Over the last sixty years, voting patterns in the United States have changed dramatically, and this is especially true in the state of Florida. Though there is some literature in the field of political science that outlines the voting and election history of Florida and identifies some trends, this literature is extremely limited and is not comprehensive of the data that is available up to the present day. This study seeks to find Florida’s voting patterns and to explain how they can be understood by both the casual observer and the political scientist. To do so, unique methodology was applied that used the "relative margin" of both a county and a region in a particular election to give the Democratic nominee’s performance context both in the election in question and in history, by comparing the actual margin of victory or defeat of the Democratic nominee to the statewide margin of victory or defeat. This was an illuminating process that ultimately revealed some truths about the election history of Florida: the counties and regions most likely to vote for Democratic nominees in the 1950s and early 1960 are now among the least likely to do so, and the counties and regions most likely to vote for Republican nominees in the 1950s and early 1960s are now considered to be "swing" or "tossup" areas that are regularly and alternatively won by Democratic and Republican nominees. Additionally, the pattern of each region in how it voted in presidential elections was compared to forty seven other states in the country to provide further context as to how the election patterns can be understood in context.

Les zones côtières ne sont prises en compte dans les budgets globaux de CO2 atmosphérique que depuis peu. Il s’avère que bien qu’elles ne représentent globalement que de faibles superficies, les flux de carbone et de nutriments y sont très significatifs à l’échelle globale. On sait peu de chose sur le comportement des écosystèmes lagunaires vis-à-vis du CO2 et, encore moins des zones intertidales où les échanges avec l’atmosphère ont lieu alternativement avec l’eau et le sédiment. Les objectifs de cette étude ont été d’une part, d’établir le bilan de carbone échangé entre la lagune d’Arcachon, l’atmosphère et le milieu terrestre, et d’autre part de mettre en relation ces flux avec la production nette de l’écosystème (NEP) afin de mieux caractériser le statut métabolique de celle-ci ainsi que les facteurs environnementaux clés. Pour cela, nous avons mis en place pour la première fois et à différentes saisons et stations, des mesures directes de flux de CO2 par Eddy Corrélation, une méthode fonctionnant en continu pendant l’immersion et l’émersion. En parallèle, les apports de carbone terrestre sous ses différentes formes ont été quantifiés par un suivi annuel sur 9 rivières alimentant la lagune. L’export total de carbone par le bassin versant à travers les eaux de surface des rivières est estimé à 116 t C km-2 an-1 dont 39% est exporté à la lagune sous forme organique dissoute (DOC) du fait de la prédominance de podzols dans le bassin versant. La forte minéralisation de la matière organique terrestre dans les sols et eaux souterraines sursature largement les eaux en CO2 et l’export sous forme de carbone inorganique dissoute (DIC) représente environ 21%. La formulation d’un modèle mathématique, le « StreamCO2-DEGAS », basé sur les mesures de pCO2, de concentrations et de compositions isotopiques en DIC a permis de montrer que 43% de l’export total de carbone était dégazé sous forme de CO2 depuis les rivières vers l’atmosphère, réduisant alors le flux net entrant dans la lagune à 66 t C km-2 an-1. Concernant la mesure de flux verticaux, l’analyse cospectrale ainsi que les résultats obtenus en adéquation avec les contrôles physiques et biologiques aux différentes échelles tidale, diurne et saisonnières, ont permis de valider la méthode de l’Eddy Covariance en zone intertidale. Sur l’ensemble de la période de mesures, les flux de CO2 étaient faibles, variant entre -13 et 19 µmol m-2 s-1. Des puits de CO2 atmosphérique à marée basse le jour ont été systématiquement observés. Au contraire, pendant l’immersion et à marée basse la nuit, des flux positifs ou négatifs ou proche de zéro ont été observés suivant la saison et la station étudiées. L’analyse concomitante des flux de CO2 et des images satellites du platier à marée basse le jour a clairement permis de discriminer l’importance relative des deux cycles métaboliques distincts des principaux producteurs primaires avec (1) les herbiers de Zostera noltii à cycle annuel long, dominant la NEP en été et en automne à la station la plus centrale et (2) les communautés microphytobenthiques, dominant la production primaire brute (PPB) au printemps à la même station et en automne au fond du bassin. Un recyclage rapide de cette production durant l’immersion et l’émersion a aussi clairement été mis évidence. Au vue des différents résultats, la technique d’Eddy Covariance utilisée en zone intertidale laisse envisager d’intéressantes perspectives en termes de connaissances sur les budgets de carbone et les processus écologiques et biogéochimiques dans la zone côtière. / The coastal zone is only taken into account since recently in global carbon budgeting efforts. Although covering globally modest surface areas, carbon and nutrient fluxes in the coastal zone appear significant at the global scale. However, little is known about the CO2 behaviour in lagoons and even less in intertidal zones where exchanges with the atmosphere occur alternatively with the water and the sediment. The purposes of this work are, on one hand, to establish the carbon budget between the Arcachon lagoon, the atmosphere and the terrestrial watershed and on the other hand, to link these fluxes with the net ecosystem production (NEP) and better characterize its metabolic status along with the relevant environmental factors. For the first time, CO2 flux measurements by Eddy Correlation have been carried out at different seasons and stations in the tidal flat. In parallel, the total terrestrial carbon export from river waters has been quantified throughout a complete hydrological cycle in nine watercourses flowing into the lagoon. The total carbon export from the watershed through surface river waters is estimated at 116 t C km-2 yr-1 on which 39% is exported to the lagoon as dissolved organic carbon (DOC) owing to the predominance of podzols in the watershed. Intense organic matter mineralization in soils and groundwaters largely over-saturate river waters in CO2 on which export accounts for 21% as dissolved inorganic carbon (DIC). The mathematical “StreamCO2-DEGAS” model formulation based on water pCO2, DIC concentrations and isotopic composition measurements permits to show that 43% of the total carbon export was degassed as CO2 from the riverine surface waters to the atmosphere, lowering then this latter to 66 t C km-2 yr-1. With respect to the CO2 flux measurements in the lagoon, cospectral analysis and the well accordance of results with physical and biological controls at the tidal, diurnal and seasonal time scales permit to validate the Eddy Correlation technique over tidal coastal zone. CO2 fluxes with the atmosphere, during each period, were generally weak and ranged between -13 and 19 µmol m-2 s-1. Low tide and daytime conditions were always characterized by an uptake of atmospheric CO2. In contrast, during the immersion and during low tide at night, CO2 fluxes where either positive or negative, or close to zero, depending on the season and the site. The concomitant analysis of CO2 fluxes with satellite images of the lagoon at low tide during the day clearly discriminate the relative importance of the two distinct metabolic carbon cycling involving the main primary producers, i.e. (1) the Zostera noltii seagrass meadow predominance on the NEP in autumn and summer in the more central station, with an annual cycling and (2) the microphytobenthos community predominance on the gross primary production (GPP) in spring at the same station and in autumn in the inner part of the bay where a rapid carbon cycling during the immersion and the emersion was clearly highlighted. The different results obtained with the Eddy Correlation technique over tidal flats opens interesting perspectives on the knowledge of the carbon budget and the biogeochemical and ecological processes within the coastal zone.

The following is a collection of original poetry. The manuscript consists of an introduction explaining influences and style, and four chapters of poems categorized by subject matter: object/nature, writing/creativity, relationships, and family/figures. INDEX WORDS: Poetry, Poem

Diploma thesis develops comprehensive documentation of the new building construction of residential house on the level of the implementation of the project construction. Proposal emphasizes layout of linked to ensure the technical design, structural, fire safety, protection against noise, energy saving, safety in use. Work is performed in an electronic format using AutoCAD and Microsoft Word (PDF Creator).

No description available.

This thesis presents work on a holistic approach for improving the overall design of solar cooling systems driven by solar thermal collectors. Newly developed methods for thermodynamic optimization of hydraulics and control were used to redesign an existing pilot plant. Measurements taken from the newly developed system show an 81% increase of the Solar Cooling Efficiency (SCEth) factor compared to the original pilot system. In addition to the improvements in system design, new efficiency factors for benchmarking solar cooling systems are presented. The Solar Supply Efficiency (SSEth) factor provides a means of quantifying the quality of solar thermal charging systems relative to the usable heat to drive the sorption process. The product of the SSEth with the already established COPth of the chiller, leads to the SCEth factor which, for the first time, provides a clear and concise benchmarking method for the overall design of solar cooling systems. Furthermore, the definition of a coefficient of performance, including irreversibilities from energy conversion (COPcon), enables a direct comparison of compression and sorption chiller technology. This new performance metric is applicable to all low-temperature heat-supply machines for direct comparison of different types or technologies. The achieved findings of this work led to an optimized generic design for solar cooling systems, which was successfully transferred to the market.

El análisis de estructuras paleokársticas ha atraído, en los últimos años, el interés de numerosos investigadores a la información que aportan a la geología aplicada y la paleogeomorfología. Estudios recientes se han centrado en la aplicación de técnicas de exploración del subsuelo debido a la escasez de afloramientos. En la presente Memoria se analizan íntegramente las formas de hundimiento pretéritas que afloran discontinuamente con gran detalle, en los acantilados de las costas meridional (plataforma de Llucmajor) y oriental (plataforma de Santanyí) de Mallorca, a lo largo de más de 75 km de línea de costa, afectando a las rocas carbonáticas del Mioceno superior. El estudio se ha centrado en la distribución geográfica, evolución geológica y las características geomorfológicas de estos paleocolapsos, con especial énfasis en su génesis, su relación con la arquitectura y distribución de las facies, así como en las formas y productos asociados.Los paleocolapsos han sido descritos en su contexto litoestratigráfico y estructural dentro de las mencionadas plataformas carbonáticas, siendo este trabajo una contribución al conocimiento del karst en estas unidades geológicas y su relación con las fluctuaciones marinas. La karstogénesis queda reflejada en estas formas pretéritas donde se han observado depósitos y formas de disolución ligadas a la dinámica kárstica controlada, en el caso que nos ocupa, por las fluctuaciones del nivel del mar: brechas, sedimentos detríticos, cementos, así como distintos tipos y volúmenes de porosidad. La mayor parte de estas formas (sobre un total de 177), cuyas dimensiones en sección varían desde pocos metros hasta afloramientos con 28 m de altura y más de 100 m en la horizontal, se ubican en la plataforma de Santanyí a excepción de dos estructuras ubicadas en la plataforma de Llucmajor.El análisis geológico y su relación con los paleocolapsos muestra como en la plataforma de Llucmajor éstos afectan a las facies de la Unidad Complejo Arrecifal (facies de back reef y frente arrecifal). Sin embargo, en la plataforma de Santanyí, los paleocolapsos afectan tanto a parte del Complejo Arrecifal (facies de back reef), como a la totalidad de la Unidad Calizas de Santanyí. A partir del estudio de la arquitectura de facies del Complejo Arrecifal en la plataforma de Llucmajor se ha establecido el modelo deposicional en la plataforma de Santanyí. Sin embargo, ésta última se encuentra compartimentada como consecuencia del control de dos fallas en dirección de orientación E-O en S'Algar y Na Magrana, donde se localiza el contacto entre facies de lagoon externo y talud arrecifal. No obstante, la cartografía y análisis de los lineamientos en dicha plataforma ha permitido identificar dos familias principales con dos direcciones dominantes; NE-SO y NO-SE, siendo la dirección E-O menos representativa. Se han observado fracturas distensivas y pequeñas fallas inversas miocenas asociadas al proceso de colapso, así como fracturas y fallas postmiocenas, y fracturas cuaternarias.El estudio de la geometría en sección de los paleocolapsos pone de relieve que la formas en "V", "U" y conoidales son las más comunes. Han sido identificadas dos partes diferentes en un paleocolapso tipo: una inferior donde se observa la paleocavidad ubicada en la base del paleocolapso (lagoon externo y/o frente arrecifal), con una geometría irregular de dimensiones entre 1 m y 9 m rellena por sedimentos adyacentes y suprayacentes a ésta; y una parte superior, coincidente con los bordes de la estructura (lagoon interno/Calizas de Santanyí) buzando con inflexión conoidal hacia la paleocavidad.Se han identificado cuatro tipos de brechas (crackle, crackle-laminae-split, de mosaico y caótica) en las estructuras de paleocolapso asociadas cada una de ellas a distintos niveles estratigráficos y, en algunos paleocolapsos, con una gradación vertical y lateral. Son característicos de estos depósitos los sedimentos detríticos (matriz) y los cementos asociados (vadosos y freáticos). En general, el cemento domina sobre la matriz en la zona inferior del paleocolapso, mientras que por encima, es la matriz la que domina sobre el cemento. El análisis por difracción de Rayos X de la matriz indica para la muestra total que la calcita es el mineral principal y el cuarzo el mineral secundario. En la fracción arcilla, la moscovita, la illita y la caolinita son los minerales más comunes. De ello, junto con el estudio de láminas delgadas en estos depósitos, donde se han observado tamaños de grano en el cuarzo superior a 2 mm, se deduce un ambiente de sedimentación subsuperfical y otro subaéreo de lo que se extrae un origen, proceso de transporte y sedimentación diversos, así como la evolución cristaloquímica en determinados minerales. Los cementos son de naturaleza calcítica, con contenidos relativamente altos en magnesio para los freáticos y bajos para los vadosos. Para el estudio de la porosidad en los paleocolapsos se ha procedido a su clasificación en dos tipos principales, interclasto e intraclasto, a partir de las cuales se ha estudiado la macro y microporosidad. La brecha caótica de colapso es la que presenta volúmenes de porosidad más elevados y tipologías diversas. El análisis de isótopos estables muestra una gran homogeneidad entre la composición isotópica de los cementos, con valores en δ18O y δ13C ligeros, lo que indica condiciones análogas de precipitación, con dominio de aguas dulces sobre las saladas. Tanto la marca del oxígeno como del carbono parecen indicar que los cementos se depositaron en un período interglaciar coincidente con algún estadio isotópico impar.El estudio de la arquitectura de facies de la plataforma de Llucmajor ha permitido elaborar un modelo genético de ocurrencia para los paleocolapsos y su ubicación espacio-temporal. Dicho modelo, ha sido corroborado por la relación entre la distribución de facies y paleocolapsos en la plataforma de Santanyí, por la observación en algunos paleocolapsos de sedimentos a techo de la Unidad Calizas de Santanyí que sellan la estructura, así como por el tipo de brechas características de colapsos sinsedimentarios (brecha crackle-laminae-split), que muestran una deformación dúctil de los materiales cuando éstos no estaban completamente consolidados, dando lugar a formas laxas de bajo ángulo. Los procesos genéticos que dieron lugar a los paleocolapsos kársticos están directamente relacionados con la alta frecuencia de fluctuación del nivel del mar durante el Mioceno superior, la misma que controló la arquitectura de facies y la posición del nivel freático. Las oscilaciones del nivel freático causaron la alternancia de dominios freáticos y vadosos así como, de agua dulce y agua salada en la interfase, provocando la disolución de los parches coralinos y el posterior hundimiento del techo de las cavidades. El estudio integral de todos estos aspectos junto con el análisis de una red de paleocauces y una playa fósil, ha permitido realizar una reconstrucción paleogeográfica desde el Messiniense en la plataforma de Santanyí e identificar estructuras de paleocolapso postmiocenas y cuaternarias. Con estos datos se ha procedido a la comparación de los paleocolapsos kársticos con otras estructuras similares en el País Vasco y Las Islas de Malta, de lo que se extraen analogías y diferencias, determinadas fundamentalmente por el orden de fluctuación del nivel del mar. Por último, se discute el papel de los paleocolapsos kársticos como elementos que contribuyen en cierta medida a la ocurrencia de hidrocarburos en plataformas carbonáticas, pudiendo ser excelentes reservorios debido al gran número de afloramientos, el volumen de roca afectada y a su elevada porosidad y permeabilidad. / Paleokarst tend to differ from studies of recent and modern karst landforms though is important the genetic understanding of the karst processes for analysis a paleokarst structure. Paleokarst systems form an important class of carbonate record and they have a pronounced lateral and vertical spatial complexity that results from a complex history of formation. Most of the known karst systems are epigenetic and they are the result of near-surface karst processes during periods of subaerial exposure and latter burial compaction and diagénesis. Scale, porosity types and spatial complexities of these paleokarst systems depends on the carbonate rock solubility, paleoclimatic conditions, lowering of base level either by tectonic uplift or sea-level fall and time of subaerial exposure. Uplift, in addition, commonly induces fracturing and faulting that further control karst development. Ascertaining and predicting paleokarstic heterogeneities within carbonate rocks are strategic to fluids field development and optimum production. With current subsurface methods, however, most of the smaller-scale stratigraphic architecture and diagenetic facies are difficult to define. Predictive models for exploration and development are best made from outcrop studies of well-exposed examples. Accuracy for prediction of these models depends on the detailed understanding of the genetic factors controlling their geometries, scale, pore networks and spatial complexities of these potential karstic store. Miocene carbonates (Upper Tortonian-Lower Messinian) in Mallorca Island are composed of reefal (Reef Complex) and shallow water carbonates (Santanyí Limestone) that prograded across platforms surrounding paleoislands. The contact between the Reef Complex and the Santanyí Limestone is a subaerial erosion surface with paleokarst features. The shallow-water carbonates beds both the lagoonal beds of the Reef Complex and basal beds of the Santanyí Limestone, are affected by paleocollapse structures produced by roof collapse of caverns developed in the underlying Reefal Complex. These paleocollapse structures affecting to the carbonate platform allows to propose a genetic model to explain the origin of these paleosink, that are related to early diagenetic processes induced by high-frequency sea-level fluctuations, the same sea-level fluctuations that controlled the facies architecture of the carbonate platforms.Cartography and study of lineaments and fractures on Santanyí Platform have permitted identified two principals groups with two main directions: NE-SO and NO-SE. Have been observed distensiva fractures and Miocene small inverse faults related with de breackdwon phenomena. Moreover, postmiocenes and quaternary faults and fractures have been recognized.The geometry of paleocollapse structures is commonly (in section) as "V", "U" or funnel. The size is variable from few meters of long to thousands meters, and few meters of weigh to thirteen meters. Breccias has been classified as crackle, crackle-laminae-split, mosaic and chaotic types. Chaotic breccias grade from matrix-free, clasts-supported breccias to matrix-supported breccias. The matrix mineralogy is compose in the total sample for calcite in the major part and quartz in less quantity. However, same structures present quartz as principal mineral. To the clay fraction, caolinite, illite and moscovite are the most general mineral present.The geochimical sediment (carbonate) are filling a part of interclaste breccias porosity. This is commonly phreatic speleothems. Isotopic studies of this sediments show δ18O and δ13C contents negatives. This fact could indicate a fresh water environment deposition

Northern Canadian peatlands contain vast deposits of carbon. It is with growing urgency that we seek a better understanding of their assimilative capacity. Assimilative capacity and peat accumulation in raised bogs are linked to primary productivity of resident Sphagnum species. Understanding moisture-mediated photosynthesis of Sphagnum spp. is central to understanding peat production rates. The relationship between depth to water table fluctuation and spectral reflectance of Sphagnum moss was investigated using multispectral imaging at a recovering raised bog on the southwest coast of British Columbia, Canada. Burns Bog is a temperate oceanic ombrotrophic bog. Three ecohydrological indicator species of moss were chosen for monitoring: S. capillifolium, S. papillosum, and S. cuspidatum. Three spectral vegetation indices (SVIs) were used to characterize Sphagnum productivity: the normalized difference vegetation index 660, the chlorophyll index, and the photochemical reflectance index. In terms of spectral sensitivity and the appropriateness of SVIs to species and field setting, we found better performance for the normalized difference vegetation index 660 in the discrimination of moisture mediated species-specific reflectance signals. The role that spatiotemporal scale and spectral mixing can have on reflectance signal fidelity was tested. We were specifically interested in the relationship between changes in the local water table and Sphagnum reflectance response, and whether shifting between close spatial scales can affect the statistical strength of this relationship. We found a loss of statistical significance when shifting from the species-specific cm2 scale to the spectrally mixed dm2 scale. This spatiospectral uncoupling of the moisture mediated reflectance signal has implications for the accuracy and reliability of upscaling from plot based measurements. In terms of species-specific moisture mediated reflectance signals, we were able to effectively discriminate between the three indicator species of Sphagnum along the hummock-to-hollow gradient. We were also able to confirm Sphagnum productivity and growth outside of the vascular growing season, establishing clear patterns of reflectance correlated with changes in the local moisture regime. The strongest relationships for moisture mediated Sphagnum productivity were found in the hummock forming species S. capillifolium. Each indicator Sphagnum spp. of peat has distinct functional traits adapted to its preferred position along the ecohydrological gradient. We also discovered moisture mediated and species-specific reflectance phenologies. These phenospectral characteristics of Sphagnum can inform future monitoring work, including the creation of a regionally specific phenospectral library. It’s recommended that further close scale multispectral monitoring be carried out incorporating more species of moss, as well as invasive and upland species of concern. Pervasive vascular reflectance bias in remote sensing products has implications for the reliability of peatland modelling. Avoiding vascular bias, targeted spectral monitoring of Sphagnum indicator species provides a more reliable measure for the modelling of peatland productivity and carbon assimilation estimates. / Graduate

<p dir="ltr">The short lifespan of capacitors in power electronics converters is a significant challenge. These capacitors, often electrolytic, are vital for voltage smoothing and frequency filtering. However, their susceptibility to heat, ripple current, and aging can lead to premature faults. This can cause issues like output voltage instability and short circuits, ultimately resulting in catastrophic failure and system shutdown. Capacitors are responsible for 30% of power electronics failures.</p><p dir="ltr">To tackle this challenge, scientists, researchers, and engineers are exploring various approaches detailed in technical literature. These include exploring alternative capacitor technologies, implementing active and passive cooling solutions, and developing advanced monitoring techniques to predict and prevent failures. However, these solutions often come with drawbacks such as increased complexity, reduced efficiency, or higher upfront costs. Additionally, research in material science is ongoing to develop corrosion-resistant capacitors, but such devices are not readily available.</p><p dir="ltr">This dissertation presents a capacitorless solution for dc-dc and dc-ac converters. The proposed solution involves harnessing parasitic elements and integrating them as intrinsic components in power converter technology. This approach holds the promise of enhancing power electronics reliability ratings, thereby facilitating breakthroughs in electric vehicles, compact power processing units, and renewable energy systems. The central scientific premise of this proposal is that the capacitance requirement in a power converter can be met by deliberately augmenting parasitic components.</p><p dir="ltr">Our research hypothesis that incorporating high dielectric material-based thin-films, fabricated using nanotechnology, into planar magnetics will enable the development of a family of capacitorless electronic converters that do not rely on discrete capacitors. This innovative approach represents a departure from the traditional power converter schemes employed in industry.</p><p dir="ltr">The first family of converters introduces a novel capacitorless solid-state power filter (SSPF) for single-phase dc-ac converters. The proposed configuration, comprising a planar transformer and an H-bridge converter operating at high frequency, generates sinusoidal ac voltage without relying on capacitors. Another innovative dc-ac inverter design is the twelve step six-level inverter, which does not incorporate capacitors in its structure.</p><p dir="ltr">The second family of capacitorless topologies consists of non-isolated dc-dc converters, namely the buck converter and the buck-boost converter. These converters utilize alternative materials with high dielectric constants, such as calcium copper titanate (CCTO), to intentionally enhance specific parasitic components, notably inter capacitance. This innovative approach reduces reliance on external discrete capacitors and facilitates the development of highly reliable converters.</p><p dir="ltr">The study also includes detailed discussions on the necessary design specifications for these parasitic capacitors. Furthermore, comprehensive finite element analysis solutions and detailed circuit models are provided. A design example is presented to demonstrate the practical application of the proposed concept in electric vehicle (EV) low voltage side dc-dc power converters used to supply EVs low voltage loads.</p>