及研究機構現有的研究領域，決定科學園區或育成中心的發展特色。生物科技公司是生物科技產業聚落的構成主體，而生物科技新創公司形成的機制（如種子基金的設置等）是產業聚落永續發展的驅動力量。種子基金、科學園區或育成中心分別為產業聚落發展重要的無形及有形的連結機制。 / Abstract The amount of investment, the revenues and the employment of firms, and the number of start-ups, within Taiwan biotechnology industry, promoted by the government, increased gradually. However, the level of biotechnology, compared with other developed countries, seems still a lot to be upgraded. Moreover, the biotechnology industry developed in Taiwan is still in the early stage. Therefore, the limited key resources such as talents, capital, technology, if can be concentrated in a specific region, then the emerging industry like biotechnology industry may be developed faster. The study is, use of the field and case study, and the secondary data collected, to explore the key success factors in the development of biotechnology industry clusters. The cases studied include American biotechnology industry clusters, like Philadelphia, New Haven, Boston, RTP-North Carolina, and Sweden biotechnology industry clusters, like Stockholm-Uppsala, Gothenbrug, Malmo-Lund, Linkoping, Umea. Because the biotechnology firms are the building blocks of biotechnology industry clusters, it is first to explore the key success factors of the formations of new ventures from the perspective of business administration. From the perspective of cluster development, it is to explore the key success factors of the formations of new clusters such as the production factors, the related and supporting industry, the growth and feedback of clusters. The mechanism about new ventures growing forever to sustain the clusters development is then explored. From the experiences of these developed countries in the clusters development, the study proposes some suggestions about the policy making on the biotechnology clusters development in Taiwan. From the study, there comes the following finding：The biotechnology ventures leverage the resources from the environment to overcome the limited resources within the firms. The biotechnology clusters can be happened nowhere. First, there will be existed some professional production factors such as universities and research institutes, then come the science-park and incubator. The universities and research institutes define the characteristics of the science-park and incubator. The mechanisms about the formation of new ventures such as the seed fund become the driving forces of biotechnology clusters. The seed fund or the science-park and incubator are the intangible or tangible linkage mechanisms about the formation of biotechnology clusters.

The University of this interest and its library division is involved in a major transformation process, aiming to enhance the learning experience for students by modernizing learning spaces, enhancing the personalized learning, and extending support for faculty and student scholarship. One part of the transformation consist of rearranging the library space and its services and introducing a new media based faculty consisting media related career paths. During the investigation and analysis of the library, we have looked into a wide range of data including history of the library, strategic plan of the university academic technology blueprint, academic plan, the media program, reports on workshops and meeting held by the authority of library, etc. provided by the university. In order to encapsulate more information and insight, we have conducted a couple of meetings with the head of the library and the head of library IT. By considering the stakeholders’ interests, we examine the status quo and illustrate the situation in form of a Rich Picture. By means of the Soft Systems Methodology we try to identify potential relationships between the new media faculty and the library services and eventually finalized our examination by recommending additional value enhancing services. After rigorous analyzing all of the data, specifically strategic mission of the university and library, and the media program, we recommend to establish a Business Incubator, which will enhance core capabilities of a student including creativity , managerial, and analytical ability as well as provide essential guidance, supports, and tools to students to implement their idea. The suggested Business Incubator will act as a bridge between academic learning and the real world applications. Finally, we recommend specific services including market research and assistance, access to networking and funding information, center for research and development, and Entrepreneurship and innovating education forum, which will enhance digital capabilities of students/participants and fulfill some of the core strategic objectives of the library and the university as well. / <p>This specific study is about a report in the Informatics course 5IK501 during the school year of 2016/2017.</p>

The purpose of this research was to conduct an exploratory study of the information processing utilized by incubator-housed manufacturers during channel member selection. The study included the evaluation of the decision models used by the manufacturers as well as criteria used in the selection process. The study was specifically designed to achieve the following objectives. First, the research was to identify the evaluation modes used by the manufacturers as either compensatory or noncompensatory. Second, the study was to evaluate the effect of the task on the selection of the evaluation model(s) used during the channel member selection process. Third, the study was to evaluate the effect of the selected decision strategy on the amount of information used during the decision process. Finally, the study was to identify and examine the importance of the criteria used by the manufacturers in the selection process. The methodology in this study consisted of primary research using protocol analysis as the main data gathering technique. A ranking instrument was also mailed to the respondents prior to the protocol session. The population for the study was identified as all manufacturers located in publicly-sponsored business incubators. A total of 235 incubators were in existence with approximately 47 percent of them being publicly-sponsored. Approximately 42 percent of the incubators house at least one manufacturing firm. It was estimated that there were approximately 46 manufacturing firms located in public incubators. A sample of six was used in this study. The statistical analysis included frequencies, cross tabulations, correlations, paired comparisons, and measures of association. The findings of this study suggest that the incubator-housed manufacturers' choice of evaluation models was not affected by the task nor did the selected strategy influence the amount of information used by the manufacturers. The findings indicate a need for further research to evaluate the relationships brought forth in this study. Based on the conclusions and findings of this study, recommendations for further research were given.

Made available in DSpace on 2016-04-26T20:23:36Z (GMT). No. of bitstreams: 1 Tania Ishikawa Mazon.pdf: 1618843 bytes, checksum: 86eff0883936b6eccaf1343b2447eb20 (MD5) Previous issue date: 2015-03-18 / In the 1990s of the twentieth century the term innovation became to be used frequently and attract increasing attention of policymakers and the productive sector in Brazil. Having as background the State's promotion of scientific development, research and technological expertise recommended by the Federal Constitution of 1988 and the São Paulo State Constitution of 1989 and the urgent need for the country to innovate more and more, this study was developed with the purpose of analyzing the administrative function of support and, in particular, the construction of specialized and cooperative environments of innovation in the light of Federal Law N° 10973/2004 and the Complementary State Law N° 1049/2008. It was also reviewed the role of Law in developing strategic alliances and cooperative projects of innovation, as well as in the building of research networks, business incubators, technology parks, partnership agreements and minority stake of the Government in the capital of the privately held company, by highlighting controversies arising from the implementation of those laws, as well as parameters to guide public promotional activities. At the end, the findings obtained during the work were listed / Na década de 90 do século XX o termo inovação passou a ser utilizado com frequência e a atrair a crescente atenção de formuladores de políticas públicas e do setor produtivo no Brasil. Tendo como pano de fundo o estímulo do Estado ao desenvolvimento científico, à pesquisa e à capacitação tecnológicas preconizado pelas Constituições Federal de 1988 e Paulista de 1989 e a necessidade premente de o País inovar cada vez mais, o presente estudo foi desenvolvido com o objetivo de analisar a função administrativa de fomento e, especialmente, a construção de ambientes especializados e cooperativos de inovação, à luz da Lei Federal nº 10.973/2004 e da Lei Complementar Paulista nº 1.049/2008. Foi também examinado o papel do Direito na constituição de alianças estratégicas e de projetos cooperativos de inovação, assim como na formação de redes de pesquisa, incubadoras, parques tecnológicos, acordos de parceria e na participação minoritária do Poder Público no capital de empresa privada, apontando polêmicas surgidas na aplicação das leis citadas, assim como parâmetros para orientar a atuação promocional pública. Ao final, foram arroladas as conclusões obtidas ao longo do trabalho

Made available in DSpace on 2016-03-15T19:26:28Z (GMT). No. of bitstreams: 1 Maurici Dias Gomesprot.pdf: 1098318 bytes, checksum: c6e030078204fe787741815a40cce9a3 (MD5) Previous issue date: 2015-02-10 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / The present study analyzes resources and capabilities achieved by resident enterprises in Technological Incubator of Guarulhos, which have created value for products and services offered to face its competitors based on Resource-Based View - RBV. This subject was considered important because of the limited availability of studies dealing with the development of resources and capabilities by micro and small companies resident in business incubators. The competitive advantage of constructs, value creation, resources and strategic capabilities were reviewed in this study. The research method adopted was the qualitative exploratory and descriptive using of a standardized script containing open questions. The content analysis technique was used for the treatment of the data. Nine entrepreneur-managers of resident enterprises in Technological Incubator of Guarulhos were interviewed, whose business ranging from the production of durable goods to services in the areas of biotechnology, electromechanical assemblies, cosmetics, plastic injection, metallurgy, consulting and training, information technology and communication. As a result, it might be said that the resources of technical expertise and the personification of the service, in addition to capacity building and improvement products for specific demands and customization with product innovation, were considered strategic for the generation of value to products and services offered by the incubated companies that made up the study sample. / Esta dissertação teve por objetivo caracterizar os recursos e capacidades existentes e adquiridos por empresas residentes na Incubadora Tecnológica de Guarulhos, que tenham propiciado a criação de valor aos produtos e serviços ofertados para enfrentarem os seus concorrentes, sob a perspectiva da Visão Baseada em Recursos VBR. Esse tema foi considerado relevante devido a pouca disponibilidade de estudos que tratam do desenvolvimento de recursos e capacidades pelas micro e pequenas empresas residentes em incubadoras de empresas. Para tanto, foram revisados os construtos de vantagem competitiva, criação de valor, recursos e capacidades estratégicos. O método de pesquisa adotado foi o qualitativo de caráter exploratório e descritivo, com o emprego de um roteiro padronizado contendo perguntas abertas. Utilizou-se a técnica de análise de conteúdo para o tratamento dos dados. Foram entrevistados os empresários-gestores de nove empresas residentes na Incubadora Tecnológica de Guarulhos, com negócios variando entre a produção de bens duráveis a serviços, nas áreas de biotecnologia, eletrometalmecânica, cosméticos, injeção plástica, metalurgia, consultoria e treinamento, tecnologia da informação e comunicação. Como resultado, pôde-se afirmar que os recursos do conhecimento técnico especializado e da personificação do serviço, além das capacidades de desenvolvimento e aprimoramento de produtos para demandas específicas e a personalização com inovação do produto, foram considerados estratégicos para a geração de valor aos produtos e serviços ofertados pelas empresas incubadas que integraram a amostra deste estudo.

Russia's startups fail at high rates. The purpose of this multiple case study was to understand the market-entry strategies used by accelerated startup managers to succeed in business longer than the first 3 years. The target population for this study was 3 startup owners who completed an acceleration program from the Internet Initiatives Development Fund and continued to operate businesses that generated revenue. The participants in the study were located in 3 different cities in Russia: Moscow, Saint Petersburg, and Tomsk. The conceptual framework for the study was Raheem and Akhuemonkhan's theory of enterprise development and von Bertalanffy's general system theory. Data collection involved semistructured interviews, review and analysis of company documents, reflective journal entries, and direct observation of the management operations and processes. Data were analyzed using Yin's 5-step data analysis process. A thematic analysis of the data revealed 4 themes: evolution of an entrepreneur, sales strategy, acceleration impact, and recommendations for accelerators and incubators. The results of the study may contribute to startup survivability as well as exchanging successful experience among new entrepreneurs. For those people who plan to start a business, this study may contribute understanding the skills for initiating a startup.

<p>This thesis is about publicly funded support of technology-based ventures. These ventures are regarded as solutions to create growth and societal development. They are commonly originated from universities, institutes or other firms and their products or techniques are commonly new or at least different from the ordinary. They are therefore considered as being of higher risk than generic new firms, but if successful they may also give higher returns. Hence, a range of efforts has been undertaken to support them. However, concerning the issue of public support, gaps of research have been exposed.</p><p>This thesis aims to give some answers on the question of what characterizes the public support given to technology-based ventures in Sweden. It elucidates two types of public support, the “configuration-type” and the “process-type” The first is studied by using statistical databases built upon the conditional loans and the innovation subsidies that were offered by Sweden Innovation Centre during the years 1994-2003. The second type concerns incubator support, and investigates how best practise incubators can be evaluated. Among the results, it can be mentioned that different support actors use different selection criteria depending on their goals, however the credibility of the applying venture is crucial for approval. Furthermore, a framework for best practice evaluation is developed.</p> / Report code: LiU-Tek-Lic 2005:72. Pages 49-68 and 87-105 has been removed since the author do not have the copyright for articles one and three when published in a scientific journal.

Submitted by infopei ufba (infopei@ufba.br) on 2017-05-10T19:11:06Z No. of bitstreams: 1 TeseJosemirAlexandrino.pdf: 4030416 bytes, checksum: 971f2eadd7c4d23fb1945b3a4dfbd1d5 (MD5) / Approved for entry into archive by Flávia Sousa (flaviabs@ufba.br) on 2017-05-29T19:00:57Z (GMT) No. of bitstreams: 1 TeseJosemirAlexandrino.pdf: 4030416 bytes, checksum: 971f2eadd7c4d23fb1945b3a4dfbd1d5 (MD5) / Made available in DSpace on 2017-05-29T19:00:57Z (GMT). No. of bitstreams: 1 TeseJosemirAlexandrino.pdf: 4030416 bytes, checksum: 971f2eadd7c4d23fb1945b3a4dfbd1d5 (MD5) / MS, CNPq, FAPESB, SESAB, SECTI e IFBA / O uso massivo de tecnologia na área da saúde tem elevado a efetividade dos procedimentos médicos, com consequente melhoria da qualidade de vida dos pacientes. Entretanto, tais tecnologias trazem riscos intrínsecos, que podem resultar em danos, quando mal utilizadas ou mantidas. Neste contexto, encontram-se os Equipamentos Médico-hospitalares (EMH) que podem apresentar problemas que resultem em diagnósticos errôneos, terapias inapropriadas ou que comprometam a segurança dos usuários. A avaliação periódica, e em particular, do desempenho metrológico, constitui-se em importante meio para alcançar o uso seguro do EMH. As soluções encontradas para tal avaliação são rigidamente condicionadas às especificidades de cada tipo de EMH e dificilmente podem ser aproveitadas para outros. Embora não tenha sido encontrada na literatura uma solução generalista que possa ser aplicada a determinados tipos de EMH, esta indica viabilidade de aplicação, em função dos constantes avanços tecnológicos do setor. Neste sentido, este trabalho apresenta uma metodologia para a avaliação do desempenho metrológico de EMHs e para tal, foi desenvolvido um sistema que reúne instrumentos de medição integrados a um software gerenciador de ensaios. Este software realiza a aquisição e monitoramento de dados de medição relativos às variáveis metrológicas do equipamento sob teste, avalia a adequação destes dados a requisitos metrológicos preestabelecidos e emite relatório de conformidade. O sistema permite a configuração de diversos parâmetros, possibilitando a execução de avaliações de desempenho metrológico em diferentes tipos de EMH. Para fins de validação, o sistema foi configurado para realizar avaliações em bisturis elétricos e incubadoras neonatais. Os resultados mostram a eficácia da metodologia desenvolvida e a eficiência da plataforma computacional para avaliação metrológica de EHM. / The massive use of technology in health care has increased the effectiveness of medical procedures, with consequent improvement of quality of life of patients. However, such technologies carry inherent risks that can result in damage when misused or maintained. In this context, are the medical and hospital equipment (MHE) that can present problems that result in misdiagnosis, inappropriate therapies or which compromise the safety of users. The periodic assessment, especially of the metrological performance constitutes an important means to achieve the MHE safe use. The solutions for such evaluation are tightly constrained to the specific characteristics of each type of MHE and can hardly be reutilized for others. Although not found in the literature a general solution that can be applied to certain types of MHE, this indicates the feasibility of application, in function of the constant technological advances in the medical equipment industry. Thus, this work presents a methodology for evaluating the metrological performance of MHE and for such, a system was developed that brings together measuring instruments integrated into software for testing manager. This software performs the acquisition and monitoring of measurement data related to the metrological variables of equipment under test, assesses the adequacy of these data to preestablished metrological requirements and issues a compliance report. The system allows configuration of various parameters, enabling the execution of metrological performance evaluations in different types of MHE. For verification purposes, the system was configured to perform evaluations of high frequency electrosurgical scalpels and neonatal incubators. The results show the effectiveness of the developed methodology and the efficiency of the computational platform for metrological evaluation of MHE.